DESIGN OF GRATING COVER FOR SUMP PIT IN HRSG CHEMICAL FEEDING STATION

UNLOADING AREA

Load from One wheel of SLW30 =50KN is applied as Pressure on the 500x500 mm grating.
Pressure applied on the grating = 50/(0.5 x 0.5) = 200 KN/sqm

DESIGN OF GRATING
Span of the grating 0.5 m

Thickness of the flat 5 mm

Depth of the flat 50 mm

Spacing of the grating 30 mm

No. of Flats in 1.0 m width 33

Moment of Inertia of grating in 1.0 m width about major axis 1736111.1 mm4

Moment of Inertia of grating in 1.0 m width about minor axis 17361.1 mm4

Plastic Modulus of grating in 1.0 m width about major axis 104166.7 mm3

Area of Grating 8333.3 mm2

Loading:
Weight of the grating 0.51 KN/m
Total Dead Load 0.51 KN/m
Live Load 200 KN/m
Total live Load 200 KN/m
Total Load 200.51 KN/m

Check For Bending :

Moment due to Dead load 0.02 KNm

Factored moment due to dead load 0.02 KNm

Actual moment due to live load 6.25 KNm

Factored moment due to live load 10.00 KNm

Total Factored moment 10.02 KNm

Minimum radius of gyration of grating 1.44 mm

Spacing of lateral restraints 100 mm

Maximum Slenderness ratio 69.28

equivalent moment factor, m 1.00

Slenderness correction factor, n 0.94

Buckling parameter, u 1.00

Slenderness factor, v which allows for torsional stiffness. 1

Equivalent Slenderness ratio 65.13

Allowable Bending stress from Table - 11 of BS 5950 Part-1 154 N/mm2

Moment Carrying Capacity of grating 16.04 KNm

>10.02x1.25 Hence Safe
Check for Deflection:

Modulus of Elasticity 200000 N/mm2

Actual Deflection of the grating 0.47 mm
Allowable Deflection 2.50 mm
>0.47 mm Hence Safe
DESIGN OF GRATING COVER FOR SUMP PIT IN HRSG CHEMICAL FEEDING STATION
UNLOADING AREA
DESIGN OF GRATING
Span of the grating 0.5 m
Thickness of the flat 5 mm
Depth of the flat 50 mm
Spacing of the grating 30 mm
No. of Flats in 1.0 m width 33
Moment of Inertia of grating in 1.0 m width about major axis 1736111.1 mm4
Moment of Inertia of grating in 1.0 m width about minor axis 17361.1 mm4
Plastic Modulus of grating in 1.0 m width about major axis 104166.7 mm3
Area of Grating 8333.3 mm2

Loading:
Weight of the grating 0.51 KN/m
Total Dead Load 0.51 KN/m
Live Load 400 400 KN/m
Total live Load 400 KN/m
Total Load 400.51 KN/m

Check For Bending :

Moment due to Dead load 0.02 KNm
Factored moment due to dead load 0.02 KNm
Actual moment due to live load 12.50 KNm
Factored moment due to live load 20.00 KNm
Total Factored moment 20.02 KNm
Minimum radius of gyration of grating 1.44 mm
Spacing of lateral restraints 100 mm
Maximum Slenderness ratio 69.28
equivalent moment factor, m 1.00
Slenderness correction factor, n 0.94
Buckling parameter, u 1.00
Slenderness factor, v which allows for torsional stiffness. 1 N/mm2
Equivalent Slenderness ratio 65.13
Allowable Bending stress from Table - 11 of BS 5950 Part-1 275 N/mm2
Moment Carrying Capacity of grating 28.65 KNm
>20.020x1.25 Hence Safe
Check for Deflection:
Modulus of Elasticity 200000 N/mm2
Actual Deflection of the grating 0.94 mm
Allowable Deflection 2.50 mm
>3.87 Hence Safe

Design of Transverse Member:

Span of the member 0.03 m
Thickness of the flat 5 mm
Depth of the flat 5 mm
Moment of Inertia about major axis 52.08 mm4
Moment of Inertia about minor axis 52.08 mm4
Plastic Modulus about major axis 31.3 mm3
Area of Grating 25.0 mm2

Loading:
Weight of the Flat 0.005 x 0.005 x 0.03 x 78.5 0.0001 KN
Total Dead Load 0.0001 KN
Live Load 40.0000 KN
Total Live Load 40.0000 KN
Total Load 40.0001 KN

36
Check For Bending :
Moment due to Dead load 0.0000 KNm
Factored moment due to dead load 0.0000 KNm
Actual moment due to live load 0.0045 KNm
Factored moment due to live load 0.0072 KNm
Total Factored moment 0.0072 KNm
Minimum radius of gyration of grating 1.44 mm
Spacing of lateral restraints 30 mm
Maximum Slenderness ratio 20.78
equivalent moment factor, m 1.00
Slenderness correction factor, n 0.94
Buckling parameter, u 1.00
Slenderness factor, v which allows for torsional stiffness. 1 N/mm2
Equivalent Slenderness ratio 19.54
Allowable Bending stress from Table - 11 of BS 5950 Part-1 275 N/mm2
Moment Carrying Capacity of grating 0.01 KNm
>0.0072
Hence Safe
Check for Deflection:
Modulus of Elasticity 200000 N/mm2
Actual Deflection of the grating 0.0021600 mm
Allowable Deflection 0.08 mm

Hence Safe

37