Scribd
Upload
121 views1 page

Cobalt Alloy TIG Filler Rod Specifications

This document provides information about TIGFIL ST6 solid filler rod for cobalt alloy welding. It is a Stellite 6 grade alloy with hypoeutectic microstructure, resistance to wear and corrosion up to 650°C. It is used for applications involving wear along with heat and corrosion, such as automotive and fluid flow valves. The rod has 0.9-1.4% carbon and 26-32% chromium composition and yields a hardness of 40-46 HRc after welding. It is shielded with argon during DC electrode negative welding.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
121 views1 page

Cobalt Alloy TIG Filler Rod Specifications

This document provides information about TIGFIL ST6 solid filler rod for cobalt alloy welding. It is a Stellite 6 grade alloy with hypoeutectic microstructure, resistance to wear and corrosion up to 650°C. It is used for applications involving wear along with heat and corrosion, such as automotive and fluid flow valves. The rod has 0.9-1.4% carbon and 26-32% chromium composition and yields a hardness of 40-46 HRc after welding. It is shielded with argon during DC electrode negative welding.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

TIGFIL ST6 GTAW Cobalt Alloy

STELLITE 6 GRADE SOLID FILLER ROD

CLASSIFICATION : AWS A/SFA 5.21


ERCoCr-A
KEY FEATURES :

• Cobalt based solid filler rod • Resistance to metal to metal wear and galling
• Co-Cr-W type Stellite 6 grade alloy • Excellent resistance to corrosion, oxidation
• Hypoeutectic microstructure • Retains hot hardness at elevated temperature
• Resistance to low stress abrasive wear with upto 650OC
toughness properties

WELDING POSITION : DCEN

Shielding Gas: Ar Gas Flow Rate, LPM : 10-15

TYPICAL APPLICATIONS :
• Automotive and fluid flow valves • Applications where wear is accompanied by
• Chain saw guides, hot punches, Valve bearing elevated temperatures and corrosion
surface, roll bushings, Shear blades and extruder
screws

STORAGE / HANDLING :
Keep dry during storage and handling

CHEMICAL COMPOSITION OF BARE SOLID WIRE, Wt% :


C Mn Si Cr Ni
Specification 0.9-1.4 1.0 max 2.0 max 26.0-32.0 3.0 max
Mo Fe W Co
Specification 1.0 max 3.0 max 3.0-6.0 Balance

MECHANICAL PROPERTIES :

Condition Hardness, HRc

Specification As Welded 40-46

PACKING DATA :
Ø x L, mm Primary Box, Kg No. of Primary Boxes Net Wt. of Carton, Kg
2.4 x 1000 5 4 20
3.2 x 1000 5 4 20

PASSION FOR WELDING SINCE 1951 [Link]

59

You might also like