MODULE 3
3 LESSONS
Lesson 1. Plan and Prepare for Configuration
Lesson 2. Configure Computer System
Lesson 3. Inspect and Test Configured System
LESSON 1. Plan and Prepare for Configuration
1.1. Safety Procedures
1.2. Prepare Tools Used for Configuration
1.3. Procedures in Using System Config Tool
Unplug all cables from the rear panel
before opening the case and
performing service.
Answer
Picture Presentation
Evidence
True
Effect
omputer
System
CONFIGURATIO
N
DIAGNOSTIC
STRATEGY
UTILITIES
Tools
that
diagnose and
hardware-related
problems.
helps
solve
- Built-in to OS
- Downloadable
1. MS System Configuration
2. Register Edit
3. Direct X
4. Control Panel Applets
A tool that can
manage
the
boot
MS SYSTEM configuration repair
process and modifies
CONFIGURATIONthe configuration data
- This boot configuration
utility allows you to set the
programs that will run at
startup
and
to
edit
configuration files.
5 tabs
MICROSOFT SYSTEM CONFIGURATION
5 FUNCTIONAL TABS
1. General Tab
2. Boot Tab
3. Services Tab
4. Start Up Tab
5. Tools Tab
GENERAL TAB
- is the default tab in the System
configuration and shows how the
computer will start
LIST OF CHOICES:
- Normal StartUp
- Diagnostic StartUp
- Selective Settings
Use this mode to start
Windows after you are
Startsusing
Windows
with
done
the other
basic
services
and
two
modes
to
Starts only.
Windows
with
drivers
This mode
troubleshoot
the
basic
and
can
helpservices
rule out basic
problem.
drivers
Windowsand
filestheasother
the
services
problem. and startup
programs
that
you
select.
- It shows configuration options for the
BOOT TAB
operating Boots
system the
and Windows
advanced
debugging settings, including the
graphics
user
interface
following:
in safe mode running
Boots
the
Windows
only
critical
system
Command Prompt in
services.
Safe boot (Minimal)
safe mode running only
Boots
the
Windows
critical system services.
graphical user interface
Safe boot (Alternate Shell)
in safe mode running
Boots
the Windows
critical system
services
graphical
user
interface
and
Active
Directory.
Safe Boot (Active Directory Repair)
in safe mode running
only
critical
system
Safe boot (Network)
services.
BOOT TAB
No GUI boot
Boot Log
Base Video
OS boot
information
Make all boot
settings
permanent
Does not display Windows splash
screen when booting
Stores all information from the boot
process
Boots to the Windows graphical user
interface in minimal VGA mode
MS Configuration Command
Classification
Directions: There are five functional
tabs in MS Configuration utility,
namely General, Boot, Services,
Startup and Tools.
Classify the following items by
tabulating it to which tab they
belong to. Write your answer on a
short bond using the format
provided for you. Refer to the next
slide.
1. Event Viewer
2. Safe Boot
3. List of services that start when
computer boots
4. Make all boot settings permanent
5. Normal startup
6. No GUI Boot
7. OS Boot information
8. Hide All Microsoft Services
9. Convenient List of Diagnostic Tools
[Link] Video
GENERAL
BOOT
Safe Boot
Make all boot
settings
permanent
No GUI Boot
OS Boot
information
Base Video
SERVICES
List of services
that start when
computer boots
Hide All Microsoft
Services
STARTUP
TOOLS
Normal startup
Event Viewer
Convenient List of
Diagnostic Tools
ENRICHMENT/ASSIGNMENT
Instruction:
Form a group of five members and make a miniclip
showing and or describing the different functions of the MS
System Configuration Utility tabs.
Each group must be composed of:
- leader- one who directs the entire process of making the
clip
- linguist one who narrates the process
Use your camera to record the event stressing the
functions and descriptions of the tabs in the configuration
process.
You will be rated according to this rubric:
Criteria
Excellent (86100)
The provided
information was
necessary and
sufficient to the
computer
laboratory
safety
precautions.
Poor (70-75)
Good (76-85)
Content/Informatio
n (50%)
Technically
sound
information
Coherence of
information
The provided
information was
not necessary
or not sufficient
to the computer
laboratory
safety
precautions.
The provided
information
was, for the
most part,
necessary and
sufficient to the
computer
laboratory
safety
precautions.
Quality of Video
(30%)
Clarity and
cohesiveness
of the video
Organization
and
coherence of
ideas
It lacks clarity
and/or does not
present ideas in
a coherent way.
Most part is
well organized,
clear and
presents ideas
in a coherent
way.
The video was
well organized,
clear and
presents ideas
in a coherent
way.
Interview on
practitioner (20%)
Congruency
of questions
to the topic
Clarity of
questions
Questions were
not congruent
with the topic
and were not
delivered
clearly.
Most of the
questions were
congruent with
the topic and
delivered
clearly.
All of the
questions were
congruent with
the topic and
delivered
clearly.
