Mass Transfer Fundamentals
Ch.E- 304
Muhammad Rashed Javed
2 Diffusivities of gases and vapors
Mass Transfer Fundamentals
3
Experimental determination of diffusivities
Diffusivities of vapors are most conveniently determined by the method developed by
WlNKELMANN in which liquid is allowed to evaporate in a vertical glass tube over the top of
which a stream of vapor-free gas is passed, at a rate such that the vapor pressure is maintained
almost at zero (Figure 10.2). If the apparatus is maintained at a steady temperature, there will be
no eddy currents in the vertical tube and mass transfer will take place from the surface by
molecular diffusion alone. The rate of evaporation can be followed by the rate of fall of the liquid
surface, and since the concentration gradient is known, the diffusivity can then be calculated
Mass Transfer Fundamentals
4 Example 10.2 – Winkelmann’s Method
Mass Transfer Fundamentals
5 Solution
Mass Transfer Fundamentals
Solution
6
Mass Transfer Fundamentals
7 Solution
Mass Transfer Fundamentals
Prediction of diffusivities-
8
GILLILAND Model
Mass Transfer Fundamentals
Kopp's law of additive volumes
9
Mass Transfer Fundamentals
10 Mass transfer through a stationary second
component
Mass Transfer Fundamentals
11 Mass Transfer Velocities
Mass Transfer Fundamentals
12 Mass Transfer Velocities
As a result of the diffusional process, there is no net overall molecular flux
arising from diffusion in a binary mixture, the two components being
transferred at equal and opposite rates. In the process of equimolecular
counterdiffusion which occurs, for example, in a distillation column when the
two components have equal molar latent heats, the diffusional velocities are the
same as the velocities of the molecular species relative to the walls of the
equipment or the phase boundary.
If the physical constraints placed upon the system result in a bulk flow, the
velocities of the molecular species relative to one another remain the same, but
in order to obtain the velocity relative to a fixed point in the equipment, it is
necessary to add the bulk flow velocity. An example of a system in which there
is a bulk flow velocity is that in which one of the components is transferred
through a second component which is undergoing no net transfer, as for
example in the absorption of a soluble gas A from a mixture with an insoluble
gas B. (See Section 10.2.3). In this case, because there is no set flow of B, the
sum of its diffusional velocity and the bulk flow velocity must be zero.
Mass Transfer Fundamentals
13 Mass Transfer Velocities
Mass Transfer Fundamentals
14 General case for gas-phase mass transfer in a
binary mixture
Whatever the physical constraints placed on the system, the diffusional
process causes the two components to be transferred at equal and
opposite rates and the values of the diffusional velocities UDA and UDB
given in Section 10.2.5 are always applicable. It is the bulk flow velocity
up which changes with imposed conditions and which gives rise to
differences in overall mass transfer rates. In equimolecular
counterdiffusipn, up is zero, In the absorption of a soluble gas A from a
mixture t he bulk velocity must be equal and opposite to the diffusional
velocity of B as this latter component undergoes no net transfer.
In general, for any component:
Total transfer = Transfer by diffusion + Transfer by bulk flow.
Mass Transfer Fundamentals
General case for gas-phase mass
15
transfer in a binary mixture
Mass Transfer Fundamentals
General case for gas-phase mass
16
transfer in a binary mixture
Mass Transfer Fundamentals
General case for gas-phase mass
17
transfer in a binary mixture
Mass Transfer Fundamentals
18 Diffusion as a mass flux
Mass Transfer Fundamentals
19 Diffusion as a mass flux
Mass Transfer Fundamentals
