Tags: svg

Earlier this year I wrote about some performance improvements to The Session using the content-visibility property in CSS.

If you say content-visibility: auto you’re telling the browser not to bother calculating the layout and paint for an element until it needs to. But you need to combine it with the contain-intrinsic-block-size property so that the browser knows how much space to leave for the element.

I mentioned the browser support:

Right now content-visibility is only supported in Chrome and Edge. But that’s okay. This is a progressive enhancement. Adding this CSS has no detrimental effect on the browsers that don’t understand it (and when they do ship support for it, it’ll just start working).

Well, that’s happened! Safari 18 supports content-visibility. I didn’t have to do a thing and it just started working.

But …I think I’ve discovered a little bug in Safari’s implementation.

(I say I think it’s a bug with the browser because, like Jim, I’ve made the mistake in the past of thinking I had discovered a browser bug when in fact it was something caused by a browser extension. And when I say “in the past”, I mean yesterday.)

So here’s the issue: if you apply content-visibility: auto to an element that contains an SVG, and that SVG contains a text element, then Safari never paints that text to the screen.

To see an example, take a look at the fourth setting of Cooley’s reel on The Session archive. There’s a text element with the word “slide” (actually the text is inside a tspan element inside a text element). On Safari, that text never shows up.

I’m using a link to the archive of The Session I created recently rather than the live site because on the live site I’ve removed the content-visibility declaration for Safari until this bug gets resolved.

I’ve also created a reduced test case on Codepen. The only HTML is the element containing the SVGs. The only CSS—apart from the content-visibility stuff—is just a little declaration to push the content below the viewport so you have to scroll it into view (which is when the bug happens).

I’ve filed a bug report. I know it’s a fairly niche situation, but there are some other issues with Safari’s implementation of content-visibility so it’s possible that they’re all related.

Printing music with CSS grid

Laying out sheet music with CSS grid—sounds extreme until you see it abstracted into a web component.

We need fluid and responsive music rendering for the web!

I wrote a little while back about improving performance on The Session by reducing runtime JavaScript in favour of caching on the server. This is on the pages for tunes, where the SVGs for the sheetmusic are now inlined instead of being generated on the fly.

It worked. But I also wrote:

A page like that with lots of sheetmusic and plenty of comments is going to have a hefty page weight and a large DOM size. I’ve still got a fair bit of main-thread work happening, but now the bulk of it is style and layout, whereas previously I had the JavaScript overhead on top of that.

Take a tune like Out On The Ocean. It has 27 settings. That’s a lot of SVG markup that needs to be parsed, styled and rendered, even if it’s inline.

Then I remembered a very handy CSS property called content-visibility:

It enables the user agent to skip an element’s rendering work (including layout and painting) until it is needed — which makes the initial page load much faster.

Sounds great! But there are two gotchas.

The first gotcha is that if a browser doesn’t paint the element, it doesn’t know how much space the element should take up. So you need to provide dimensions. At the very least you need to provide a height value. Otherwise when the element comes into view and gets rendered, it pushes down on the content below it. You’d see a sudden jump in the scrollbar position.

The solution is to provide a value for contain-intrinsic-size. If your content is dynamic—from, say, a CMS—then you’re out of luck. You don’t know how long the content is.

Luckily, in my case, I could take a stab at it. I know how many lines of sheetmusic there are for each tune setting. Each line takes up roughly the same amount of space. If I multiply that amount of space by the number of lines then I’ve got a pretty good approximation of the height of the sheetmusic. I apply this with the contain-intrinsic-block-size property.

So each piece of sheetmusic has an inline style attribute with declarations like this:

content-visibility: auto;
contain-intrinsic-block-size: 380px;

It works a treat. I did a before-and-after check with pagespeed insights on the page for Out On The Ocean. The “style and layout” part of the main thread work went down considerably. Total blocking time went from more than 600 milliseconds to less than 400 milliseconds.

Not a bad result for a little bit of CSS!

I said there was a second gotcha. That’s browser support.

Right now content-visibility is only supported in Chrome and Edge. But that’s okay. This is a progressive enhancement. Adding this CSS has no detrimental effect on the browsers that don’t understand it (and when they do ship support for it, it’ll just start working). I’ve said it before and I’ll say it again: the forgiving error-parsing in HTML and CSS is a killer feature of the web. Browsers just ignore what they don’t understand. That’s what makes progressive enhancement like this possible.

And actually, there’s something you can do for all browsers. Even browsers that don’t support content-visibility still understand containment. So they’ll understand contain-intrinsic-size. Pair that with a contain declaration like this to tell the browser that this chunk of content isn’t going to reflow or get repainted:

contain: layout paint;

Here’s what MDN says about contain:

The contain CSS property indicates that an element and its contents are, as much as possible, independent from the rest of the document tree. Containment enables isolating a subsection of the DOM, providing performance benefits by limiting calculations of layout, style, paint, size, or any combination to a DOM subtree rather than the entire page.

So if you’ve got a chunk of static content, you might as well apply contain to it.

Again, not bad for a little bit of CSS!

I had a lot of fun making the website for Patterns Day.

If you’re interested in the tech stack, here’s what I used:

1. HTML
2. CSS

Actually, technically it’s all HTML because the styles are inside a style element rather than a separate style sheet, but you know what I mean. Also, there is technically some JavaScript but all it does is register a service worker that takes care of caching and going offline.

I didn’t use any build tools. There was no pipeline. There is no node_modules folder filling up my hard drive. Nothing was automated. The website was hand-crafted the long hard stupid way.

I started with the content. I wrote out the words and marked them up with the most appropriate HTML elements.

Time to layer on the presentation.

For the design, I turned to Michelle for help. I gave her a brief, describing the vibe of the conference, and asked her to come up with an appropriate visual language.

Crucially, I asked her not to design a website. Instead I asked her to think about other places where this design language might be used: a poster, social media, anything but a website.

Partly I was doing this for my own benefit. If you give me a pixel-perfect design for a web page and tell me to code it up, either I won’t do it or I won’t enjoy it. I just don’t get any motivation out of that kind of direct one-to-one translation.

But give me guardrails, give me constraints, give me boundary conditions, and off I go!

Michelle was very gracious in dealing with such a finicky client as myself (“Can you try this other direction?”, “Hmm… I think I preferred the first one after all!”) She delivered a colour palette, a type scale, typeface choices, and some wonderful tiling patterns …it is Patterns Day after all!

With just a few extra lines of CSS, the basic typography was in place.

I started layering on the colours. Even though this was a one-page site, I still made liberal use of custom properties in the CSS. It just feels good to be able to update one value and see the results, well …cascade.

I had a lot of fun with the tiling background images. SVG was the perfect format for these. And because the tiles were so small in file size, I just inlined them straight into the CSS.

By this point, I felt like I was truly designing in the browser. Adjusting spacing, playing around with layout, and all that squishy stuff. Some of the best results came from happy accidents—the way that certain elements behaved at certain screen sizes would lead me into little experiments that yielded interesting results.

I’m not sure it’s possible to engineer that kind of serendipity in Figma. Figma was the perfect tool for exploring ideas around the visual vocabulary, and for handing over design decisions around colour, typography, and texture. But when it comes to how the content is going to behave on the World Wide Web, nothing beats a browser for fidelity.

By this point I was really sweating the details, like getting the logo just right and adjusting the type scale for different screen sizes. Needless to say, Utopia was a godsend for that.

I was also checking back in with Michelle to get her take on design decisions I was making.

I could’ve kept tinkering but the diminishing returns were a sign that it was time to put this out into the world.

It felt really good to work on a web page like this. It felt like I was getting my hands into the soil of the web. I don’t think it’s an accident that the result turned out to be very performant.

Getting hands-on like this stops me from getting rusty. And honestly, working with CSS these days is a joy. There’s such power to be had from using var() in combination with functions like calc() and clamp(). Layout is a breeze with flexbox and grid. Browser differences are practically non-existent. We’ve never had it so good.

Here’s something I noticed about my relationship to CSS; my brain has finally made the switch to logical properties. Now if I’m looking at some CSS and I see left, right, top, or bottom, it looks like a bug to me. Those directional properties feel loaded with assumptions whereas logical properties feel much more like working with the grain of the web.

Performance is a high priority for me with The Session. It needs to work for people all over the world using all kinds of devices.

My main strategy for ensuring good performance is to diligently apply progressive enhancement. The core content is available to any device that can render HTML.

To keep things performant, I’ve avoided as many assets (or, more accurately, liabilities) as possible. No uneccessary images. No superfluous JavaScript libraries. Not even any web fonts (gasp!). And definitely no third-party resources.

The pay-off is a speedy site. If you want to see lab data, run a page from The Session through lighthouse. To see field data, take a look at data from Chrome UX Report (Crux).

But the devil is in the details. Even though most pages on The Session are speedy, the outliers have bothered me for a while.

Take a typical tune page on the site. The data is delivered from the server as HTML, which loads nice and quick. That data includes the notes for the tune settings, written in ABC notation, a nice lightweight text format.

Then the enhancement happens. Using Paul Rosen’s brilliant abcjs JavaScript library, those ABCs are converted into SVG sheetmusic.

So on tune pages there’s an additional download for that JavaScript library. That’s not so bad though—I’m using a service worker to cache that file so there’ll only ever be one initial network request.

If a tune has just a few different versions, the page remains nice and zippy. But if a tune has lots of settings, the computation starts to add up. Converting all those settings from ABC to SVG starts to take a cumulative toll on the main thread.

I pondered ways to avoid that conversion step. Was there some way of pre-generating the SVGs on the server rather than doing it all on the client?

In theory, yes. I could spin up a headless browser, run the JavaScript and take a snapshot. But that’s a bit beyond my backend programming skills, so I’ve taken a slightly different approach.

The first time anyone hits a tune page, the ABCs getting converted to SVGs as usual. But now there’s one additional step. I grab the generated markup and send it as an Ajax payload to an endpoint on my server. That endpoint stores the sheetmusic as a file in a cache.

Next time someone hits that page, there’s a server-side check to see if the sheetmusic has been cached. If it has, send that down the wire embedded directly in the HTML.

The idea is that over time, most of the sheetmusic on the site will transition from being generated in the browser to being stored on the server.

So far it’s working out well.

Take a really popular tune like The Lark In The Morning. There are twenty settings, and each one has four parts. Previously that would have resulted in a few seconds of parsing and rendering time on the main thread. Now everything is delivered up-front.

I’m not out of the woods. A page like that with lots of sheetmusic and plenty of comments is going to have a hefty page weight and a large DOM size. I’ve still got a fair bit of main-thread work happening, but now the bulk of it is style and layout, whereas previously I had the JavaScript overhead on top of that.

I’ll keep working on it. But overall, the speed improvement is great. A typical tune page is now very speedy indeed.

It’s like a microcosm of web performance in general: respect your users’ time, network connection and battery life. If that means shifting the work from the browser to the server, do it!

While I’m talking about the SVGs on The Session, I thought I’d share something else related to the rendering of the sheet music.

Like I said, I use the brilliant abcjs JavaScript library. It converts ABC notation into sheet music on the fly, which still blows my mind.

If you view source on the rendered SVG, you’ll see that the path and rect elements have been hard-coded with a colour value of #000000. That makes sense. You’d want to display sheet music on a light background, probably white. So it seems like a safe assumption.

Ah, but when it comes to front-end development, assumptions are like little hidden bombs just waiting to go off!

I got an email the other day:

Hi Jeremy,

I have vision problems, so I need to use high-contrast mode (using Windows 11). In high-contrast mode, the sheet-music view is just black!

Doh! All my CSS adapts just fine to high-contrast mode, but those hardcoded hex values in the SVG aren’t going to be affected by high-contrtast mode.

Stepping back, the underlying problem was that I didn’t have a full separation of concerns. Most of my styling information was in my CSS, but not all. Those hex values in the SVG should really be encoded in my style sheet.

I couldn’t remove the hardcoded hex values—not without messing around with JavaScript beyond my comprehension—so I made the fix in CSS:

[fill="#000000"] {
  fill: currentColor;
}
[stroke="#000000"] {
  stroke: currentColor;
}

That seemed to do the trick. I wrote back to the person who had emailed me, and they were pleased as punch:

Well done, Thanks!  The staff, dots, etc. all appear as white on a black background.  When I click “Print”, it looks like it still comes out black on a white background, as expected.

I’m very grateful that they brought the issue to my attention. If they hadn’t, that assumption would still be lying in wait, preparing to ambush someone else.

Two weeks ago, I wrote:

I woke up today to a very annoying new bug in Firefox. The browser shits the bed in an unpredictable fashion when rounding up single pixel line widths in SVG. That’s quite a problem on The Session where all the sheet music is rendered in SVG. Those thin lines in sheet music are kind of important.

Paul Rosen, who makes abcjs, the JavaScript library that renders sheet music on The Session, managed to get a fix out pretty quickly. But I use an older version of the library and updating it would introduce some side-effects that would take me a while to work around. So that option wasn’t available to me.

In this situation, when the problem is caused by a browser bug, the correct course of action is to file a bug with the browser. That had already been done. Now all I could do was twiddle my thumbs and wait for the next release of the browser, which would hopefully ship with the fix.

But I figured I may as well try to find a temporary workaround in the meantime.

At first, I looked at diving into the internals of the JavaScript—that’s where the instructions are given for drawing the SVGs.

But then I stopped and thought, “If the problem is with the rendering of the SVG, maybe CSS can help.”

I started messing around with SVG-specific CSS properties like stroke, fill, and so on. With dev tools open, I started targeting the paths that acted as bar lines in the sheet music, playing around with widths, opacities, and fills.

It was the debugging equivalent of throwing spaghetti at the wall. Remarkably, it actually worked.

I found a solution with this nonsensical bit of CSS:

stroke: currentColor;
stroke-opacity: 0;

For some reason, rather than making all the barlines disappear, this ensured they were visible.

It’s the worst kind of hacky fix—the kind where you have no idea why it works, but it does.

So I shipped it.

And at pretty much exactly the same time, a new version of Firefox dropped …with the bug fixed.

I can’t deny that there was a certain satisfaction in being able to work around a browser bug. But there’s much more satisfaction in deleting the hacky workaround when it’s no longer needed.

Remix Icon - Open source icon library

I love how easy it is to use these icons: you can copy and paste the SVG or even get it encoded as a data URL.

Basic Pattern Repository

A nice little collection of very simple—and very lightweight—SVGs to use as background patterns.

PlymouthPress – A Letterpress Image Font

An experimental image font made using the University of Plymouth’s unique letterpress workshop.

Grungy!

The font is intended for display purposes only, and not is suitable for body text.

Swipey image grids.

This is how you write up a technique! Cassie takes an SVG pattern she used on the Clearleft “services” page and explains it in step-by-step detail, complete with explanatory animated diagrams.

Good, Better, Best: Untangling The Complex World Of Accessible Patterns — Smashing Magazine

I really like the approach that Carie takes here. Instead of pointing to specific patterns to use, she provides a framework for evaluating technology. Solutions come and go but this kind of critical thinking is a long-lasting skill.

I added a dark mode to my site last year. Since then I’ve been idly toying with the addition of a dark mode to The Session too.

As with this site, the key to adding a dark mode was switching to custom properties for color and background-color declarations. But my plans kept getting derailed by the sheet music on the site. The sheet music is delivered as SVG generated by ABCJS which hard-codes the colour in stroke and fill attributes:

fill="#000000" stroke="#000000"

When I was describing CSS recently I mentioned the high specifity of inline styles:

Whereas external CSS and embedded CSS don’t have any effect on specificity, inline styles are positively radioactive with specificity.

Given that harsh fact of life, I figured it would be nigh-on impossible to over-ride the colour of the sheetmusic. But then I realised I was an idiot.

The stroke and fill attributes in SVG are presentational but they aren’t inline styles. They’re attributes. They have no affect on specifity. I can easily over-ride them in an external style sheet.

In fact, if I had actually remembered what I wrote when I was adding a dark mode to adactio.com, I could’ve saved myself some time:

I have SVGs of sparklines on my homepage. The SVG has a hard-coded colour value in the stroke attribute of the path element that draws the sparkline. Fortunately, this can be over-ridden in the style sheet:

svg.activity-sparkline path {
  stroke: var(--text-color);
}

I was able to do something similar on The Session. I used the handy currentColor keyword in CSS so that the sheet music matched the colour of the text:

svg path {
  fill: currentColor;
}
svg path:not(stroke="none") {
  stroke: currentColor;
}

Et voila! I now had light-on-dark sheet music for The Session’s dark mode all wrapped up in a prefers-color-scheme: dark media query.

I pushed out out the new feature and started getting feedback. It could be best summarised as “Thanks. I hate it.”

It turns out that while people were perfectly fine with a dark mode that inverts the colours of text, it felt really weird and icky to do the same with sheet music.

On the one hand, this seems odd. After all, sheet music is a writing system like any other. If you’re fine with light text on a dark background, why doesn’t that hold for light sheet music on a dark background?

But on the other hand, sheet music is also like an image. And we don’t invert the colours of our images when we add a dark mode to our CSS.

With that in mind, I went back to the drawing board and this time treated the sheet music SVGs as being intrinsicly dark-on-light, rather than a stylistic choice. It meant a few more CSS rules, but I’m happy with the final result. You can see it in action by visiting a tune page and toggling your device’s “appearance” settings between light and dark.

If you’re a member of The Session, I also added a toggle switch to your member profile so you can choose dark or light mode regardless of your device settings.

Static sites, slack and scrollytelling. | Clearleft

Cassie’s enthusiasm for fun and interesting SVG animation shines through in her writing!

Google font to SVG path

Cassie pointed me to this very nifty tool (that she plans to use in your SVG animation workshop): choose font from Google Fonts, type some text, and get the glyphs immediately translated into an SVG!

Lea Verou on Twitter

Now that all modern browsers support SVG favicons, here’s how to turn any emoji into a favicon.svg:

<svg xmlns="http://w3.org/2000/svg" viewBox="0 0 100 100"> <text y=".9em" font-size="90"> 💩 </text> </svg>

Useful for quick apps when you can’t be bothered to design a favicon!

Motion Paths - Past, Present and Future | Codrops

This is superbly in-depth and easy-to-follow article from Cassie—everything you need to know about motion paths in SVG and CSS! It’s worth reading just for the wonderful examples.

Interactive web animation with SVG by Cassie Evans | CSSCAMP 2019 - YouTube

Cassie’s excellent talk on SVG animation is well worth your time.

SVG Artista

A handy tool for tweaking the animations in your SVGs.

Creating my logo animation - cassie.codes

What a wonderfully in-depth and clear tutorial from Cassie on how she created the animation for her nifty SVG logo!

Also: Cassie is on the indie web now, writing on her own website—yay!