+

William Stallings
Computer Organization
and Architecture
9th Edition
+
Chapter 2
Computer Evolution and Performance
+
History of Computers
First Generation: Vacuum Tubes
 ENIAC
 Electronic Numerical Integrator And Computer
 Designed and constructed at the University of Pennsylvania
 Started in 1943 – completed in 1946
 By John Mauchly and John Eckert

 World’s first general purpose electronic digital computer

 Army’s Ballistics Research Laboratory (BRL) needed a way to supply trajectory tables for new
weapons accurately and within a reasonable time frame
 Was not finished in time to be used in the war effort

 Its first task was to perform a series of calculations that were used to help determine the
feasibility of the hydrogen bomb

 Continued to operate under BRL management until 1955 when it was disassembled
+
John von Neumann
EDVAC (Electronic Discrete Variable Computer)
 First publication of the idea was in 1945

 Stored program concept

 Attributed to ENIAC designers, most notably the mathematician John von
Neumann
 Program represented in a form suitable for storing in memory alongside
the data

 IAS computer
 Princeton Institute for Advanced Studies
 Prototype of all subsequent general-purpose computers
 Completed in 1952
Structure of von Neumann Machine
+ Registers
Memory buffer register • Contains a word to be stored in memory or sent to the I/O unit
(MBR) • Or is used to receive a word from memory or from the I/O unit

Memory address register • Specifies the address in memory of the word to be written from or read
(MAR) into the MBR

Instruction register (IR) • Contains the 8-bit opcode instruction being executed

Instruction buffer register • Employed to temporarily hold the right-hand instruction from a word in
(IBR) memory

• Contains the address of the next instruction pair to be fetched from

Program counter (PC) memory

Accumulator (AC) and • Employed to temporarily hold operands and results of ALU operations
multiplier quotient (MQ)
+
 Was the major manufacturer of
punched-card processing equipment

 Delivered its first electronic stored-

program computer (701) in 1953
 Intended primarily for scientific
applications

 Introduced 702 product in 1955

 Hardware features made it suitable
IBM
to business applications

 Series of 700/7000 computers

established IBM as the
overwhelmingly dominant
computer manufacturer
+
History of Computers
Second Generation: Transistors
 Smaller

 Cheaper

 Dissipates less heat than a vacuum tube

 Is a solid state device made from silicon

 Was invented at Bell Labs in 1947

 It was not until the late 1950’s that fully transistorized computers
were commercially available
 Table 2.2  
Computer Generations

+
Computer Generations
+
Second Generation Computers

 Introduced:  Appearance of the Digital

 More complex arithmetic and Equipment Corporation (DEC) in
logic units and control units 1957
 The use of high-level
programming languages  PDP-1 was DEC’s first computer
 Provision of system software
 This began the mini-computer
which provided the ability to:
phenomenon that would become
 load programs so prominent in the third
 move data to peripherals and generation
libraries
 perform common
computations
History of Computers
Third Generation: Integrated Circuits

 1958 – the invention of the integrated circuit

 Discrete component
 Single, self-contained transistor
 Manufactured separately, packaged in their own containers, and soldered
or wired together onto masonite-like circuit boards
 Manufacturing process was expensive and cumbersome

 The two most important members of the third generation were the
IBM System/360 and the DEC PDP-8
+
Microelectronics
+  A computer consists of gates,
Integrated memory cells, and
interconnections among these
Circuits elements

 The gates and memory cells are

 Data storage – provided by constructed of simple digital
memory cells electronic components

 Data processing – provided by  Exploits the fact that such

gates components as transistors, resistors,
and conductors can be fabricated
 Data movement – the paths among from a semiconductor such as silicon
components are used to move data
from memory to memory and from  Many transistors can be produced at
memory through gates to memory the same time on a single wafer of
silicon
 Control – the paths among
components can carry control  Transistors can be connected with a
signals processor metallization to form
circuits
Moore’s Law

1965; Gordon Moore – co-founder of Intel

Observed number of transistors that could be put

on a single chip was doubling every year

Consequences of Moore’s law:

The pace slowed to a
doubling every 18
months in the 1970’s
The cost of Computer
but has sustained computer logic
The electrical
Reduction in
path length is becomes smaller
that rate ever since and memory and is more power and Fewer interchip
shortened, convenient to use
circuitry has cooling connections
increasing in a variety of
fallen at a requirements
operating speed environments
dramatic rate
+ LSI
Large
Scale
Later Integration

Generations
VLSI
Very Large
Scale
Integration

ULSI
Semiconductor Memory Ultra Large
Microprocessors Scale
Integration
+ Semiconductor Memory

In 1970 Fairchild produced the first relatively capacious semiconductor memory

Chip was about the size of Could hold 256 bits of
Non-destructive Much faster than core
a single core memory

In 1974 the price per bit of semiconductor memory dropped below the price per bit of core
There has been a continuing and rapid decline in memory
Developments in memory and processor technologies
memory cost accompanied by a corresponding increase
changed the nature of computers in less than a decade
in physical memory density

Since 1970 semiconductor memory has been through 13 generations

Each generation has provided four times the storage density of the previous generation, accompanied by declining
cost per bit and declining access time
+
Microprocessors
 The density of elements on processor chips continued to rise
 More and more elements were placed on each chip so that fewer and fewer
chips were needed to construct a single computer processor

 1971 Intel developed 4004

 First chip to contain all of the components of a CPU on a single chip
 Birth of microprocessor

 1972 Intel developed 8008

 First 8-bit microprocessor

 1974 Intel developed 8080

 First general purpose microprocessor
 Faster, has a richer instruction set, has a large addressing capability
+
Microprocessor Speed
Techniques built into contemporary processors include:

Pipelining
• Processor moves data or instructions into a conceptual
pipe with all stages of the pipe processing
simultaneously

Branch • Processor looks ahead in the instruction code fetched

from memory and predicts which branches, or groups

prediction of instructions, are likely to be processed next

Data flow • Processor analyzes which instructions are dependent

on each other’s results, or data, to create an optimized

analysis schedule of instructions

Speculative • Using branch prediction and data flow analysis, some

processors speculatively execute instructions ahead of
their actual appearance in the program execution,

execution holding the results in temporary locations, keeping

execution engines as busy as possible
+
Many Integrated Core (MIC)
Graphics Processing Unit (GPU)
MIC GPU
 Leap in performance as well as the  Core designed to perform parallel
challenges in developing software operations on graphics data
to exploit such a large number of
cores  Traditionally found on a plug-in
graphics card, it is used to encode
 The multicore and MIC strategy and render 2D and 3D graphics as
involves a homogeneous collection well as process video
of general purpose processors on a
single chip  Used as vector processors for a
variety of applications that require
repetitive computations
+ Overview ARM
 Results of decades of design effort on
complex instruction set computers (CISCs) Intel
 Excellent example of CISC design

 Incorporates the sophisticated design

principles once found only on mainframes
and supercomputers

 An alternative approach to processor design

is the reduced instruction set computer
x86 Architecture
(RISC)

 The ARM architecture is used in a wide

variety of embedded systems and is one of
the most powerful and best designed RISC
based systems on the market

 In terms of market share Intel is ranked as CISC

the number one maker of microprocessors
for non-embedded systems
RISC
  8080
 First general purpose microprocessor
 8-bit machine with an 8-bit data path to memory
 Used in the first personal computer (Altair)

 8086
 16-bit machine
 Used an instruction cache, or queue
 First appearance of the x86 architecture

x86 Evolution  8088

 used in IBM’s first personal computer
+
 80286
 Enabled addressing a 16-MByte memory instead of just
1 MByte

 80386
 Intel’s first 32-bit machine
 First Intel processor to support multitasking

 80486
 More sophisticated cache technology and instruction
pipelining
 Built-in math coprocessor
x86 Evolution - Pentium

Pentium Pentium Pro Pentium II Pentium III Pentium 4

• Superscalar • Increased • MMX • Additional • Includes
• Multiple
instructions
executed in
+ superscalar
organization
• Aggressive
technology
• Designed
specifically to
floating-point
instructions to
support 3D
additional
floating-point
and other
parallel register process video, graphics enhancements
renaming audio, and software for multimedia
• Branch graphics data
prediction
• Data flow
analysis
• Speculative
execution
x86 Evolution (continued)

 Core
 First Intel x86 microprocessor
with a dual core, referring to the
implementation of two processors
on a single chip

 Core 2
Instruction set architecture is  Extends the architecture to 64 bits
backward
X86 architecture
compatible with
earlier versions
continues to
 Recent Core offerings have up to
dominate the 10 processors per chip
processor market
outside of
embedded
systems
 General definition: Embedded

“A combination of computer
hardware and software, and perhaps
additional mechanical or other parts,
designed to perform a dedicated Systems
function. In many cases, embedded
systems are part of a larger system or
+ product, as in the case of an antilock
braking system in a car.”