ROS IndexPackages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | ur_robot_driver |
The new driver for Universal Robots UR3, UR5 and UR10 robots with CB3 controllers and the e-series.
The new driver for Universal Robots UR3, UR5 and UR10 robots with CB3 controllers and the e-series.
|
|
| 1 | 2024-12-04 | ur_moveit_config |
An example package with MoveIt2 configurations for UR robots.
An example package with MoveIt2 configurations for UR robots.
|
|
| 2 | 2024-12-04 | ur_dashboard_msgs |
Messages around the UR Dashboard server.
Messages around the UR Dashboard server.
|
|
| 1 | 2024-12-04 | ur_controllers |
Provides controllers that use the speed scaling interface of Universal Robots.
Provides controllers that use the speed scaling interface of Universal Robots.
|
|
| 2 | 2024-12-04 | ur_calibration |
Package for extracting the factory calibration from a UR robot and change it such that it can be used by ur_description to gain a correct URDF
Package for extracting the factory calibration from a UR robot and change it such that it can be used by ur_description to gain a correct URDF
|
|
| 2 | 2024-12-04 | ur_bringup |
Launch file and run-time configurations, e.g. controllers.
Launch file and run-time configurations, e.g. controllers.
|
|
| 1 | 2024-12-04 | ur |
Metapackage for universal robots
Metapackage for universal robots
|
|
| 2 | 2024-12-04 | rc_reason_msgs |
Msg and srv definitions for rc_reason_clients
Msg and srv definitions for rc_reason_clients
|
|
| 2 | 2024-12-04 | rc_reason_clients |
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
|
|
| 2 | 2024-12-04 | mvsim |
A lightweight multivehicle simulation framework.
A lightweight multivehicle simulation framework.
|
|
| 1 | 2024-12-04 | mola_lidar_odometry |
LIDAR odometry system based on MOLA and MRPT components
LIDAR odometry system based on MOLA and MRPT components
|
|
| 1 | 2024-12-04 | ecal |
eCAL - enhanced Communication Abstraction Layer. A fast publish-subscribe cross-plattform middleware using Shared Memory and UDP.
eCAL - enhanced Communication Abstraction Layer. A fast publish-subscribe cross-plattform middleware using Shared Memory and UDP.
|
|
| 1 | 2024-12-04 | coal |
An extension of the Flexible Collision Library.
An extension of the Flexible Collision Library.
|
|
| 1 | 2024-12-03 | zstd_vendor |
Zstd compression vendor package, providing a dependency for Zstd.
Zstd compression vendor package, providing a dependency for Zstd.
|
|
| 2 | 2024-12-03 | velocity_controllers |
Generic controller for forwarding commands.
Generic controller for forwarding commands.
|
|
| 3 | 2024-12-03 | ur_description |
URDF description for Universal Robots
URDF description for Universal Robots
|
|
| 1 | 2024-12-03 | tricycle_steering_controller |
Steering controller with tricycle kinematics. Rear fixed wheels are powering the vehicle and front wheel is steering.
Steering controller with tricycle kinematics. Rear fixed wheels are powering the vehicle and front wheel is steering.
|
|
| 1 | 2024-12-03 | tricycle_controller |
Controller for a tricycle drive mobile base
Controller for a tricycle drive mobile base
|
|
| 2 | 2024-12-03 | transmission_interface |
transmission_interface contains data structures for representing mechanical transmissions, methods for propagating values between actuator and joint spaces and tooling to support this.
transmission_interface contains data structures for representing mechanical transmissions, methods for propagating values between actuator and joint spaces and tooling to support this.
|
|
| 1 | 2024-12-03 | steering_controllers_library |
Package for steering robot configurations including odometry and interfaces.
Package for steering robot configurations including odometry and interfaces.
|
|
| 1 | 2024-12-03 | sqlite3_vendor |
SQLite 3 vendor package
SQLite 3 vendor package
|
|
| 1 | 2024-12-03 | shared_queues_vendor |
Vendor package for concurrent queues from moodycamel
Vendor package for concurrent queues from moodycamel
|
|
| 1 | 2024-12-03 | self_test |
self_test
self_test
|
|
| 2 | 2024-12-03 | rqt_joint_trajectory_controller |
Graphical frontend for interacting with joint_trajectory_controller instances.
Graphical frontend for interacting with joint_trajectory_controller instances.
|
|
| 2 | 2024-12-03 | rqt_controller_manager |
Graphical frontend for interacting with the controller manager.
Graphical frontend for interacting with the controller manager.
|
|
| 1 | 2024-12-03 | rosbag2_transport |
Layer encapsulating ROS middleware to allow rosbag2 to be used with or without middleware
Layer encapsulating ROS middleware to allow rosbag2 to be used with or without middleware
|
|
| 1 | 2024-12-03 | rosbag2_tests |
Tests package for rosbag2
Tests package for rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_test_common |
Commonly used test helper classes and fixtures for rosbag2
Commonly used test helper classes and fixtures for rosbag2
|
|
| 2 | 2024-12-03 | rosbag2_storage_mcap_testdata |
message definition test fixtures for MCAP schema recording
message definition test fixtures for MCAP schema recording
|
|
| 2 | 2024-12-03 | rosbag2_storage_mcap |
rosbag2 storage plugin using the MCAP file format
rosbag2 storage plugin using the MCAP file format
|
|
| 1 | 2024-12-03 | rosbag2_storage_default_plugins |
ROSBag2 SQLite3 storage plugin
ROSBag2 SQLite3 storage plugin
|
|
| 1 | 2024-12-03 | rosbag2_storage |
ROS2 independent storage format to store serialized ROS2 messages
ROS2 independent storage format to store serialized ROS2 messages
|
|
| 1 | 2024-12-03 | rosbag2_py |
Python API for rosbag2
Python API for rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_performance_benchmarking |
Code to benchmark rosbag2
Code to benchmark rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_interfaces |
Interface definitions for controlling rosbag2
Interface definitions for controlling rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_cpp |
C++ ROSBag2 client library
C++ ROSBag2 client library
|
|
| 1 | 2024-12-03 | rosbag2_compression_zstd |
Zstandard compression library implementation of rosbag2_compression
Zstandard compression library implementation of rosbag2_compression
|
|
| 1 | 2024-12-03 | rosbag2_compression |
Compression implementations for rosbag2 bags and messages.
Compression implementations for rosbag2 bags and messages.
|
|
| 1 | 2024-12-03 | rosbag2 |
Meta package for rosbag2 related packages
Meta package for rosbag2 related packages
|
|
| 1 | 2024-12-03 | ros_industrial_cmake_boilerplate |
Contains boilerplate cmake script, macros and utils
Contains boilerplate cmake script, macros and utils
|
|
| 1 | 2024-12-03 | ros2controlcli |
The ROS 2 command line tools for ROS2 Control.
The ROS 2 command line tools for ROS2 Control.
|
|
| 1 | 2024-12-03 | ros2bag |
Entry point for rosbag in ROS 2
Entry point for rosbag in ROS 2
|
|
| 1 | 2024-12-03 | ros2_controllers_test_nodes |
Demo nodes for showing and testing functionalities of the ros2_control framework.
Demo nodes for showing and testing functionalities of the ros2_control framework.
|
|
| 1 | 2024-12-03 | ros2_controllers |
Metapackage for ros2_controllers related packages
Metapackage for ros2_controllers related packages
|
|
| 1 | 2024-12-03 | ros2_control_test_assets |
The package provides shared test resources for ros2_control stack
The package provides shared test resources for ros2_control stack
|
|
| 1 | 2024-12-03 | ros2_control |
Metapackage for ROS2 control related packages
Metapackage for ROS2 control related packages
|
|
| 1 | 2024-12-03 | realtime_tools |
Contains a set of tools that can be used from a hard
realtime thread, without breaking the realtime behavior.
Contains a set of tools that can be used from a hard
realtime thread, without breaking the realtime behavior.
|
|
| 1 | 2024-12-03 | range_sensor_broadcaster |
Controller to publish readings of range sensors.
Controller to publish readings of range sensors.
|
|
| 1 | 2024-12-03 | python_mrpt |
Python wrapper for Mobile Robot Programming Toolkit (MRPT) libraries
Python wrapper for Mobile Robot Programming Toolkit (MRPT) libraries
|
|
| 2 | 2024-12-03 | position_controllers |
Generic controller for forwarding commands.
Generic controller for forwarding commands.
|
|
| 1 | 2024-12-03 | pose_broadcaster |
Broadcaster to publish cartesian states.
Broadcaster to publish cartesian states.
|
|
| 1 | 2024-12-03 | pinocchio |
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
|
|
| 1 | 2024-12-03 | pid_controller |
Controller based on PID implememenation from control_toolbox package.
Controller based on PID implememenation from control_toolbox package.
|
|
| 1 | 2024-12-03 | osrf_pycommon |
Commonly needed Python modules, used by Python software developed at OSRF.
Commonly needed Python modules, used by Python software developed at OSRF.
|
|
| 1 | 2024-12-03 | mrpt_libtclap |
Mobile Robot Programming Toolkit (MRPT) libraries (tclap C++ library).
This package contains: mrpt-tclap
Mobile Robot Programming Toolkit (MRPT) libraries (tclap C++ library).
This package contains: mrpt-tclap
|
|
| 1 | 2024-12-03 | mrpt_libslam |
Mobile Robot Programming Toolkit (MRPT) libraries (slam/vision C++ libraries).
This package contains: mrpt-slam, mrpt-vision
Mobile Robot Programming Toolkit (MRPT) libraries (slam/vision C++ libraries).
This package contains: mrpt-slam, mrpt-vision
|
|
| 1 | 2024-12-03 | mrpt_libros_bridge |
Mobile Robot Programming Toolkit (MRPT) libraries (ros2bridge C++ library).
This package contains: mrpt-ros2bridge
Mobile Robot Programming Toolkit (MRPT) libraries (ros2bridge C++ library).
This package contains: mrpt-ros2bridge
|
|
| 1 | 2024-12-03 | mrpt_libposes |
Mobile Robot Programming Toolkit (MRPT) libraries (poses C++ libraries).
This package contains: mrpt-poses, mrpt-tfest, mrpt-bayes
Mobile Robot Programming Toolkit (MRPT) libraries (poses C++ libraries).
This package contains: mrpt-poses, mrpt-tfest, mrpt-bayes
|
|
| 1 | 2024-12-03 | mrpt_libopengl |
Mobile Robot Programming Toolkit (MRPT) libraries (opengl/img C++ libraries).
This package contains: mrpt-opengl, mrpt-img
Mobile Robot Programming Toolkit (MRPT) libraries (opengl/img C++ libraries).
This package contains: mrpt-opengl, mrpt-img
|
|
| 1 | 2024-12-03 | mrpt_libobs |
Mobile Robot Programming Toolkit (MRPT) libraries (obs C++ libraries).
This package contains: mrpt-obs, mrpt-topography
Mobile Robot Programming Toolkit (MRPT) libraries (obs C++ libraries).
This package contains: mrpt-obs, mrpt-topography
|
|
| 1 | 2024-12-03 | mrpt_libnav |
Mobile Robot Programming Toolkit (MRPT) libraries (nav C++ libraries).
This package contains: mrpt-nav, mrpt-kinematics
Mobile Robot Programming Toolkit (MRPT) libraries (nav C++ libraries).
This package contains: mrpt-nav, mrpt-kinematics
|
|
| 1 | 2024-12-03 | mrpt_libmath |
Mobile Robot Programming Toolkit (MRPT) libraries (math C++ libraries).
This package contains: mrpt-math
Mobile Robot Programming Toolkit (MRPT) libraries (math C++ libraries).
This package contains: mrpt-math
|
|
| 1 | 2024-12-03 | mrpt_libmaps |
Mobile Robot Programming Toolkit (MRPT) libraries (maps C++ libraries).
This package contains: mrpt-maps, mrpt-graphs
Mobile Robot Programming Toolkit (MRPT) libraries (maps C++ libraries).
This package contains: mrpt-maps, mrpt-graphs
|
|
| 1 | 2024-12-03 | mrpt_libhwdrivers |
Mobile Robot Programming Toolkit (MRPT) libraries (hwdrivers C++ libraries).
This package contains: mrpt-hwdrivers, mrpt-comms
Mobile Robot Programming Toolkit (MRPT) libraries (hwdrivers C++ libraries).
This package contains: mrpt-hwdrivers, mrpt-comms
|
|
| 1 | 2024-12-03 | mrpt_libgui |
Mobile Robot Programming Toolkit (MRPT) libraries (GUI C++ libraries).
This package contains: mrpt-gui, nanogui
Mobile Robot Programming Toolkit (MRPT) libraries (GUI C++ libraries).
This package contains: mrpt-gui, nanogui
|
|
| 1 | 2024-12-03 | mrpt_libbase |
Mobile Robot Programming Toolkit (MRPT) libraries (core C++ libraries).
This package contains: mrpt-io, mrpt-serialization, mrpt-random, mrpt-system, mrpt-rtti, mrpt-containers, mrpt-typemeta, mrpt-core, mrpt-random, mrpt-config, mrpt-expr
Mobile Robot Programming Toolkit (MRPT) libraries (core C++ libraries).
This package contains: mrpt-io, mrpt-serialization, mrpt-random, mrpt-system, mrpt-rtti, mrpt-containers, mrpt-typemeta, mrpt-core, mrpt-random, mrpt-config, mrpt-expr
|
|
| 1 | 2024-12-03 | mrpt_libapps |
Mobile Robot Programming Toolkit (MRPT) libraries (apps C++ libraries).
This package contains: mrpt-apps lib, mrpt-graphslam
Mobile Robot Programming Toolkit (MRPT) libraries (apps C++ libraries).
This package contains: mrpt-apps lib, mrpt-graphslam
|
|
| 1 | 2024-12-03 | mrpt_apps |
Mobile Robot Programming Toolkit (MRPT) applications
Mobile Robot Programming Toolkit (MRPT) applications
|
|
| 2 | 2024-12-03 | mcap_vendor |
mcap vendor package
mcap vendor package
|
|
| 3 | 2024-12-03 | joint_trajectory_controller |
Controller for executing joint-space trajectories on a group of joints
Controller for executing joint-space trajectories on a group of joints
|
|
| 1 | 2024-12-03 | joint_state_broadcaster |
Broadcaster to publish joint state
Broadcaster to publish joint state
|
|
| 2 | 2024-12-03 | joint_limits_interface |
Interface for enforcing joint limits.
Interface for enforcing joint limits.
|
|
| 1 | 2024-12-03 | joint_limits |
Interfaces for handling of joint limits for controllers or hardware.
Interfaces for handling of joint limits for controllers or hardware.
|
|
| 1 | 2024-12-03 | imu_sensor_broadcaster |
Controller to publish readings of IMU sensors.
Controller to publish readings of IMU sensors.
|
|
| 1 | 2024-12-03 | hardware_interface_testing |
ros2_control hardware interface testing
ros2_control hardware interface testing
|
|
| 2 | 2024-12-03 | hardware_interface |
ros2_control hardware interface
ros2_control hardware interface
|
|
| 1 | 2024-12-03 | gripper_controllers |
The gripper_controllers package
The gripper_controllers package
|
|
| 2 | 2024-12-03 | forward_command_controller |
Generic controller for forwarding commands.
Generic controller for forwarding commands.
|
|
| 1 | 2024-12-03 | force_torque_sensor_broadcaster |
Controller to publish state of force-torque sensors.
Controller to publish state of force-torque sensors.
|
|
| 1 | 2024-12-03 | etsi_its_vam_ts_msgs |
ROS messages for ETSI ITS VAM (TS)
ROS messages for ETSI ITS VAM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_vam_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS VAMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS VAMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_vam_ts_coding |
C++ compatible C source code for ETSI ITS VAMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS VAMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_spatem_ts_msgs |
ROS messages for ETSI ITS SPATEM (TS)
ROS messages for ETSI ITS SPATEM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_spatem_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS SPATEMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS SPATEMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_spatem_ts_coding |
C++ compatible C source code for ETSI ITS SPATEMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS SPATEMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_rviz_plugins |
RViz plugin for ROS 2 messages based on ETSI ITS messages
RViz plugin for ROS 2 messages based on ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_primitives_conversion |
Conversion functions for converting ROS primitives to and from ASN.1-encoded primitives
Conversion functions for converting ROS primitives to and from ASN.1-encoded primitives
|
|
| 1 | 2024-12-03 | etsi_its_msgs_utils |
ROS messages and utility functions for ETSI ITS messages
ROS messages and utility functions for ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_msgs |
ROS messages for ETSI ITS messages
ROS messages for ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_messages |
ROS support for ETSI ITS messages
ROS support for ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_mapem_ts_msgs |
ROS messages for ETSI ITS MAPEM (TS)
ROS messages for ETSI ITS MAPEM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_mapem_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS MAPEMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS MAPEMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_mapem_ts_coding |
C++ compatible C source code for ETSI ITS MAPEMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS MAPEMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_denm_msgs |
ROS messages for ETSI ITS DENM
ROS messages for ETSI ITS DENM
|
|
| 1 | 2024-12-03 | etsi_its_denm_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS DENMs
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS DENMs
|
|
| 1 | 2024-12-03 | etsi_its_denm_coding |
C++ compatible C source code for ETSI ITS DENMs generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS DENMs generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_cpm_ts_msgs |
ROS messages for ETSI ITS CPM (TS)
ROS messages for ETSI ITS CPM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cpm_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CPMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CPMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cpm_ts_coding |
C++ compatible C source code for ETSI ITS CPMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS CPMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_conversion |
Converts ROS messages to and from ASN.1-encoded ETSI ITS messages
Converts ROS messages to and from ASN.1-encoded ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_coding |
C++ compatible C source code for ETSI ITS messages generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS messages generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_cam_ts_msgs |
ROS messages for ETSI ITS CAM (TS)
ROS messages for ETSI ITS CAM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cam_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cam_ts_coding |
C++ compatible C source code for ETSI ITS CAMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS CAMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_cam_msgs |
ROS messages for ETSI ITS CAM
ROS messages for ETSI ITS CAM
|
|
| 1 | 2024-12-03 | etsi_its_cam_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs
|
|
| 1 | 2024-12-03 | etsi_its_cam_coding |
C++ compatible C source code for ETSI ITS CAMs generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS CAMs generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | eigenpy |
Bindings between Numpy and Eigen using Boost.Python
Bindings between Numpy and Eigen using Boost.Python
|
|
| 2 | 2024-12-03 | effort_controllers |
Generic controller for forwarding commands.
Generic controller for forwarding commands.
|
|
| 2 | 2024-12-03 | diff_drive_controller |
Controller for a differential-drive mobile base.
Controller for a differential-drive mobile base.
|
|
| 1 | 2024-12-03 | diagnostics |
diagnostics
diagnostics
|
|
| 1 | 2024-12-03 | diagnostic_updater |
diagnostic_updater contains tools for easily updating diagnostics. it is commonly used in device drivers to keep track of the status of output topics, device status, etc.
diagnostic_updater contains tools for easily updating diagnostics. it is commonly used in device drivers to keep track of the status of output topics, device status, etc.
|
|
| 1 | 2024-12-03 | diagnostic_common_diagnostics |
diagnostic_common_diagnostics
diagnostic_common_diagnostics
|
|
| 1 | 2024-12-03 | diagnostic_aggregator |
diagnostic_aggregator
diagnostic_aggregator
|
|
| 1 | 2024-12-03 | depthai_ros_msgs |
Package to keep interface independent of the driver
Package to keep interface independent of the driver
|
|
| 1 | 2024-12-03 | depthai_ros_driver |
Depthai ROS Monolithic node.
Depthai ROS Monolithic node.
|
|
| 1 | 2024-12-03 | depthai_filters |
Depthai filters package
Depthai filters package
|
|
| 1 | 2024-12-03 | depthai_examples |
The depthai_examples package
The depthai_examples package
|
|
| 1 | 2024-12-03 | depthai_descriptions |
The depthai_descriptions package
The depthai_descriptions package
|
|
| 1 | 2024-12-03 | depthai_bridge |
The depthai_bridge package
The depthai_bridge package
|
|
| 1 | 2024-12-03 | depthai-ros |
The depthai-ros package
The depthai-ros package
|
|
| 1 | 2024-12-03 | crane_plus_moveit_config |
CRANE+ V2 move_group config package
CRANE+ V2 move_group config package
|
|
| 1 | 2024-12-03 | crane_plus_gazebo |
CRANE+ V2 gazebo simulation package
CRANE+ V2 gazebo simulation package
|
|
| 1 | 2024-12-03 | crane_plus_examples |
CRANE+ V2 examples package
CRANE+ V2 examples package
|
|
| 1 | 2024-12-03 | crane_plus_description |
CRANE+ V2 description package
CRANE+ V2 description package
|
|
| 1 | 2024-12-03 | crane_plus_control |
CRANE+ V2 control package
CRANE+ V2 control package
|
|
| 1 | 2024-12-03 | crane_plus |
ROS 2 package suite of CRANE+ V2
ROS 2 package suite of CRANE+ V2
|
|
| 2 | 2024-12-03 | controller_manager_msgs |
Messages and services for the controller manager.
Messages and services for the controller manager.
|
|
| 2 | 2024-12-03 | controller_manager |
Description of controller_manager
Description of controller_manager
|
|
| 2 | 2024-12-03 | controller_interface |
Description of controller_interface
Description of controller_interface
|
|
| 1 | 2024-12-03 | bicycle_steering_controller |
Steering controller with bicycle kinematics. Rear fixed wheel is powering the vehicle and front wheel is steering.
Steering controller with bicycle kinematics. Rear fixed wheel is powering the vehicle and front wheel is steering.
|
|
| 1 | 2024-12-03 | admittance_controller |
Implementation of admittance controllers for different input and output interface.
Implementation of admittance controllers for different input and output interface.
|
|
| 2 | 2024-12-03 | ackermann_steering_controller |
Steering controller for Ackermann kinematics. Rear fixed wheels are powering the vehicle and front wheels are steering it.
Steering controller for Ackermann kinematics. Rear fixed wheels are powering the vehicle and front wheels are steering it.
|
|
| 2 | 2024-12-02 | vision_opencv |
Packages for interfacing ROS2 with OpenCV, a library of programming functions for real time computer vision.
Packages for interfacing ROS2 with OpenCV, a library of programming functions for real time computer vision.
|
|
| 3 | 2024-12-02 | ur_msgs |
Message and service definitions for interacting with Universal Robots robot controllers.
Message and service definitions for interacting with Universal Robots robot controllers.
|
|
| 1 | 2024-12-02 | turtlebot3_manipulation_teleop |
Ros2 Package of the turtlebot3_manipulation_teleop
Ros2 Package of the turtlebot3_manipulation_teleop
|
|
| 1 | 2024-12-02 | turtlebot3_manipulation_navigation2 |
ROS 2 launch scripts for navigation2
ROS 2 launch scripts for navigation2
|
|
| 1 | 2024-12-02 | turtlebot3_manipulation_moveit_config |
An automatically generated package with all the configuration and launch files for using the turtlebot3_manipulation with the MoveIt Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the turtlebot3_manipulation with the MoveIt Motion Planning Framework
|
|
| 1 | 2024-12-02 | turtlebot3_manipulation_hardware |
ROS 2 package for turtlebot3_manipulation_hardware
ROS 2 package for turtlebot3_manipulation_hardware
|
|
| 1 | 2024-12-02 | turtlebot3_manipulation_description |
ROS 2 package for turtlebot3_manipulation_description
ROS 2 package for turtlebot3_manipulation_description
|
|
| 1 | 2024-12-02 | turtlebot3_manipulation_cartographer |
ROS 2 launch scripts for cartographer
ROS 2 launch scripts for cartographer
|
|
| 1 | 2024-12-02 | turtlebot3_manipulation_bringup |
ROS 2 package for turtlebot3_manipulation
ROS 2 package for turtlebot3_manipulation
|
|
| 1 | 2024-12-02 | turtlebot3_manipulation |
ROS 2 package for turtlebot3_manipulation
ROS 2 package for turtlebot3_manipulation
|
|
| 1 | 2024-12-02 | tiago_rgbd_sensors |
Launch files and scripts needed to bring up the ROS nodes of a TIAGo robot.
Launch files and scripts needed to bring up the ROS nodes of a TIAGo robot.
|
|
| 1 | 2024-12-02 | tiago_navigation |
TIAGo navigation metapackage
TIAGo navigation metapackage
|
|
| 1 | 2024-12-02 | tiago_laser_sensors |
Launch files and scripts needed to bring up the ROS nodes of a TIAGo robot.
Launch files and scripts needed to bring up the ROS nodes of a TIAGo robot.
|
|
| 1 | 2024-12-02 | tiago_2dnav |
TIAGo-specific launch files needed to run navigation on a TIAGo robot.
TIAGo-specific launch files needed to run navigation on a TIAGo robot.
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 1 | 2024-12-02 | pmb2_simulation |
PMB2-specific simulation components. These include plugins
and launch scripts necessary for running PMB2 in simulation.
PMB2-specific simulation components. These include plugins
and launch scripts necessary for running PMB2 in simulation.
|
|
| 1 | 2024-12-02 | pmb2_rgbd_sensors |
pmb2-specific RGBD sensors module and params files.
pmb2-specific RGBD sensors module and params files.
|
|
| 1 | 2024-12-02 | pmb2_navigation |
PMB2 navigation metapackage
PMB2 navigation metapackage
|
|
| 1 | 2024-12-02 | pmb2_multi |
The pmb2_multi package
The pmb2_multi package
|
|
| 1 | 2024-12-02 | pmb2_laser_sensors |
Launch files and scripts needed to bring up the ROS nodes of a PMB2 robot.
Launch files and scripts needed to bring up the ROS nodes of a PMB2 robot.
|
|
| 1 | 2024-12-02 | pmb2_gazebo |
Simulation files for the PMB2 robot.
Simulation files for the PMB2 robot.
|
|
| 1 | 2024-12-02 | pmb2_2dnav |
PMB2-specific launch files needed to run
navigation on the PMB2 robot.
PMB2-specific launch files needed to run
navigation on the PMB2 robot.
|
|
| 2 | 2024-12-02 | opencv_tests |
OpenCV tests for the Python and C++ implementations of CvBridge with Image message in ROS2.
OpenCV tests for the Python and C++ implementations of CvBridge with Image message in ROS2.
|
|
| 1 | 2024-12-02 | omni_base_simulation |
The omni_base_simulation package
The omni_base_simulation package
|
|
| 1 | 2024-12-02 | omni_base_rgbd_sensors |
omni_base-specific RGBD sensors module and params files.
omni_base-specific RGBD sensors module and params files.
|
|
| 1 | 2024-12-02 | omni_base_navigation |
The omni_base Navigatgion metapackage
The omni_base Navigatgion metapackage
|
|
| 1 | 2024-12-02 | omni_base_laser_sensors |
omni_base-specific laser sensors launch and config files.
omni_base-specific laser sensors launch and config files.
|
|
| 1 | 2024-12-02 | omni_base_gazebo |
The omni_base_gazebo package
The omni_base_gazebo package
|
|
| 1 | 2024-12-02 | omni_base_2dnav |
omni_base-specific launch files needed to run
navigation on the omni_base robot.
omni_base-specific launch files needed to run
navigation on the omni_base robot.
|
|
| 1 | 2024-12-02 | neo_simulation2 |
ROS-2 Simulation packages for neobotix robots
ROS-2 Simulation packages for neobotix robots
|
|
| 1 | 2024-12-02 | launch_pal |
Utilities for launch files
Utilities for launch files
|
|
| 3 | 2024-12-02 | image_geometry |
`image_geometry` contains C++ and Python libraries for interpreting images
geometrically. It interfaces the calibration parameters in sensor_msgs/CameraInfo
messages with OpenCV functions such as image rectification, much as cv_bridge
interfaces ROS sensor_msgs/Image with OpenCV data types.
`image_geometry` contains C++ and Python libraries for interpreting images
geometrically. It interfaces the calibration parameters in sensor_msgs/CameraInfo
messages with OpenCV functions such as image rectification, much as cv_bridge
interfaces ROS sensor_msgs/Image with OpenCV data types.
|
|
| 1 | 2024-12-02 | gtsam |
gtsam
gtsam
|
|
| 1 | 2024-12-02 | cv_bridge |
This contains CvBridge, which converts between ROS2
Image messages and OpenCV images.
This contains CvBridge, which converts between ROS2
Image messages and OpenCV images.
|
|
| 1 | 2024-12-02 | control_toolbox |
The control toolbox contains modules that are useful across all controllers.
The control toolbox contains modules that are useful across all controllers.
|
|
| 1 | 2024-12-02 | as2_visualization |
Aerostack2 Visualization Tools
Aerostack2 Visualization Tools
|
|
| 1 | 2024-12-02 | as2_usb_camera_interface |
USB camera driver
USB camera driver
|
|
| 1 | 2024-12-02 | as2_state_estimator |
Basic state estimator for AeroStack2
Basic state estimator for AeroStack2
|
|
| 1 | 2024-12-02 | as2_rviz_plugins |
A very simple plugin for RViz.
A very simple plugin for RViz.
|
|
| 1 | 2024-12-02 | as2_realsense_interface |
Intel Realsense cameras driver
Intel Realsense cameras driver
|
|
| 1 | 2024-12-02 | as2_python_api |
AeroStack2 drone interface tool in python
AeroStack2 drone interface tool in python
|
|
| 1 | 2024-12-02 | as2_platform_multirotor_simulator |
Lightweight simulator
Lightweight simulator
|
|
| 1 | 2024-12-02 | as2_platform_gazebo |
Package to communicate Gazebo Simulator with Aerostack2 framework
Package to communicate Gazebo Simulator with Aerostack2 framework
|
|
| 1 | 2024-12-02 | as2_msgs |
Messages, services and action files for the AS2 stack
Messages, services and action files for the AS2 stack
|
|
| 1 | 2024-12-02 | as2_motion_reference_handlers |
Motion handlers to ease the control of the UAVs inside the Aerostack2 framework
Motion handlers to ease the control of the UAVs inside the Aerostack2 framework
|
|
| 1 | 2024-12-02 | as2_motion_controller |
AS2 Controller Package
AS2 Controller Package
|
|
| 1 | 2024-12-02 | as2_map_server |
Aerostack2 map server node for mapping the environment
Aerostack2 map server node for mapping the environment
|
|
| 1 | 2024-12-02 | as2_keyboard_teleoperation |
Keyboard Teleoperation
Keyboard Teleoperation
|
|
| 1 | 2024-12-02 | as2_geozones |
Geozones for AeroStack2
Geozones for AeroStack2
|
|
| 1 | 2024-12-02 | as2_gazebo_assets |
Ignition Gazebo resources
Ignition Gazebo resources
|
|
| 1 | 2024-12-02 | as2_external_object_to_tf |
Adds external objects pose to tf
Adds external objects pose to tf
|
|
| 1 | 2024-12-02 | as2_core |
Aerostack2 core package which contains the basic classes of the Aerostack2 framework
Aerostack2 core package which contains the basic classes of the Aerostack2 framework
|
|
| 1 | 2024-12-02 | as2_cli |
AS2 CLI Package
AS2 CLI Package
|
|
| 1 | 2024-12-02 | as2_behaviors_trajectory_generation |
Aerostack behaviors collection for trajectory generation
Aerostack behaviors collection for trajectory generation
|
|
| 1 | 2024-12-02 | as2_behaviors_platform |
Aerostack2 core package which contains launchers for the basic behaviors
Aerostack2 core package which contains launchers for the basic behaviors
|
|
| 1 | 2024-12-02 | as2_behaviors_perception |
ArUco detector behavior
ArUco detector behavior
|
|
| 1 | 2024-12-02 | as2_behaviors_path_planning |
Aerostack2 behaviors collection for path planning
Aerostack2 behaviors collection for path planning
|
|
| 1 | 2024-12-02 | as2_behaviors_motion |
AS2 Movement Behaviors Behaviors Meta Package
AS2 Movement Behaviors Behaviors Meta Package
|
|
| 1 | 2024-12-02 | as2_behavior_tree |
AS2 behavior trees
AS2 behavior trees
|
|
| 1 | 2024-12-02 | as2_behavior |
Aerostack2 Behavior Class
Aerostack2 Behavior Class
|
|
| 1 | 2024-12-02 | as2_alphanumeric_viewer |
Alphanumeric Viewer
Alphanumeric Viewer
|
|
| 1 | 2024-12-02 | aerostack2 |
Aerostack2 is a ROS2-based framework for the development of autonomous systems for aerial robotics.
Aerostack2 is a ROS2-based framework for the development of autonomous systems for aerial robotics.
|
|
| 1 | 2024-12-01 | rtabmap |
RTAB-Map's standalone library. RTAB-Map is a RGB-D SLAM approach with real-time constraints.
RTAB-Map's standalone library. RTAB-Map is a RGB-D SLAM approach with real-time constraints.
|
|
| 1 | 2024-12-01 | kinematics_interface_kdl |
KDL implementation of ros2_control kinematics interface
KDL implementation of ros2_control kinematics interface
|
|
| 1 | 2024-12-01 | kinematics_interface |
Kinematics interface for ROS 2 control
Kinematics interface for ROS 2 control
|
|
| 1 | 2024-12-01 | gazebo_ros2_control_demos |
gazebo_ros2_control_demos
gazebo_ros2_control_demos
|
|
| 1 | 2024-12-01 | gazebo_ros2_control |
gazebo_ros2_control
gazebo_ros2_control
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | rc_reason_msgs |
Msg and srv definitions for rc_reason_clients
Msg and srv definitions for rc_reason_clients
|
|
| 2 | 2024-12-04 | rc_reason_clients |
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
|
|
| 1 | 2024-12-04 | py_trees |
Pythonic implementation of behaviour trees.
Pythonic implementation of behaviour trees.
|
|
| 2 | 2024-12-04 | mvsim |
A lightweight multivehicle simulation framework.
A lightweight multivehicle simulation framework.
|
|
| 1 | 2024-12-04 | mola_lidar_odometry |
LIDAR odometry system based on MOLA and MRPT components
LIDAR odometry system based on MOLA and MRPT components
|
|
| 1 | 2024-12-04 | eiquadprog |
Eiquadprog a QP solver using active sets
Eiquadprog a QP solver using active sets
|
|
| 1 | 2024-12-04 | ecal |
eCAL - enhanced Communication Abstraction Layer. A fast publish-subscribe cross-plattform middleware using Shared Memory and UDP.
eCAL - enhanced Communication Abstraction Layer. A fast publish-subscribe cross-plattform middleware using Shared Memory and UDP.
|
|
| 1 | 2024-12-04 | coal |
An extension of the Flexible Collision Library.
An extension of the Flexible Collision Library.
|
|
| 1 | 2024-12-03 | test_bond |
Contains tests for [[bond]], including tests for [[bondcpp]].
Contains tests for [[bond]], including tests for [[bondcpp]].
|
|
| 1 | 2024-12-03 | smclib |
The State Machine Compiler (SMC) from http://smc.sourceforge.net/
converts a language-independent description of a state machine
into the source code to support that state machine.
This package contains the libraries that a compiled state machine
depends on, but it does not contain the compiler itself.
The State Machine Compiler (SMC) from http://smc.sourceforge.net/
converts a language-independent description of a state machine
into the source code to support that state machine.
This package contains the libraries that a compiled state machine
depends on, but it does not contain the compiler itself.
|
|
| 1 | 2024-12-03 | self_test |
self_test
self_test
|
|
| 1 | 2024-12-03 | ros_industrial_cmake_boilerplate |
Contains boilerplate cmake script, macros and utils
Contains boilerplate cmake script, macros and utils
|
|
| 1 | 2024-12-03 | robot_calibration_msgs |
Messages for calibrating a robot
Messages for calibrating a robot
|
|
| 1 | 2024-12-03 | robot_calibration |
Calibrate a Robot
Calibrate a Robot
|
|
| 1 | 2024-12-03 | realtime_tools |
Contains a set of tools that can be used from a hard
realtime thread, without breaking the realtime behavior.
Contains a set of tools that can be used from a hard
realtime thread, without breaking the realtime behavior.
|
|
| 1 | 2024-12-03 | python_mrpt |
Python wrapper for Mobile Robot Programming Toolkit (MRPT) libraries
Python wrapper for Mobile Robot Programming Toolkit (MRPT) libraries
|
|
| 1 | 2024-12-03 | pinocchio |
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
|
|
| 1 | 2024-12-03 | osrf_pycommon |
Commonly needed Python modules, used by Python software developed at OSRF.
Commonly needed Python modules, used by Python software developed at OSRF.
|
|
| 1 | 2024-12-03 | mrpt_libtclap |
Mobile Robot Programming Toolkit (MRPT) libraries (tclap C++ library).
This package contains: mrpt-tclap
Mobile Robot Programming Toolkit (MRPT) libraries (tclap C++ library).
This package contains: mrpt-tclap
|
|
| 1 | 2024-12-03 | mrpt_libslam |
Mobile Robot Programming Toolkit (MRPT) libraries (slam/vision C++ libraries).
This package contains: mrpt-slam, mrpt-vision
Mobile Robot Programming Toolkit (MRPT) libraries (slam/vision C++ libraries).
This package contains: mrpt-slam, mrpt-vision
|
|
| 1 | 2024-12-03 | mrpt_libros_bridge |
Mobile Robot Programming Toolkit (MRPT) libraries (ros2bridge C++ library).
This package contains: mrpt-ros2bridge
Mobile Robot Programming Toolkit (MRPT) libraries (ros2bridge C++ library).
This package contains: mrpt-ros2bridge
|
|
| 1 | 2024-12-03 | mrpt_libposes |
Mobile Robot Programming Toolkit (MRPT) libraries (poses C++ libraries).
This package contains: mrpt-poses, mrpt-tfest, mrpt-bayes
Mobile Robot Programming Toolkit (MRPT) libraries (poses C++ libraries).
This package contains: mrpt-poses, mrpt-tfest, mrpt-bayes
|
|
| 1 | 2024-12-03 | mrpt_libopengl |
Mobile Robot Programming Toolkit (MRPT) libraries (opengl/img C++ libraries).
This package contains: mrpt-opengl, mrpt-img
Mobile Robot Programming Toolkit (MRPT) libraries (opengl/img C++ libraries).
This package contains: mrpt-opengl, mrpt-img
|
|
| 1 | 2024-12-03 | mrpt_libobs |
Mobile Robot Programming Toolkit (MRPT) libraries (obs C++ libraries).
This package contains: mrpt-obs, mrpt-topography
Mobile Robot Programming Toolkit (MRPT) libraries (obs C++ libraries).
This package contains: mrpt-obs, mrpt-topography
|
|
| 1 | 2024-12-03 | mrpt_libnav |
Mobile Robot Programming Toolkit (MRPT) libraries (nav C++ libraries).
This package contains: mrpt-nav, mrpt-kinematics
Mobile Robot Programming Toolkit (MRPT) libraries (nav C++ libraries).
This package contains: mrpt-nav, mrpt-kinematics
|
|
| 1 | 2024-12-03 | mrpt_libmath |
Mobile Robot Programming Toolkit (MRPT) libraries (math C++ libraries).
This package contains: mrpt-math
Mobile Robot Programming Toolkit (MRPT) libraries (math C++ libraries).
This package contains: mrpt-math
|
|
| 1 | 2024-12-03 | mrpt_libmaps |
Mobile Robot Programming Toolkit (MRPT) libraries (maps C++ libraries).
This package contains: mrpt-maps, mrpt-graphs
Mobile Robot Programming Toolkit (MRPT) libraries (maps C++ libraries).
This package contains: mrpt-maps, mrpt-graphs
|
|
| 1 | 2024-12-03 | mrpt_libhwdrivers |
Mobile Robot Programming Toolkit (MRPT) libraries (hwdrivers C++ libraries).
This package contains: mrpt-hwdrivers, mrpt-comms
Mobile Robot Programming Toolkit (MRPT) libraries (hwdrivers C++ libraries).
This package contains: mrpt-hwdrivers, mrpt-comms
|
|
| 1 | 2024-12-03 | mrpt_libgui |
Mobile Robot Programming Toolkit (MRPT) libraries (GUI C++ libraries).
This package contains: mrpt-gui, nanogui
Mobile Robot Programming Toolkit (MRPT) libraries (GUI C++ libraries).
This package contains: mrpt-gui, nanogui
|
|
| 1 | 2024-12-03 | mrpt_libbase |
Mobile Robot Programming Toolkit (MRPT) libraries (core C++ libraries).
This package contains: mrpt-io, mrpt-serialization, mrpt-random, mrpt-system, mrpt-rtti, mrpt-containers, mrpt-typemeta, mrpt-core, mrpt-random, mrpt-config, mrpt-expr
Mobile Robot Programming Toolkit (MRPT) libraries (core C++ libraries).
This package contains: mrpt-io, mrpt-serialization, mrpt-random, mrpt-system, mrpt-rtti, mrpt-containers, mrpt-typemeta, mrpt-core, mrpt-random, mrpt-config, mrpt-expr
|
|
| 1 | 2024-12-03 | mrpt_libapps |
Mobile Robot Programming Toolkit (MRPT) libraries (apps C++ libraries).
This package contains: mrpt-apps lib, mrpt-graphslam
Mobile Robot Programming Toolkit (MRPT) libraries (apps C++ libraries).
This package contains: mrpt-apps lib, mrpt-graphslam
|
|
| 1 | 2024-12-03 | mrpt_apps |
Mobile Robot Programming Toolkit (MRPT) applications
Mobile Robot Programming Toolkit (MRPT) applications
|
|
| 1 | 2024-12-03 | etsi_its_vam_ts_msgs |
ROS messages for ETSI ITS VAM (TS)
ROS messages for ETSI ITS VAM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_vam_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS VAMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS VAMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_vam_ts_coding |
C++ compatible C source code for ETSI ITS VAMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS VAMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_spatem_ts_msgs |
ROS messages for ETSI ITS SPATEM (TS)
ROS messages for ETSI ITS SPATEM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_spatem_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS SPATEMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS SPATEMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_spatem_ts_coding |
C++ compatible C source code for ETSI ITS SPATEMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS SPATEMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_rviz_plugins |
RViz plugin for ROS 2 messages based on ETSI ITS messages
RViz plugin for ROS 2 messages based on ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_primitives_conversion |
Conversion functions for converting ROS primitives to and from ASN.1-encoded primitives
Conversion functions for converting ROS primitives to and from ASN.1-encoded primitives
|
|
| 1 | 2024-12-03 | etsi_its_msgs_utils |
ROS messages and utility functions for ETSI ITS messages
ROS messages and utility functions for ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_msgs |
ROS messages for ETSI ITS messages
ROS messages for ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_messages |
ROS support for ETSI ITS messages
ROS support for ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_mapem_ts_msgs |
ROS messages for ETSI ITS MAPEM (TS)
ROS messages for ETSI ITS MAPEM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_mapem_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS MAPEMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS MAPEMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_mapem_ts_coding |
C++ compatible C source code for ETSI ITS MAPEMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS MAPEMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_denm_msgs |
ROS messages for ETSI ITS DENM
ROS messages for ETSI ITS DENM
|
|
| 1 | 2024-12-03 | etsi_its_denm_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS DENMs
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS DENMs
|
|
| 1 | 2024-12-03 | etsi_its_denm_coding |
C++ compatible C source code for ETSI ITS DENMs generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS DENMs generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_cpm_ts_msgs |
ROS messages for ETSI ITS CPM (TS)
ROS messages for ETSI ITS CPM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cpm_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CPMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CPMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cpm_ts_coding |
C++ compatible C source code for ETSI ITS CPMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS CPMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_conversion |
Converts ROS messages to and from ASN.1-encoded ETSI ITS messages
Converts ROS messages to and from ASN.1-encoded ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_coding |
C++ compatible C source code for ETSI ITS messages generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS messages generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_cam_ts_msgs |
ROS messages for ETSI ITS CAM (TS)
ROS messages for ETSI ITS CAM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cam_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cam_ts_coding |
C++ compatible C source code for ETSI ITS CAMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS CAMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_cam_msgs |
ROS messages for ETSI ITS CAM
ROS messages for ETSI ITS CAM
|
|
| 1 | 2024-12-03 | etsi_its_cam_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs
|
|
| 1 | 2024-12-03 | etsi_its_cam_coding |
C++ compatible C source code for ETSI ITS CAMs generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS CAMs generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | eigenpy |
Bindings between Numpy and Eigen using Boost.Python
Bindings between Numpy and Eigen using Boost.Python
|
|
| 1 | 2024-12-03 | diagnostics |
diagnostics
diagnostics
|
|
| 1 | 2024-12-03 | diagnostic_updater |
diagnostic_updater contains tools for easily updating diagnostics. it is commonly used in device drivers to keep track of the status of output topics, device status, etc.
diagnostic_updater contains tools for easily updating diagnostics. it is commonly used in device drivers to keep track of the status of output topics, device status, etc.
|
|
| 1 | 2024-12-03 | diagnostic_common_diagnostics |
diagnostic_common_diagnostics
diagnostic_common_diagnostics
|
|
| 1 | 2024-12-03 | diagnostic_aggregator |
diagnostic_aggregator
diagnostic_aggregator
|
|
| 1 | 2024-12-03 | bondpy |
Python implementation of bond, a mechanism for checking when
another process has terminated.
Python implementation of bond, a mechanism for checking when
another process has terminated.
|
|
| 1 | 2024-12-03 | bondcpp |
C++ implementation of bond, a mechanism for checking when
another process has terminated.
C++ implementation of bond, a mechanism for checking when
another process has terminated.
|
|
| 1 | 2024-12-03 | bond_core |
A bond allows two processes, A and B, to know when the other has
terminated, either cleanly or by crashing. The bond remains
connected until it is either broken explicitly or until a
heartbeat times out.
A bond allows two processes, A and B, to know when the other has
terminated, either cleanly or by crashing. The bond remains
connected until it is either broken explicitly or until a
heartbeat times out.
|
|
| 1 | 2024-12-03 | bond |
A bond allows two processes, A and B, to know when the other has
terminated, either cleanly or by crashing. The bond remains
connected until it is either broken explicitly or until a
heartbeat times out.
A bond allows two processes, A and B, to know when the other has
terminated, either cleanly or by crashing. The bond remains
connected until it is either broken explicitly or until a
heartbeat times out.
|
|
| 3 | 2024-12-02 | ur_msgs |
Message and service definitions for interacting with Universal Robots robot controllers.
Message and service definitions for interacting with Universal Robots robot controllers.
|
|
| 1 | 2024-12-02 | tf2_2d |
A set of 2D geometry classes modeled after the 3D geometry classes in tf2.
A set of 2D geometry classes modeled after the 3D geometry classes in tf2.
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 1 | 2024-12-02 | gtsam |
gtsam
gtsam
|
|
| 1 | 2024-12-02 | control_toolbox |
The control toolbox contains modules that are useful across all controllers.
The control toolbox contains modules that are useful across all controllers.
|
|
| 1 | 2024-12-01 | kinematics_interface_kdl |
KDL implementation of ros2_control kinematics interface
KDL implementation of ros2_control kinematics interface
|
|
| 1 | 2024-12-01 | kinematics_interface |
Kinematics interface for ROS 2 control
Kinematics interface for ROS 2 control
|
|
| 1 | 2024-12-01 | control_msgs |
control_msgs contains base messages and actions useful for
controlling robots. It provides representations for controller
setpoints and joint and cartesian trajectories.
control_msgs contains base messages and actions useful for
controlling robots. It provides representations for controller
setpoints and joint and cartesian trajectories.
|
|
| 1 | 2024-11-30 | pick_ik |
Inverse Kinematics solver for MoveIt
Inverse Kinematics solver for MoveIt
|
|
| 2 | 2024-11-29 | pilz_industrial_motion_planner_testutils |
Helper scripts and functionality to test industrial motion generation
Helper scripts and functionality to test industrial motion generation
|
|
| 2 | 2024-11-29 | pilz_industrial_motion_planner |
MoveIt plugin to generate industrial trajectories PTP, LIN, CIRC and sequences thereof.
MoveIt plugin to generate industrial trajectories PTP, LIN, CIRC and sequences thereof.
|
|
| 2 | 2024-11-29 | moveit_visual_tools |
Helper functions for displaying and debugging MoveIt data in Rviz via published markers
Helper functions for displaying and debugging MoveIt data in Rviz via published markers
|
|
| 3 | 2024-11-29 | moveit_simple_controller_manager |
A generic, simple controller manager plugin for MoveIt.
A generic, simple controller manager plugin for MoveIt.
|
|
| 1 | 2024-11-29 | moveit_setup_srdf_plugins |
SRDF-based plugins for MoveIt Setup Assistant
SRDF-based plugins for MoveIt Setup Assistant
|
|
| 1 | 2024-11-29 | moveit_setup_simulation |
MoveIt Setup Steps for Simulation
MoveIt Setup Steps for Simulation
|
|
| 1 | 2024-11-29 | moveit_setup_framework |
C++ Interface for defining setup steps for MoveIt Setup Assistant
C++ Interface for defining setup steps for MoveIt Setup Assistant
|
|
| 1 | 2024-11-29 | moveit_setup_core_plugins |
Core (meta) plugins for MoveIt Setup Assistant
Core (meta) plugins for MoveIt Setup Assistant
|
|
| 1 | 2024-11-29 | moveit_setup_controllers |
MoveIt Setup Steps for ROS 2 Control
MoveIt Setup Steps for ROS 2 Control
|
|
| 3 | 2024-11-29 | moveit_setup_assistant |
Generates a configuration package that makes it easy to use MoveIt
Generates a configuration package that makes it easy to use MoveIt
|
|
| 1 | 2024-11-29 | moveit_setup_app_plugins |
Various specialty plugins for MoveIt Setup Assistant
Various specialty plugins for MoveIt Setup Assistant
|
|
| 2 | 2024-11-29 | moveit_servo |
Provides real-time manipulator Cartesian and joint servoing.
Provides real-time manipulator Cartesian and joint servoing.
|
|
| 2 | 2024-11-29 | moveit_runtime |
moveit_runtime meta package contains MoveIt packages that are essential for its runtime (e.g. running MoveIt on robots).
moveit_runtime meta package contains MoveIt packages that are essential for its runtime (e.g. running MoveIt on robots).
|
|
| 3 | 2024-11-29 | moveit_ros_warehouse |
Components of MoveIt connecting to MongoDB
Components of MoveIt connecting to MongoDB
|
|
| 3 | 2024-11-29 | moveit_ros_visualization |
Components of MoveIt that offer visualization
Components of MoveIt that offer visualization
|
|
| 1 | 2024-11-29 | moveit_ros_trajectory_cache |
A trajectory cache for MoveIt 2 motion plans and cartesian plans.
A trajectory cache for MoveIt 2 motion plans and cartesian plans.
|
|
| 1 | 2024-11-29 | moveit_ros_tests |
Integration tests for moveit_ros
Integration tests for moveit_ros
|
|
| 3 | 2024-11-29 | moveit_ros_robot_interaction |
Components of MoveIt that offer interaction via interactive markers
Components of MoveIt that offer interaction via interactive markers
|
|
| 3 | 2024-11-29 | moveit_ros_planning_interface |
Components of MoveIt that offer simpler remote (as from another ROS 2 node) interfaces to planning and execution
Components of MoveIt that offer simpler remote (as from another ROS 2 node) interfaces to planning and execution
|
|
| 3 | 2024-11-29 | moveit_ros_planning |
Planning components of MoveIt that use ROS
Planning components of MoveIt that use ROS
|
|
| 3 | 2024-11-29 | moveit_ros_perception |
Components of MoveIt connecting to perception
Components of MoveIt connecting to perception
|
|
| 2 | 2024-11-29 | moveit_ros_occupancy_map_monitor |
Components of MoveIt connecting to occupancy map
Components of MoveIt connecting to occupancy map
|
|
| 3 | 2024-11-29 | moveit_ros_move_group |
The move_group node for MoveIt
The move_group node for MoveIt
|
|
| 2 | 2024-11-29 | moveit_ros_control_interface |
ros_control controller manager interface for MoveIt
ros_control controller manager interface for MoveIt
|
|
| 3 | 2024-11-29 | moveit_ros_benchmarks |
Enhanced tools for benchmarks in MoveIt
Enhanced tools for benchmarks in MoveIt
|
|
| 3 | 2024-11-29 | moveit_ros |
Components of MoveIt that use ROS
Components of MoveIt that use ROS
|
|
| 2 | 2024-11-29 | moveit_resources_prbt_support |
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
|
|
| 2 | 2024-11-29 | moveit_resources_prbt_pg70_support |
PRBT support for Schunk pg70 gripper.
PRBT support for Schunk pg70 gripper.
|
|
| 2 | 2024-11-29 | moveit_resources_prbt_moveit_config |
|
|
| 2 | 2024-11-29 | moveit_resources_prbt_ikfast_manipulator_plugin |
The prbt_ikfast_manipulator_plugin package
The prbt_ikfast_manipulator_plugin package
|
|
| 1 | 2024-11-29 | moveit_resources_pr2_description |
PR2 Resources used for MoveIt! testing
PR2 Resources used for MoveIt! testing
|
|
| 1 | 2024-11-29 | moveit_resources_panda_moveit_config |
|
|
| 1 | 2024-11-29 | moveit_resources_panda_description |
panda Resources used for MoveIt testing
panda Resources used for MoveIt testing
|
|
| 1 | 2024-11-29 | moveit_resources_fanuc_moveit_config |
|
|
| 1 | 2024-11-29 | moveit_resources_fanuc_description |
Fanuc Resources used for MoveIt testing
Fanuc Resources used for MoveIt testing
|
|
| 1 | 2024-11-29 | moveit_resources |
Resources used for MoveIt testing
Resources used for MoveIt testing
|
|
| 1 | 2024-11-29 | moveit_py |
Python binding for MoveIt 2
Python binding for MoveIt 2
|
|
| 3 | 2024-11-29 | moveit_plugins |
Metapackage for MoveIt plugins.
Metapackage for MoveIt plugins.
|
|
| 1 | 2024-11-29 | moveit_planners_stomp |
STOMP Motion Planner for MoveIt
STOMP Motion Planner for MoveIt
|
|
| 3 | 2024-11-29 | moveit_planners_ompl |
MoveIt interface to OMPL
MoveIt interface to OMPL
|
|
| 2 | 2024-11-29 | moveit_planners_chomp |
The interface for using CHOMP within MoveIt
The interface for using CHOMP within MoveIt
|
|
| 3 | 2024-11-29 | moveit_planners |
Meta package that installs all available planners for MoveIt
Meta package that installs all available planners for MoveIt
|
|
| 2 | 2024-11-29 | moveit_kinematics |
Package for all inverse kinematics solvers in MoveIt
Package for all inverse kinematics solvers in MoveIt
|
|
| 1 | 2024-11-29 | moveit_hybrid_planning |
Hybrid planning components of MoveIt 2
Hybrid planning components of MoveIt 2
|
|
| 3 | 2024-11-29 | moveit_core |
Core libraries used by MoveIt
Core libraries used by MoveIt
|
|
| 1 | 2024-11-29 | moveit_configs_utils |
Python library for loading moveit config parameters in launch files
Python library for loading moveit config parameters in launch files
|
|
| 1 | 2024-11-29 | moveit_common |
Common support functionality used throughout MoveIt
Common support functionality used throughout MoveIt
|
|
| 2 | 2024-11-29 | moveit |
Meta package that contains all essential packages of MoveIt 2
Meta package that contains all essential packages of MoveIt 2
|
|
| 3 | 2024-11-29 | grid_map_visualization |
Configurable tool to visualize grid maps in RViz.
Configurable tool to visualize grid maps in RViz.
|
|
| 3 | 2024-11-29 | grid_map_sdf |
Generates signed distance fields from grid maps.
Generates signed distance fields from grid maps.
|
|
| 3 | 2024-11-29 | grid_map_rviz_plugin |
RViz plugin for displaying grid map messages.
RViz plugin for displaying grid map messages.
|
|
| 3 | 2024-11-29 | grid_map_ros |
ROS interface for the grid map library to manage two-dimensional grid maps with multiple data layers.
ROS interface for the grid map library to manage two-dimensional grid maps with multiple data layers.
|
|
| 3 | 2024-11-29 | grid_map_pcl |
Conversions between grid maps and Point Cloud Library (PCL) types.
Conversions between grid maps and Point Cloud Library (PCL) types.
|
|
| 3 | 2024-11-29 | grid_map_octomap |
Conversions between grid maps and OctoMap types.
Conversions between grid maps and OctoMap types.
|
|
| 3 | 2024-11-29 | grid_map_msgs |
Definition of the multi-layered grid map message type.
Definition of the multi-layered grid map message type.
|
|
| 3 | 2024-11-29 | grid_map_loader |
Loading and publishing grid maps from bag files.
Loading and publishing grid maps from bag files.
|
|
| 3 | 2024-11-29 | grid_map_filters |
Processing grid maps as a sequence of ROS filters.
Processing grid maps as a sequence of ROS filters.
|
|
| 3 | 2024-11-29 | grid_map_demos |
Demo nodes to demonstrate the usage of the grid map library.
Demo nodes to demonstrate the usage of the grid map library.
|
|
| 3 | 2024-11-29 | grid_map_cv |
Conversions between grid maps and OpenCV images.
Conversions between grid maps and OpenCV images.
|
|
| 3 | 2024-11-29 | grid_map_costmap_2d |
Interface for grid maps to the costmap_2d format.
Interface for grid maps to the costmap_2d format.
|
|
| 3 | 2024-11-29 | grid_map_core |
Universal grid map library to manage two-dimensional grid maps with multiple data layers.
Universal grid map library to manage two-dimensional grid maps with multiple data layers.
|
|
| 1 | 2024-11-29 | grid_map_cmake_helpers |
CMake support functionality used throughout grid_map
CMake support functionality used throughout grid_map
|
|
| 3 | 2024-11-29 | grid_map |
Meta-package for the universal grid map library.
Meta-package for the universal grid map library.
|
|
| 1 | 2024-11-29 | geometric_shapes |
This package contains generic definitions of geometric shapes and bodies.
This package contains generic definitions of geometric shapes and bodies.
|
|
| 1 | 2024-11-29 | dual_arm_panda_moveit_config |
|
|
| 3 | 2024-11-29 | chomp_motion_planner |
chomp_motion_planner
chomp_motion_planner
|
|
| 1 | 2024-11-28 | system_fingerprint |
The system_fingerprint package
The system_fingerprint package
|
|
| 1 | 2024-11-28 | rosbridge_test_msgs |
Message and service definitions used in internal tests for rosbridge packages.
Message and service definitions used in internal tests for rosbridge packages.
|
|
| 1 | 2024-11-28 | rosbridge_suite |
Rosbridge provides a JSON API to ROS functionality for non-ROS programs.
There are a variety of front ends that interface with rosbridge, including
a WebSocket server for web browsers to interact with.
Rosbridge_suite is a meta-package containing rosbridge, various front end
packages for rosbridge like a WebSocket package, and helper packages.
Rosbridge provides a JSON API to ROS functionality for non-ROS programs.
There are a variety of front ends that interface with rosbridge, including
a WebSocket server for web browsers to interact with.
Rosbridge_suite is a meta-package containing rosbridge, various front end
packages for rosbridge like a WebSocket package, and helper packages.
|
|
| 1 | 2024-11-28 | rosbridge_server |
A WebSocket interface to rosbridge.
A WebSocket interface to rosbridge.
|
|
| 1 | 2024-11-28 | rosbridge_msgs |
Package containing message files
Package containing message files
|
|
| 1 | 2024-11-28 | rosbridge_library |
The core rosbridge package, responsible for interpreting JSON andperforming
the appropriate ROS action, like subscribe, publish, call service, and
interact with params.
The core rosbridge package, responsible for interpreting JSON andperforming
the appropriate ROS action, like subscribe, publish, call service, and
interact with params.
|
|
| 1 | 2024-11-28 | rosapi_msgs |
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
|
|
| 1 | 2024-11-28 | rosapi |
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
|
|
| 1 | 2024-11-28 | ompl |
OMPL is a free sampling-based motion planning library.
OMPL is a free sampling-based motion planning library.
|
|
| 1 | 2024-11-27 | rmf_demos_tasks |
A package containing scripts for demos
A package containing scripts for demos
|
|
| 1 | 2024-11-27 | rmf_demos_maps |
A package containing demo maps for rmf
A package containing demo maps for rmf
|
|
| 1 | 2024-11-27 | rmf_demos_gz |
Launch files for RMF demos using the Gazebo simulator
Launch files for RMF demos using the Gazebo simulator
|
|
| 1 | 2024-11-27 | rmf_demos_fleet_adapter |
Fleet adapters for interfacing with RMF Demos robots with a fleet manager via REST API
Fleet adapters for interfacing with RMF Demos robots with a fleet manager via REST API
|
|
| 1 | 2024-11-27 | rmf_demos_bridges |
Nodes for bridging between different communication stacks
Nodes for bridging between different communication stacks
|
|
| 1 | 2024-11-27 | rmf_demos_assets |
Models and other media used for RMF demos
Models and other media used for RMF demos
|
|
| 1 | 2024-11-27 | rmf_demos |
Common launch files for RMF demos
Common launch files for RMF demos
|
|
| 1 | 2024-11-27 | mola_yaml |
YAML helper library common to MOLA modules
YAML helper library common to MOLA modules
|
|
| 1 | 2024-11-27 | mola_viz |
GUI for MOLA
GUI for MOLA
|
|
| 1 | 2024-11-27 | mola_traj_tools |
CLI tools to manipulate trajectory files as a complement to the evo package
CLI tools to manipulate trajectory files as a complement to the evo package
|
|
| 1 | 2024-11-27 | mola_relocalization |
C++ library with algorithms for relocalization, global localization, or pose estimation given a large initial uncertainty
C++ library with algorithms for relocalization, global localization, or pose estimation given a large initial uncertainty
|
|
| 1 | 2024-11-27 | mola_pose_list |
C++ library for searchable pose lists
C++ library for searchable pose lists
|
|
| 1 | 2024-11-27 | mola_navstate_fuse |
SE(3) pose and twist path data fusion estimator
SE(3) pose and twist path data fusion estimator
|
|
| 1 | 2024-11-27 | mola_navstate_fg |
SE(3) pose and twist path data fusion estimator
SE(3) pose and twist path data fusion estimator
|
|
| 1 | 2024-11-27 | mola_msgs |
ROS message, services, and actions used in other MOLA packages.
ROS message, services, and actions used in other MOLA packages.
|
|
| 1 | 2024-11-27 | mola_metric_maps |
Advanced metric map classes, using the generic `mrpt::maps::CMetricMap` interface, for use in other MOLA odometry and SLAM modules.
Advanced metric map classes, using the generic `mrpt::maps::CMetricMap` interface, for use in other MOLA odometry and SLAM modules.
|
|
| 1 | 2024-11-27 | mola_launcher |
Launcher app for MOLA systems
Launcher app for MOLA systems
|
|
| 1 | 2024-11-27 | mola_kernel |
Fundamental C++ virtual interfaces and data types for the rest of MOLA modules
Fundamental C++ virtual interfaces and data types for the rest of MOLA modules
|
|
| 1 | 2024-11-27 | mola_input_rosbag2 |
Offline RawDataSource from rosbag2 datasets
Offline RawDataSource from rosbag2 datasets
|
|
| 1 | 2024-11-27 | mola_input_rawlog |
Offline RawDataSource from MRPT rawlog datasets
Offline RawDataSource from MRPT rawlog datasets
|
|
| 1 | 2024-11-27 | mola_input_paris_luco_dataset |
Offline RawDataSource from Paris LUCO (CT-ICP) odometry/SLAM datasets
Offline RawDataSource from Paris LUCO (CT-ICP) odometry/SLAM datasets
|
|
| 1 | 2024-11-27 | mola_input_mulran_dataset |
Offline RawDataSource from MulRan datasets
Offline RawDataSource from MulRan datasets
|
|
| 1 | 2024-11-27 | mola_input_kitti_dataset |
Offline RawDataSource from Kitti odometry/SLAM datasets
Offline RawDataSource from Kitti odometry/SLAM datasets
|
|
| 1 | 2024-11-27 | mola_input_kitti360_dataset |
Offline RawDataSource from Kitti-360 datasets
Offline RawDataSource from Kitti-360 datasets
|
|
| 1 | 2024-11-27 | mola_input_euroc_dataset |
Offline RawDataSource from EUROC SLAM datasets
Offline RawDataSource from EUROC SLAM datasets
|
|
| 1 | 2024-11-27 | mola_imu_preintegration |
Integrator of IMU angular velocity readings
Integrator of IMU angular velocity readings
|
|
| 1 | 2024-11-27 | mola_demos |
Demo and example launch files for MOLA
Demo and example launch files for MOLA
|
|
| 1 | 2024-11-27 | mola_bridge_ros2 |
Bidirectional bridge ROS2-MOLA
Bidirectional bridge ROS2-MOLA
|
|
| 1 | 2024-11-27 | mola |
Metapackage with all core open-sourced MOLA packages.
Metapackage with all core open-sourced MOLA packages.
|
|
| 1 | 2024-11-27 | kitti_metrics_eval |
CLI tool to evaluate the KITTI odometry bechmark metrics to trajectory files
CLI tool to evaluate the KITTI odometry bechmark metrics to trajectory files
|
|
| 1 | 2024-11-26 | rviz_visual_testing_framework |
3D testing framework for RViz.
3D testing framework for RViz.
|
|
| 1 | 2024-11-26 | rviz_rendering_tests |
Example plugin for RViz - documents and tests RViz plugin development
Example plugin for RViz - documents and tests RViz plugin development
|
|
| 1 | 2024-11-26 | rviz_rendering |
Library which provides the 3D rendering functionality in rviz.
Library which provides the 3D rendering functionality in rviz.
|
|
| 1 | 2024-11-26 | rviz_ogre_vendor |
Wrapper around ogre3d, it provides a fixed CMake module and an ExternalProject build of ogre.
Wrapper around ogre3d, it provides a fixed CMake module and an ExternalProject build of ogre.
|
|
| 1 | 2024-11-26 | rviz_default_plugins |
Several default plugins for rviz to cover the basic functionality.
Several default plugins for rviz to cover the basic functionality.
|
|
| 1 | 2024-11-26 | rviz_common |
Common rviz API, used by rviz plugins and applications.
Common rviz API, used by rviz plugins and applications.
|
|
| 1 | 2024-11-26 | rviz_assimp_vendor |
Wrapper around assimp, providing nothing but a dependency on assimp, on some systems.
On others, it provides a fixed CMake module or even an ExternalProject build of assimp.
Wrapper around assimp, providing nothing but a dependency on assimp, on some systems.
On others, it provides a fixed CMake module or even an ExternalProject build of assimp.
|
|
| 1 | 2024-11-26 | rviz2 |
3D visualization tool for ROS.
3D visualization tool for ROS.
|
|
| 1 | 2024-11-26 | foxglove_msgs |
foxglove_msgs provides visualization messages that are supported by Foxglove.
foxglove_msgs provides visualization messages that are supported by Foxglove.
|
|
| 1 | 2024-11-26 | foxglove_bridge |
ROS Foxglove Bridge
ROS Foxglove Bridge
|
|
| 3 | 2024-11-26 | apriltag |
AprilTag detector library
AprilTag detector library
|
|
| 1 | 2024-11-25 | ur_client_library |
Standalone C++ library for accessing Universal Robots interfaces. This has been forked off the ur_robot_driver.
Standalone C++ library for accessing Universal Robots interfaces. This has been forked off the ur_robot_driver.
|
|
| 1 | 2024-11-25 | log_view |
The log_view package provides a ncurses based terminal GUI for
viewing and filtering published ROS log messages.
This is an alternative to rqt_console and swri_console that doesn't depend
on qt and can be run directly in a terminal.
The log_view package provides a ncurses based terminal GUI for
viewing and filtering published ROS log messages.
This is an alternative to rqt_console and swri_console that doesn't depend
on qt and can be run directly in a terminal.
|
|
| 1 | 2024-11-25 | behaviortree_cpp |
This package provides the Behavior Trees core library.
This package provides the Behavior Trees core library.
|
|
| 1 | 2024-11-24 | plotjuggler |
PlotJuggler: juggle with data
PlotJuggler: juggle with data
|
|
| 1 | 2024-11-24 | hatchbed_common |
Common Hatchbed C++ utility code for ROS, such registering and handling updates to ros parameters.
Common Hatchbed C++ utility code for ROS, such registering and handling updates to ros parameters.
|
|
| 1 | 2024-11-23 | mp2p_icp |
A repertory of multi primitive-to-primitive (MP2P) ICP algorithms in C++
A repertory of multi primitive-to-primitive (MP2P) ICP algorithms in C++
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | velocity_controllers |
Generic controller for forwarding commands.
Generic controller for forwarding commands.
|
|
| 3 | 2024-12-04 | ur_description |
URDF description for Universal Robots
URDF description for Universal Robots
|
|
| 1 | 2024-12-04 | tricycle_steering_controller |
Steering controller with tricycle kinematics. Rear fixed wheels are powering the vehicle and front wheel is steering.
Steering controller with tricycle kinematics. Rear fixed wheels are powering the vehicle and front wheel is steering.
|
|
| 1 | 2024-12-04 | tricycle_controller |
Controller for a tricycle drive mobile base
Controller for a tricycle drive mobile base
|
|
| 2 | 2024-12-04 | transmission_interface |
transmission_interface contains data structures for representing mechanical transmissions, methods for propagating values between actuator and joint spaces and tooling to support this.
transmission_interface contains data structures for representing mechanical transmissions, methods for propagating values between actuator and joint spaces and tooling to support this.
|
|
| 1 | 2024-12-04 | steering_controllers_library |
Package for steering robot configurations including odometry and interfaces.
Package for steering robot configurations including odometry and interfaces.
|
|
| 2 | 2024-12-04 | rqt_joint_trajectory_controller |
Graphical frontend for interacting with joint_trajectory_controller instances.
Graphical frontend for interacting with joint_trajectory_controller instances.
|
|
| 2 | 2024-12-04 | rqt_controller_manager |
Graphical frontend for interacting with the controller manager.
Graphical frontend for interacting with the controller manager.
|
|
| 1 | 2024-12-04 | ros2controlcli |
The ROS 2 command line tools for ROS2 Control.
The ROS 2 command line tools for ROS2 Control.
|
|
| 1 | 2024-12-04 | ros2_controllers_test_nodes |
Demo nodes for showing and testing functionalities of the ros2_control framework.
Demo nodes for showing and testing functionalities of the ros2_control framework.
|
|
| 1 | 2024-12-04 | ros2_controllers |
Metapackage for ros2_controllers related packages
Metapackage for ros2_controllers related packages
|
|
| 1 | 2024-12-04 | ros2_control_test_assets |
The package provides shared test resources for ros2_control stack
The package provides shared test resources for ros2_control stack
|
|
| 1 | 2024-12-04 | ros2_control |
Metapackage for ROS2 control related packages
Metapackage for ROS2 control related packages
|
|
| 1 | 2024-12-04 | rclcpp_lifecycle |
Package containing a prototype for lifecycle implementation
Package containing a prototype for lifecycle implementation
|
|
| 1 | 2024-12-04 | rclcpp_components |
Package containing tools for dynamically loadable components
Package containing tools for dynamically loadable components
|
|
| 1 | 2024-12-04 | rclcpp_action |
Adds action APIs for C++.
Adds action APIs for C++.
|
|
| 1 | 2024-12-04 | rclcpp |
The ROS client library in C++.
The ROS client library in C++.
|
|
| 2 | 2024-12-04 | rc_reason_msgs |
Msg and srv definitions for rc_reason_clients
Msg and srv definitions for rc_reason_clients
|
|
| 2 | 2024-12-04 | rc_reason_clients |
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
|
|
| 1 | 2024-12-04 | range_sensor_broadcaster |
Controller to publish readings of range sensors.
Controller to publish readings of range sensors.
|
|
| 1 | 2024-12-04 | py_trees |
Pythonic implementation of behaviour trees.
Pythonic implementation of behaviour trees.
|
|
| 2 | 2024-12-04 | position_controllers |
Generic controller for forwarding commands.
Generic controller for forwarding commands.
|
|
| 1 | 2024-12-04 | pose_broadcaster |
Broadcaster to publish cartesian states.
Broadcaster to publish cartesian states.
|
|
| 1 | 2024-12-04 | pid_controller |
Controller based on PID implememenation from control_toolbox package.
Controller based on PID implememenation from control_toolbox package.
|
|
| 1 | 2024-12-04 | parallel_gripper_controller |
The parallel_gripper_controller package
The parallel_gripper_controller package
|
|
| 2 | 2024-12-04 | mvsim |
A lightweight multivehicle simulation framework.
A lightweight multivehicle simulation framework.
|
|
| 1 | 2024-12-04 | mola_lidar_odometry |
LIDAR odometry system based on MOLA and MRPT components
LIDAR odometry system based on MOLA and MRPT components
|
|
| 1 | 2024-12-04 | mecanum_drive_controller |
Implementation of mecanum drive controller for 4 wheel drive.
Implementation of mecanum drive controller for 4 wheel drive.
|
|
| 3 | 2024-12-04 | joint_trajectory_controller |
Controller for executing joint-space trajectories on a group of joints
Controller for executing joint-space trajectories on a group of joints
|
|
| 1 | 2024-12-04 | joint_state_broadcaster |
Broadcaster to publish joint state
Broadcaster to publish joint state
|
|
| 1 | 2024-12-04 | joint_limits |
Package with interfaces for handling of joint limits in controllers or in hardware. The package also implements Saturation Joint Limiter for position-velocity-acceleration set and other individual interfaces.
Package with interfaces for handling of joint limits in controllers or in hardware. The package also implements Saturation Joint Limiter for position-velocity-acceleration set and other individual interfaces.
|
|
| 1 | 2024-12-04 | imu_sensor_broadcaster |
Controller to publish readings of IMU sensors.
Controller to publish readings of IMU sensors.
|
|
| 1 | 2024-12-04 | hardware_interface_testing |
ros2_control hardware interface testing
ros2_control hardware interface testing
|
|
| 2 | 2024-12-04 | hardware_interface |
ros2_control hardware interface
ros2_control hardware interface
|
|
| 1 | 2024-12-04 | gripper_controllers |
The gripper_controllers package
The gripper_controllers package
|
|
| 1 | 2024-12-04 | gpio_controllers |
Controllers to interact with gpios.
Controllers to interact with gpios.
|
|
| 2 | 2024-12-04 | forward_command_controller |
Generic controller for forwarding commands.
Generic controller for forwarding commands.
|
|
| 1 | 2024-12-04 | force_torque_sensor_broadcaster |
Controller to publish state of force-torque sensors.
Controller to publish state of force-torque sensors.
|
|
| 1 | 2024-12-04 | fastrtps |
*eprosima Fast DDS* (formerly Fast RTPS) is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group). eProsima Fast DDS implements the RTPS (Real Time Publish Subscribe) protocol, which provides publisher-subscriber communications over unreliable transports such as UDP, as defined and maintained by the Object Management Group (OMG) consortium. RTPS is also the wire interoperability protocol defined for the Data Distribution Service (DDS) standard. *eProsima Fast DDS* expose an API to access directly the RTPS protocol, giving the user full access to the protocol internals.
*eprosima Fast DDS* (formerly Fast RTPS) is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group). eProsima Fast DDS implements the RTPS (Real Time Publish Subscribe) protocol, which provides publisher-subscriber communications over unreliable transports such as UDP, as defined and maintained by the Object Management Group (OMG) consortium. RTPS is also the wire interoperability protocol defined for the Data Distribution Service (DDS) standard. *eProsima Fast DDS* expose an API to access directly the RTPS protocol, giving the user full access to the protocol internals.
|
|
| 2 | 2024-12-04 | effort_controllers |
Generic controller for forwarding commands.
Generic controller for forwarding commands.
|
|
| 1 | 2024-12-04 | ecal |
eCAL - enhanced Communication Abstraction Layer. A fast publish-subscribe cross-plattform middleware using Shared Memory and UDP.
eCAL - enhanced Communication Abstraction Layer. A fast publish-subscribe cross-plattform middleware using Shared Memory and UDP.
|
|
| 2 | 2024-12-04 | diff_drive_controller |
Controller for a differential-drive mobile base.
Controller for a differential-drive mobile base.
|
|
| 2 | 2024-12-04 | controller_manager_msgs |
Messages and services for the controller manager.
Messages and services for the controller manager.
|
|
| 2 | 2024-12-04 | controller_manager |
Description of controller_manager
Description of controller_manager
|
|
| 2 | 2024-12-04 | controller_interface |
Description of controller_interface
Description of controller_interface
|
|
| 1 | 2024-12-04 | coal |
An extension of the Flexible Collision Library.
An extension of the Flexible Collision Library.
|
|
| 1 | 2024-12-04 | bicycle_steering_controller |
Steering controller with bicycle kinematics. Rear fixed wheel is powering the vehicle and front wheel is steering.
Steering controller with bicycle kinematics. Rear fixed wheel is powering the vehicle and front wheel is steering.
|
|
| 1 | 2024-12-04 | admittance_controller |
Implementation of admittance controllers for different input and output interface.
Implementation of admittance controllers for different input and output interface.
|
|
| 2 | 2024-12-04 | ackermann_steering_controller |
Steering controller for Ackermann kinematics. Rear fixed wheels are powering the vehicle and front wheels are steering it.
Steering controller for Ackermann kinematics. Rear fixed wheels are powering the vehicle and front wheels are steering it.
|
|
| 1 | 2024-12-03 | zstd_vendor |
Zstd compression vendor package, providing a dependency for Zstd.
Zstd compression vendor package, providing a dependency for Zstd.
|
|
| 2 | 2024-12-03 | ur_robot_driver |
The new driver for Universal Robots UR3, UR5 and UR10 robots with CB3 controllers and the e-series.
The new driver for Universal Robots UR3, UR5 and UR10 robots with CB3 controllers and the e-series.
|
|
| 1 | 2024-12-03 | ur_moveit_config |
An example package with MoveIt2 configurations for UR robots.
An example package with MoveIt2 configurations for UR robots.
|
|
| 2 | 2024-12-03 | ur_dashboard_msgs |
Messages around the UR Dashboard server.
Messages around the UR Dashboard server.
|
|
| 1 | 2024-12-03 | ur_controllers |
Provides controllers that use the speed scaling interface of Universal Robots.
Provides controllers that use the speed scaling interface of Universal Robots.
|
|
| 2 | 2024-12-03 | ur_calibration |
Package for extracting the factory calibration from a UR robot and change it such that it can be used by ur_description to gain a correct URDF
Package for extracting the factory calibration from a UR robot and change it such that it can be used by ur_description to gain a correct URDF
|
|
| 1 | 2024-12-03 | ur |
Metapackage for universal robots
Metapackage for universal robots
|
|
| 1 | 2024-12-03 | test_bond |
Contains tests for [[bond]], including tests for [[bondcpp]].
Contains tests for [[bond]], including tests for [[bondcpp]].
|
|
| 1 | 2024-12-03 | sqlite3_vendor |
SQLite 3 vendor package
SQLite 3 vendor package
|
|
| 1 | 2024-12-03 | smclib |
The State Machine Compiler (SMC) from http://smc.sourceforge.net/
converts a language-independent description of a state machine
into the source code to support that state machine.
This package contains the libraries that a compiled state machine
depends on, but it does not contain the compiler itself.
The State Machine Compiler (SMC) from http://smc.sourceforge.net/
converts a language-independent description of a state machine
into the source code to support that state machine.
This package contains the libraries that a compiled state machine
depends on, but it does not contain the compiler itself.
|
|
| 1 | 2024-12-03 | shared_queues_vendor |
Vendor package for concurrent queues from moodycamel
Vendor package for concurrent queues from moodycamel
|
|
| 1 | 2024-12-03 | self_test |
self_test
self_test
|
|
| 1 | 2024-12-03 | rosbag2_transport |
Layer encapsulating ROS middleware to allow rosbag2 to be used with or without middleware
Layer encapsulating ROS middleware to allow rosbag2 to be used with or without middleware
|
|
| 1 | 2024-12-03 | rosbag2_tests |
Tests package for rosbag2
Tests package for rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_test_msgdefs |
message definition test fixtures for rosbag2 schema recording
message definition test fixtures for rosbag2 schema recording
|
|
| 1 | 2024-12-03 | rosbag2_test_common |
Commonly used test helper classes and fixtures for rosbag2
Commonly used test helper classes and fixtures for rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_storage_sqlite3 |
ROSBag2 SQLite3 storage plugin
ROSBag2 SQLite3 storage plugin
|
|
| 2 | 2024-12-03 | rosbag2_storage_mcap |
rosbag2 storage plugin using the MCAP file format
rosbag2 storage plugin using the MCAP file format
|
|
| 1 | 2024-12-03 | rosbag2_storage_default_plugins |
Intermediate metapackage to point at default storage plugin(s) for rosbag2
Intermediate metapackage to point at default storage plugin(s) for rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_storage |
ROS2 independent storage format to store serialized ROS2 messages
ROS2 independent storage format to store serialized ROS2 messages
|
|
| 1 | 2024-12-03 | rosbag2_py |
Python API for rosbag2
Python API for rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_performance_benchmarking_msgs |
A package containing rosbag2 performance benchmarking specific messages.
A package containing rosbag2 performance benchmarking specific messages.
|
|
| 1 | 2024-12-03 | rosbag2_performance_benchmarking |
Code to benchmark rosbag2
Code to benchmark rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_interfaces |
Interface definitions for controlling rosbag2
Interface definitions for controlling rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_examples_py |
Python bag writing tutorial
Python bag writing tutorial
|
|
| 1 | 2024-12-03 | rosbag2_examples_cpp |
rosbag2 C++ API tutorials and examples
rosbag2 C++ API tutorials and examples
|
|
| 1 | 2024-12-03 | rosbag2_cpp |
C++ ROSBag2 client library
C++ ROSBag2 client library
|
|
| 1 | 2024-12-03 | rosbag2_compression_zstd |
Zstandard compression library implementation of rosbag2_compression
Zstandard compression library implementation of rosbag2_compression
|
|
| 1 | 2024-12-03 | rosbag2_compression |
Compression implementations for rosbag2 bags and messages.
Compression implementations for rosbag2 bags and messages.
|
|
| 1 | 2024-12-03 | rosbag2 |
Meta package for rosbag2 related packages
Meta package for rosbag2 related packages
|
|
| 1 | 2024-12-03 | ros_industrial_cmake_boilerplate |
Contains boilerplate cmake script, macros and utils
Contains boilerplate cmake script, macros and utils
|
|
| 2 | 2024-12-03 | ros_babel_fish_test_msgs |
Test messages for the ros_babel_fish project tests.
Test messages for the ros_babel_fish project tests.
|
|
| 2 | 2024-12-03 | ros_babel_fish |
A runtime message handler for ROS.
Allows subscription, publishing, calling of services and actions with messages known only at runtime as long
as they are available in the local environment.
A runtime message handler for ROS.
Allows subscription, publishing, calling of services and actions with messages known only at runtime as long
as they are available in the local environment.
|
|
| 1 | 2024-12-03 | ros2bag |
Entry point for rosbag in ROS 2
Entry point for rosbag in ROS 2
|
|
| 1 | 2024-12-03 | robot_calibration_msgs |
Messages for calibrating a robot
Messages for calibrating a robot
|
|
| 1 | 2024-12-03 | robot_calibration |
Calibrate a Robot
Calibrate a Robot
|
|
| 1 | 2024-12-03 | realtime_tools |
Contains a set of tools that can be used from a hard
realtime thread, without breaking the realtime behavior.
Contains a set of tools that can be used from a hard
realtime thread, without breaking the realtime behavior.
|
|
| 1 | 2024-12-03 | python_mrpt |
Python wrapper for Mobile Robot Programming Toolkit (MRPT) libraries
Python wrapper for Mobile Robot Programming Toolkit (MRPT) libraries
|
|
| 2 | 2024-12-03 | plansys2_tools |
A set of tools for monitoring ROS2 Planning System
A set of tools for monitoring ROS2 Planning System
|
|
| 2 | 2024-12-03 | plansys2_tests |
This package contains the tests package for the ROS2 Planning System
This package contains the tests package for the ROS2 Planning System
|
|
| 2 | 2024-12-03 | plansys2_terminal |
A terminal tool for monitor and manage the ROS2 Planning System
A terminal tool for monitor and manage the ROS2 Planning System
|
|
| 1 | 2024-12-03 | plansys2_support_py |
This package contains modules for developing PlanSys components in Python
This package contains modules for developing PlanSys components in Python
|
|
| 2 | 2024-12-03 | plansys2_problem_expert |
This package contains the Problem Expert module for the ROS2 Planning System
This package contains the Problem Expert module for the ROS2 Planning System
|
|
| 2 | 2024-12-03 | plansys2_popf_plan_solver |
This package contains the PDDL-based Planner module for the ROS2 Planning System
This package contains the PDDL-based Planner module for the ROS2 Planning System
|
|
| 2 | 2024-12-03 | plansys2_planner |
This package contains the PDDL-based Planner module for the ROS2 Planning System
This package contains the PDDL-based Planner module for the ROS2 Planning System
|
|
| 2 | 2024-12-03 | plansys2_pddl_parser |
This package contains a library for parsing PDDL domains and problems.
This package derives from the work of Anders Jonsson, contained in https://github.com/wisdompoet/universal-pddl-parser.git
with many modifications by Francisco Martin:
* ROS2 packaging
* Source code structure refactor
* CMakeLists.txt for cmake compilation
* Reading from String instead of files
* Licensing
This package contains a library for parsing PDDL domains and problems.
This package derives from the work of Anders Jonsson, contained in https://github.com/wisdompoet/universal-pddl-parser.git
with many modifications by Francisco Martin:
* ROS2 packaging
* Source code structure refactor
* CMakeLists.txt for cmake compilation
* Reading from String instead of files
* Licensing
|
|
| 2 | 2024-12-03 | plansys2_msgs |
Messages and service files for the ROS2 Planning System
Messages and service files for the ROS2 Planning System
|
|
| 2 | 2024-12-03 | plansys2_lifecycle_manager |
A controller/manager for the lifecycle nodes of the ROS2 Planning System
A controller/manager for the lifecycle nodes of the ROS2 Planning System
|
|
| 2 | 2024-12-03 | plansys2_executor |
This package contains the Executor module for the ROS2 Planning System
This package contains the Executor module for the ROS2 Planning System
|
|
| 2 | 2024-12-03 | plansys2_domain_expert |
This package contains the Domain Expert module for the ROS2 Planning System
This package contains the Domain Expert module for the ROS2 Planning System
|
|
| 2 | 2024-12-03 | plansys2_core |
This package contains the PDDL-based core for the ROS2 Planning System
This package contains the PDDL-based core for the ROS2 Planning System
|
|
| 2 | 2024-12-03 | plansys2_bt_actions |
This package contains the Problem Expert module for the ROS2 Planning System
This package contains the Problem Expert module for the ROS2 Planning System
|
|
| 2 | 2024-12-03 | plansys2_bringup |
Bringup scripts and configurations for the ROS2 Planning System
Bringup scripts and configurations for the ROS2 Planning System
|
|
| 1 | 2024-12-03 | pinocchio |
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
|
|
| 1 | 2024-12-03 | osrf_pycommon |
Commonly needed Python modules, used by Python software developed at OSRF.
Commonly needed Python modules, used by Python software developed at OSRF.
|
|
| 1 | 2024-12-03 | nav2_minimal_tb4_sim |
Nav2 Minimum TurtleBot4 Simulation
Nav2 Minimum TurtleBot4 Simulation
|
|
| 1 | 2024-12-03 | nav2_minimal_tb4_description |
Nav2's minimum Turtlebot4 Description package
Nav2's minimum Turtlebot4 Description package
|
|
| 1 | 2024-12-03 | nav2_minimal_tb3_sim |
Nav2 Minimum TurtleBot3 Simulation
Nav2 Minimum TurtleBot3 Simulation
|
|
| 1 | 2024-12-03 | mrpt_libtclap |
Mobile Robot Programming Toolkit (MRPT) libraries (tclap C++ library).
This package contains: mrpt-tclap
Mobile Robot Programming Toolkit (MRPT) libraries (tclap C++ library).
This package contains: mrpt-tclap
|
|
| 1 | 2024-12-03 | mrpt_libslam |
Mobile Robot Programming Toolkit (MRPT) libraries (slam/vision C++ libraries).
This package contains: mrpt-slam, mrpt-vision
Mobile Robot Programming Toolkit (MRPT) libraries (slam/vision C++ libraries).
This package contains: mrpt-slam, mrpt-vision
|
|
| 1 | 2024-12-03 | mrpt_libros_bridge |
Mobile Robot Programming Toolkit (MRPT) libraries (ros2bridge C++ library).
This package contains: mrpt-ros2bridge
Mobile Robot Programming Toolkit (MRPT) libraries (ros2bridge C++ library).
This package contains: mrpt-ros2bridge
|
|
| 1 | 2024-12-03 | mrpt_libposes |
Mobile Robot Programming Toolkit (MRPT) libraries (poses C++ libraries).
This package contains: mrpt-poses, mrpt-tfest, mrpt-bayes
Mobile Robot Programming Toolkit (MRPT) libraries (poses C++ libraries).
This package contains: mrpt-poses, mrpt-tfest, mrpt-bayes
|
|
| 1 | 2024-12-03 | mrpt_libopengl |
Mobile Robot Programming Toolkit (MRPT) libraries (opengl/img C++ libraries).
This package contains: mrpt-opengl, mrpt-img
Mobile Robot Programming Toolkit (MRPT) libraries (opengl/img C++ libraries).
This package contains: mrpt-opengl, mrpt-img
|
|
| 1 | 2024-12-03 | mrpt_libobs |
Mobile Robot Programming Toolkit (MRPT) libraries (obs C++ libraries).
This package contains: mrpt-obs, mrpt-topography
Mobile Robot Programming Toolkit (MRPT) libraries (obs C++ libraries).
This package contains: mrpt-obs, mrpt-topography
|
|
| 1 | 2024-12-03 | mrpt_libnav |
Mobile Robot Programming Toolkit (MRPT) libraries (nav C++ libraries).
This package contains: mrpt-nav, mrpt-kinematics
Mobile Robot Programming Toolkit (MRPT) libraries (nav C++ libraries).
This package contains: mrpt-nav, mrpt-kinematics
|
|
| 1 | 2024-12-03 | mrpt_libmath |
Mobile Robot Programming Toolkit (MRPT) libraries (math C++ libraries).
This package contains: mrpt-math
Mobile Robot Programming Toolkit (MRPT) libraries (math C++ libraries).
This package contains: mrpt-math
|
|
| 1 | 2024-12-03 | mrpt_libmaps |
Mobile Robot Programming Toolkit (MRPT) libraries (maps C++ libraries).
This package contains: mrpt-maps, mrpt-graphs
Mobile Robot Programming Toolkit (MRPT) libraries (maps C++ libraries).
This package contains: mrpt-maps, mrpt-graphs
|
|
| 1 | 2024-12-03 | mrpt_libhwdrivers |
Mobile Robot Programming Toolkit (MRPT) libraries (hwdrivers C++ libraries).
This package contains: mrpt-hwdrivers, mrpt-comms
Mobile Robot Programming Toolkit (MRPT) libraries (hwdrivers C++ libraries).
This package contains: mrpt-hwdrivers, mrpt-comms
|
|
| 1 | 2024-12-03 | mrpt_libgui |
Mobile Robot Programming Toolkit (MRPT) libraries (GUI C++ libraries).
This package contains: mrpt-gui, nanogui
Mobile Robot Programming Toolkit (MRPT) libraries (GUI C++ libraries).
This package contains: mrpt-gui, nanogui
|
|
| 1 | 2024-12-03 | mrpt_libbase |
Mobile Robot Programming Toolkit (MRPT) libraries (core C++ libraries).
This package contains: mrpt-io, mrpt-serialization, mrpt-random, mrpt-system, mrpt-rtti, mrpt-containers, mrpt-typemeta, mrpt-core, mrpt-random, mrpt-config, mrpt-expr
Mobile Robot Programming Toolkit (MRPT) libraries (core C++ libraries).
This package contains: mrpt-io, mrpt-serialization, mrpt-random, mrpt-system, mrpt-rtti, mrpt-containers, mrpt-typemeta, mrpt-core, mrpt-random, mrpt-config, mrpt-expr
|
|
| 1 | 2024-12-03 | mrpt_libapps |
Mobile Robot Programming Toolkit (MRPT) libraries (apps C++ libraries).
This package contains: mrpt-apps lib, mrpt-graphslam
Mobile Robot Programming Toolkit (MRPT) libraries (apps C++ libraries).
This package contains: mrpt-apps lib, mrpt-graphslam
|
|
| 1 | 2024-12-03 | mrpt_apps |
Mobile Robot Programming Toolkit (MRPT) applications
Mobile Robot Programming Toolkit (MRPT) applications
|
|
| 2 | 2024-12-03 | mcap_vendor |
mcap vendor package
mcap vendor package
|
|
| 1 | 2024-12-03 | liblz4_vendor |
LZ4 compression vendor package, providing a dependency for LZ4.
LZ4 compression vendor package, providing a dependency for LZ4.
|
|
| 1 | 2024-12-03 | etsi_its_vam_ts_msgs |
ROS messages for ETSI ITS VAM (TS)
ROS messages for ETSI ITS VAM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_vam_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS VAMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS VAMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_vam_ts_coding |
C++ compatible C source code for ETSI ITS VAMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS VAMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_spatem_ts_msgs |
ROS messages for ETSI ITS SPATEM (TS)
ROS messages for ETSI ITS SPATEM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_spatem_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS SPATEMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS SPATEMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_spatem_ts_coding |
C++ compatible C source code for ETSI ITS SPATEMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS SPATEMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_rviz_plugins |
RViz plugin for ROS 2 messages based on ETSI ITS messages
RViz plugin for ROS 2 messages based on ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_primitives_conversion |
Conversion functions for converting ROS primitives to and from ASN.1-encoded primitives
Conversion functions for converting ROS primitives to and from ASN.1-encoded primitives
|
|
| 1 | 2024-12-03 | etsi_its_msgs_utils |
ROS messages and utility functions for ETSI ITS messages
ROS messages and utility functions for ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_msgs |
ROS messages for ETSI ITS messages
ROS messages for ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_messages |
ROS support for ETSI ITS messages
ROS support for ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_mapem_ts_msgs |
ROS messages for ETSI ITS MAPEM (TS)
ROS messages for ETSI ITS MAPEM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_mapem_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS MAPEMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS MAPEMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_mapem_ts_coding |
C++ compatible C source code for ETSI ITS MAPEMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS MAPEMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_denm_msgs |
ROS messages for ETSI ITS DENM
ROS messages for ETSI ITS DENM
|
|
| 1 | 2024-12-03 | etsi_its_denm_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS DENMs
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS DENMs
|
|
| 1 | 2024-12-03 | etsi_its_denm_coding |
C++ compatible C source code for ETSI ITS DENMs generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS DENMs generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_cpm_ts_msgs |
ROS messages for ETSI ITS CPM (TS)
ROS messages for ETSI ITS CPM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cpm_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CPMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CPMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cpm_ts_coding |
C++ compatible C source code for ETSI ITS CPMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS CPMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_conversion |
Converts ROS messages to and from ASN.1-encoded ETSI ITS messages
Converts ROS messages to and from ASN.1-encoded ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_coding |
C++ compatible C source code for ETSI ITS messages generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS messages generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_cam_ts_msgs |
ROS messages for ETSI ITS CAM (TS)
ROS messages for ETSI ITS CAM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cam_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cam_ts_coding |
C++ compatible C source code for ETSI ITS CAMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS CAMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_cam_msgs |
ROS messages for ETSI ITS CAM
ROS messages for ETSI ITS CAM
|
|
| 1 | 2024-12-03 | etsi_its_cam_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs
|
|
| 1 | 2024-12-03 | etsi_its_cam_coding |
C++ compatible C source code for ETSI ITS CAMs generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS CAMs generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | eigenpy |
Bindings between Numpy and Eigen using Boost.Python
Bindings between Numpy and Eigen using Boost.Python
|
|
| 1 | 2024-12-03 | diagnostics |
diagnostics
diagnostics
|
|
| 1 | 2024-12-03 | diagnostic_updater |
diagnostic_updater contains tools for easily updating diagnostics. it is commonly used in device drivers to keep track of the status of output topics, device status, etc.
diagnostic_updater contains tools for easily updating diagnostics. it is commonly used in device drivers to keep track of the status of output topics, device status, etc.
|
|
| 1 | 2024-12-03 | diagnostic_common_diagnostics |
diagnostic_common_diagnostics
diagnostic_common_diagnostics
|
|
| 1 | 2024-12-03 | diagnostic_aggregator |
diagnostic_aggregator
diagnostic_aggregator
|
|
| 1 | 2024-12-03 | bondpy |
Python implementation of bond, a mechanism for checking when
another process has terminated.
Python implementation of bond, a mechanism for checking when
another process has terminated.
|
|
| 1 | 2024-12-03 | bondcpp |
C++ implementation of bond, a mechanism for checking when
another process has terminated.
C++ implementation of bond, a mechanism for checking when
another process has terminated.
|
|
| 1 | 2024-12-03 | bond_core |
A bond allows two processes, A and B, to know when the other has
terminated, either cleanly or by crashing. The bond remains
connected until it is either broken explicitly or until a
heartbeat times out.
A bond allows two processes, A and B, to know when the other has
terminated, either cleanly or by crashing. The bond remains
connected until it is either broken explicitly or until a
heartbeat times out.
|
|
| 1 | 2024-12-03 | bond |
A bond allows two processes, A and B, to know when the other has
terminated, either cleanly or by crashing. The bond remains
connected until it is either broken explicitly or until a
heartbeat times out.
A bond allows two processes, A and B, to know when the other has
terminated, either cleanly or by crashing. The bond remains
connected until it is either broken explicitly or until a
heartbeat times out.
|
|
| 2 | 2024-12-02 | vision_opencv |
Packages for interfacing ROS2 with OpenCV, a library of programming functions for real time computer vision.
Packages for interfacing ROS2 with OpenCV, a library of programming functions for real time computer vision.
|
|
| 3 | 2024-12-02 | ur_msgs |
Message and service definitions for interacting with Universal Robots robot controllers.
Message and service definitions for interacting with Universal Robots robot controllers.
|
|
| 2 | 2024-12-02 | uncrustify_vendor |
Wrapper around uncrustify, providing nothing but a dependency on uncrustify, on some systems.
On others, it provides an ExternalProject build of uncrustify.
Wrapper around uncrustify, providing nothing but a dependency on uncrustify, on some systems.
On others, it provides an ExternalProject build of uncrustify.
|
|
| 1 | 2024-12-02 | tf2_2d |
A set of 2D geometry classes modeled after the 3D geometry classes in tf2.
A set of 2D geometry classes modeled after the 3D geometry classes in tf2.
|
|
| 1 | 2024-12-02 | test_rmw_implementation |
Test suite for ROS middleware API.
Test suite for ROS middleware API.
|
|
| 1 | 2024-12-02 | tango_icons_vendor |
tango_icons_vendor provides the public domain Tango icons for non-linux systems (
tango_icons_vendor provides the public domain Tango icons for non-linux systems (
|
|
| 1 | 2024-12-02 | rti_connext_dds_cmake_module |
Helper module to provide access to RTI products like Connext DDS Professional
Helper module to provide access to RTI products like Connext DDS Professional
|
|
| 1 | 2024-12-02 | rqt_topic |
rqt_topic provides a GUI plugin for displaying debug information about ROS topics including publishers, subscribers, publishing rate, and ROS Messages.
rqt_topic provides a GUI plugin for displaying debug information about ROS topics including publishers, subscribers, publishing rate, and ROS Messages.
|
|
| 1 | 2024-12-02 | rqt_srv |
A Python GUI plugin for introspecting available ROS service types.
A Python GUI plugin for introspecting available ROS service types.
|
|
| 1 | 2024-12-02 | rqt_shell |
rqt_shell is a Python GUI plugin providing an interactive shell.
rqt_shell is a Python GUI plugin providing an interactive shell.
|
|
| 1 | 2024-12-02 | rqt_service_caller |
rqt_service_caller provides a GUI plugin for calling arbitrary services.
rqt_service_caller provides a GUI plugin for calling arbitrary services.
|
|
| 1 | 2024-12-02 | rqt_reconfigure |
This rqt plugin provides a way to view and edit parameters on nodes.
This rqt plugin provides a way to view and edit parameters on nodes.
|
|
| 1 | 2024-12-02 | rqt_py_console |
rqt_py_console is a Python GUI plugin providing an interactive Python console.
rqt_py_console is a Python GUI plugin providing an interactive Python console.
|
|
| 1 | 2024-12-02 | rqt_py_common |
rqt_py_common provides common functionality for rqt plugins written in Python.
Despite no plugin is provided, this package is part of the rqt_common_plugins
repository to keep refactoring generic functionality from these common plugins
into this package as easy as possible.
Functionality included in this package should cover generic ROS concepts and
should not introduce any special dependencies beside "ros_base".
rqt_py_common provides common functionality for rqt plugins written in Python.
Despite no plugin is provided, this package is part of the rqt_common_plugins
repository to keep refactoring generic functionality from these common plugins
into this package as easy as possible.
Functionality included in this package should cover generic ROS concepts and
should not introduce any special dependencies beside "ros_base".
|
|
| 1 | 2024-12-02 | rqt_publisher |
rqt_publisher provides a GUI plugin for publishing arbitrary messages with fixed or computed field values.
rqt_publisher provides a GUI plugin for publishing arbitrary messages with fixed or computed field values.
|
|
| 1 | 2024-12-02 | rqt_plot |
rqt_plot provides a GUI plugin visualizing numeric values in a 2D plot using different plotting backends.
rqt_plot provides a GUI plugin visualizing numeric values in a 2D plot using different plotting backends.
|
|
| 1 | 2024-12-02 | rqt_msg |
A Python GUI plugin for introspecting available ROS message types.
A Python GUI plugin for introspecting available ROS message types.
|
|
| 1 | 2024-12-02 | rqt_gui_py |
rqt_gui_py enables GUI plugins to use the Python client library for ROS.
rqt_gui_py enables GUI plugins to use the Python client library for ROS.
|
|
| 1 | 2024-12-02 | rqt_gui_cpp |
rqt_gui_cpp enables GUI plugins to use the C++ client library for ROS.
rqt_gui_cpp enables GUI plugins to use the C++ client library for ROS.
|
|
| 1 | 2024-12-02 | rqt_gui |
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui.
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui.
|
|
| 1 | 2024-12-02 | rqt_graph |
rqt_graph provides a GUI plugin for visualizing the ROS
computation graph.
rqt_graph provides a GUI plugin for visualizing the ROS
computation graph.
|
|
| 1 | 2024-12-02 | rqt_console |
rqt_console provides a GUI plugin for displaying and filtering ROS messages.
rqt_console provides a GUI plugin for displaying and filtering ROS messages.
|
|
| 1 | 2024-12-02 | rqt_bag_plugins |
rqt_bag provides a GUI plugin for displaying and replaying ROS bag files.
rqt_bag provides a GUI plugin for displaying and replaying ROS bag files.
|
|
| 1 | 2024-12-02 | rqt_bag |
rqt_bag provides a GUI plugin for displaying and replaying ROS bag files.
rqt_bag provides a GUI plugin for displaying and replaying ROS bag files.
|
|
| 1 | 2024-12-02 | rqt_action |
rqt_action provides a feature to introspect all available ROS action types.
rqt_action provides a feature to introspect all available ROS action types.
|
|
| 1 | 2024-12-02 | rqt |
rqt is a Qt-based framework for GUI development for ROS.
rqt is a Qt-based framework for GUI development for ROS.
|
|
| 1 | 2024-12-02 | rosidl_core_runtime |
A configuration package defining runtime dependencies for core ROS interfaces.
A configuration package defining runtime dependencies for core ROS interfaces.
|
|
| 1 | 2024-12-02 | rosidl_core_generators |
A configuration package defining core ROS interface generators.
A configuration package defining core ROS interface generators.
|
|
| 1 | 2024-12-02 | rmw_implementation |
Proxy implementation of the ROS 2 Middleware Interface.
Proxy implementation of the ROS 2 Middleware Interface.
|
|
| 1 | 2024-12-02 | rmw_connextddsmicro |
A ROS 2 RMW implementation built with RTI Connext DDS Micro.
A ROS 2 RMW implementation built with RTI Connext DDS Micro.
|
|
| 1 | 2024-12-02 | rmw_connextdds_common |
Common source for RMW implementations built with RTI Connext DDS Professional and RTI Connext DDS Micro.
Common source for RMW implementations built with RTI Connext DDS Professional and RTI Connext DDS Micro.
|
|
| 1 | 2024-12-02 | rmw_connextdds |
A ROS 2 RMW implementation built with RTI Connext DDS Professional.
A ROS 2 RMW implementation built with RTI Connext DDS Professional.
|
|
| 2 | 2024-12-02 | resource_retriever |
This package retrieves data from url-format files such as http://,
ftp://, package:// file://, etc., and loads the data into memory.
The package:// url for ros packages is translated into a local
file:// url. The resourse retriever was initially designed to load
mesh files into memory, but it can be used for any type of
data. The resource retriever is based on the the libcurl library.
This package retrieves data from url-format files such as http://,
ftp://, package:// file://, etc., and loads the data into memory.
The package:// url for ros packages is translated into a local
file:// url. The resourse retriever was initially designed to load
mesh files into memory, but it can be used for any type of
data. The resource retriever is based on the the libcurl library.
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 1 | 2024-12-02 | python_qt_binding |
This stack provides Python bindings for Qt.
There are two providers: pyside and pyqt. PySide2 is available under
the GPL, LGPL and a commercial license. PyQt is released under the GPL.
Both the bindings and tools to build bindings are included from each
available provider. For PySide, it is called "Shiboken". For PyQt,
this is called "SIP".
Also provided is adapter code to make the user's Python code
independent of which binding provider was actually used which makes
it very easy to switch between these.
This stack provides Python bindings for Qt.
There are two providers: pyside and pyqt. PySide2 is available under
the GPL, LGPL and a commercial license. PyQt is released under the GPL.
Both the bindings and tools to build bindings are included from each
available provider. For PySide, it is called "Shiboken". For PyQt,
this is called "SIP".
Also provided is adapter code to make the user's Python code
independent of which binding provider was actually used which makes
it very easy to switch between these.
|
|
| 1 | 2024-12-02 | python_orocos_kdl_vendor |
Wrapper around PyKDL, providing nothing but a dependency on PyKDL on some systems.
On others, it fetches and builds python_orocos_kdl locally.
Wrapper around PyKDL, providing nothing but a dependency on PyKDL on some systems.
On others, it fetches and builds python_orocos_kdl locally.
|
|
| 1 | 2024-12-02 | polled_camera |
polled_camera contains a service and C++ helper classes for implementing a polled
camera driver node and requesting images from it. The package is currently for
internal use as the API is still under development.
polled_camera contains a service and C++ helper classes for implementing a polled
camera driver node and requesting images from it. The package is currently for
internal use as the API is still under development.
|
|
| 1 | 2024-12-02 | pluginlib |
The pluginlib package provides tools for writing and dynamically loading plugins using the ROS build infrastructure.
To work, these tools require plugin providers to register their plugins in the package.xml of their package.
The pluginlib package provides tools for writing and dynamically loading plugins using the ROS build infrastructure.
To work, these tools require plugin providers to register their plugins in the package.xml of their package.
|
|
| 1 | 2024-12-02 | orocos_kdl_vendor |
Wrapper around orocos_kdl, providing nothing but a dependency on orocos_kdl on some systems.
On others, it fetches and builds orocos_kdl locally.
Wrapper around orocos_kdl, providing nothing but a dependency on orocos_kdl on some systems.
On others, it fetches and builds orocos_kdl locally.
|
|
| 2 | 2024-12-02 | opencv_tests |
OpenCV tests for the Python and C++ implementations of CvBridge with Image message in ROS2.
OpenCV tests for the Python and C++ implementations of CvBridge with Image message in ROS2.
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | velocity_controllers |
Generic controller for forwarding commands.
Generic controller for forwarding commands.
|
|
| 3 | 2024-12-04 | ur_description |
URDF description for Universal Robots
URDF description for Universal Robots
|
|
| 1 | 2024-12-04 | tricycle_steering_controller |
Steering controller with tricycle kinematics. Rear fixed wheels are powering the vehicle and front wheel is steering.
Steering controller with tricycle kinematics. Rear fixed wheels are powering the vehicle and front wheel is steering.
|
|
| 1 | 2024-12-04 | tricycle_controller |
Controller for a tricycle drive mobile base
Controller for a tricycle drive mobile base
|
|
| 2 | 2024-12-04 | transmission_interface |
transmission_interface contains data structures for representing mechanical transmissions, methods for propagating values between actuator and joint spaces and tooling to support this.
transmission_interface contains data structures for representing mechanical transmissions, methods for propagating values between actuator and joint spaces and tooling to support this.
|
|
| 1 | 2024-12-04 | steering_controllers_library |
Package for steering robot configurations including odometry and interfaces.
Package for steering robot configurations including odometry and interfaces.
|
|
| 2 | 2024-12-04 | rqt_joint_trajectory_controller |
Graphical frontend for interacting with joint_trajectory_controller instances.
Graphical frontend for interacting with joint_trajectory_controller instances.
|
|
| 2 | 2024-12-04 | rqt_controller_manager |
Graphical frontend for interacting with the controller manager.
Graphical frontend for interacting with the controller manager.
|
|
| 1 | 2024-12-04 | ros2controlcli |
The ROS 2 command line tools for ROS2 Control.
The ROS 2 command line tools for ROS2 Control.
|
|
| 1 | 2024-12-04 | ros2_controllers_test_nodes |
Demo nodes for showing and testing functionalities of the ros2_control framework.
Demo nodes for showing and testing functionalities of the ros2_control framework.
|
|
| 1 | 2024-12-04 | ros2_controllers |
Metapackage for ros2_controllers related packages
Metapackage for ros2_controllers related packages
|
|
| 1 | 2024-12-04 | ros2_control_test_assets |
The package provides shared test resources for ros2_control stack
The package provides shared test resources for ros2_control stack
|
|
| 1 | 2024-12-04 | ros2_control |
Metapackage for ROS2 control related packages
Metapackage for ROS2 control related packages
|
|
| 2 | 2024-12-04 | rc_reason_msgs |
Msg and srv definitions for rc_reason_clients
Msg and srv definitions for rc_reason_clients
|
|
| 2 | 2024-12-04 | rc_reason_clients |
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
|
|
| 1 | 2024-12-04 | range_sensor_broadcaster |
Controller to publish readings of range sensors.
Controller to publish readings of range sensors.
|
|
| 1 | 2024-12-04 | py_trees |
Pythonic implementation of behaviour trees.
Pythonic implementation of behaviour trees.
|
|
| 2 | 2024-12-04 | position_controllers |
Generic controller for forwarding commands.
Generic controller for forwarding commands.
|
|
| 1 | 2024-12-04 | pose_broadcaster |
Broadcaster to publish cartesian states.
Broadcaster to publish cartesian states.
|
|
| 1 | 2024-12-04 | pid_controller |
Controller based on PID implememenation from control_toolbox package.
Controller based on PID implememenation from control_toolbox package.
|
|
| 1 | 2024-12-04 | parallel_gripper_controller |
The parallel_gripper_controller package
The parallel_gripper_controller package
|
|
| 2 | 2024-12-04 | mvsim |
A lightweight multivehicle simulation framework.
A lightweight multivehicle simulation framework.
|
|
| 1 | 2024-12-04 | mola_lidar_odometry |
LIDAR odometry system based on MOLA and MRPT components
LIDAR odometry system based on MOLA and MRPT components
|
|
| 1 | 2024-12-04 | mecanum_drive_controller |
Implementation of mecanum drive controller for 4 wheel drive.
Implementation of mecanum drive controller for 4 wheel drive.
|
|
| 3 | 2024-12-04 | joint_trajectory_controller |
Controller for executing joint-space trajectories on a group of joints
Controller for executing joint-space trajectories on a group of joints
|
|
| 1 | 2024-12-04 | joint_state_broadcaster |
Broadcaster to publish joint state
Broadcaster to publish joint state
|
|
| 1 | 2024-12-04 | joint_limits |
Package with interfaces for handling of joint limits in controllers or in hardware. The package also implements Saturation Joint Limiter for position-velocity-acceleration set and other individual interfaces.
Package with interfaces for handling of joint limits in controllers or in hardware. The package also implements Saturation Joint Limiter for position-velocity-acceleration set and other individual interfaces.
|
|
| 1 | 2024-12-04 | imu_sensor_broadcaster |
Controller to publish readings of IMU sensors.
Controller to publish readings of IMU sensors.
|
|
| 1 | 2024-12-04 | hardware_interface_testing |
ros2_control hardware interface testing
ros2_control hardware interface testing
|
|
| 2 | 2024-12-04 | hardware_interface |
ros2_control hardware interface
ros2_control hardware interface
|
|
| 1 | 2024-12-04 | gz_ros2_control_tests |
Gazebo ros2 control tests
Gazebo ros2 control tests
|
|
| 1 | 2024-12-04 | gz_ros2_control_demos |
gz_ros2_control_demos
gz_ros2_control_demos
|
|
| 1 | 2024-12-04 | gz_ros2_control |
Gazebo ros2_control package allows to control simulated robots using ros2_control framework.
Gazebo ros2_control package allows to control simulated robots using ros2_control framework.
|
|
| 1 | 2024-12-04 | gripper_controllers |
The gripper_controllers package
The gripper_controllers package
|
|
| 1 | 2024-12-04 | gpio_controllers |
Controllers to interact with gpios.
Controllers to interact with gpios.
|
|
| 2 | 2024-12-04 | forward_command_controller |
Generic controller for forwarding commands.
Generic controller for forwarding commands.
|
|
| 1 | 2024-12-04 | force_torque_sensor_broadcaster |
Controller to publish state of force-torque sensors.
Controller to publish state of force-torque sensors.
|
|
| 1 | 2024-12-04 | fastrtps |
*eprosima Fast DDS* (formerly Fast RTPS) is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group). eProsima Fast DDS implements the RTPS (Real Time Publish Subscribe) protocol, which provides publisher-subscriber communications over unreliable transports such as UDP, as defined and maintained by the Object Management Group (OMG) consortium. RTPS is also the wire interoperability protocol defined for the Data Distribution Service (DDS) standard. *eProsima Fast DDS* expose an API to access directly the RTPS protocol, giving the user full access to the protocol internals.
*eprosima Fast DDS* (formerly Fast RTPS) is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group). eProsima Fast DDS implements the RTPS (Real Time Publish Subscribe) protocol, which provides publisher-subscriber communications over unreliable transports such as UDP, as defined and maintained by the Object Management Group (OMG) consortium. RTPS is also the wire interoperability protocol defined for the Data Distribution Service (DDS) standard. *eProsima Fast DDS* expose an API to access directly the RTPS protocol, giving the user full access to the protocol internals.
|
|
| 2 | 2024-12-04 | effort_controllers |
Generic controller for forwarding commands.
Generic controller for forwarding commands.
|
|
| 1 | 2024-12-04 | ecal |
eCAL - enhanced Communication Abstraction Layer. A fast publish-subscribe cross-plattform middleware using Shared Memory and UDP.
eCAL - enhanced Communication Abstraction Layer. A fast publish-subscribe cross-plattform middleware using Shared Memory and UDP.
|
|
| 2 | 2024-12-04 | diff_drive_controller |
Controller for a differential-drive mobile base.
Controller for a differential-drive mobile base.
|
|
| 2 | 2024-12-04 | controller_manager_msgs |
Messages and services for the controller manager.
Messages and services for the controller manager.
|
|
| 2 | 2024-12-04 | controller_manager |
Description of controller_manager
Description of controller_manager
|
|
| 2 | 2024-12-04 | controller_interface |
Description of controller_interface
Description of controller_interface
|
|
| 1 | 2024-12-04 | coal |
An extension of the Flexible Collision Library.
An extension of the Flexible Collision Library.
|
|
| 1 | 2024-12-04 | bicycle_steering_controller |
Steering controller with bicycle kinematics. Rear fixed wheel is powering the vehicle and front wheel is steering.
Steering controller with bicycle kinematics. Rear fixed wheel is powering the vehicle and front wheel is steering.
|
|
| 1 | 2024-12-04 | admittance_controller |
Implementation of admittance controllers for different input and output interface.
Implementation of admittance controllers for different input and output interface.
|
|
| 2 | 2024-12-04 | ackermann_steering_controller |
Steering controller for Ackermann kinematics. Rear fixed wheels are powering the vehicle and front wheels are steering it.
Steering controller for Ackermann kinematics. Rear fixed wheels are powering the vehicle and front wheels are steering it.
|
|
| 1 | 2024-12-03 | zstd_vendor |
Zstd compression vendor package, providing a dependency for Zstd.
Zstd compression vendor package, providing a dependency for Zstd.
|
|
| 2 | 2024-12-03 | ur_robot_driver |
The new driver for Universal Robots UR3, UR5 and UR10 robots with CB3 controllers and the e-series.
The new driver for Universal Robots UR3, UR5 and UR10 robots with CB3 controllers and the e-series.
|
|
| 1 | 2024-12-03 | ur_moveit_config |
An example package with MoveIt2 configurations for UR robots.
An example package with MoveIt2 configurations for UR robots.
|
|
| 2 | 2024-12-03 | ur_dashboard_msgs |
Messages around the UR Dashboard server.
Messages around the UR Dashboard server.
|
|
| 1 | 2024-12-03 | ur_controllers |
Provides controllers that use the speed scaling interface of Universal Robots.
Provides controllers that use the speed scaling interface of Universal Robots.
|
|
| 2 | 2024-12-03 | ur_calibration |
Package for extracting the factory calibration from a UR robot and change it such that it can be used by ur_description to gain a correct URDF
Package for extracting the factory calibration from a UR robot and change it such that it can be used by ur_description to gain a correct URDF
|
|
| 1 | 2024-12-03 | ur |
Metapackage for universal robots
Metapackage for universal robots
|
|
| 3 | 2024-12-03 | tf2_tools |
tf2_tools
tf2_tools
|
|
| 3 | 2024-12-03 | tf2_sensor_msgs |
Small lib to transform sensor_msgs with tf. Most notably, PointCloud2
Small lib to transform sensor_msgs with tf. Most notably, PointCloud2
|
|
| 1 | 2024-12-03 | tf2_ros_py |
This package contains the ROS Python bindings for the tf2 library
This package contains the ROS Python bindings for the tf2 library
|
|
| 3 | 2024-12-03 | tf2_ros |
This package contains the C++ ROS bindings for the tf2 library
This package contains the C++ ROS bindings for the tf2 library
|
|
| 2 | 2024-12-03 | tf2_py |
The tf2_py package
The tf2_py package
|
|
| 3 | 2024-12-03 | tf2_msgs |
tf2_msgs
tf2_msgs
|
|
| 3 | 2024-12-03 | tf2_kdl |
KDL binding for tf2
KDL binding for tf2
|
|
| 3 | 2024-12-03 | tf2_geometry_msgs |
tf2_geometry_msgs
tf2_geometry_msgs
|
|
| 1 | 2024-12-03 | tf2_eigen_kdl |
Conversion functions between:
- Eigen and KDL
Conversion functions between:
- Eigen and KDL
|
|
| 3 | 2024-12-03 | tf2_eigen |
tf2_eigen
tf2_eigen
|
|
| 3 | 2024-12-03 | tf2_bullet |
tf2_bullet
tf2_bullet
|
|
| 3 | 2024-12-03 | tf2 |
tf2 is the second generation of the transform library, which lets
the user keep track of multiple coordinate frames over time. tf2
maintains the relationship between coordinate frames in a tree
structure buffered in time, and lets the user transform points,
vectors, etc between any two coordinate frames at any desired
point in time.
tf2 is the second generation of the transform library, which lets
the user keep track of multiple coordinate frames over time. tf2
maintains the relationship between coordinate frames in a tree
structure buffered in time, and lets the user transform points,
vectors, etc between any two coordinate frames at any desired
point in time.
|
|
| 3 | 2024-12-03 | test_tf2 |
tf2 unit tests
tf2 unit tests
|
|
| 1 | 2024-12-03 | test_bond |
Contains tests for [[bond]], including tests for [[bondcpp]].
Contains tests for [[bond]], including tests for [[bondcpp]].
|
|
| 1 | 2024-12-03 | sqlite3_vendor |
SQLite 3 vendor package
SQLite 3 vendor package
|
|
| 1 | 2024-12-03 | smclib |
The State Machine Compiler (SMC) from http://smc.sourceforge.net/
converts a language-independent description of a state machine
into the source code to support that state machine.
This package contains the libraries that a compiled state machine
depends on, but it does not contain the compiler itself.
The State Machine Compiler (SMC) from http://smc.sourceforge.net/
converts a language-independent description of a state machine
into the source code to support that state machine.
This package contains the libraries that a compiled state machine
depends on, but it does not contain the compiler itself.
|
|
| 1 | 2024-12-03 | self_test |
self_test
self_test
|
|
| 1 | 2024-12-03 | rosbag2_transport |
Layer encapsulating ROS middleware to allow rosbag2 to be used with or without middleware
Layer encapsulating ROS middleware to allow rosbag2 to be used with or without middleware
|
|
| 1 | 2024-12-03 | rosbag2_tests |
Tests package for rosbag2
Tests package for rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_test_msgdefs |
message definition test fixtures for rosbag2 schema recording
message definition test fixtures for rosbag2 schema recording
|
|
| 1 | 2024-12-03 | rosbag2_test_common |
Commonly used test helper classes and fixtures for rosbag2
Commonly used test helper classes and fixtures for rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_storage_sqlite3 |
ROSBag2 SQLite3 storage plugin
ROSBag2 SQLite3 storage plugin
|
|
| 2 | 2024-12-03 | rosbag2_storage_mcap |
rosbag2 storage plugin using the MCAP file format
rosbag2 storage plugin using the MCAP file format
|
|
| 1 | 2024-12-03 | rosbag2_storage_default_plugins |
Intermediate metapackage to point at default storage plugin(s) for rosbag2
Intermediate metapackage to point at default storage plugin(s) for rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_storage |
ROS2 independent storage format to store serialized ROS2 messages
ROS2 independent storage format to store serialized ROS2 messages
|
|
| 1 | 2024-12-03 | rosbag2_py |
Python API for rosbag2
Python API for rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_performance_benchmarking_msgs |
A package containing rosbag2 performance benchmarking specific messages.
A package containing rosbag2 performance benchmarking specific messages.
|
|
| 1 | 2024-12-03 | rosbag2_performance_benchmarking |
Code to benchmark rosbag2
Code to benchmark rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_interfaces |
Interface definitions for controlling rosbag2
Interface definitions for controlling rosbag2
|
|
| 1 | 2024-12-03 | rosbag2_examples_py |
Python bag writing tutorial
Python bag writing tutorial
|
|
| 1 | 2024-12-03 | rosbag2_examples_cpp |
rosbag2 C++ API tutorials and examples
rosbag2 C++ API tutorials and examples
|
|
| 1 | 2024-12-03 | rosbag2_cpp |
C++ ROSBag2 client library
C++ ROSBag2 client library
|
|
| 1 | 2024-12-03 | rosbag2_compression_zstd |
Zstandard compression library implementation of rosbag2_compression
Zstandard compression library implementation of rosbag2_compression
|
|
| 1 | 2024-12-03 | rosbag2_compression |
Compression implementations for rosbag2 bags and messages.
Compression implementations for rosbag2 bags and messages.
|
|
| 1 | 2024-12-03 | rosbag2 |
Meta package for rosbag2 related packages
Meta package for rosbag2 related packages
|
|
| 1 | 2024-12-03 | ros_industrial_cmake_boilerplate |
Contains boilerplate cmake script, macros and utils
Contains boilerplate cmake script, macros and utils
|
|
| 2 | 2024-12-03 | ros_babel_fish_test_msgs |
Test messages for the ros_babel_fish project tests.
Test messages for the ros_babel_fish project tests.
|
|
| 2 | 2024-12-03 | ros_babel_fish |
A runtime message handler for ROS.
Allows subscription, publishing, calling of services and actions with messages known only at runtime as long
as they are available in the local environment.
A runtime message handler for ROS.
Allows subscription, publishing, calling of services and actions with messages known only at runtime as long
as they are available in the local environment.
|
|
| 1 | 2024-12-03 | ros2bag |
Entry point for rosbag in ROS 2
Entry point for rosbag in ROS 2
|
|
| 1 | 2024-12-03 | robot_calibration_msgs |
Messages for calibrating a robot
Messages for calibrating a robot
|
|
| 1 | 2024-12-03 | robot_calibration |
Calibrate a Robot
Calibrate a Robot
|
|
| 1 | 2024-12-03 | realtime_tools |
Contains a set of tools that can be used from a hard
realtime thread, without breaking the realtime behavior.
Contains a set of tools that can be used from a hard
realtime thread, without breaking the realtime behavior.
|
|
| 1 | 2024-12-03 | rclcpp_lifecycle |
Package containing a prototype for lifecycle implementation
Package containing a prototype for lifecycle implementation
|
|
| 1 | 2024-12-03 | rclcpp_components |
Package containing tools for dynamically loadable components
Package containing tools for dynamically loadable components
|
|
| 1 | 2024-12-03 | rclcpp_action |
Adds action APIs for C++.
Adds action APIs for C++.
|
|
| 1 | 2024-12-03 | rclcpp |
The ROS client library in C++.
The ROS client library in C++.
|
|
| 1 | 2024-12-03 | python_mrpt |
Python wrapper for Mobile Robot Programming Toolkit (MRPT) libraries
Python wrapper for Mobile Robot Programming Toolkit (MRPT) libraries
|
|
| 1 | 2024-12-03 | pluginlib |
The pluginlib package provides tools for writing and dynamically loading plugins using the ROS build infrastructure.
To work, these tools require plugin providers to register their plugins in the package.xml of their package.
The pluginlib package provides tools for writing and dynamically loading plugins using the ROS build infrastructure.
To work, these tools require plugin providers to register their plugins in the package.xml of their package.
|
|
| 1 | 2024-12-03 | pinocchio |
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
|
|
| 1 | 2024-12-03 | osrf_pycommon |
Commonly needed Python modules, used by Python software developed at OSRF.
Commonly needed Python modules, used by Python software developed at OSRF.
|
|
| 1 | 2024-12-03 | nav2_minimal_tb4_sim |
Nav2 Minimum TurtleBot4 Simulation
Nav2 Minimum TurtleBot4 Simulation
|
|
| 1 | 2024-12-03 | nav2_minimal_tb4_description |
Nav2's minimum Turtlebot4 Description package
Nav2's minimum Turtlebot4 Description package
|
|
| 1 | 2024-12-03 | nav2_minimal_tb3_sim |
Nav2 Minimum TurtleBot3 Simulation
Nav2 Minimum TurtleBot3 Simulation
|
|
| 1 | 2024-12-03 | mrpt_libtclap |
Mobile Robot Programming Toolkit (MRPT) libraries (tclap C++ library).
This package contains: mrpt-tclap
Mobile Robot Programming Toolkit (MRPT) libraries (tclap C++ library).
This package contains: mrpt-tclap
|
|
| 1 | 2024-12-03 | mrpt_libslam |
Mobile Robot Programming Toolkit (MRPT) libraries (slam/vision C++ libraries).
This package contains: mrpt-slam, mrpt-vision
Mobile Robot Programming Toolkit (MRPT) libraries (slam/vision C++ libraries).
This package contains: mrpt-slam, mrpt-vision
|
|
| 1 | 2024-12-03 | mrpt_libros_bridge |
Mobile Robot Programming Toolkit (MRPT) libraries (ros2bridge C++ library).
This package contains: mrpt-ros2bridge
Mobile Robot Programming Toolkit (MRPT) libraries (ros2bridge C++ library).
This package contains: mrpt-ros2bridge
|
|
| 1 | 2024-12-03 | mrpt_libposes |
Mobile Robot Programming Toolkit (MRPT) libraries (poses C++ libraries).
This package contains: mrpt-poses, mrpt-tfest, mrpt-bayes
Mobile Robot Programming Toolkit (MRPT) libraries (poses C++ libraries).
This package contains: mrpt-poses, mrpt-tfest, mrpt-bayes
|
|
| 1 | 2024-12-03 | mrpt_libopengl |
Mobile Robot Programming Toolkit (MRPT) libraries (opengl/img C++ libraries).
This package contains: mrpt-opengl, mrpt-img
Mobile Robot Programming Toolkit (MRPT) libraries (opengl/img C++ libraries).
This package contains: mrpt-opengl, mrpt-img
|
|
| 1 | 2024-12-03 | mrpt_libobs |
Mobile Robot Programming Toolkit (MRPT) libraries (obs C++ libraries).
This package contains: mrpt-obs, mrpt-topography
Mobile Robot Programming Toolkit (MRPT) libraries (obs C++ libraries).
This package contains: mrpt-obs, mrpt-topography
|
|
| 1 | 2024-12-03 | mrpt_libnav |
Mobile Robot Programming Toolkit (MRPT) libraries (nav C++ libraries).
This package contains: mrpt-nav, mrpt-kinematics
Mobile Robot Programming Toolkit (MRPT) libraries (nav C++ libraries).
This package contains: mrpt-nav, mrpt-kinematics
|
|
| 1 | 2024-12-03 | mrpt_libmath |
Mobile Robot Programming Toolkit (MRPT) libraries (math C++ libraries).
This package contains: mrpt-math
Mobile Robot Programming Toolkit (MRPT) libraries (math C++ libraries).
This package contains: mrpt-math
|
|
| 1 | 2024-12-03 | mrpt_libmaps |
Mobile Robot Programming Toolkit (MRPT) libraries (maps C++ libraries).
This package contains: mrpt-maps, mrpt-graphs
Mobile Robot Programming Toolkit (MRPT) libraries (maps C++ libraries).
This package contains: mrpt-maps, mrpt-graphs
|
|
| 1 | 2024-12-03 | mrpt_libhwdrivers |
Mobile Robot Programming Toolkit (MRPT) libraries (hwdrivers C++ libraries).
This package contains: mrpt-hwdrivers, mrpt-comms
Mobile Robot Programming Toolkit (MRPT) libraries (hwdrivers C++ libraries).
This package contains: mrpt-hwdrivers, mrpt-comms
|
|
| 1 | 2024-12-03 | mrpt_libgui |
Mobile Robot Programming Toolkit (MRPT) libraries (GUI C++ libraries).
This package contains: mrpt-gui, nanogui
Mobile Robot Programming Toolkit (MRPT) libraries (GUI C++ libraries).
This package contains: mrpt-gui, nanogui
|
|
| 1 | 2024-12-03 | mrpt_libbase |
Mobile Robot Programming Toolkit (MRPT) libraries (core C++ libraries).
This package contains: mrpt-io, mrpt-serialization, mrpt-random, mrpt-system, mrpt-rtti, mrpt-containers, mrpt-typemeta, mrpt-core, mrpt-random, mrpt-config, mrpt-expr
Mobile Robot Programming Toolkit (MRPT) libraries (core C++ libraries).
This package contains: mrpt-io, mrpt-serialization, mrpt-random, mrpt-system, mrpt-rtti, mrpt-containers, mrpt-typemeta, mrpt-core, mrpt-random, mrpt-config, mrpt-expr
|
|
| 1 | 2024-12-03 | mrpt_libapps |
Mobile Robot Programming Toolkit (MRPT) libraries (apps C++ libraries).
This package contains: mrpt-apps lib, mrpt-graphslam
Mobile Robot Programming Toolkit (MRPT) libraries (apps C++ libraries).
This package contains: mrpt-apps lib, mrpt-graphslam
|
|
| 1 | 2024-12-03 | mrpt_apps |
Mobile Robot Programming Toolkit (MRPT) applications
Mobile Robot Programming Toolkit (MRPT) applications
|
|
| 2 | 2024-12-03 | mcap_vendor |
mcap vendor package
mcap vendor package
|
|
| 1 | 2024-12-03 | liblz4_vendor |
LZ4 compression vendor package, providing a dependency for LZ4.
LZ4 compression vendor package, providing a dependency for LZ4.
|
|
| 3 | 2024-12-03 | geometry2 |
A metapackage to bring in the default packages second generation Transform Library in ros, tf2.
A metapackage to bring in the default packages second generation Transform Library in ros, tf2.
|
|
| 1 | 2024-12-03 | examples_tf2_py |
Has examples of using the tf2 Python API.
Has examples of using the tf2 Python API.
|
|
| 1 | 2024-12-03 | eigenpy |
Bindings between Numpy and Eigen using Boost.Python
Bindings between Numpy and Eigen using Boost.Python
|
|
| 1 | 2024-12-03 | diagnostics |
diagnostics
diagnostics
|
|
| 1 | 2024-12-03 | diagnostic_updater |
diagnostic_updater contains tools for easily updating diagnostics. it is commonly used in device drivers to keep track of the status of output topics, device status, etc.
diagnostic_updater contains tools for easily updating diagnostics. it is commonly used in device drivers to keep track of the status of output topics, device status, etc.
|
|
| 1 | 2024-12-03 | diagnostic_common_diagnostics |
diagnostic_common_diagnostics
diagnostic_common_diagnostics
|
|
| 1 | 2024-12-03 | diagnostic_aggregator |
diagnostic_aggregator
diagnostic_aggregator
|
|
| 1 | 2024-12-03 | bondpy |
Python implementation of bond, a mechanism for checking when
another process has terminated.
Python implementation of bond, a mechanism for checking when
another process has terminated.
|
|
| 1 | 2024-12-03 | bondcpp |
C++ implementation of bond, a mechanism for checking when
another process has terminated.
C++ implementation of bond, a mechanism for checking when
another process has terminated.
|
|
| 1 | 2024-12-03 | bond_core |
A bond allows two processes, A and B, to know when the other has
terminated, either cleanly or by crashing. The bond remains
connected until it is either broken explicitly or until a
heartbeat times out.
A bond allows two processes, A and B, to know when the other has
terminated, either cleanly or by crashing. The bond remains
connected until it is either broken explicitly or until a
heartbeat times out.
|
|
| 1 | 2024-12-03 | bond |
A bond allows two processes, A and B, to know when the other has
terminated, either cleanly or by crashing. The bond remains
connected until it is either broken explicitly or until a
heartbeat times out.
A bond allows two processes, A and B, to know when the other has
terminated, either cleanly or by crashing. The bond remains
connected until it is either broken explicitly or until a
heartbeat times out.
|
|
| 2 | 2024-12-02 | vision_opencv |
Packages for interfacing ROS2 with OpenCV, a library of programming functions for real time computer vision.
Packages for interfacing ROS2 with OpenCV, a library of programming functions for real time computer vision.
|
|
| 3 | 2024-12-02 | ur_msgs |
Message and service definitions for interacting with Universal Robots robot controllers.
Message and service definitions for interacting with Universal Robots robot controllers.
|
|
| 1 | 2024-12-02 | tf2_2d |
A set of 2D geometry classes modeled after the 3D geometry classes in tf2.
A set of 2D geometry classes modeled after the 3D geometry classes in tf2.
|
|
| 1 | 2024-12-02 | test_osrf_testing_tools_cpp |
Test package, which uses things exported by osrf_testing_tools_cpp.
Test package, which uses things exported by osrf_testing_tools_cpp.
|
|
| 1 | 2024-12-02 | tango_icons_vendor |
tango_icons_vendor provides the public domain Tango icons for non-linux systems (
tango_icons_vendor provides the public domain Tango icons for non-linux systems (
|
|
| 1 | 2024-12-02 | rti_connext_dds_cmake_module |
Helper module to provide access to RTI products like Connext DDS Professional
Helper module to provide access to RTI products like Connext DDS Professional
|
|
| 1 | 2024-12-02 | rqt_topic |
rqt_topic provides a GUI plugin for displaying debug information about ROS topics including publishers, subscribers, publishing rate, and ROS Messages.
rqt_topic provides a GUI plugin for displaying debug information about ROS topics including publishers, subscribers, publishing rate, and ROS Messages.
|
|
| 1 | 2024-12-02 | rqt_srv |
A Python GUI plugin for introspecting available ROS service types.
A Python GUI plugin for introspecting available ROS service types.
|
|
| 1 | 2024-12-02 | rqt_shell |
rqt_shell is a Python GUI plugin providing an interactive shell.
rqt_shell is a Python GUI plugin providing an interactive shell.
|
|
| 1 | 2024-12-02 | rqt_service_caller |
rqt_service_caller provides a GUI plugin for calling arbitrary services.
rqt_service_caller provides a GUI plugin for calling arbitrary services.
|
|
| 1 | 2024-12-02 | rqt_reconfigure |
This rqt plugin provides a way to view and edit parameters on nodes.
This rqt plugin provides a way to view and edit parameters on nodes.
|
|
| 1 | 2024-12-02 | rqt_py_console |
rqt_py_console is a Python GUI plugin providing an interactive Python console.
rqt_py_console is a Python GUI plugin providing an interactive Python console.
|
|
| 1 | 2024-12-02 | rqt_py_common |
rqt_py_common provides common functionality for rqt plugins written in Python.
Despite no plugin is provided, this package is part of the rqt_common_plugins
repository to keep refactoring generic functionality from these common plugins
into this package as easy as possible.
Functionality included in this package should cover generic ROS concepts and
should not introduce any special dependencies beside "ros_base".
rqt_py_common provides common functionality for rqt plugins written in Python.
Despite no plugin is provided, this package is part of the rqt_common_plugins
repository to keep refactoring generic functionality from these common plugins
into this package as easy as possible.
Functionality included in this package should cover generic ROS concepts and
should not introduce any special dependencies beside "ros_base".
|
|
| 1 | 2024-12-02 | rqt_publisher |
rqt_publisher provides a GUI plugin for publishing arbitrary messages with fixed or computed field values.
rqt_publisher provides a GUI plugin for publishing arbitrary messages with fixed or computed field values.
|
|
| 1 | 2024-12-02 | rqt_plot |
rqt_plot provides a GUI plugin visualizing numeric values in a 2D plot using different plotting backends.
rqt_plot provides a GUI plugin visualizing numeric values in a 2D plot using different plotting backends.
|
|
| 1 | 2024-12-02 | rqt_msg |
A Python GUI plugin for introspecting available ROS message types.
A Python GUI plugin for introspecting available ROS message types.
|
|
| 1 | 2024-12-02 | rqt_gui_py |
rqt_gui_py enables GUI plugins to use the Python client library for ROS.
rqt_gui_py enables GUI plugins to use the Python client library for ROS.
|
|
| 1 | 2024-12-02 | rqt_gui_cpp |
rqt_gui_cpp enables GUI plugins to use the C++ client library for ROS.
rqt_gui_cpp enables GUI plugins to use the C++ client library for ROS.
|
|
| 1 | 2024-12-02 | rqt_gui |
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui.
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui.
|
|
| 1 | 2024-12-02 | rqt_graph |
rqt_graph provides a GUI plugin for visualizing the ROS
computation graph.
rqt_graph provides a GUI plugin for visualizing the ROS
computation graph.
|
|
| 1 | 2024-12-02 | rqt_console |
rqt_console provides a GUI plugin for displaying and filtering ROS messages.
rqt_console provides a GUI plugin for displaying and filtering ROS messages.
|
|
| 1 | 2024-12-02 | rqt_bag_plugins |
rqt_bag provides a GUI plugin for displaying and replaying ROS bag files.
rqt_bag provides a GUI plugin for displaying and replaying ROS bag files.
|
|
| 1 | 2024-12-02 | rqt_bag |
rqt_bag provides a GUI plugin for displaying and replaying ROS bag files.
rqt_bag provides a GUI plugin for displaying and replaying ROS bag files.
|
|
| 1 | 2024-12-02 | rqt_action |
rqt_action provides a feature to introspect all available ROS action types.
rqt_action provides a feature to introspect all available ROS action types.
|
|
| 1 | 2024-12-02 | rqt |
rqt is a Qt-based framework for GUI development for ROS.
rqt is a Qt-based framework for GUI development for ROS.
|
|
| 1 | 2024-12-02 | rpyutils |
Package containing various utility types and functions for Python
Package containing various utility types and functions for Python
|
|
| 1 | 2024-12-02 | rosidl_core_runtime |
A configuration package defining runtime dependencies for core ROS interfaces.
A configuration package defining runtime dependencies for core ROS interfaces.
|
|
| 1 | 2024-12-02 | rosidl_core_generators |
A configuration package defining core ROS interface generators.
A configuration package defining core ROS interface generators.
|
|
| 1 | 2024-12-02 | ros_environment |
The package provides the environment variables `ROS_VERSION` and `ROS_DISTRO`.
The package provides the environment variables `ROS_VERSION` and `ROS_DISTRO`.
|
|
| 2 | 2024-12-02 | robot_state_publisher |
This package take the joint angles of a robot as input, and publishes the 3D poses of the robot links to tf2, using a kinematic tree model of the robot.
This package take the joint angles of a robot as input, and publishes the 3D poses of the robot links to tf2, using a kinematic tree model of the robot.
|
|
| 1 | 2024-12-02 | rmw_connextddsmicro |
A ROS 2 RMW implementation built with RTI Connext DDS Micro.
A ROS 2 RMW implementation built with RTI Connext DDS Micro.
|
|
| 1 | 2024-12-02 | rmw_connextdds_common |
Common source for RMW implementations built with RTI Connext DDS Professional and RTI Connext DDS Micro.
Common source for RMW implementations built with RTI Connext DDS Professional and RTI Connext DDS Micro.
|
|
| 1 | 2024-12-02 | rmw_connextdds |
A ROS 2 RMW implementation built with RTI Connext DDS Professional.
A ROS 2 RMW implementation built with RTI Connext DDS Professional.
|
|
| 2 | 2024-12-02 | resource_retriever |
This package retrieves data from url-format files such as http://,
ftp://, package:// file://, etc., and loads the data into memory.
The package:// url for ros packages is translated into a local
file:// url. The resourse retriever was initially designed to load
mesh files into memory, but it can be used for any type of
data. The resource retriever is based on the the libcurl library.
This package retrieves data from url-format files such as http://,
ftp://, package:// file://, etc., and loads the data into memory.
The package:// url for ros packages is translated into a local
file:// url. The resourse retriever was initially designed to load
mesh files into memory, but it can be used for any type of
data. The resource retriever is based on the the libcurl library.
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 1 | 2024-12-02 | qt_gui_py_common |
qt_gui_py_common provides common functionality for GUI plugins written in Python.
qt_gui_py_common provides common functionality for GUI plugins written in Python.
|
|
| 1 | 2024-12-02 | qt_gui_cpp |
qt_gui_cpp provides the foundation for C++-bindings for qt_gui and creates bindings for every generator available.
At least one specific binding must be available in order to use C++-plugins.
qt_gui_cpp provides the foundation for C++-bindings for qt_gui and creates bindings for every generator available.
At least one specific binding must be available in order to use C++-plugins.
|
|
| 1 | 2024-12-02 | qt_gui_core |
Integration of the ROS package system and ROS-specific plugins for a Qt-based GUI.
Integration of the ROS package system and ROS-specific plugins for a Qt-based GUI.
|
|
| 1 | 2024-12-02 | qt_gui_app |
qt_gui_app provides the main to start an instance of the integrated graphical user interface provided by qt_gui.
qt_gui_app provides the main to start an instance of the integrated graphical user interface provided by qt_gui.
|
|
| 1 | 2024-12-02 | qt_gui |
qt_gui provides the infrastructure for an integrated graphical user interface based on Qt.
It is extensible with Python- and C++-based plugins (implemented in separate packages) which can contribute arbitrary widgets.
It requires either PyQt or PySide bindings.
qt_gui provides the infrastructure for an integrated graphical user interface based on Qt.
It is extensible with Python- and C++-based plugins (implemented in separate packages) which can contribute arbitrary widgets.
It requires either PyQt or PySide bindings.
|
|
| 1 | 2024-12-02 | qt_dotgraph |
qt_dotgraph provides helpers to work with dot graphs.
qt_dotgraph provides helpers to work with dot graphs.
|
|
| 1 | 2024-12-02 | python_qt_binding |
This stack provides Python bindings for Qt.
There are two providers: pyside and pyqt. PySide2 is available under
the GPL, LGPL and a commercial license. PyQt is released under the GPL.
Both the bindings and tools to build bindings are included from each
available provider. For PySide, it is called "Shiboken". For PyQt,
this is called "SIP".
Also provided is adapter code to make the user's Python code
independent of which binding provider was actually used which makes
it very easy to switch between these.
This stack provides Python bindings for Qt.
There are two providers: pyside and pyqt. PySide2 is available under
the GPL, LGPL and a commercial license. PyQt is released under the GPL.
Both the bindings and tools to build bindings are included from each
available provider. For PySide, it is called "Shiboken". For PyQt,
this is called "SIP".
Also provided is adapter code to make the user's Python code
independent of which binding provider was actually used which makes
it very easy to switch between these.
|
|
| 1 | 2024-12-02 | python_orocos_kdl_vendor |
Wrapper around PyKDL, providing nothing but a dependency on PyKDL on some systems.
On others, it fetches and builds python_orocos_kdl locally.
Wrapper around PyKDL, providing nothing but a dependency on PyKDL on some systems.
On others, it fetches and builds python_orocos_kdl locally.
|
|
| 3 | 2024-12-02 | python_cmake_module |
Provide CMake module with extra functionality for Python.
Provide CMake module with extra functionality for Python.
|
|
| 1 | 2024-12-02 | polled_camera |
polled_camera contains a service and C++ helper classes for implementing a polled
camera driver node and requesting images from it. The package is currently for
internal use as the API is still under development.
polled_camera contains a service and C++ helper classes for implementing a polled
camera driver node and requesting images from it. The package is currently for
internal use as the API is still under development.
|
|
| 1 | 2024-12-02 | osrf_testing_tools_cpp |
Testing tools for C++, and is used in various OSRF projects.
Testing tools for C++, and is used in various OSRF projects.
|
|
| 1 | 2024-12-02 | orocos_kdl_vendor |
Wrapper around orocos_kdl, providing nothing but a dependency on orocos_kdl on some systems.
On others, it fetches and builds orocos_kdl locally.
Wrapper around orocos_kdl, providing nothing but a dependency on orocos_kdl on some systems.
On others, it fetches and builds orocos_kdl locally.
|
|
| 2 | 2024-12-02 | opencv_tests |
OpenCV tests for the Python and C++ implementations of CvBridge with Image message in ROS2.
OpenCV tests for the Python and C++ implementations of CvBridge with Image message in ROS2.
|
|
| 1 | 2024-12-02 | libcurl_vendor |
Wrapper around libcurl, it provides a fixed CMake module and an ExternalProject build of it.
Wrapper around libcurl, it provides a fixed CMake module and an ExternalProject build of it.
|
|
| 1 | 2024-12-02 | laser_geometry |
This package contains a class for converting from a 2D laser scan as defined by
sensor_msgs/LaserScan into a point cloud as defined by sensor_msgs/PointCloud
or sensor_msgs/PointCloud2. In particular, it contains functionality to account
for the skew resulting from moving robots or tilting laser scanners.
This package contains a class for converting from a 2D laser scan as defined by
sensor_msgs/LaserScan into a point cloud as defined by sensor_msgs/PointCloud
or sensor_msgs/PointCloud2. In particular, it contains functionality to account
for the skew resulting from moving robots or tilting laser scanners.
|
|
| 1 | 2024-12-02 | keyboard_handler |
Handler for input from keyboard
Handler for input from keyboard
|
|
| 2 | 2024-12-02 | kdl_parser |
The Kinematics and Dynamics Library (KDL) defines a tree structure
to represent the kinematic and dynamic parameters of a robot
mechanism.
The Kinematics and Dynamics Library (KDL) defines a tree structure
to represent the kinematic and dynamic parameters of a robot
mechanism.
|
|
| 1 | 2024-12-02 | interactive_markers |
3D interactive marker communication library for RViz and similar tools.
3D interactive marker communication library for RViz and similar tools.
|
|
| 1 | 2024-12-02 | image_transport_py |
Python API for image_transport
Python API for image_transport
|
|
| 1 | 2024-12-02 | image_transport |
image_transport should always be used to subscribe to and publish images. It provides transparent
support for transporting images in low-bandwidth compressed formats. Examples (provided by separate
plugin packages) include JPEG/PNG compression and Theora streaming video.
image_transport should always be used to subscribe to and publish images. It provides transparent
support for transporting images in low-bandwidth compressed formats. Examples (provided by separate
plugin packages) include JPEG/PNG compression and Theora streaming video.
|
|
| 3 | 2024-12-02 | image_geometry |
`image_geometry` contains C++ and Python libraries for interpreting images
geometrically. It interfaces the calibration parameters in sensor_msgs/CameraInfo
messages with OpenCV functions such as image rectification, much as cv_bridge
interfaces ROS sensor_msgs/Image with OpenCV data types.
`image_geometry` contains C++ and Python libraries for interpreting images
geometrically. It interfaces the calibration parameters in sensor_msgs/CameraInfo
messages with OpenCV functions such as image rectification, much as cv_bridge
interfaces ROS sensor_msgs/Image with OpenCV data types.
|
|
| 1 | 2024-12-02 | image_common |
Common code for working with images in ROS.
Common code for working with images in ROS.
|
|
| 1 | 2024-12-02 | gz_utils_vendor |
Vendor package for: gz-utils3 3.1.0
Gazebo Utils : Classes and functions for robot applications
Vendor package for: gz-utils3 3.1.0
Gazebo Utils : Classes and functions for robot applications
|
|
| 1 | 2024-12-02 | gz_math_vendor |
Vendor package for: gz-math8 8.0.0
Gazebo Math : Math classes and functions for robot applications
Vendor package for: gz-math8 8.0.0
Gazebo Math : Math classes and functions for robot applications
|
|
| 1 | 2024-12-02 | gtsam |
gtsam
gtsam
|
|
| 1 | 2024-12-02 | cv_bridge |
This contains CvBridge, which converts between ROS2
Image messages and OpenCV images.
This contains CvBridge, which converts between ROS2
Image messages and OpenCV images.
|
|
| 1 | 2024-12-02 | control_toolbox |
The control toolbox contains modules that are useful across all controllers.
The control toolbox contains modules that are useful across all controllers.
|
|
| 1 | 2024-12-02 | class_loader |
The class_loader package is a ROS-independent package for loading plugins during runtime and the foundation of the higher level ROS "pluginlib" library.
class_loader utilizes the host operating system's runtime loader to open runtime libraries (e.g. .so/.dll files), introspect the library for exported plugin classes, and allows users to instantiate objects of these exported classes without the explicit declaration (i.e. header file) for those classes.
The class_loader package is a ROS-independent package for loading plugins during runtime and the foundation of the higher level ROS "pluginlib" library.
class_loader utilizes the host operating system's runtime loader to open runtime libraries (e.g. .so/.dll files), introspect the library for exported plugin classes, and allows users to instantiate objects of these exported classes without the explicit declaration (i.e. header file) for those classes.
|
|
| 2 | 2024-12-02 | camera_info_manager_py |
Python interface for camera calibration information.
This ROS package provides a CameraInfo interface for Python camera
drivers similar to the C++ camera_info_manager package.
Python interface for camera calibration information.
This ROS package provides a CameraInfo interface for Python camera
drivers similar to the C++ camera_info_manager package.
|
|
| 1 | 2024-12-02 | camera_info_manager |
This package provides a C++ interface for camera calibration
information. It provides CameraInfo, and handles SetCameraInfo
service requests, saving and restoring the camera calibration
data.
This package provides a C++ interface for camera calibration
information. It provides CameraInfo, and handles SetCameraInfo
service requests, saving and restoring the camera calibration
data.
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | mvsim |
A lightweight multivehicle simulation framework.
A lightweight multivehicle simulation framework.
|
|
| 1 | 2024-12-04 | eiquadprog |
Eiquadprog a QP solver using active sets
Eiquadprog a QP solver using active sets
|
|
| 1 | 2024-12-04 | coal |
An extension of the Flexible Collision Library.
An extension of the Flexible Collision Library.
|
|
| 1 | 2024-12-03 | tesseract_visualization |
The tesseract_visualization package
The tesseract_visualization package
|
|
| 1 | 2024-12-03 | tesseract_urdf |
The tesseract_urdf package for parsing tesseract specific urdf
The tesseract_urdf package for parsing tesseract specific urdf
|
|
| 1 | 2024-12-03 | tesseract_support |
The tesseract_support package containing files for test and examples
The tesseract_support package containing files for test and examples
|
|
| 1 | 2024-12-03 | tesseract_state_solver |
The state solver for tesseract_scene_graph
The state solver for tesseract_scene_graph
|
|
| 1 | 2024-12-03 | tesseract_srdf |
The tesseract_srdf package for parsing Tesseract specific srdf
The tesseract_srdf package for parsing Tesseract specific srdf
|
|
| 1 | 2024-12-03 | tesseract_scene_graph |
The tesseract_scene_graph package
The tesseract_scene_graph package
|
|
| 1 | 2024-12-03 | tesseract_kinematics |
The tesseract_kinematics package contains kinematics related libraries.
The tesseract_kinematics package contains kinematics related libraries.
|
|
| 1 | 2024-12-03 | tesseract_geometry |
The tesseract_geometry package
The tesseract_geometry package
|
|
| 1 | 2024-12-03 | tesseract_environment |
The tesseract_environment package contains environment
The tesseract_environment package contains environment
|
|
| 1 | 2024-12-03 | tesseract_common |
Contains common macros, utils and types used throughout
Contains common macros, utils and types used throughout
|
|
| 1 | 2024-12-03 | tesseract_collision |
The tesseract_collision package
The tesseract_collision package
|
|
| 1 | 2024-12-03 | ros_industrial_cmake_boilerplate |
Contains boilerplate cmake script, macros and utils
Contains boilerplate cmake script, macros and utils
|
|
| 1 | 2024-12-03 | python_mrpt |
Python wrapper for Mobile Robot Programming Toolkit (MRPT) libraries
Python wrapper for Mobile Robot Programming Toolkit (MRPT) libraries
|
|
| 1 | 2024-12-03 | pinocchio |
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
|
|
| 1 | 2024-12-03 | mrpt_libtclap |
Mobile Robot Programming Toolkit (MRPT) libraries (tclap C++ library).
This package contains: mrpt-tclap
Mobile Robot Programming Toolkit (MRPT) libraries (tclap C++ library).
This package contains: mrpt-tclap
|
|
| 1 | 2024-12-03 | mrpt_libslam |
Mobile Robot Programming Toolkit (MRPT) libraries (slam/vision C++ libraries).
This package contains: mrpt-slam, mrpt-vision
Mobile Robot Programming Toolkit (MRPT) libraries (slam/vision C++ libraries).
This package contains: mrpt-slam, mrpt-vision
|
|
| 1 | 2024-12-03 | mrpt_libros_bridge |
Mobile Robot Programming Toolkit (MRPT) libraries (ros2bridge C++ library).
This package contains: mrpt-ros2bridge
Mobile Robot Programming Toolkit (MRPT) libraries (ros2bridge C++ library).
This package contains: mrpt-ros2bridge
|
|
| 1 | 2024-12-03 | mrpt_libposes |
Mobile Robot Programming Toolkit (MRPT) libraries (poses C++ libraries).
This package contains: mrpt-poses, mrpt-tfest, mrpt-bayes
Mobile Robot Programming Toolkit (MRPT) libraries (poses C++ libraries).
This package contains: mrpt-poses, mrpt-tfest, mrpt-bayes
|
|
| 1 | 2024-12-03 | mrpt_libopengl |
Mobile Robot Programming Toolkit (MRPT) libraries (opengl/img C++ libraries).
This package contains: mrpt-opengl, mrpt-img
Mobile Robot Programming Toolkit (MRPT) libraries (opengl/img C++ libraries).
This package contains: mrpt-opengl, mrpt-img
|
|
| 1 | 2024-12-03 | mrpt_libobs |
Mobile Robot Programming Toolkit (MRPT) libraries (obs C++ libraries).
This package contains: mrpt-obs, mrpt-topography
Mobile Robot Programming Toolkit (MRPT) libraries (obs C++ libraries).
This package contains: mrpt-obs, mrpt-topography
|
|
| 1 | 2024-12-03 | mrpt_libnav |
Mobile Robot Programming Toolkit (MRPT) libraries (nav C++ libraries).
This package contains: mrpt-nav, mrpt-kinematics
Mobile Robot Programming Toolkit (MRPT) libraries (nav C++ libraries).
This package contains: mrpt-nav, mrpt-kinematics
|
|
| 1 | 2024-12-03 | mrpt_libmath |
Mobile Robot Programming Toolkit (MRPT) libraries (math C++ libraries).
This package contains: mrpt-math
Mobile Robot Programming Toolkit (MRPT) libraries (math C++ libraries).
This package contains: mrpt-math
|
|
| 1 | 2024-12-03 | mrpt_libmaps |
Mobile Robot Programming Toolkit (MRPT) libraries (maps C++ libraries).
This package contains: mrpt-maps, mrpt-graphs
Mobile Robot Programming Toolkit (MRPT) libraries (maps C++ libraries).
This package contains: mrpt-maps, mrpt-graphs
|
|
| 1 | 2024-12-03 | mrpt_libhwdrivers |
Mobile Robot Programming Toolkit (MRPT) libraries (hwdrivers C++ libraries).
This package contains: mrpt-hwdrivers, mrpt-comms
Mobile Robot Programming Toolkit (MRPT) libraries (hwdrivers C++ libraries).
This package contains: mrpt-hwdrivers, mrpt-comms
|
|
| 1 | 2024-12-03 | mrpt_libgui |
Mobile Robot Programming Toolkit (MRPT) libraries (GUI C++ libraries).
This package contains: mrpt-gui, nanogui
Mobile Robot Programming Toolkit (MRPT) libraries (GUI C++ libraries).
This package contains: mrpt-gui, nanogui
|
|
| 1 | 2024-12-03 | mrpt_libbase |
Mobile Robot Programming Toolkit (MRPT) libraries (core C++ libraries).
This package contains: mrpt-io, mrpt-serialization, mrpt-random, mrpt-system, mrpt-rtti, mrpt-containers, mrpt-typemeta, mrpt-core, mrpt-random, mrpt-config, mrpt-expr
Mobile Robot Programming Toolkit (MRPT) libraries (core C++ libraries).
This package contains: mrpt-io, mrpt-serialization, mrpt-random, mrpt-system, mrpt-rtti, mrpt-containers, mrpt-typemeta, mrpt-core, mrpt-random, mrpt-config, mrpt-expr
|
|
| 1 | 2024-12-03 | mrpt_libapps |
Mobile Robot Programming Toolkit (MRPT) libraries (apps C++ libraries).
This package contains: mrpt-apps lib, mrpt-graphslam
Mobile Robot Programming Toolkit (MRPT) libraries (apps C++ libraries).
This package contains: mrpt-apps lib, mrpt-graphslam
|
|
| 1 | 2024-12-03 | mrpt_apps |
Mobile Robot Programming Toolkit (MRPT) applications
Mobile Robot Programming Toolkit (MRPT) applications
|
|
| 1 | 2024-12-03 | etsi_its_vam_ts_msgs |
ROS messages for ETSI ITS VAM (TS)
ROS messages for ETSI ITS VAM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_vam_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS VAMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS VAMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_vam_ts_coding |
C++ compatible C source code for ETSI ITS VAMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS VAMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_spatem_ts_msgs |
ROS messages for ETSI ITS SPATEM (TS)
ROS messages for ETSI ITS SPATEM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_spatem_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS SPATEMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS SPATEMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_spatem_ts_coding |
C++ compatible C source code for ETSI ITS SPATEMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS SPATEMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_rviz_plugins |
RViz plugin for ROS 2 messages based on ETSI ITS messages
RViz plugin for ROS 2 messages based on ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_primitives_conversion |
Conversion functions for converting ROS primitives to and from ASN.1-encoded primitives
Conversion functions for converting ROS primitives to and from ASN.1-encoded primitives
|
|
| 1 | 2024-12-03 | etsi_its_msgs_utils |
ROS messages and utility functions for ETSI ITS messages
ROS messages and utility functions for ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_msgs |
ROS messages for ETSI ITS messages
ROS messages for ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_messages |
ROS support for ETSI ITS messages
ROS support for ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_mapem_ts_msgs |
ROS messages for ETSI ITS MAPEM (TS)
ROS messages for ETSI ITS MAPEM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_mapem_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS MAPEMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS MAPEMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_mapem_ts_coding |
C++ compatible C source code for ETSI ITS MAPEMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS MAPEMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_denm_msgs |
ROS messages for ETSI ITS DENM
ROS messages for ETSI ITS DENM
|
|
| 1 | 2024-12-03 | etsi_its_denm_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS DENMs
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS DENMs
|
|
| 1 | 2024-12-03 | etsi_its_denm_coding |
C++ compatible C source code for ETSI ITS DENMs generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS DENMs generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_cpm_ts_msgs |
ROS messages for ETSI ITS CPM (TS)
ROS messages for ETSI ITS CPM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cpm_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CPMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CPMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cpm_ts_coding |
C++ compatible C source code for ETSI ITS CPMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS CPMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_conversion |
Converts ROS messages to and from ASN.1-encoded ETSI ITS messages
Converts ROS messages to and from ASN.1-encoded ETSI ITS messages
|
|
| 1 | 2024-12-03 | etsi_its_coding |
C++ compatible C source code for ETSI ITS messages generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS messages generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_cam_ts_msgs |
ROS messages for ETSI ITS CAM (TS)
ROS messages for ETSI ITS CAM (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cam_ts_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs (TS)
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs (TS)
|
|
| 1 | 2024-12-03 | etsi_its_cam_ts_coding |
C++ compatible C source code for ETSI ITS CAMs (TS) generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS CAMs (TS) generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | etsi_its_cam_msgs |
ROS messages for ETSI ITS CAM
ROS messages for ETSI ITS CAM
|
|
| 1 | 2024-12-03 | etsi_its_cam_conversion |
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs
Conversion functions for converting ROS messages to and from ASN.1-encoded ETSI ITS CAMs
|
|
| 1 | 2024-12-03 | etsi_its_cam_coding |
C++ compatible C source code for ETSI ITS CAMs generated from ASN.1 using asn1c
C++ compatible C source code for ETSI ITS CAMs generated from ASN.1 using asn1c
|
|
| 1 | 2024-12-03 | depthai_ros_msgs |
Package to keep interface independent of the driver
Package to keep interface independent of the driver
|
|
| 1 | 2024-12-03 | depthai_ros_driver |
Depthai ROS Monolithic node.
Depthai ROS Monolithic node.
|
|
| 1 | 2024-12-03 | depthai_filters |
The depthai_filters package
The depthai_filters package
|
|
| 1 | 2024-12-03 | depthai_examples |
The depthai_examples package
The depthai_examples package
|
|
| 1 | 2024-12-03 | depthai_descriptions |
The depthai_descriptions package
The depthai_descriptions package
|
|
| 1 | 2024-12-03 | depthai_bridge |
The depthai_bridge package
The depthai_bridge package
|
|
| 1 | 2024-12-03 | depthai-ros |
The depthai-ros package
The depthai-ros package
|
|
| 1 | 2024-12-02 | tf2_2d |
A set of 2D geometry classes modeled after the 3D geometry classes in tf2.
A set of 2D geometry classes modeled after the 3D geometry classes in tf2.
|
|
| 1 | 2024-12-02 | test_catkin_virtualenv_inherited |
Test to make sure a package inherits it's dependency's dependencies, but is able to override the version.
Test to make sure a package inherits it's dependency's dependencies, but is able to override the version.
|
|
| 1 | 2024-12-02 | test_catkin_virtualenv |
Basic catkin_virtualenv test.
Basic catkin_virtualenv test.
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 1 | 2024-12-02 | gtsam |
gtsam
gtsam
|
|
| 1 | 2024-12-02 | frame_editor |
The frame_editor package
The frame_editor package
|
|
| 1 | 2024-12-02 | catkin_virtualenv |
Bundle python requirements in a catkin package via virtualenv.
Bundle python requirements in a catkin package via virtualenv.
|
|
| 1 | 2024-12-01 | rtabmap |
RTAB-Map's standalone library. RTAB-Map is a RGB-D SLAM approach with real-time constraints.
RTAB-Map's standalone library. RTAB-Map is a RGB-D SLAM approach with real-time constraints.
|
|
| 1 | 2024-11-29 | ess_imu_driver |
ROS package for Epson IMU based on C++ wrapper of Linux C driver
ROS package for Epson IMU based on C++ wrapper of Linux C driver
|
|
| 1 | 2024-11-28 | innopolis_vtol_dynamics |
The innopolis_vtol_dynamics package
The innopolis_vtol_dynamics package
|
|
| 1 | 2024-11-27 | sick_tim |
A ROS driver for the SICK TiM and the SICK MRS 1000 laser scanners.
A ROS driver for the SICK TiM and the SICK MRS 1000 laser scanners.
|
|
| 1 | 2024-11-27 | rm_referee |
A template for ROS packages.
A template for ROS packages.
|
|
| 1 | 2024-11-27 | rm_msgs |
The rm_msgs package provides all the messages for all kind of robot
The rm_msgs package provides all the messages for all kind of robot
|
|
| 1 | 2024-11-27 | rm_hw |
ROS control warped interface for RoboMaster motor and some robot hardware
ROS control warped interface for RoboMaster motor and some robot hardware
|
|
| 1 | 2024-11-27 | rm_gazebo |
A template for ROS packages.
A template for ROS packages.
|
|
| 1 | 2024-11-27 | rm_dbus |
A package that uses dbus to read remote control information
A package that uses dbus to read remote control information
|
|
| 1 | 2024-11-27 | rm_control |
Meta package that contains package of rm_control.
Meta package that contains package of rm_control.
|
|
| 1 | 2024-11-27 | rm_common |
The rm_common package
The rm_common package
|
|
| 1 | 2024-11-26 | foxglove_msgs |
foxglove_msgs provides visualization messages that are supported by Foxglove.
foxglove_msgs provides visualization messages that are supported by Foxglove.
|
|
| 1 | 2024-11-26 | foxglove_bridge |
ROS Foxglove Bridge
ROS Foxglove Bridge
|
|
| 3 | 2024-11-26 | apriltag |
AprilTag detector library
AprilTag detector library
|
|
| 1 | 2024-11-25 | urg_stamped |
Precisely stamped URG driver for ROS
Precisely stamped URG driver for ROS
|
|
| 1 | 2024-11-25 | ur_client_library |
Standalone C++ library for accessing Universal Robots interfaces. This has been forked off the ur_robot_driver.
Standalone C++ library for accessing Universal Robots interfaces. This has been forked off the ur_robot_driver.
|
|
| 2 | 2024-11-25 | rosparam_shortcuts |
Quickly load variables from rosparam with good command line error checking.
Quickly load variables from rosparam with good command line error checking.
|
|
| 1 | 2024-11-25 | fuse_viz |
The fuse_viz package provides visualization tools for fuse.
The fuse_viz package provides visualization tools for fuse.
|
|
| 1 | 2024-11-25 | fuse_variables |
The fuse_variables package provides a set of commonly used variable types, such as 2D and 3D positions,
orientations, velocities, and accelerations.
The fuse_variables package provides a set of commonly used variable types, such as 2D and 3D positions,
orientations, velocities, and accelerations.
|
|
| 1 | 2024-11-25 | fuse_tutorials |
Package containing source code for the fuse tutorials
Package containing source code for the fuse tutorials
|
|
| 1 | 2024-11-25 | fuse_publishers |
The fuse_publishers package provides a set of common publisher plugins.
The fuse_publishers package provides a set of common publisher plugins.
|
|
| 1 | 2024-11-25 | fuse_optimizers |
The fuse_optimizers package provides a set of optimizer implementations. An optimizer is the object responsible
for coordinating the sensors and motion model inputs, computing the optimal state values, and providing access to
to the optimal state via the publishers.
The fuse_optimizers package provides a set of optimizer implementations. An optimizer is the object responsible
for coordinating the sensors and motion model inputs, computing the optimal state values, and providing access to
to the optimal state via the publishers.
|
|
| 1 | 2024-11-25 | fuse_msgs |
The fuse_msgs package contains messages capable of holding serialized fuse objects
The fuse_msgs package contains messages capable of holding serialized fuse objects
|
|
| 1 | 2024-11-25 | fuse_models |
fuse plugins that implement various kinematic and sensor models
fuse plugins that implement various kinematic and sensor models
|
|
| 1 | 2024-11-25 | fuse_loss |
The fuse_loss package provides a set of commonly used loss functions, such as the basic ones provided by Ceres.
The fuse_loss package provides a set of commonly used loss functions, such as the basic ones provided by Ceres.
|
|
| 1 | 2024-11-25 | fuse_graphs |
The fuse_graphs package provides some concrete implementations of the fuse_core::Graph interface.
The fuse_graphs package provides some concrete implementations of the fuse_core::Graph interface.
|
|
| 1 | 2024-11-25 | fuse_doc |
The fuse_doc package provides documentation and examples for the fuse package.
The fuse_doc package provides documentation and examples for the fuse package.
|
|
| 1 | 2024-11-25 | fuse_core |
The fuse_core package provides the base class interfaces for the various fuse components. Concrete implementations of these
interfaces are provided in other packages.
The fuse_core package provides the base class interfaces for the various fuse components. Concrete implementations of these
interfaces are provided in other packages.
|
|
| 1 | 2024-11-25 | fuse_constraints |
The fuse_constraints package provides a set of commonly used constraint types, such as direct measurements on
state variables (absolute constraints) or measurements of the state changes (relative constraints).
The fuse_constraints package provides a set of commonly used constraint types, such as direct measurements on
state variables (absolute constraints) or measurements of the state changes (relative constraints).
|
|
| 1 | 2024-11-25 | fuse |
The fuse metapackage
The fuse metapackage
|
|
| 1 | 2024-11-25 | behaviortree_cpp |
This package provides the Behavior Trees core library.
This package provides the Behavior Trees core library.
|
|
| 1 | 2024-11-24 | tf_static_publisher |
The tf_static_publisher package provides simple static transform publisher
node which allows to send multiple (latched) static transforms from
single node in single message.
The tf_static_publisher package provides simple static transform publisher
node which allows to send multiple (latched) static transforms from
single node in single message.
|
|
| 1 | 2024-11-24 | plotjuggler |
PlotJuggler: juggle with data
PlotJuggler: juggle with data
|
|
| 1 | 2024-11-24 | image_transport_codecs |
Image transport plugins available as C, C++ and Python libraries
Image transport plugins available as C, C++ and Python libraries
|
|
| 1 | 2024-11-24 | hatchbed_common |
Common Hatchbed C++ utility code for ROS, such registering and handling updates to ros parameters.
Common Hatchbed C++ utility code for ROS, such registering and handling updates to ros parameters.
|
|
| 1 | 2024-11-24 | cras_topic_tools |
Nodes and nodeletes for safe and efficient manipulation with topics
Nodes and nodeletes for safe and efficient manipulation with topics
|
|
| 1 | 2024-11-24 | cras_py_common |
A Czech-army knife for ROS code written in Python.
A Czech-army knife for ROS code written in Python.
|
|
| 1 | 2024-11-24 | cras_docs_common |
Common configuration for CRAS packages documentation.
Common configuration for CRAS packages documentation.
|
|
| 1 | 2024-11-24 | cras_cpp_common |
A Czech-army knife for ROS code written in C++.
A Czech-army knife for ROS code written in C++.
|
|
| 1 | 2024-11-24 | cras_bag_tools |
Various utilities to work with bag files
Various utilities to work with bag files
|
|
| 1 | 2024-11-24 | camera_throttle |
Utilities for throttling cameras
Utilities for throttling cameras
|
|
| 1 | 2024-11-23 | uavcan_communicator |
The uavcan_communicator package
The uavcan_communicator package
|
|
| 1 | 2024-11-23 | tof_radar_controller |
The tof radar controller package
The tof radar controller package
|
|
| 1 | 2024-11-23 | robot_state_controller |
A template for ROS packages.
A template for ROS packages.
|
|
| 1 | 2024-11-23 | rm_shooter_controllers |
RoboMaster standard robot Shooter controller
RoboMaster standard robot Shooter controller
|
|
| 1 | 2024-11-23 | rm_orientation_controller |
RoboMaster standard robot orientation controller
RoboMaster standard robot orientation controller
|
|
| 1 | 2024-11-23 | rm_gimbal_controllers |
RoboMaster standard robot Gimbal controller
RoboMaster standard robot Gimbal controller
|
|
| 1 | 2024-11-23 | rm_controllers |
Meta package that contains package for RoboMaster.
Meta package that contains package for RoboMaster.
|
|
| 1 | 2024-11-23 | rm_chassis_controllers |
RoboMaster standard robot Chassis controller
RoboMaster standard robot Chassis controller
|
|
| 1 | 2024-11-23 | rm_calibration_controllers |
RoboMaster standard robot Gimbal controller
RoboMaster standard robot Gimbal controller
|
|
| 1 | 2024-11-23 | mp2p_icp |
A repertory of multi primitive-to-primitive (MP2P) ICP algorithms in C++
A repertory of multi primitive-to-primitive (MP2P) ICP algorithms in C++
|
|
| 1 | 2024-11-23 | mimic_joint_controller |
The mimic_joint_controller package
The mimic_joint_controller package
|
|
| 1 | 2024-11-23 | magic_enum |
Static reflection for enums (to string, from string, iteration) for modern C++,
work with any enum type without any macro or boilerplate code
Static reflection for enums (to string, from string, iteration) for modern C++,
work with any enum type without any macro or boilerplate code
|
|
| 1 | 2024-11-23 | gpio_controller |
The gpio_controller package
The gpio_controller package
|
|
| 1 | 2024-11-21 | tsid |
Efficient Task Space Inverse Dynamics (TSID) based on Pinocchio
Efficient Task Space Inverse Dynamics (TSID) based on Pinocchio
|
|
| 1 | 2024-11-21 | reach |
The reach package
The reach package
|
|
| 2 | 2024-11-20 | rc_reason_msgs |
Msg and srv definitions for rc_reason_clients
Msg and srv definitions for rc_reason_clients
|
|
| 2 | 2024-11-20 | rc_reason_clients |
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
|
|
| 1 | 2024-11-20 | inorbit_republisher |
ROS to InOrbit topic republisher
ROS to InOrbit topic republisher
|
|
| 2 | 2024-11-19 | sbpl_interface_ros |
sbpl_interface_ros
sbpl_interface_ros
|
|
| 2 | 2024-11-19 | sbpl_interface |
sbpl_interface
sbpl_interface
|
|
| 2 | 2024-11-19 | pilz_industrial_motion_planner_testutils |
Helper scripts and functionality to test industrial motion generation
Helper scripts and functionality to test industrial motion generation
|
|
| 2 | 2024-11-19 | pilz_industrial_motion_planner |
MoveIt plugin to generate industrial trajectories PTP, LIN, CIRC and sequences thereof.
MoveIt plugin to generate industrial trajectories PTP, LIN, CIRC and sequences thereof.
|
|
| 3 | 2024-11-19 | moveit_simple_controller_manager |
A generic, simple controller manager plugin for MoveIt.
A generic, simple controller manager plugin for MoveIt.
|
|
| 3 | 2024-11-19 | moveit_setup_assistant |
Generates a configuration package that makes it easy to use MoveIt
Generates a configuration package that makes it easy to use MoveIt
|
|
| 2 | 2024-11-19 | moveit_servo |
Provides real-time manipulator Cartesian and joint servoing.
Provides real-time manipulator Cartesian and joint servoing.
|
|
| 2 | 2024-11-19 | moveit_runtime |
moveit_runtime meta package contains MoveIt packages that are essential for its runtime (e.g. running MoveIt on robots).
moveit_runtime meta package contains MoveIt packages that are essential for its runtime (e.g. running MoveIt on robots).
|
|
| 3 | 2024-11-19 | moveit_ros_warehouse |
Components of MoveIt connecting to MongoDB
Components of MoveIt connecting to MongoDB
|
|
| 3 | 2024-11-19 | moveit_ros_visualization |
Components of MoveIt that offer visualization
Components of MoveIt that offer visualization
|
|
| 3 | 2024-11-19 | moveit_ros_robot_interaction |
Components of MoveIt that offer interaction via interactive markers
Components of MoveIt that offer interaction via interactive markers
|
|
| 3 | 2024-11-19 | moveit_ros_planning_interface |
Components of MoveIt that offer simpler interfaces to planning and execution
Components of MoveIt that offer simpler interfaces to planning and execution
|
|
| 3 | 2024-11-19 | moveit_ros_planning |
Planning components of MoveIt that use ROS
Planning components of MoveIt that use ROS
|
|
| 3 | 2024-11-19 | moveit_ros_perception |
Components of MoveIt connecting to perception
Components of MoveIt connecting to perception
|
|
| 2 | 2024-11-19 | moveit_ros_occupancy_map_monitor |
Components of MoveIt connecting to occupancy map
Components of MoveIt connecting to occupancy map
|
|
| 3 | 2024-11-19 | moveit_ros_move_group |
The move_group node for MoveIt
The move_group node for MoveIt
|
|
| 2 | 2024-11-19 | moveit_ros_manipulation |
Components of MoveIt used for manipulation
Components of MoveIt used for manipulation
|
|
| 2 | 2024-11-19 | moveit_ros_control_interface |
ros_control controller manager interface for MoveIt
ros_control controller manager interface for MoveIt
|
|
| 3 | 2024-11-19 | moveit_ros_benchmarks |
Enhanced tools for benchmarks in MoveIt
Enhanced tools for benchmarks in MoveIt
|
|
| 3 | 2024-11-19 | moveit_ros |
Components of MoveIt that use ROS
Components of MoveIt that use ROS
|
|
| 3 | 2024-11-19 | moveit_plugins |
Metapackage for MoveIt plugins.
Metapackage for MoveIt plugins.
|
|
| 3 | 2024-11-19 | moveit_planners_ompl |
MoveIt interface to OMPL
MoveIt interface to OMPL
|
|
| 2 | 2024-11-19 | moveit_planners_chomp |
The interface for using CHOMP within MoveIt
The interface for using CHOMP within MoveIt
|
|
| 3 | 2024-11-19 | moveit_planners |
Metapacakge that installs all available planners for MoveIt
Metapacakge that installs all available planners for MoveIt
|
|
| 2 | 2024-11-19 | moveit_kinematics |
Package for all inverse kinematics solvers in MoveIt
Package for all inverse kinematics solvers in MoveIt
|
|
| 2 | 2024-11-19 | moveit_fake_controller_manager |
A fake controller manager plugin for MoveIt.
A fake controller manager plugin for MoveIt.
|
|
| 3 | 2024-11-19 | moveit_core |
Core libraries used by MoveIt
Core libraries used by MoveIt
|
|
| 2 | 2024-11-19 | moveit_commander |
Python interfaces to MoveIt
Python interfaces to MoveIt
|
|
| 1 | 2024-11-19 | moveit_chomp_optimizer_adapter |
MoveIt planning request adapter utilizing chomp for solution optimization
MoveIt planning request adapter utilizing chomp for solution optimization
|
|
| 2 | 2024-11-19 | moveit |
Meta package that contains all essential package of MoveIt. Until Summer 2016 MoveIt had been developed over multiple repositories, where developers' usability and maintenance effort was non-trivial. See
Meta package that contains all essential package of MoveIt. Until Summer 2016 MoveIt had been developed over multiple repositories, where developers' usability and maintenance effort was non-trivial. See
|
|
| 1 | 2024-11-19 | fields2cover |
Robust and efficient coverage paths for autonomous agricultural vehicles.
A modular and extensible Coverage Path Planning library
Robust and efficient coverage paths for autonomous agricultural vehicles.
A modular and extensible Coverage Path Planning library
|
|
| 3 | 2024-11-19 | chomp_motion_planner |
chomp_motion_planner
chomp_motion_planner
|
|
| 1 | 2024-11-18 | vizanti |
A mission planner and visualizer for controlling outdoor ROS robots.
A mission planner and visualizer for controlling outdoor ROS robots.
|
|
| 1 | 2024-11-18 | multisense_ros |
multisense_ros
multisense_ros
|
|
| 1 | 2024-11-18 | multisense_lib |
multisense_lib
multisense_lib
|
|
| 1 | 2024-11-18 | multisense_description |
multisense_description
multisense_description
|
|
| 1 | 2024-11-18 | multisense_cal_check |
multisense_cal_check
multisense_cal_check
|
|
| 1 | 2024-11-18 | multisense_bringup |
multisense_bringup
multisense_bringup
|
|
| 1 | 2024-11-18 | multisense |
multisense catkin driver
multisense catkin driver
|
|
| 2 | 2024-11-18 | end_effector |
End-Effector package: provides a ROS-based set of standard interfaces to command robotics end-effectors in an agnostic fashion
End-Effector package: provides a ROS-based set of standard interfaces to command robotics end-effectors in an agnostic fashion
|
|
| 1 | 2024-11-16 | gazebo_noisy_depth_camera |
Gazebo depth camera which supports noise
Gazebo depth camera which supports noise
|
|
| 1 | 2024-11-15 | nicla_vision_ros |
Integration of the Arduino Nicla Vision board in the ROS world.
Sensors data from the Nicla Vision is collected and trasmited to the relevant ROS topics
Integration of the Arduino Nicla Vision board in the ROS world.
Sensors data from the Nicla Vision is collected and trasmited to the relevant ROS topics
|
|
| 1 | 2024-11-15 | mocap_nokov |
Streaming of Nokov mocap data to tf
Streaming of Nokov mocap data to tf
|
|
| 1 | 2024-11-15 | hector_xacro_tools |
hector_xacro_tools
hector_xacro_tools
|
|
| 1 | 2024-11-15 | hector_sensors_description |
hector_sensors_description contains URDF xacro macros for sensors, so they are easily attachable to robot models and usable in gazebo.
hector_sensors_description contains URDF xacro macros for sensors, so they are easily attachable to robot models and usable in gazebo.
|
|
| 1 | 2024-11-15 | hector_models |
hector_models contains (urdf) models of robots, sensors etc.
hector_models contains (urdf) models of robots, sensors etc.
|
|
| 1 | 2024-11-15 | hector_components_description |
hector_components_description contains URDF xacro macros for robot components, so they are easily attachable to robot models.
hector_components_description contains URDF xacro macros for robot components, so they are easily attachable to robot models.
|
|
| 1 | 2024-11-13 | test_nodelet_topic_tools |
A package for nodelet_topic_tools unit tests.
A package for nodelet_topic_tools unit tests.
|
|
| 1 | 2024-11-13 | test_nodelet |
A package for nodelet unit tests
A package for nodelet unit tests
|
|
| 1 | 2024-11-13 | nodelet_topic_tools |
This package contains common nodelet tools such as a mux, demux and throttle.
This package contains common nodelet tools such as a mux, demux and throttle.
|
|
| 1 | 2024-11-13 | nodelet_core |
Nodelet Core Metapackage
Nodelet Core Metapackage
|
|
| 1 | 2024-11-13 | nodelet |
The nodelet package is designed to provide a way to run multiple
algorithms in the same process with zero copy transport between
algorithms.
This package provides both the nodelet base class needed for
implementing a nodelet, as well as the NodeletLoader class used
for instantiating nodelets.
The nodelet package is designed to provide a way to run multiple
algorithms in the same process with zero copy transport between
algorithms.
This package provides both the nodelet base class needed for
implementing a nodelet, as well as the NodeletLoader class used
for instantiating nodelets.
|
|
| 1 | 2024-11-13 | hector_trajectory_server |
hector_trajectory_server keeps track of tf trajectories extracted from tf data and makes this data accessible via a service and topic.
hector_trajectory_server keeps track of tf trajectories extracted from tf data and makes this data accessible via a service and topic.
|
|
| 1 | 2024-11-13 | hector_slam_launch |
hector_slam_launch contains launch files for launching hector_slam with different robot systems/setups/postprocessing scenarios.
hector_slam_launch contains launch files for launching hector_slam with different robot systems/setups/postprocessing scenarios.
|
|
| 1 | 2024-11-13 | hector_slam |
The hector_slam metapackage that installs hector_mapping and related packages.
The hector_slam metapackage that installs hector_mapping and related packages.
|
|
| 1 | 2024-11-13 | hector_nav_msgs |
hector_nav_msgs contains messages and services used in the hector_slam stack.
hector_nav_msgs contains messages and services used in the hector_slam stack.
|
|
| 1 | 2024-11-13 | hector_marker_drawing |
hector_marker_drawing provides convenience functions for easier publishing of visualization markers.
hector_marker_drawing provides convenience functions for easier publishing of visualization markers.
|
|
| 1 | 2024-11-13 | hector_mapping |
hector_mapping is a SLAM approach that can be used without odometry as well as on platforms that exhibit roll/pitch motion (of the sensor, the platform or both).
It leverages the high update rate of modern LIDAR systems like the Hokuyo UTM-30LX and provides 2D pose estimates at scan rate of the sensors (40Hz for the UTM-30LX).
While the system does not provide explicit loop closing ability, it is sufficiently accurate for many real world scenarios. The system has successfully been used on
Unmanned Ground Robots, Unmanned Surface Vehicles, Handheld Mapping Devices and logged data from quadrotor UAVs.
hector_mapping is a SLAM approach that can be used without odometry as well as on platforms that exhibit roll/pitch motion (of the sensor, the platform or both).
It leverages the high update rate of modern LIDAR systems like the Hokuyo UTM-30LX and provides 2D pose estimates at scan rate of the sensors (40Hz for the UTM-30LX).
While the system does not provide explicit loop closing ability, it is sufficiently accurate for many real world scenarios. The system has successfully been used on
Unmanned Ground Robots, Unmanned Surface Vehicles, Handheld Mapping Devices and logged data from quadrotor UAVs.
|
|
| 1 | 2024-11-13 | hector_map_tools |
hector_map_tools contains some functions related to accessing information from OccupancyGridMap maps.
Currently consists of a single header.
hector_map_tools contains some functions related to accessing information from OccupancyGridMap maps.
Currently consists of a single header.
|
|
| 1 | 2024-11-13 | hector_map_server |
hector_map_server provides a service for retrieving the map, as well as for raycasting based obstacle queries (finds next obstacle in the map, given start and endpoint
in any tf coordinate frame).
hector_map_server provides a service for retrieving the map, as well as for raycasting based obstacle queries (finds next obstacle in the map, given start and endpoint
in any tf coordinate frame).
|
|
| 1 | 2024-11-13 | hector_imu_tools |
hector_imu_tools provides some tools for processing IMU messages
hector_imu_tools provides some tools for processing IMU messages
|
|
| 1 | 2024-11-13 | hector_imu_attitude_to_tf |
hector_imu_attitude_to_tf is a lightweight node that can be used to publish the roll/pitch attitude angles reported via a imu message to tf.
hector_imu_attitude_to_tf is a lightweight node that can be used to publish the roll/pitch attitude angles reported via a imu message to tf.
|
|
| 1 | 2024-11-13 | hector_geotiff_plugins |
hector_geotiff_plugins contains plugins that extend geotiff maps generated by hector_geotiff.
hector_geotiff_plugins contains plugins that extend geotiff maps generated by hector_geotiff.
|
|
| 1 | 2024-11-13 | hector_geotiff_launch |
Contains launch files for the hector_geotiff mapper.
Contains launch files for the hector_geotiff mapper.
|
|
| 1 | 2024-11-13 | hector_geotiff |
hector_geotiff provides a node that can be used to save occupancy grid map, robot trajectory and object of interest data to RoboCup Rescue compliant GeoTiff images.
hector_geotiff provides a node that can be used to save occupancy grid map, robot trajectory and object of interest data to RoboCup Rescue compliant GeoTiff images.
|
|
| 1 | 2024-11-13 | hector_compressed_map_transport |
hector_compressed_map_transport provides means for transporting compressed map data through the use of image_transport.
hector_compressed_map_transport provides means for transporting compressed map data through the use of image_transport.
|
|
| 1 | 2024-11-12 | virtual_force_publisher |
publish end effector's force, which is estmated from joint torque value
publish end effector's force, which is estmated from joint torque value
|
|
| 2 | 2024-11-12 | sdc21x0 |
Message definitions for the sdc21x0 motor controller
Message definitions for the sdc21x0 motor controller
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 1 | 2024-12-03 | osrf_pycommon |
Commonly needed Python modules, used by Python software developed at OSRF.
Commonly needed Python modules, used by Python software developed at OSRF.
|
|
| 1 | 2024-11-29 | fastcdr |
*eProsima Fast CDR* is a C++ serialization library implementing the Common Data Representation (CDR) mechanism defined by the Object Management Group (OMG) consortium. CDR is the serialization mechanism used in DDS for the DDS Interoperability Wire Protocol (DDSI-RTPS).
*eProsima Fast CDR* is a C++ serialization library implementing the Common Data Representation (CDR) mechanism defined by the Object Management Group (OMG) consortium. CDR is the serialization mechanism used in DDS for the DDS Interoperability Wire Protocol (DDSI-RTPS).
|
|
| 2 | 2024-07-23 | vision_msgs_rviz_plugins |
RVIZ2 plugins for visualizing vision_msgs
RVIZ2 plugins for visualizing vision_msgs
|
|
| 2 | 2024-07-23 | vision_msgs |
Messages for interfacing with various computer vision pipelines, such as
object detectors.
Messages for interfacing with various computer vision pipelines, such as
object detectors.
|
|
| 2 | 2020-10-29 | urdfdom |
A library to access URDFs using the DOM model.
A library to access URDFs using the DOM model.
|
|
| 1 | 2018-10-19 | pluginlib |
The pluginlib package provides tools for writing and dynamically loading plugins using the ROS build infrastructure.
To work, these tools require plugin providers to register their plugins in the package.xml of their package.
The pluginlib package provides tools for writing and dynamically loading plugins using the ROS build infrastructure.
To work, these tools require plugin providers to register their plugins in the package.xml of their package.
|
|
| 1 | 2018-10-19 | class_loader |
The class_loader package is a ROS-independent package for loading plugins during runtime and the foundation of the higher level ROS "pluginlib" library.
class_loader utilizes the host operating system's runtime loader to open runtime libraries (e.g. .so/.dll files), introspect the library for exported plugin classes, and allows users to instantiate objects of these exported classes without the explicit declaration (i.e. header file) for those classes.
The class_loader package is a ROS-independent package for loading plugins during runtime and the foundation of the higher level ROS "pluginlib" library.
class_loader utilizes the host operating system's runtime loader to open runtime libraries (e.g. .so/.dll files), introspect the library for exported plugin classes, and allows users to instantiate objects of these exported classes without the explicit declaration (i.e. header file) for those classes.
|
|
| 1 | 2018-07-21 | turtlebot2_teleop |
Launch files for turtlebot2 teleop demo
Launch files for turtlebot2 teleop demo
|
|
| 1 | 2018-07-21 | turtlebot2_follower |
A simple follower using centroid in depth images.
A simple follower using centroid in depth images.
|
|
| 1 | 2018-07-21 | turtlebot2_drivers |
Set of drivers to talk to the kobuki base.
Set of drivers to talk to the kobuki base.
|
|
| 1 | 2018-07-21 | turtlebot2_demo |
Metapackage aggregating the turtlebot2 demo packages
Metapackage aggregating the turtlebot2 demo packages
|
|
| 1 | 2018-07-21 | turtlebot2_cartographer |
Launch files for turtlebot2 cartographer demo
Launch files for turtlebot2 cartographer demo
|
|
| 1 | 2018-07-21 | turtlebot2_amcl |
Demo of turtlebot2 localization with amcl.
Demo of turtlebot2 localization with amcl.
|
|
| 1 | 2018-07-21 | depthimage_to_pointcloud2 |
A simple node to convert a depth image and camera info into a PointCloud2.
A simple node to convert a depth image and camera info into a PointCloud2.
|
|
| 2 | 2018-07-20 | ros_core |
A package to aggregate the packages required to use publish / subscribe, services, generate messages and other core ROS concepts.
A package to aggregate the packages required to use publish / subscribe, services, generate messages and other core ROS concepts.
|
|
| 2 | 2018-07-20 | ros_base |
A package which extends 'ros_core' and includes other basic functionalities like tf2 and urdf.
A package which extends 'ros_core' and includes other basic functionalities like tf2 and urdf.
|
|
| 2 | 2018-07-20 | desktop |
A package which extends 'ros_base' and includes high level packages like vizualization tools and demos.
A package which extends 'ros_base' and includes high level packages like vizualization tools and demos.
|
|
| 1 | 2018-03-28 | ros2topic |
The topic command for ROS 2 command line tools.
The topic command for ROS 2 command line tools.
|
|
| 1 | 2018-03-28 | ros2srv |
The srv command for ROS 2 command line tools.
The srv command for ROS 2 command line tools.
|
|
| 1 | 2018-03-28 | ros2service |
The service command for ROS 2 command line tools.
The service command for ROS 2 command line tools.
|
|
| 1 | 2018-03-28 | ros2run |
The run command for ROS 2 command line tools.
The run command for ROS 2 command line tools.
|
|
| 1 | 2018-03-28 | ros2pkg |
The pkg command for ROS 2 command line tools.
The pkg command for ROS 2 command line tools.
|
|
| 1 | 2018-03-28 | ros2node |
The node command for ROS 2 command line tools.
The node command for ROS 2 command line tools.
|
|
| 1 | 2018-03-28 | ros2msg |
The msg command for ROS 2 command line tools.
The msg command for ROS 2 command line tools.
|
|
| 1 | 2018-03-28 | ros2cli |
Framework for ROS 2 command line tools.
Framework for ROS 2 command line tools.
|
|
| 1 | 2018-03-13 | ecl_tools |
Tools and utilities for ecl development.
Tools and utilities for ecl development.
|
|
| 1 | 2018-03-13 | ecl_license |
Maintains the ecl licenses and also provides an install
target for deploying licenses with the ecl libraries.
Maintains the ecl licenses and also provides an install
target for deploying licenses with the ecl libraries.
|
|
| 1 | 2018-03-13 | ecl_build |
Collection of cmake/make build tools primarily for ecl development itself, but also
contains a few cmake modules useful outside of the ecl.
Collection of cmake/make build tools primarily for ecl development itself, but also
contains a few cmake modules useful outside of the ecl.
|
|
| 1 | 2018-03-07 | sros2 |
Command line tools for managing SROS2 keys
Command line tools for managing SROS2 keys
|
|
| 1 | 2018-02-08 | rviz_yaml_cpp_vendor |
Wrapper around yaml-cpp, it provides a fixed CMake module and an ExternalProject build of it.
Wrapper around yaml-cpp, it provides a fixed CMake module and an ExternalProject build of it.
|
|
| 1 | 2018-02-08 | rviz_rendering_tests |
Example plugin for RViz - documents and tests RViz plugin development
Example plugin for RViz - documents and tests RViz plugin development
|
|
| 1 | 2018-02-08 | rviz_rendering |
Library which provides the 3D rendering functionality in rviz.
Library which provides the 3D rendering functionality in rviz.
|
|
| 1 | 2018-02-08 | rviz_ogre_vendor |
Wrapper around ogre3d, it provides a fixed CMake module and an ExternalProject build of ogre.
Wrapper around ogre3d, it provides a fixed CMake module and an ExternalProject build of ogre.
|
|
| 1 | 2018-02-08 | rviz_default_plugins |
Several default plugins for rviz to cover the basic functionality.
Several default plugins for rviz to cover the basic functionality.
|
|
| 1 | 2018-02-08 | rviz_common |
Common rviz API, used by rviz plugins and applications.
Common rviz API, used by rviz plugins and applications.
|
|
| 1 | 2018-02-08 | rviz_assimp_vendor |
Wrapper around assimp, providing nothing but a dependency on assimp, on some systems.
On others, it provides a fixed CMake module or even an ExternalProject build of assimp.
Wrapper around assimp, providing nothing but a dependency on assimp, on some systems.
On others, it provides a fixed CMake module or even an ExternalProject build of assimp.
|
|
| 1 | 2018-02-08 | rviz2 |
3D visualization tool for ROS.
3D visualization tool for ROS.
|
|
| 2 | 2018-02-08 | resource_retriever |
This package retrieves data from url-format files such as http://,
ftp://, package:// file://, etc., and loads the data into memory.
The package:// url for ros packages is translated into a local
file:// url. The resourse retriever was initially designed to load
mesh files into memory, but it can be used for any type of
data. The resource retriever is based on the the libcurl library.
This package retrieves data from url-format files such as http://,
ftp://, package:// file://, etc., and loads the data into memory.
The package:// url for ros packages is translated into a local
file:// url. The resourse retriever was initially designed to load
mesh files into memory, but it can be used for any type of
data. The resource retriever is based on the the libcurl library.
|
|
| 1 | 2018-02-08 | libcurl_vendor |
Wrapper around libcurl, it provides a fixed CMake module and an ExternalProject build of it.
Wrapper around libcurl, it provides a fixed CMake module and an ExternalProject build of it.
|
|
| 1 | 2018-02-07 | rosidl_typesupport_introspection_cpp |
Generate the message type support for dynamic message construction in C++.
Generate the message type support for dynamic message construction in C++.
|
|
| 1 | 2018-02-07 | rosidl_typesupport_introspection_c |
Generate the message type support for dynamic message construction in C.
Generate the message type support for dynamic message construction in C.
|
|
| 1 | 2018-02-07 | rosidl_typesupport_interface |
The interface for rosidl typesupport packages.
The interface for rosidl typesupport packages.
|
|
| 1 | 2018-02-07 | rosidl_parser |
The parser for ROS interface files.
The parser for ROS interface files.
|
|
| 2 | 2018-02-07 | rosidl_generator_py |
Generate the ROS interfaces in Python.
Generate the ROS interfaces in Python.
|
|
| 1 | 2018-02-07 | rosidl_generator_cpp |
Generate the ROS interfaces in C++.
Generate the ROS interfaces in C++.
|
|
| 1 | 2018-02-07 | rosidl_generator_c |
Generate the ROS interfaces in C.
Generate the ROS interfaces in C.
|
|
| 1 | 2018-02-07 | rosidl_cmake |
The CMake functionality to invoke code generation for ROS interface files.
The CMake functionality to invoke code generation for ROS interface files.
|
|
| 3 | 2018-02-07 | python_cmake_module |
Provide CMake module with extra functionality for Python.
Provide CMake module with extra functionality for Python.
|
|
| 1 | 2018-01-26 | ros_environment |
The package provides the environment variables `ROS_VERSION` and `ROS_DISTRO`.
The package provides the environment variables `ROS_VERSION` and `ROS_DISTRO`.
|
|
| 2 | 2017-12-09 | visualization_msgs |
A package containing some visualization and interaction related message definitions.
A package containing some visualization and interaction related message definitions.
|
|
| 3 | 2017-12-09 | urdf |
This package contains a C++ parser for the Unified Robot Description
Format (URDF), which is an XML format for representing a robot model.
The code API of the parser has been through our review process and will remain
backwards compatible in future releases.
This package contains a C++ parser for the Unified Robot Description
Format (URDF), which is an XML format for representing a robot model.
The code API of the parser has been through our review process and will remain
backwards compatible in future releases.
|
|
| 2 | 2017-12-09 | trajectory_msgs |
A package containing some robot trajectory message definitions.
A package containing some robot trajectory message definitions.
|
|
| 1 | 2017-12-09 | topic_monitor |
Package containing tools for monitoring ROS 2 topics.
Package containing tools for monitoring ROS 2 topics.
|
|
| 1 | 2017-12-09 | tlsf_cpp |
C++ stdlib-compatible wrapper around tlsf allocator and ROS2 examples
C++ stdlib-compatible wrapper around tlsf allocator and ROS2 examples
|
|
| 1 | 2017-12-09 | tlsf |
TLSF allocator version 2.4.6
TLSF allocator version 2.4.6
|
|
| 1 | 2017-12-09 | tinyxml2_vendor |
Wrapper around tinyxml2, providing nothing but a dependency on tinyxml2, on some systems.
On others, it provides a fixed CMake module or even an ExternalProject build of tinyxml2.
Wrapper around tinyxml2, providing nothing but a dependency on tinyxml2, on some systems.
On others, it provides a fixed CMake module or even an ExternalProject build of tinyxml2.
|
|
| 3 | 2017-12-09 | tf2_ros |
This package contains the ROS bindings for the tf2 library, for both Python and C++.
This package contains the ROS bindings for the tf2 library, for both Python and C++.
|
|
| 3 | 2017-12-09 | tf2_msgs |
tf2_msgs
tf2_msgs
|
|
| 3 | 2017-12-09 | tf2_geometry_msgs |
tf2_geometry_msgs
tf2_geometry_msgs
|
|
| 3 | 2017-12-09 | tf2_eigen |
tf2_eigen
tf2_eigen
|
|
| 3 | 2017-12-09 | tf2 |
tf2 is the second generation of the transform library, which lets
the user keep track of multiple coordinate frames over time. tf2
maintains the relationship between coordinate frames in a tree
structure buffered in time, and lets the user transform points,
vectors, etc between any two coordinate frames at any desired
point in time.
tf2 is the second generation of the transform library, which lets
the user keep track of multiple coordinate frames over time. tf2
maintains the relationship between coordinate frames in a tree
structure buffered in time, and lets the user transform points,
vectors, etc between any two coordinate frames at any desired
point in time.
|
|
| 1 | 2017-12-09 | test_msgs |
A package containing message definitions and fixtures used exclusively for testing purposes.
A package containing message definitions and fixtures used exclusively for testing purposes.
|
|
| 2 | 2017-12-09 | teleop_twist_keyboard |
A robot-agnostic teleoperation node to convert keyboard commands to Twist
messages.
A robot-agnostic teleoperation node to convert keyboard commands to Twist
messages.
|
|
| 2 | 2017-12-09 | teleop_twist_joy |
Generic joystick teleop for twist robots.
Generic joystick teleop for twist robots.
|
|
| 2 | 2017-12-09 | stereo_msgs |
A package containing some stereo camera related message definitions.
A package containing some stereo camera related message definitions.
|
|
| 3 | 2017-12-09 | std_srvs |
A package containing some standard service definitions.
A package containing some standard service definitions.
|
|
| 2 | 2017-12-09 | std_msgs |
A package containing some standard message definitions.
A package containing some standard message definitions.
|
|
| 2 | 2017-12-09 | shape_msgs |
A package containing some message definitions which describe geometric shapes.
A package containing some message definitions which describe geometric shapes.
|
|
| 2 | 2017-12-09 | sensor_msgs |
A package containing some sensor data related message and service definitions.
A package containing some sensor data related message and service definitions.
|
|
| 1 | 2017-12-09 | rttest |
Instrumentation library for real-time performance testing
Instrumentation library for real-time performance testing
|
|
| 2 | 2017-12-09 | rosidl_typesupport_opensplice_cpp |
Generate the C++ interfaces for PrismTech OpenSplice.
Generate the C++ interfaces for PrismTech OpenSplice.
|
|
| 2 | 2017-12-09 | rosidl_typesupport_opensplice_c |
Generate the C interfaces for PrismTech OpenSplice.
Generate the C interfaces for PrismTech OpenSplice.
|
|
| 1 | 2017-12-09 | rosidl_typesupport_cpp |
Generate the type support for C++ messages.
Generate the type support for C++ messages.
|
|
| 1 | 2017-12-09 | rosidl_typesupport_c |
Generate the type support for C messages.
Generate the type support for C messages.
|
|
| 1 | 2017-12-09 | rosidl_generator_dds_idl |
Generate the DDS interfaces for ROS interfaces.
Generate the DDS interfaces for ROS interfaces.
|
|
| 2 | 2017-12-09 | rosidl_default_runtime |
A configuration package defining the runtime for the ROS interfaces.
A configuration package defining the runtime for the ROS interfaces.
|
|
| 2 | 2017-12-09 | rosidl_default_generators |
A configuration package defining the default ROS interface generators.
A configuration package defining the default ROS interface generators.
|
|
| 1 | 2017-12-09 | ros_workspace |
Provides the prefix level environment files for ROS 2 packages.
Provides the prefix level environment files for ROS 2 packages.
|
|
| 1 | 2017-12-09 | ros1_bridge |
A simple bridge between ROS 1 and ROS 2
A simple bridge between ROS 1 and ROS 2
|
|
| 2 | 2017-12-09 | robot_state_publisher |
ROS2 version of the robot_state_publisher package
ROS2 version of the robot_state_publisher package
|
|
| 1 | 2017-12-09 | rmw_opensplice_cpp |
Implement the ROS middleware interface using PrismTech OpenSplice static code generation in C++.
Implement the ROS middleware interface using PrismTech OpenSplice static code generation in C++.
|
|
| 1 | 2017-12-09 | rmw_implementation_cmake |
CMake functions which can discover and enumerate available implementations.
CMake functions which can discover and enumerate available implementations.
|
|
| 1 | 2017-12-09 | rmw_implementation |
The decision which ROS middleware implementation should be used for C++.
The decision which ROS middleware implementation should be used for C++.
|
|
| 1 | 2017-12-09 | rmw_fastrtps_cpp |
Implement the ROS middleware interface using eProsima FastRTPS static code generation in C++.
Implement the ROS middleware interface using eProsima FastRTPS static code generation in C++.
|
|
| 1 | 2017-12-09 | rmw |
Contains the ROS middleware API.
Contains the ROS middleware API.
|
|
| 1 | 2017-12-09 | rcutils |
Package containing various utility types and functions for C
Package containing various utility types and functions for C
|
|
| 1 | 2017-12-09 | rclpy |
Package containing the Python client.
Package containing the Python client.
|
|
| 1 | 2017-12-09 | rclcpp_lifecycle |
Package containing a prototype for lifecycle implementation
Package containing a prototype for lifecycle implementation
|
|
| 1 | 2017-12-09 | rclcpp |
The ROS client library in C++.
The ROS client library in C++.
|
|
| 1 | 2017-12-09 | rcl_lifecycle |
Package containing a C-based lifecycle implementation
Package containing a C-based lifecycle implementation
|
|
| 1 | 2017-12-09 | rcl_interfaces |
The ROS client library common interfaces.
This package contains the messages and services which ROS client libraries will use under the hood to
communicate higher level concepts such as parameters.
The ROS client library common interfaces.
This package contains the messages and services which ROS client libraries will use under the hood to
communicate higher level concepts such as parameters.
|
|
| 1 | 2017-12-09 | rcl |
The ROS client library common implementation.
This package contains an API which builds on the ROS middleware API and is optionally built upon by the other ROS client libraries.
The ROS client library common implementation.
This package contains an API which builds on the ROS middleware API and is optionally built upon by the other ROS client libraries.
|
|
| 1 | 2017-12-09 | pendulum_msgs |
Custom messages for real-time pendulum control.
Custom messages for real-time pendulum control.
|
|
| 1 | 2017-12-09 | pendulum_control |
Demonstrates ROS 2's realtime capabilities with a simulated inverted pendulum.
Demonstrates ROS 2's realtime capabilities with a simulated inverted pendulum.
|
|
| 3 | 2017-12-09 | pcl_conversions |
Provides conversions from PCL data types and ROS message types
Provides conversions from PCL data types and ROS message types
|
|
| 3 | 2017-12-09 | orocos_kdl |
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 2 | 2017-12-09 | opensplice_cmake_module |
Provide CMake module to find PrismTech OpenSplice.
Provide CMake module to find PrismTech OpenSplice.
|
|
| 2 | 2017-12-09 | nav_msgs |
A package containing some navigation related message and service definitions.
A package containing some navigation related message and service definitions.
|
|
| 2 | 2017-12-09 | map_server |
map_server provides the
map_server provides the
|
|
| 1 | 2017-12-09 | logging_demo |
Examples for using and configuring loggers.
Examples for using and configuring loggers.
|
|
| 1 | 2017-12-09 | lifecycle_msgs |
A package containing some lifecycle related message and service definitions.
A package containing some lifecycle related message and service definitions.
|
|
| 1 | 2017-12-09 | lifecycle |
Package containing demos for lifecycle implementation
Package containing demos for lifecycle implementation
|
|
| 1 | 2017-12-09 | launch_testing |
Helper scripts for tests that use the ROS launch tool.
Helper scripts for tests that use the ROS launch tool.
|
|
| 1 | 2017-12-09 | launch |
The ROS launch tool.
The ROS launch tool.
|
|
| 2 | 2017-12-09 | kdl_parser |
The Kinematics and Dynamics Library (KDL) defines a tree structure
to represent the kinematic and dynamic parameters of a robot
mechanism.
The Kinematics and Dynamics Library (KDL) defines a tree structure
to represent the kinematic and dynamic parameters of a robot
mechanism.
|
|
| 2 | 2017-12-09 | joy |
ROS2 driver for a generic Linux joystick.
Will contain a MacOS and Windows version later.
The joy package contains joy_node, a node that interfaces a
generic Linux joystick to ROS2. This node publishes a "Joy"
message, which contains the current state of each one of the
joystick's buttons and axes.
ROS2 driver for a generic Linux joystick.
Will contain a MacOS and Windows version later.
The joy package contains joy_node, a node that interfaces a
generic Linux joystick to ROS2. This node publishes a "Joy"
message, which contains the current state of each one of the
joystick's buttons and axes.
|
|
| 1 | 2017-12-09 | intra_process_demo |
Demonstrations of intra process communication.
Demonstrations of intra process communication.
|
|
| 1 | 2017-12-09 | image_tools |
Tools to capture and play back images to and from DDS subscriptions and publications.
Tools to capture and play back images to and from DDS subscriptions and publications.
|
|
| 2 | 2017-12-09 | geometry_msgs |
A package containing some geometry related message definitions.
A package containing some geometry related message definitions.
|
|
| 2 | 2017-12-09 | fastrtps_cmake_module |
Provide CMake module to find eProsima FastRTPS.
Provide CMake module to find eProsima FastRTPS.
|
|
| 1 | 2017-12-09 | examples_rclpy_minimal_subscriber |
Examples of minimal subscribers using rclpy.
Examples of minimal subscribers using rclpy.
|
|
| 1 | 2017-12-09 | examples_rclpy_minimal_service |
Examples of minimal service servers using rclpy.
Examples of minimal service servers using rclpy.
|
|
| 1 | 2017-12-09 | examples_rclpy_minimal_publisher |
Examples of minimal publishers using rclpy.
Examples of minimal publishers using rclpy.
|
|
| 1 | 2017-12-09 | examples_rclpy_minimal_client |
Examples of minimal service clients using rclpy.
Examples of minimal service clients using rclpy.
|
|
| 1 | 2017-12-09 | examples_rclpy_executors |
Examples of creating and using exectors to run multiple nodes in the same process
Examples of creating and using exectors to run multiple nodes in the same process
|
|
| 1 | 2017-12-09 | examples_rclcpp_minimal_timer |
Examples of minimal nodes which have timers
Examples of minimal nodes which have timers
|
|
| 1 | 2017-12-09 | examples_rclcpp_minimal_subscriber |
Examples of minimal subscribers
Examples of minimal subscribers
|
|
| 1 | 2017-12-09 | examples_rclcpp_minimal_service |
A minimal service server which adds two numbers
A minimal service server which adds two numbers
|
|
| 1 | 2017-12-09 | examples_rclcpp_minimal_publisher |
Examples of minimal publisher nodes
Examples of minimal publisher nodes
|
|
| 1 | 2017-12-09 | examples_rclcpp_minimal_composition |
Minimalist examples of composing nodes in the same
process
Minimalist examples of composing nodes in the same
process
|
|
| 1 | 2017-12-09 | examples_rclcpp_minimal_client |
Examples of minimal service clients
Examples of minimal service clients
|
|
| 1 | 2017-12-09 | example_interfaces |
Contains message and service definitions used by the examples.
Contains message and service definitions used by the examples.
|
|
| 1 | 2017-12-09 | dummy_sensors |
dummy sensor nodes
dummy sensor nodes
|
|
| 1 | 2017-12-09 | dummy_robot_bringup |
dummy robot bringup
dummy robot bringup
|
|
| 1 | 2017-12-09 | dummy_map_server |
dummy map server node
dummy map server node
|
|
| 2 | 2017-12-09 | diagnostic_msgs |
A package containing some diagnostics related message and service definitions.
A package containing some diagnostics related message and service definitions.
|
|
| 2 | 2017-12-09 | depthimage_to_laserscan |
depthimage_to_laserscan
depthimage_to_laserscan
|
|
| 1 | 2017-12-09 | demo_nodes_py |
Python nodes which were previously in the ros2/examples repository but are now just used for demo purposes.
Python nodes which were previously in the ros2/examples repository but are now just used for demo purposes.
|
|
| 1 | 2017-12-09 | demo_nodes_cpp_native |
C++ nodes which access the native handles of the rmw implemenation.
C++ nodes which access the native handles of the rmw implemenation.
|
|
| 1 | 2017-12-09 | demo_nodes_cpp |
C++ nodes which were previously in the ros2/examples repository but are now just used for demo purposes.
C++ nodes which were previously in the ros2/examples repository but are now just used for demo purposes.
|
|
| 1 | 2017-12-09 | composition |
Examples for composing multiple nodes in a single process.
Examples for composing multiple nodes in a single process.
|
|
| 1 | 2017-12-09 | common_interfaces |
common_interfaces contains messages and services that are widely used by other ROS packages.
common_interfaces contains messages and services that are widely used by other ROS packages.
|
|
| 2 | 2017-12-09 | cartographer_ros_msgs |
ROS messages for the cartographer_ros package.
ROS messages for the cartographer_ros package.
|
|
| 2 | 2017-12-09 | cartographer_ros |
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations. This package provides Cartographer's ROS integration.
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations. This package provides Cartographer's ROS integration.
|
|
| 2 | 2017-12-09 | cartographer |
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations.
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations.
|
|
| 1 | 2017-12-09 | builtin_interfaces |
A package containing builtin message and service definitions.
A package containing builtin message and service definitions.
|
|
| 1 | 2017-12-09 | astra_camera |
Drivers for Orbbec Astra Devices.
Drivers for Orbbec Astra Devices.
|
|
| 1 | 2017-12-09 | ament_uncrustify |
The ability to check code against style conventions using uncrustify
and generate xUnit test result files.
The ability to check code against style conventions using uncrustify
and generate xUnit test result files.
|
|
| 1 | 2017-12-09 | ament_tools |
The command line tools for the ament buildsystem.
The command line tools for the ament buildsystem.
|
|
| 1 | 2017-12-09 | ament_pyflakes |
The ability to check code using pyflakes and generate xUnit test
result files.
The ability to check code using pyflakes and generate xUnit test
result files.
|
|
| 1 | 2017-12-09 | ament_pep8 |
The ability to check code against the style conventions in PEP 8 and
generate xUnit test result files.
The ability to check code against the style conventions in PEP 8 and
generate xUnit test result files.
|
|
| 1 | 2017-12-09 | ament_pep257 |
The ability to check code against the style conventions in PEP 8 and
generate xUnit test result files.
The ability to check code against the style conventions in PEP 8 and
generate xUnit test result files.
|
|
| 1 | 2017-12-09 | ament_package |
The parser for the manifest files in the ament buildsystem.
The parser for the manifest files in the ament buildsystem.
|
|
| 1 | 2017-12-09 | ament_lint_common |
The list of commonly used linters in the ament buildsytem in CMake.
The list of commonly used linters in the ament buildsytem in CMake.
|
|
| 1 | 2017-12-09 | ament_lint_cmake |
The ability to lint CMake code using cmakelint and generate xUnit test
result files.
The ability to lint CMake code using cmakelint and generate xUnit test
result files.
|
|
| 1 | 2017-12-09 | ament_lint_auto |
The auto-magic functions for ease to use of the ament linters in CMake.
The auto-magic functions for ease to use of the ament linters in CMake.
|
|
| 1 | 2017-12-09 | ament_index_python |
Python API to access the ament resource index.
Python API to access the ament resource index.
|
|
| 1 | 2017-12-09 | ament_index_cpp |
C++ API to access the ament resource index.
C++ API to access the ament resource index.
|
|
| 1 | 2017-12-09 | ament_flake8 |
The ability to check code for style and syntax conventions with flake8.
The ability to check code for style and syntax conventions with flake8.
|
|
| 1 | 2017-12-09 | ament_cpplint |
The ability to check code against the Google style conventions using
cpplint and generate xUnit test result files.
The ability to check code against the Google style conventions using
cpplint and generate xUnit test result files.
|
|
| 1 | 2017-12-09 | ament_cppcheck |
The ability to perform static code analysis on C/C++ code using Cppcheck
and generate xUnit test result files.
The ability to perform static code analysis on C/C++ code using Cppcheck
and generate xUnit test result files.
|
|
| 1 | 2017-12-09 | ament_copyright |
The ability to check source files for copyright and license
information.
The ability to check source files for copyright and license
information.
|
|
| 1 | 2017-12-09 | ament_cmake_uncrustify |
The CMake API for ament_uncrustify to check code against styleconventions
using uncrustify.
The CMake API for ament_uncrustify to check code against styleconventions
using uncrustify.
|
|
| 1 | 2017-12-09 | ament_cmake_test |
The ability to add tests in the ament buildsystem in CMake.
The ability to add tests in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_target_dependencies |
The ability to add definitions, include directories and libraries of a package to a target in the ament buildsystem in CMake.
The ability to add definitions, include directories and libraries of a package to a target in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_ros |
The ROS specific CMake bits in the ament buildsystem.
The ROS specific CMake bits in the ament buildsystem.
|
|
| 1 | 2017-12-09 | ament_cmake_python |
The ability to use Python in the ament buildsystem in CMake.
The ability to use Python in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_pytest |
The ability to run Python tests using pytest in the ament buildsystem in CMake.
The ability to run Python tests using pytest in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_pyflakes |
The CMake API for ament_pyflakes to check code using pyflakes.
The CMake API for ament_pyflakes to check code using pyflakes.
|
|
| 1 | 2017-12-09 | ament_cmake_pep8 |
The CMake API for ament_pep8 to check code against the style conventions in
PEP 8.
The CMake API for ament_pep8 to check code against the style conventions in
PEP 8.
|
|
| 1 | 2017-12-09 | ament_cmake_pep257 |
The CMake API for ament_pep257 to check code against the style conventions in
PEP 257.
The CMake API for ament_pep257 to check code against the style conventions in
PEP 257.
|
|
| 1 | 2017-12-09 | ament_cmake_nose |
The ability to add nose-based tests in the ament buildsystem in CMake.
The ability to add nose-based tests in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_lint_cmake |
The CMake API for ament_lint_cmake to lint CMake code using cmakelint.
The CMake API for ament_lint_cmake to lint CMake code using cmakelint.
|
|
| 1 | 2017-12-09 | ament_cmake_libraries |
The functionality to deduplicate libraries in the ament buildsystem in CMake.
The functionality to deduplicate libraries in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_include_directories |
The functionality to order include directories according to a chain of prefixes in the ament buildsystem in CMake.
The functionality to order include directories according to a chain of prefixes in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_gtest |
The ability to add gtest-based tests in the ament buildsystem in CMake.
The ability to add gtest-based tests in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_gmock |
The ability to add Google mock-based tests in the ament buildsystem in CMake.
The ability to add Google mock-based tests in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_flake8 |
The CMake API for ament_flake8 to check code syntax and style conventions
with flake8.
The CMake API for ament_flake8 to check code syntax and style conventions
with flake8.
|
|
| 1 | 2017-12-09 | ament_cmake_export_link_flags |
The ability to export link flags to downstream packages in the ament buildsystem.
The ability to export link flags to downstream packages in the ament buildsystem.
|
|
| 1 | 2017-12-09 | ament_cmake_export_libraries |
The ability to export libraries to downstream packages in the ament buildsystem in CMake.
The ability to export libraries to downstream packages in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_export_interfaces |
The ability to export interfaces to downstream packages in the ament buildsystem in CMake.
The ability to export interfaces to downstream packages in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_export_include_directories |
The ability to export include directories to downstream packages in the ament buildsystem in CMake.
The ability to export include directories to downstream packages in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_export_dependencies |
The ability to export dependencies to downstream packages in the ament buildsystem in CMake.
The ability to export dependencies to downstream packages in the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake_export_definitions |
The ability to export definitions to downstream packages in the ament buildsystem.
The ability to export definitions to downstream packages in the ament buildsystem.
|
|
| 1 | 2017-12-09 | ament_cmake_cpplint |
The CMake API for ament_cpplint to lint C / C++ code using cpplint.
The CMake API for ament_cpplint to lint C / C++ code using cpplint.
|
|
| 1 | 2017-12-09 | ament_cmake_cppcheck |
The CMake API for ament_cppcheck to perform static code analysis on C/C++
code using Cppcheck.
The CMake API for ament_cppcheck to perform static code analysis on C/C++
code using Cppcheck.
|
|
| 1 | 2017-12-09 | ament_cmake_core |
The core of the ament buildsystem in CMake.
Several subcomponents provide specific funtionalities:
* environment: provide prefix-level setup files
* environment_hooks: provide package-level setup files and environment hooks
* index: store information in an index and retrieve them without crawling
* package_templates: templates from the ament_package Python package
* symlink_install: use symlinks for CMake install commands
The core of the ament buildsystem in CMake.
Several subcomponents provide specific funtionalities:
* environment: provide prefix-level setup files
* environment_hooks: provide package-level setup files and environment hooks
* index: store information in an index and retrieve them without crawling
* package_templates: templates from the ament_package Python package
* symlink_install: use symlinks for CMake install commands
|
|
| 1 | 2017-12-09 | ament_cmake_copyright |
The CMake API for ament_copyright to check every source file contains copyright reference.
The CMake API for ament_copyright to check every source file contains copyright reference.
|
|
| 1 | 2017-12-09 | ament_cmake_clang_format |
The CMake API for ament_clang_format to lint C / C++ code using clang format.
The CMake API for ament_clang_format to lint C / C++ code using clang format.
|
|
| 1 | 2017-12-09 | ament_cmake_auto |
The auto-magic functions for ease to use of the ament buildsystem in CMake.
The auto-magic functions for ease to use of the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_cmake |
The entry point package for the ament buildsystem in CMake.
The entry point package for the ament buildsystem in CMake.
|
|
| 1 | 2017-12-09 | ament_clang_format |
The ability to check code against style conventions using
clang-format and generate xUnit test result files.
The ability to check code against style conventions using
clang-format and generate xUnit test result files.
|
|
| 2 | 2017-12-09 | amcl |
|
|
| 2 | 2017-12-09 | actionlib_msgs |
A package containing some message definitions used in the implementation or actions.
A package containing some message definitions used in the implementation or actions.
|
|
| 3 | 2017-11-14 | image_geometry |
`image_geometry` contains C++ and Python libraries for interpreting images
geometrically. It interfaces the calibration parameters in sensor_msgs/CameraInfo
messages with OpenCV functions such as image rectification, much as cv_bridge
interfaces ROS sensor_msgs/Image with OpenCV data types.
`image_geometry` contains C++ and Python libraries for interpreting images
geometrically. It interfaces the calibration parameters in sensor_msgs/CameraInfo
messages with OpenCV functions such as image rectification, much as cv_bridge
interfaces ROS sensor_msgs/Image with OpenCV data types.
|
|
| 1 | 2017-09-29 | uncrustify |
Package a newer version of uncrustify (0.61+, b6593c1, April 14th 2015).
Package a newer version of uncrustify (0.61+, b6593c1, April 14th 2015).
|
|
| 1 | 2017-08-08 | gtest_vendor |
The package provides GoogleTest.
The package provides GoogleTest.
|
|
| 1 | 2017-08-08 | gmock_vendor |
The package provides GoogleMock.
The package provides GoogleMock.
|
|
| 1 | zstd_vendor | |||
| 1 | zstd_point_cloud_transport | |||
| 1 | zstd_image_transport | |||
| 1 | zmqpp_vendor | |||
| 1 | zlib_point_cloud_transport | |||
| 1 | zivid_samples | |||
| 1 | zivid_interfaces | |||
| 1 | zivid_camera | |||
| 1 | zeroconf_msgs | |||
| 1 | zeroconf_jmdns_suite | |||
| 1 | zeroconf_avahi_suite | |||
| 1 | zeroconf_avahi_demos |
Packages
| Name | Description | |||
|---|---|---|---|---|
| 1 | 2024-12-03 | osrf_pycommon |
Commonly needed Python modules, used by Python software developed at OSRF.
Commonly needed Python modules, used by Python software developed at OSRF.
|
|
| 1 | 2024-11-29 | fastcdr |
*eProsima Fast CDR* is a C++ serialization library implementing the Common Data Representation (CDR) mechanism defined by the Object Management Group (OMG) consortium. CDR is the serialization mechanism used in DDS for the DDS Interoperability Wire Protocol (DDSI-RTPS).
*eProsima Fast CDR* is a C++ serialization library implementing the Common Data Representation (CDR) mechanism defined by the Object Management Group (OMG) consortium. CDR is the serialization mechanism used in DDS for the DDS Interoperability Wire Protocol (DDSI-RTPS).
|
|
| 2 | 2024-11-20 | resource_retriever |
This package retrieves data from url-format files such as http://,
ftp://, package:// file://, etc., and loads the data into memory.
The package:// url for ros packages is translated into a local
file:// url. The resourse retriever was initially designed to load
mesh files into memory, but it can be used for any type of
data. The resource retriever is based on the the libcurl library.
This package retrieves data from url-format files such as http://,
ftp://, package:// file://, etc., and loads the data into memory.
The package:// url for ros packages is translated into a local
file:// url. The resourse retriever was initially designed to load
mesh files into memory, but it can be used for any type of
data. The resource retriever is based on the the libcurl library.
|
|
| 1 | 2024-11-20 | libcurl_vendor |
Wrapper around libcurl, it provides a fixed CMake module and an ExternalProject build of it.
Wrapper around libcurl, it provides a fixed CMake module and an ExternalProject build of it.
|
|
| 1 | 2024-11-20 | laser_geometry |
This package contains a class for converting from a 2D laser scan as defined by
sensor_msgs/LaserScan into a point cloud as defined by sensor_msgs/PointCloud
or sensor_msgs/PointCloud2. In particular, it contains functionality to account
for the skew resulting from moving robots or tilting laser scanners.
This package contains a class for converting from a 2D laser scan as defined by
sensor_msgs/LaserScan into a point cloud as defined by sensor_msgs/PointCloud
or sensor_msgs/PointCloud2. In particular, it contains functionality to account
for the skew resulting from moving robots or tilting laser scanners.
|
|
| 2 | 2024-04-26 | map_msgs |
This package defines messages commonly used in mapping packages.
This package defines messages commonly used in mapping packages.
|
|
| 1 | 2024-04-26 | gtest_vendor |
The package provides GoogleTest.
The package provides GoogleTest.
|
|
| 1 | 2024-04-26 | gmock_vendor |
The package provides GoogleMock.
The package provides GoogleMock.
|
|
| 1 | 2023-03-22 | angles |
This package provides a set of simple math utilities to work
with angles. The utilities cover simple things like
normalizing an angle and conversion between degrees and
radians. But even if you're trying to calculate things like
the shortest angular distance between two joint space
positions of your robot, but the joint motion is constrained
by joint limits, this package is what you need. The code in
this package is stable and well tested. There are no plans for
major changes in the near future.
This package provides a set of simple math utilities to work
with angles. The utilities cover simple things like
normalizing an angle and conversion between degrees and
radians. But even if you're trying to calculate things like
the shortest angular distance between two joint space
positions of your robot, but the joint motion is constrained
by joint limits, this package is what you need. The code in
this package is stable and well tested. There are no plans for
major changes in the near future.
|
|
| 1 | 2023-03-08 | test_osrf_testing_tools_cpp |
Test package, which uses things exported by osrf_testing_tools_cpp.
Test package, which uses things exported by osrf_testing_tools_cpp.
|
|
| 1 | 2023-03-08 | osrf_testing_tools_cpp |
Testing tools for C++, and is used in various OSRF projects.
Testing tools for C++, and is used in various OSRF projects.
|
|
| 1 | 2019-01-25 | control_msgs |
control_msgs contains base messages and actions useful for
controlling robots. It provides representations for controller
setpoints and joint and cartesian trajectories.
control_msgs contains base messages and actions useful for
controlling robots. It provides representations for controller
setpoints and joint and cartesian trajectories.
|
|
| 3 | 2018-12-06 | tf2_ros |
This package contains the ROS bindings for the tf2 library, for both Python and C++.
This package contains the ROS bindings for the tf2 library, for both Python and C++.
|
|
| 3 | 2018-12-06 | tf2_msgs |
tf2_msgs
tf2_msgs
|
|
| 3 | 2018-12-06 | tf2_geometry_msgs |
tf2_geometry_msgs
tf2_geometry_msgs
|
|
| 3 | 2018-12-06 | tf2_eigen |
tf2_eigen
tf2_eigen
|
|
| 3 | 2018-12-06 | tf2 |
tf2 is the second generation of the transform library, which lets
the user keep track of multiple coordinate frames over time. tf2
maintains the relationship between coordinate frames in a tree
structure buffered in time, and lets the user transform points,
vectors, etc between any two coordinate frames at any desired
point in time.
tf2 is the second generation of the transform library, which lets
the user keep track of multiple coordinate frames over time. tf2
maintains the relationship between coordinate frames in a tree
structure buffered in time, and lets the user transform points,
vectors, etc between any two coordinate frames at any desired
point in time.
|
|
| 1 | 2018-10-30 | topic_monitor |
Package containing tools for monitoring ROS 2 topics.
Package containing tools for monitoring ROS 2 topics.
|
|
| 1 | 2018-10-30 | pendulum_msgs |
Custom messages for real-time pendulum control.
Custom messages for real-time pendulum control.
|
|
| 1 | 2018-10-30 | pendulum_control |
Demonstrates ROS 2's realtime capabilities with a simulated inverted pendulum.
Demonstrates ROS 2's realtime capabilities with a simulated inverted pendulum.
|
|
| 1 | 2018-10-30 | logging_demo |
Examples for using and configuring loggers.
Examples for using and configuring loggers.
|
|
| 1 | 2018-10-30 | lifecycle |
Package containing demos for lifecycle implementation
Package containing demos for lifecycle implementation
|
|
| 1 | 2018-10-30 | intra_process_demo |
Demonstrations of intra process communication.
Demonstrations of intra process communication.
|
|
| 1 | 2018-10-30 | image_tools |
Tools to capture and play back images to and from DDS subscriptions and publications.
Tools to capture and play back images to and from DDS subscriptions and publications.
|
|
| 1 | 2018-10-30 | dummy_sensors |
dummy sensor nodes
dummy sensor nodes
|
|
| 1 | 2018-10-30 | dummy_robot_bringup |
dummy robot bringup
dummy robot bringup
|
|
| 1 | 2018-10-30 | dummy_map_server |
dummy map server node
dummy map server node
|
|
| 1 | 2018-10-30 | demo_nodes_py |
Python nodes which were previously in the ros2/examples repository but are now just used for demo purposes.
Python nodes which were previously in the ros2/examples repository but are now just used for demo purposes.
|
|
| 1 | 2018-10-30 | demo_nodes_cpp_native |
C++ nodes which access the native handles of the rmw implemenation.
C++ nodes which access the native handles of the rmw implemenation.
|
|
| 1 | 2018-10-30 | demo_nodes_cpp |
C++ nodes which were previously in the ros2/examples repository but are now just used for demo purposes.
C++ nodes which were previously in the ros2/examples repository but are now just used for demo purposes.
|
|
| 1 | 2018-10-30 | composition |
Examples for composing multiple nodes in a single process.
Examples for composing multiple nodes in a single process.
|
|
| 1 | 2018-10-19 | pluginlib |
The pluginlib package provides tools for writing and dynamically loading plugins using the ROS build infrastructure.
To work, these tools require plugin providers to register their plugins in the package.xml of their package.
The pluginlib package provides tools for writing and dynamically loading plugins using the ROS build infrastructure.
To work, these tools require plugin providers to register their plugins in the package.xml of their package.
|
|
| 1 | 2018-10-19 | class_loader |
The class_loader package is a ROS-independent package for loading plugins during runtime and the foundation of the higher level ROS "pluginlib" library.
class_loader utilizes the host operating system's runtime loader to open runtime libraries (e.g. .so/.dll files), introspect the library for exported plugin classes, and allows users to instantiate objects of these exported classes without the explicit declaration (i.e. header file) for those classes.
The class_loader package is a ROS-independent package for loading plugins during runtime and the foundation of the higher level ROS "pluginlib" library.
class_loader utilizes the host operating system's runtime loader to open runtime libraries (e.g. .so/.dll files), introspect the library for exported plugin classes, and allows users to instantiate objects of these exported classes without the explicit declaration (i.e. header file) for those classes.
|
|
| 2 | 2018-09-27 | sophus |
C++ implementation of Lie Groups using Eigen.
C++ implementation of Lie Groups using Eigen.
|
|
| 1 | 2018-09-27 | ecl_utilities |
Includes various supporting tools and utilities for c++ programming.
Includes various supporting tools and utilities for c++ programming.
|
|
| 1 | 2018-09-27 | ecl_type_traits |
Extends c++ type traits and implements a few more to boot.
Extends c++ type traits and implements a few more to boot.
|
|
| 1 | 2018-09-27 | ecl_tools |
Tools and utilities for ecl development.
Tools and utilities for ecl development.
|
|
| 1 | 2018-09-27 | ecl_time_lite |
Provides a portable set of time functions that are especially useful for
porting other code or being wrapped by higher level c++ classes.
Provides a portable set of time functions that are especially useful for
porting other code or being wrapped by higher level c++ classes.
|
|
| 1 | 2018-09-27 | ecl_time |
Timing utilities are very dependent on the system api provided for their use.
This package provides a means for handling different timing models. Current support
- posix rt : complete.
- macosx : posix timers only, missing absolute timers.
- win : none.
Timing utilities are very dependent on the system api provided for their use.
This package provides a means for handling different timing models. Current support
- posix rt : complete.
- macosx : posix timers only, missing absolute timers.
- win : none.
|
|
| 1 | 2018-09-27 | ecl_threads |
This package provides the c++ extensions for a variety of threaded
programming tools. These are usually different on different
platforms, so the architecture for a cross-platform framework
is also implemented.
This package provides the c++ extensions for a variety of threaded
programming tools. These are usually different on different
platforms, so the architecture for a cross-platform framework
is also implemented.
|
|
| 1 | 2018-09-27 | ecl_streams |
These are lightweight text streaming classes that connect to standardised
ecl type devices.
These are lightweight text streaming classes that connect to standardised
ecl type devices.
|
|
| 1 | 2018-09-27 | ecl_statistics |
Common statistical structures and algorithms for control systems.
Common statistical structures and algorithms for control systems.
|
|
| 1 | 2018-09-27 | ecl_sigslots_lite |
This avoids use of dynamic storage (malloc/new) and thread safety (mutexes) to
provide a very simple sigslots implementation that can be used for *very*
embedded development.
This avoids use of dynamic storage (malloc/new) and thread safety (mutexes) to
provide a very simple sigslots implementation that can be used for *very*
embedded development.
|
|
| 1 | 2018-09-27 | ecl_sigslots |
Provides a signal/slot mechanism (in the same vein as qt sigslots,
boost::signals etc for intra-process communication. These include
some improvements - they do not need a preprocessor, are fully type safe,
allow for simple connections via a posix style string identifier
and are multithread-safe.
Provides a signal/slot mechanism (in the same vein as qt sigslots,
boost::signals etc for intra-process communication. These include
some improvements - they do not need a preprocessor, are fully type safe,
allow for simple connections via a posix style string identifier
and are multithread-safe.
|
|
| 1 | 2018-09-27 | ecl_mpl |
Metaprogramming tools move alot of runtime calculations to be shifted to
compile time. This has only very elementary structures at this stage.
Metaprogramming tools move alot of runtime calculations to be shifted to
compile time. This has only very elementary structures at this stage.
|
|
| 2 | 2018-09-27 | ecl_mobile_robot |
Contains transforms (e.g. differential drive inverse kinematics)
for the various types of mobile robot platforms.
Contains transforms (e.g. differential drive inverse kinematics)
for the various types of mobile robot platforms.
|
|
| 1 | 2018-09-27 | ecl_math |
This package provides simple support to cmath, filling in holes
or redefining in a c++ formulation where desirable.
This package provides simple support to cmath, filling in holes
or redefining in a c++ formulation where desirable.
|
|
| 2 | 2018-09-27 | ecl_manipulators |
Deploys various manipulation algorithms, currently just
feedforward filters (interpolations).
Deploys various manipulation algorithms, currently just
feedforward filters (interpolations).
|
|
| 1 | 2018-09-27 | ecl_lite |
Libraries and utilities for embedded and low-level linux development.
Libraries and utilities for embedded and low-level linux development.
|
|
| 1 | 2018-09-27 | ecl_linear_algebra |
Ecl frontend to a linear matrix package (currently eigen).
Ecl frontend to a linear matrix package (currently eigen).
|
|
| 1 | 2018-09-27 | ecl_license |
Maintains the ecl licenses and also provides an install
target for deploying licenses with the ecl libraries.
Maintains the ecl licenses and also provides an install
target for deploying licenses with the ecl libraries.
|
|
| 1 | 2018-09-27 | ecl_ipc |
Interprocess mechanisms vary greatly across platforms - sysv, posix, win32, there
are more than a few. This package provides an infrastructure to allow for developing
cross platform c++ wrappers around the lower level c api's that handle these
mechanisms. These make it not only easier to utilise such mechanisms, but allow it
to be done consistently across platforms.
Interprocess mechanisms vary greatly across platforms - sysv, posix, win32, there
are more than a few. This package provides an infrastructure to allow for developing
cross platform c++ wrappers around the lower level c api's that handle these
mechanisms. These make it not only easier to utilise such mechanisms, but allow it
to be done consistently across platforms.
|
|
| 1 | 2018-09-27 | ecl_io |
Most implementations (windows, posix, ...) have slightly different api for
low level input-output functions. These are gathered here and re-represented
with a cross platform set of functions.
Most implementations (windows, posix, ...) have slightly different api for
low level input-output functions. These are gathered here and re-represented
with a cross platform set of functions.
|
|
| 1 | 2018-09-27 | ecl_geometry |
Any tools relating to mathematical geometry.
Primarily featuring polynomials and interpolations.
Any tools relating to mathematical geometry.
Primarily featuring polynomials and interpolations.
|
|
| 1 | 2018-09-27 | ecl_formatters |
The formatters here simply format various input types to a specified
text format. They can be used with most streaming types (including both
ecl and stl streams).
The formatters here simply format various input types to a specified
text format. They can be used with most streaming types (including both
ecl and stl streams).
|
|
| 1 | 2018-09-27 | ecl_filesystem |
Cross platform filesystem utilities (until c++11 makes its way in).
Cross platform filesystem utilities (until c++11 makes its way in).
|
|
| 1 | 2018-09-27 | ecl_exceptions |
Template based exceptions - these are simple and practical
and avoid the proliferation of exception types. Although not
syntatactically ideal, it is convenient and eminently practical.
Template based exceptions - these are simple and practical
and avoid the proliferation of exception types. Although not
syntatactically ideal, it is convenient and eminently practical.
|
|
| 1 | 2018-09-27 | ecl_errors |
This library provides lean and mean error mechanisms.
It includes c style error functions as well as a few
useful macros. For higher level mechanisms,
refer to ecl_exceptions.
This library provides lean and mean error mechanisms.
It includes c style error functions as well as a few
useful macros. For higher level mechanisms,
refer to ecl_exceptions.
|
|
| 1 | 2018-09-27 | ecl_eigen |
This provides an Eigen implementation for ecl's linear algebra.
This provides an Eigen implementation for ecl's linear algebra.
|
|
| 1 | 2018-09-27 | ecl_devices |
Provides an extensible and standardised framework for input-output devices.
Provides an extensible and standardised framework for input-output devices.
|
|
| 1 | 2018-09-27 | ecl_core_apps |
This includes a suite of programs demo'ing various aspects of the
ecl_core. It also includes various benchmarking and utility programs for
use primarily with embedded systems.
This includes a suite of programs demo'ing various aspects of the
ecl_core. It also includes various benchmarking and utility programs for
use primarily with embedded systems.
|
|
| 1 | 2018-09-27 | ecl_core |
A set of tools and interfaces extending the capabilities of c++ to
provide a lightweight, consistent interface with a focus for control
programming.
A set of tools and interfaces extending the capabilities of c++ to
provide a lightweight, consistent interface with a focus for control
programming.
|
|
| 1 | 2018-09-27 | ecl_converters_lite |
These are a very simple version of some of the functions in ecl_converters
suitable for firmware development. That is, there is no use of new,
templates or exceptions.
These are a very simple version of some of the functions in ecl_converters
suitable for firmware development. That is, there is no use of new,
templates or exceptions.
|
|
| 1 | 2018-09-27 | ecl_converters |
Some fast/convenient type converters, mostly for char strings or strings.
These are not really fully fleshed out, alot of them could use the addition for
the whole range of fundamental types (e.g. all integers, not just int, unsigned int).
They will come as the need arises.
Some fast/convenient type converters, mostly for char strings or strings.
These are not really fully fleshed out, alot of them could use the addition for
the whole range of fundamental types (e.g. all integers, not just int, unsigned int).
They will come as the need arises.
|
|
| 1 | 2018-09-27 | ecl_containers |
The containers included here are intended to extend the stl containers.
In all cases, these implementations are designed to implement
c++ conveniences and safety where speed is not sacrificed.
Also includes techniques for memory debugging of common problems such
as buffer overruns.
The containers included here are intended to extend the stl containers.
In all cases, these implementations are designed to implement
c++ conveniences and safety where speed is not sacrificed.
Also includes techniques for memory debugging of common problems such
as buffer overruns.
|
|
| 1 | 2018-09-27 | ecl_console |
Color codes for ansii consoles.
Color codes for ansii consoles.
|
|
| 1 | 2018-09-27 | ecl_config |
These tools inspect and describe your system with macros, types
and functions.
These tools inspect and describe your system with macros, types
and functions.
|
|
| 1 | 2018-09-27 | ecl_concepts |
Introduces a compile time concept checking mechanism that can be used
most commonly to check for required functionality when passing
template arguments.
Introduces a compile time concept checking mechanism that can be used
most commonly to check for required functionality when passing
template arguments.
|
|
| 1 | 2018-09-27 | ecl_command_line |
Embeds the TCLAP library inside the ecl. This is a very convenient
command line parser in templatised c++.
Embeds the TCLAP library inside the ecl. This is a very convenient
command line parser in templatised c++.
|
|
| 1 | 2018-09-27 | ecl_build |
Collection of cmake/make build tools primarily for ecl development itself, but also
contains a few cmake modules useful outside of the ecl.
Collection of cmake/make build tools primarily for ecl development itself, but also
contains a few cmake modules useful outside of the ecl.
|
|
| 2 | 2018-08-22 | visualization_msgs |
A package containing some visualization and interaction related message definitions.
A package containing some visualization and interaction related message definitions.
|
|
| 2 | 2018-08-22 | trajectory_msgs |
A package containing some robot trajectory message definitions.
A package containing some robot trajectory message definitions.
|
|
| 2 | 2018-08-22 | stereo_msgs |
A package containing some stereo camera related message definitions.
A package containing some stereo camera related message definitions.
|
|
| 3 | 2018-08-22 | std_srvs |
A package containing some standard service definitions.
A package containing some standard service definitions.
|
|
| 2 | 2018-08-22 | std_msgs |
A package containing some standard message definitions.
A package containing some standard message definitions.
|
|
| 2 | 2018-08-22 | shape_msgs |
A package containing some message definitions which describe geometric shapes.
A package containing some message definitions which describe geometric shapes.
|
|
| 2 | 2018-08-22 | sensor_msgs |
A package containing some sensor data related message and service definitions.
A package containing some sensor data related message and service definitions.
|
|
| 1 | 2018-08-22 | ros2topic |
The topic command for ROS 2 command line tools.
The topic command for ROS 2 command line tools.
|
|
| 1 | 2018-08-22 | ros2srv |
The srv command for ROS 2 command line tools.
The srv command for ROS 2 command line tools.
|
|
| 1 | 2018-08-22 | ros2service |
The service command for ROS 2 command line tools.
The service command for ROS 2 command line tools.
|
|
| 1 | 2018-08-22 | ros2run |
The run command for ROS 2 command line tools.
The run command for ROS 2 command line tools.
|
|
| 1 | 2018-08-22 | ros2pkg |
The pkg command for ROS 2 command line tools.
The pkg command for ROS 2 command line tools.
|
|
| 1 | 2018-08-22 | ros2param |
The param command for ROS 2 command line tools.
The param command for ROS 2 command line tools.
|
|
| 1 | 2018-08-22 | ros2node |
The node command for ROS 2 command line tools.
The node command for ROS 2 command line tools.
|
|
| 1 | 2018-08-22 | ros2msg |
The msg command for ROS 2 command line tools.
The msg command for ROS 2 command line tools.
|
|
| 1 | 2018-08-22 | ros2lifecycle |
The lifecycle command for ROS 2 command line tools.
The lifecycle command for ROS 2 command line tools.
|
|
| 2 | 2018-08-22 | ros2launch |
The launch command for ROS 2 command line tools.
The launch command for ROS 2 command line tools.
|
|
| 1 | 2018-08-22 | ros2cli |
Framework for ROS 2 command line tools.
Framework for ROS 2 command line tools.
|
|
| 1 | 2018-08-22 | ros1_bridge |
A simple bridge between ROS 1 and ROS 2
A simple bridge between ROS 1 and ROS 2
|
|
| 1 | 2018-08-22 | rclpy |
Package containing the Python client.
Package containing the Python client.
|
|
| 2 | 2018-08-22 | nav_msgs |
A package containing some navigation related message and service definitions.
A package containing some navigation related message and service definitions.
|
|
| 1 | 2018-08-22 | launch_testing |
Helper scripts for tests that use the ROS launch tool.
Helper scripts for tests that use the ROS launch tool.
|
|
| 2 | 2018-08-22 | launch_ros |
ROS specific extensions to the launch tool.
ROS specific extensions to the launch tool.
|
|
| 1 | 2018-08-22 | launch |
The ROS launch tool.
The ROS launch tool.
|
|
| 2 | 2018-08-22 | geometry_msgs |
A package containing some geometry related message definitions.
A package containing some geometry related message definitions.
|
|
| 2 | 2018-08-22 | diagnostic_msgs |
A package containing some diagnostics related message and service definitions.
A package containing some diagnostics related message and service definitions.
|
|
| 1 | 2018-08-22 | common_interfaces |
common_interfaces contains messages and services that are widely used by other ROS packages.
common_interfaces contains messages and services that are widely used by other ROS packages.
|
|
| 2 | 2018-08-22 | actionlib_msgs |
A package containing some message definitions used in the implementation or actions.
A package containing some message definitions used in the implementation or actions.
|
|
| 1 | 2018-08-20 | rviz_yaml_cpp_vendor |
Wrapper around yaml-cpp, it provides a fixed CMake module and an ExternalProject build of it.
Wrapper around yaml-cpp, it provides a fixed CMake module and an ExternalProject build of it.
|
|
| 1 | 2018-08-20 | rviz_visual_testing_framework |
3D testing framework for RViz.
3D testing framework for RViz.
|
|
| 1 | 2018-08-20 | rviz_rendering_tests |
Example plugin for RViz - documents and tests RViz plugin development
Example plugin for RViz - documents and tests RViz plugin development
|
|
| 1 | 2018-08-20 | rviz_rendering |
Library which provides the 3D rendering functionality in rviz.
Library which provides the 3D rendering functionality in rviz.
|
|
| 1 | 2018-08-20 | rviz_ogre_vendor |
Wrapper around ogre3d, it provides a fixed CMake module and an ExternalProject build of ogre.
Wrapper around ogre3d, it provides a fixed CMake module and an ExternalProject build of ogre.
|
|
| 1 | 2018-08-20 | rviz_default_plugins |
Several default plugins for rviz to cover the basic functionality.
Several default plugins for rviz to cover the basic functionality.
|
|
| 1 | 2018-08-20 | rviz_common |
Common rviz API, used by rviz plugins and applications.
Common rviz API, used by rviz plugins and applications.
|
|
| 1 | 2018-08-20 | rviz_assimp_vendor |
Wrapper around assimp, providing nothing but a dependency on assimp, on some systems.
On others, it provides a fixed CMake module or even an ExternalProject build of assimp.
Wrapper around assimp, providing nothing but a dependency on assimp, on some systems.
On others, it provides a fixed CMake module or even an ExternalProject build of assimp.
|
|
| 1 | 2018-08-20 | rviz2 |
3D visualization tool for ROS.
3D visualization tool for ROS.
|
|
| 1 | 2018-08-20 | ros_environment |
The package provides the environment variables `ROS_VERSION` and `ROS_DISTRO`.
The package provides the environment variables `ROS_VERSION` and `ROS_DISTRO`.
|
|
| 1 | 2018-07-20 | turtlebot2_teleop |
Launch files for turtlebot2 teleop demo
Launch files for turtlebot2 teleop demo
|
|
| 1 | 2018-07-20 | turtlebot2_follower |
A simple follower using centroid in depth images.
A simple follower using centroid in depth images.
|
|
| 1 | 2018-07-20 | turtlebot2_drivers |
Set of drivers to talk to the kobuki base.
Set of drivers to talk to the kobuki base.
|
|
| 1 | 2018-07-20 | turtlebot2_demo |
Metapackage aggregating the turtlebot2 demo packages
Metapackage aggregating the turtlebot2 demo packages
|
|
| 1 | 2018-07-20 | turtlebot2_cartographer |
Launch files for turtlebot2 cartographer demo
Launch files for turtlebot2 cartographer demo
|
|
| 1 | 2018-07-20 | turtlebot2_amcl |
Demo of turtlebot2 localization with amcl.
Demo of turtlebot2 localization with amcl.
|
|
| 1 | 2018-07-20 | depthimage_to_pointcloud2 |
A simple node to convert a depth image and camera info into a PointCloud2.
A simple node to convert a depth image and camera info into a PointCloud2.
|
|
| 1 | 2018-07-19 | ament_package |
The parser for the manifest files in the ament buildsystem.
The parser for the manifest files in the ament buildsystem.
|
|
| 2 | 2018-07-18 | ros_core |
A package to aggregate the packages required to use publish / subscribe, services, generate messages and other core ROS concepts.
A package to aggregate the packages required to use publish / subscribe, services, generate messages and other core ROS concepts.
|
|
| 2 | 2018-07-18 | ros_base |
A package which extends 'ros_core' and includes other basic functionalities like tf2 and urdf.
A package which extends 'ros_core' and includes other basic functionalities like tf2 and urdf.
|
|
| 2 | 2018-07-18 | desktop |
A package which extends 'ros_base' and includes high level packages like vizualization tools and demos.
A package which extends 'ros_base' and includes high level packages like vizualization tools and demos.
|
|
| 2 | 2018-07-17 | rosidl_generator_py |
Generate the ROS interfaces in Python.
Generate the ROS interfaces in Python.
|
|
| 1 | 2018-07-17 | rmw_implementation |
The decision which ROS middleware implementation should be used for C++.
The decision which ROS middleware implementation should be used for C++.
|
|
| 1 | 2018-07-17 | rcl_yaml_param_parser |
Package containing various utility types and functions for C
Package containing various utility types and functions for C
|
|
| 1 | 2018-07-17 | rcl_lifecycle |
Package containing a C-based lifecycle implementation
Package containing a C-based lifecycle implementation
|
|
| 1 | 2018-07-17 | rcl |
The ROS client library common implementation.
This package contains an API which builds on the ROS middleware API and is optionally built upon by the other ROS client libraries.
The ROS client library common implementation.
This package contains an API which builds on the ROS middleware API and is optionally built upon by the other ROS client libraries.
|
|
| 3 | 2018-07-17 | python_cmake_module |
Provide CMake module with extra functionality for Python.
Provide CMake module with extra functionality for Python.
|
|
| 1 | 2018-07-17 | ament_cmake_test |
The ability to add tests in the ament buildsystem in CMake.
The ability to add tests in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_target_dependencies |
The ability to add definitions, include directories and libraries of a package to a target in the ament buildsystem in CMake.
The ability to add definitions, include directories and libraries of a package to a target in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_python |
The ability to use Python in the ament buildsystem in CMake.
The ability to use Python in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_pytest |
The ability to run Python tests using pytest in the ament buildsystem in CMake.
The ability to run Python tests using pytest in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_nose |
The ability to add nose-based tests in the ament buildsystem in CMake.
The ability to add nose-based tests in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_libraries |
The functionality to deduplicate libraries in the ament buildsystem in CMake.
The functionality to deduplicate libraries in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_include_directories |
The functionality to order include directories according to a chain of prefixes in the ament buildsystem in CMake.
The functionality to order include directories according to a chain of prefixes in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_gtest |
The ability to add gtest-based tests in the ament buildsystem in CMake.
The ability to add gtest-based tests in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_gmock |
The ability to add Google mock-based tests in the ament buildsystem in CMake.
The ability to add Google mock-based tests in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_export_link_flags |
The ability to export link flags to downstream packages in the ament buildsystem.
The ability to export link flags to downstream packages in the ament buildsystem.
|
|
| 1 | 2018-07-17 | ament_cmake_export_libraries |
The ability to export libraries to downstream packages in the ament buildsystem in CMake.
The ability to export libraries to downstream packages in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_export_interfaces |
The ability to export interfaces to downstream packages in the ament buildsystem in CMake.
The ability to export interfaces to downstream packages in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_export_include_directories |
The ability to export include directories to downstream packages in the ament buildsystem in CMake.
The ability to export include directories to downstream packages in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_export_dependencies |
The ability to export dependencies to downstream packages in the ament buildsystem in CMake.
The ability to export dependencies to downstream packages in the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake_export_definitions |
The ability to export definitions to downstream packages in the ament buildsystem.
The ability to export definitions to downstream packages in the ament buildsystem.
|
|
| 1 | 2018-07-17 | ament_cmake_core |
The core of the ament buildsystem in CMake.
Several subcomponents provide specific funtionalities:
* environment: provide prefix-level setup files
* environment_hooks: provide package-level setup files and environment hooks
* index: store information in an index and retrieve them without crawling
* package_templates: templates from the ament_package Python package
* symlink_install: use symlinks for CMake install commands
The core of the ament buildsystem in CMake.
Several subcomponents provide specific funtionalities:
* environment: provide prefix-level setup files
* environment_hooks: provide package-level setup files and environment hooks
* index: store information in an index and retrieve them without crawling
* package_templates: templates from the ament_package Python package
* symlink_install: use symlinks for CMake install commands
|
|
| 1 | 2018-07-17 | ament_cmake_auto |
The auto-magic functions for ease to use of the ament buildsystem in CMake.
The auto-magic functions for ease to use of the ament buildsystem in CMake.
|
|
| 1 | 2018-07-17 | ament_cmake |
The entry point package for the ament buildsystem in CMake.
The entry point package for the ament buildsystem in CMake.
|
|
| 1 | 2018-06-29 | rmw_opensplice_cpp |
Implement the ROS middleware interface using PrismTech OpenSplice static code generation in C++.
Implement the ROS middleware interface using PrismTech OpenSplice static code generation in C++.
|
|
| 1 | 2018-06-29 | astra_camera |
Drivers for Orbbec Astra Devices.
Drivers for Orbbec Astra Devices.
|
|
| 2 | 2018-06-28 | urdfdom |
A library to access URDFs using the DOM model.
A library to access URDFs using the DOM model.
|
|
| 2 | 2018-06-28 | uncrustify_vendor |
Package a newer version of uncrustify (0.61+, b6593c1, April 14th 2015).
Package a newer version of uncrustify (0.61+, b6593c1, April 14th 2015).
|
|
| 1 | 2018-06-28 | sros2 |
Command line tools for managing SROS2 keys
Command line tools for managing SROS2 keys
|
|
| 1 | 2018-06-28 | rosidl_typesupport_introspection_cpp |
Generate the message type support for dynamic message construction in C++.
Generate the message type support for dynamic message construction in C++.
|
|
| 1 | 2018-06-28 | rosidl_typesupport_introspection_c |
Generate the message type support for dynamic message construction in C.
Generate the message type support for dynamic message construction in C.
|
|
| 1 | 2018-06-28 | rosidl_typesupport_interface |
The interface for rosidl typesupport packages.
The interface for rosidl typesupport packages.
|
|
| 1 | 2018-06-28 | rosidl_typesupport_connext_cpp |
Generate the C++ interfaces for RTI Connext.
Generate the C++ interfaces for RTI Connext.
|
|
| 1 | 2018-06-28 | rosidl_typesupport_connext_c |
Generate the C interfaces for RTI Connext.
Generate the C interfaces for RTI Connext.
|
|
| 1 | 2018-06-28 | rosidl_parser |
The parser for ROS interface files.
The parser for ROS interface files.
|
|
| 1 | 2018-06-28 | rosidl_generator_cpp |
Generate the ROS interfaces in C++.
Generate the ROS interfaces in C++.
|
|
| 1 | 2018-06-28 | rosidl_generator_c |
Generate the ROS interfaces in C.
Generate the ROS interfaces in C.
|
|
| 1 | 2018-06-28 | rosidl_cmake |
The CMake functionality to invoke code generation for ROS interface files.
The CMake functionality to invoke code generation for ROS interface files.
|
|
| 1 | 2018-06-28 | rmw_fastrtps_cpp |
Implement the ROS middleware interface using eProsima FastRTPS static code generation in C++.
Implement the ROS middleware interface using eProsima FastRTPS static code generation in C++.
|
|
| 1 | 2018-06-28 | rmw_connext_shared_cpp |
C++ types and functions shared by the ROS middleware interface to RTI Connext Static and RTI Connext Dynamic.
C++ types and functions shared by the ROS middleware interface to RTI Connext Static and RTI Connext Dynamic.
|
|
| 1 | 2018-06-28 | rmw_connext_cpp |
Implement the ROS middleware interface using RTI Connext static code generation in C++.
Implement the ROS middleware interface using RTI Connext static code generation in C++.
|
|
| 1 | 2018-06-28 | rcutils |
Package containing various utility types and functions for C
Package containing various utility types and functions for C
|
|
| 1 | 2018-06-28 | rclcpp_lifecycle |
Package containing a prototype for lifecycle implementation
Package containing a prototype for lifecycle implementation
|
|
| 1 | 2018-06-28 | rclcpp |
The ROS client library in C++.
The ROS client library in C++.
|
|
| 3 | 2018-06-28 | orocos_kdl |
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 2 | 2018-06-28 | map_server |
map_server provides the
map_server provides the
|
|
| 2 | 2018-06-28 | fastrtps_cmake_module |
Provide CMake module to find eProsima FastRTPS.
Provide CMake module to find eProsima FastRTPS.
|
|
| 2 | 2018-06-28 | depthimage_to_laserscan |
depthimage_to_laserscan
depthimage_to_laserscan
|
|
| 1 | 2018-06-28 | connext_cmake_module |
Provide CMake module to find RTI Connext.
Provide CMake module to find RTI Connext.
|
|
| 2 | 2018-06-28 | cartographer_ros_msgs |
ROS messages for the cartographer_ros package.
ROS messages for the cartographer_ros package.
|
|
| 2 | 2018-06-28 | cartographer_ros |
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations. This package provides Cartographer's ROS integration.
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations. This package provides Cartographer's ROS integration.
|
|
| 1 | 2018-06-28 | ament_uncrustify |
The ability to check code against style conventions using uncrustify
and generate xUnit test result files.
The ability to check code against style conventions using uncrustify
and generate xUnit test result files.
|
|
| 1 | 2018-06-28 | ament_pyflakes |
The ability to check code using pyflakes and generate xUnit test
result files.
The ability to check code using pyflakes and generate xUnit test
result files.
|
|
| 1 | 2018-06-28 | ament_pep8 |
The ability to check code against the style conventions in PEP 8 and
generate xUnit test result files.
The ability to check code against the style conventions in PEP 8 and
generate xUnit test result files.
|
|
| 1 | 2018-06-28 | ament_pep257 |
The ability to check code against the style conventions in PEP 8 and
generate xUnit test result files.
The ability to check code against the style conventions in PEP 8 and
generate xUnit test result files.
|
|
| 1 | 2018-06-28 | ament_pclint |
The ability to perform static code analysis on C/C++ code using pclint
and generate xUnit test result files.
The ability to perform static code analysis on C/C++ code using pclint
and generate xUnit test result files.
|
|
| 1 | 2018-06-28 | ament_lint_common |
The list of commonly used linters in the ament buildsytem in CMake.
The list of commonly used linters in the ament buildsytem in CMake.
|
|
| 1 | 2018-06-28 | ament_lint_cmake |
The ability to lint CMake code using cmakelint and generate xUnit test
result files.
The ability to lint CMake code using cmakelint and generate xUnit test
result files.
|
|
| 1 | 2018-06-28 | ament_lint_auto |
The auto-magic functions for ease to use of the ament linters in CMake.
The auto-magic functions for ease to use of the ament linters in CMake.
|
|
| 1 | 2018-06-28 | ament_flake8 |
The ability to check code for style and syntax conventions with flake8.
The ability to check code for style and syntax conventions with flake8.
|
|
| 1 | 2018-06-28 | ament_cpplint |
The ability to check code against the Google style conventions using
cpplint and generate xUnit test result files.
The ability to check code against the Google style conventions using
cpplint and generate xUnit test result files.
|
|
| 1 | 2018-06-28 | ament_cppcheck |
The ability to perform static code analysis on C/C++ code using Cppcheck
and generate xUnit test result files.
The ability to perform static code analysis on C/C++ code using Cppcheck
and generate xUnit test result files.
|
|
| 1 | 2018-06-28 | ament_copyright |
The ability to check source files for copyright and license
information.
The ability to check source files for copyright and license
information.
|
|
| 1 | 2018-06-28 | ament_cmake_uncrustify |
The CMake API for ament_uncrustify to check code against styleconventions
using uncrustify.
The CMake API for ament_uncrustify to check code against styleconventions
using uncrustify.
|
|
| 1 | 2018-06-28 | ament_cmake_pyflakes |
The CMake API for ament_pyflakes to check code using pyflakes.
The CMake API for ament_pyflakes to check code using pyflakes.
|
|
| 1 | 2018-06-28 | ament_cmake_pep8 |
The CMake API for ament_pep8 to check code against the style conventions in
PEP 8.
The CMake API for ament_pep8 to check code against the style conventions in
PEP 8.
|
|
| 1 | 2018-06-28 | ament_cmake_pep257 |
The CMake API for ament_pep257 to check code against the style conventions in
PEP 257.
The CMake API for ament_pep257 to check code against the style conventions in
PEP 257.
|
|
| 1 | 2018-06-28 | ament_cmake_pclint |
The CMake API for ament_pclint to perform static code analysis on C/C++
code using PCLint.
The CMake API for ament_pclint to perform static code analysis on C/C++
code using PCLint.
|
|
| 1 | 2018-06-28 | ament_cmake_lint_cmake |
The CMake API for ament_lint_cmake to lint CMake code using cmakelint.
The CMake API for ament_lint_cmake to lint CMake code using cmakelint.
|
|
| 1 | 2018-06-28 | ament_cmake_flake8 |
The CMake API for ament_flake8 to check code syntax and style conventions
with flake8.
The CMake API for ament_flake8 to check code syntax and style conventions
with flake8.
|
|
| 1 | 2018-06-28 | ament_cmake_cpplint |
The CMake API for ament_cpplint to lint C / C++ code using cpplint.
The CMake API for ament_cpplint to lint C / C++ code using cpplint.
|
|
| 1 | 2018-06-28 | ament_cmake_cppcheck |
The CMake API for ament_cppcheck to perform static code analysis on C/C++
code using Cppcheck.
The CMake API for ament_cppcheck to perform static code analysis on C/C++
code using Cppcheck.
|
|
| 1 | 2018-06-28 | ament_cmake_copyright |
The CMake API for ament_copyright to check every source file contains copyright reference.
The CMake API for ament_copyright to check every source file contains copyright reference.
|
|
| 1 | 2018-06-28 | ament_cmake_clang_format |
The CMake API for ament_clang_format to lint C / C++ code using clang format.
The CMake API for ament_clang_format to lint C / C++ code using clang format.
|
|
| 1 | 2018-06-28 | ament_clang_format |
The ability to check code against style conventions using
clang-format and generate xUnit test result files.
The ability to check code against style conventions using
clang-format and generate xUnit test result files.
|
|
| 2 | 2018-06-28 | amcl |
|
|
| 1 | 2018-06-27 | tlsf_cpp |
C++ stdlib-compatible wrapper around tlsf allocator and ROS2 examples
C++ stdlib-compatible wrapper around tlsf allocator and ROS2 examples
|
|
| 1 | 2018-06-27 | rttest |
Instrumentation library for real-time performance testing
Instrumentation library for real-time performance testing
|
|
| 2 | 2018-06-27 | robot_state_publisher |
ROS2 version of the robot_state_publisher package
ROS2 version of the robot_state_publisher package
|
|
| 1 | 2018-06-27 | examples_rclpy_minimal_subscriber |
Examples of minimal subscribers using rclpy.
Examples of minimal subscribers using rclpy.
|
|
| 1 | 2018-06-27 | examples_rclpy_minimal_service |
Examples of minimal service servers using rclpy.
Examples of minimal service servers using rclpy.
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 1 | 2024-11-25 | behaviortree_cpp |
This package provides the Behavior Trees core library.
This package provides the Behavior Trees core library.
|
|
| 4 | 2024-07-07 | apriltag_ros |
AprilTag detection node
AprilTag detection node
|
|
| 1 | 2024-05-25 | nmea_msgs |
The nmea_msgs package contains messages related to data in the NMEA format.
The nmea_msgs package contains messages related to data in the NMEA format.
|
|
| 2 | 2024-04-26 | map_msgs |
This package defines messages commonly used in mapping packages.
This package defines messages commonly used in mapping packages.
|
|
| 2 | 2024-03-25 | object_msgs |
This package defines messages for NCS inference
This package defines messages for NCS inference
|
|
| 2 | 2024-03-15 | cartographer |
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations.
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations.
|
|
| 2 | 2024-01-08 | depthimage_to_laserscan |
depthimage_to_laserscan
depthimage_to_laserscan
|
|
| 1 | 2023-10-26 | eigen_stl_containers |
This package provides a set of typedef's that allow
using Eigen datatypes in STL containers
This package provides a set of typedef's that allow
using Eigen datatypes in STL containers
|
|
| 1 | 2023-03-22 | angles |
This package provides a set of simple math utilities to work
with angles. The utilities cover simple things like
normalizing an angle and conversion between degrees and
radians. But even if you're trying to calculate things like
the shortest angular distance between two joint space
positions of your robot, but the joint motion is constrained
by joint limits, this package is what you need. The code in
this package is stable and well tested. There are no plans for
major changes in the near future.
This package provides a set of simple math utilities to work
with angles. The utilities cover simple things like
normalizing an angle and conversion between degrees and
radians. But even if you're trying to calculate things like
the shortest angular distance between two joint space
positions of your robot, but the joint motion is constrained
by joint limits, this package is what you need. The code in
this package is stable and well tested. There are no plans for
major changes in the near future.
|
|
| 1 | 2023-03-16 | rqt_action |
rqt_action provides a feature to introspect all available ROS
action types. By utilizing rqt_msg, the output format is
unified with it and rqt_srv. Note that the actions shown on this plugin
is the ones that are stored on your machine, not on the ROS core your rqt
instance connects to.
rqt_action provides a feature to introspect all available ROS
action types. By utilizing rqt_msg, the output format is
unified with it and rqt_srv. Note that the actions shown on this plugin
is the ones that are stored on your machine, not on the ROS core your rqt
instance connects to.
|
|
| 1 | 2023-01-07 | realsense_ros2_camera |
The realsense_ros2_camera package
The realsense_ros2_camera package
|
|
| 1 | 2023-01-07 | realsense_camera_msgs |
A package containing realsense camera messages definitions.
A package containing realsense camera messages definitions.
|
|
| 1 | 2021-08-31 | rqt_top |
RQT plugin for monitoring ROS processes.
RQT plugin for monitoring ROS processes.
|
|
| 1 | 2021-08-31 | rqt_srv |
A Python GUI plugin for introspecting available ROS message types.
Note that the srvs available through this plugin is the ones that are stored
on your machine, not on the ROS core your rqt instance connects to.
A Python GUI plugin for introspecting available ROS message types.
Note that the srvs available through this plugin is the ones that are stored
on your machine, not on the ROS core your rqt instance connects to.
|
|
| 1 | 2021-08-31 | rqt_shell |
rqt_shell is a Python GUI plugin providing an interactive shell.
rqt_shell is a Python GUI plugin providing an interactive shell.
|
|
| 1 | 2021-08-31 | rqt_service_caller |
rqt_service_caller provides a GUI plugin for calling arbitrary services.
rqt_service_caller provides a GUI plugin for calling arbitrary services.
|
|
| 1 | 2021-08-31 | rqt_py_console |
rqt_py_console is a Python GUI plugin providing an interactive Python console.
rqt_py_console is a Python GUI plugin providing an interactive Python console.
|
|
| 1 | 2021-08-31 | rqt_py_common |
rqt_py_common provides common functionality for rqt plugins written in Python.
Despite no plugin is provided, this package is part of the rqt_common_plugins
repository to keep refactoring generic functionality from these common plugins
into this package as easy as possible.
Functionality included in this package should cover generic ROS concepts and
should not introduce any special dependencies beside "ros_base".
rqt_py_common provides common functionality for rqt plugins written in Python.
Despite no plugin is provided, this package is part of the rqt_common_plugins
repository to keep refactoring generic functionality from these common plugins
into this package as easy as possible.
Functionality included in this package should cover generic ROS concepts and
should not introduce any special dependencies beside "ros_base".
|
|
| 1 | 2021-08-31 | rqt_gui_py |
rqt_gui_py enables GUI plugins to use the Python client library for ROS.
rqt_gui_py enables GUI plugins to use the Python client library for ROS.
|
|
| 1 | 2021-08-31 | rqt_gui_cpp |
rqt_gui_cpp enables GUI plugins to use the C++ client library for ROS.
rqt_gui_cpp enables GUI plugins to use the C++ client library for ROS.
|
|
| 1 | 2021-08-31 | rqt_gui |
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui.
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui.
|
|
| 1 | 2021-08-31 | rqt |
rqt is a Qt-based framework for GUI development for ROS. It consists of three parts/metapackages
rqt is a Qt-based framework for GUI development for ROS. It consists of three parts/metapackages
|
|
| 1 | 2021-05-30 | xacro |
Xacro (XML Macros)
Xacro is an XML macro language. With xacro, you can construct shorter and more readable XML files by using macros that expand to larger XML expressions.
Xacro (XML Macros)
Xacro is an XML macro language. With xacro, you can construct shorter and more readable XML files by using macros that expand to larger XML expressions.
|
|
| 1 | 2021-02-12 | python_qt_binding |
This stack provides Python bindings for Qt.
There are two providers: pyside and pyqt. PySide2 is available under
the GPL, LGPL and a commercial license. PyQt is released under the GPL.
Both the bindings and tools to build bindings are included from each
available provider. For PySide, it is called "Shiboken". For PyQt,
this is called "SIP".
Also provided is adapter code to make the user's Python code
independent of which binding provider was actually used which makes
it very easy to switch between these.
This stack provides Python bindings for Qt.
There are two providers: pyside and pyqt. PySide2 is available under
the GPL, LGPL and a commercial license. PyQt is released under the GPL.
Both the bindings and tools to build bindings are included from each
available provider. For PySide, it is called "Shiboken". For PyQt,
this is called "SIP".
Also provided is adapter code to make the user's Python code
independent of which binding provider was actually used which makes
it very easy to switch between these.
|
|
| 1 | 2020-10-29 | qt_gui_py_common |
qt_gui_py_common provides common functionality for GUI plugins written in Python.
qt_gui_py_common provides common functionality for GUI plugins written in Python.
|
|
| 1 | 2020-10-29 | qt_gui_cpp |
qt_gui_cpp provides the foundation for C++-bindings for qt_gui and creates bindings for every generator available.
At least one specific binding must be available in order to use C++-plugins.
qt_gui_cpp provides the foundation for C++-bindings for qt_gui and creates bindings for every generator available.
At least one specific binding must be available in order to use C++-plugins.
|
|
| 1 | 2020-10-29 | qt_gui_core |
Integration of the ROS package system and ROS-specific plugins for a Qt-based GUI.
Integration of the ROS package system and ROS-specific plugins for a Qt-based GUI.
|
|
| 1 | 2020-10-29 | qt_gui_app |
qt_gui_app provides the main to start an instance of the integrated graphical user interface provided by qt_gui.
qt_gui_app provides the main to start an instance of the integrated graphical user interface provided by qt_gui.
|
|
| 1 | 2020-10-29 | qt_gui |
qt_gui provides the infrastructure for an integrated graphical user interface based on Qt.
It is extensible with Python- and C++-based plugins (implemented in separate packages) which can contribute arbitrary widgets.
It requires either PyQt or PySide bindings.
qt_gui provides the infrastructure for an integrated graphical user interface based on Qt.
It is extensible with Python- and C++-based plugins (implemented in separate packages) which can contribute arbitrary widgets.
It requires either PyQt or PySide bindings.
|
|
| 1 | 2020-10-29 | qt_dotgraph |
qt_dotgraph provides helpers to work with dot graphs.
qt_dotgraph provides helpers to work with dot graphs.
|
|
| 1 | 2020-10-28 | rqt_image_view |
rqt_image_view provides a GUI plugin for displaying images using image_transport.
rqt_image_view provides a GUI plugin for displaying images using image_transport.
|
|
| 1 | 2020-10-16 | rqt_plot |
rqt_plot provides a GUI plugin visualizing numeric values in a 2D plot using different plotting backends.
rqt_plot provides a GUI plugin visualizing numeric values in a 2D plot using different plotting backends.
|
|
| 1 | 2020-07-30 | rqt_graph |
rqt_graph provides a GUI plugin for visualizing the ROS
computation graph.
rqt_graph provides a GUI plugin for visualizing the ROS
computation graph.
|
|
| 1 | 2020-01-10 | test_ament_virtualenv |
Package to test ament_virtualenv.
Package to test ament_virtualenv.
|
|
| 1 | 2020-01-10 | test_ament_cmake_virtualenv |
Package to test ament_cmake_virtualenv
Package to test ament_cmake_virtualenv
|
|
| 1 | 2020-01-10 | ament_virtualenv |
Bundle python requirements in a ament package via virtualenv.
Bundle python requirements in a ament package via virtualenv.
|
|
| 1 | 2020-01-10 | ament_cmake_virtualenv |
Bundle python requirements in a ament package via virtualenv.
Bundle python requirements in a ament package via virtualenv.
|
|
| 1 | 2019-12-06 | rviz_visual_testing_framework |
3D testing framework for RViz.
3D testing framework for RViz.
|
|
| 1 | 2019-12-06 | rviz_rendering_tests |
Example plugin for RViz - documents and tests RViz plugin development
Example plugin for RViz - documents and tests RViz plugin development
|
|
| 1 | 2019-12-06 | rviz_rendering |
Library which provides the 3D rendering functionality in rviz.
Library which provides the 3D rendering functionality in rviz.
|
|
| 1 | 2019-12-06 | rviz_ogre_vendor |
Wrapper around ogre3d, it provides a fixed CMake module and an ExternalProject build of ogre.
Wrapper around ogre3d, it provides a fixed CMake module and an ExternalProject build of ogre.
|
|
| 1 | 2019-12-06 | rviz_default_plugins |
Several default plugins for rviz to cover the basic functionality.
Several default plugins for rviz to cover the basic functionality.
|
|
| 1 | 2019-12-06 | rviz_common |
Common rviz API, used by rviz plugins and applications.
Common rviz API, used by rviz plugins and applications.
|
|
| 1 | 2019-12-06 | rviz_assimp_vendor |
Wrapper around assimp, providing nothing but a dependency on assimp, on some systems.
On others, it provides a fixed CMake module or even an ExternalProject build of assimp.
Wrapper around assimp, providing nothing but a dependency on assimp, on some systems.
On others, it provides a fixed CMake module or even an ExternalProject build of assimp.
|
|
| 1 | 2019-12-06 | rviz2 |
3D visualization tool for ROS.
3D visualization tool for ROS.
|
|
| 1 | 2019-12-05 | rclpy |
Package containing the Python client.
Package containing the Python client.
|
|
| 1 | 2019-12-05 | rclcpp_lifecycle |
Package containing a prototype for lifecycle implementation
Package containing a prototype for lifecycle implementation
|
|
| 1 | 2019-12-05 | rclcpp_action |
Adds action APIs for C++.
Adds action APIs for C++.
|
|
| 1 | 2019-12-05 | rclcpp |
The ROS client library in C++.
The ROS client library in C++.
|
|
| 1 | 2019-11-27 | control_msgs |
control_msgs contains base messages and actions useful for
controlling robots. It provides representations for controller
setpoints and joint and cartesian trajectories.
control_msgs contains base messages and actions useful for
controlling robots. It provides representations for controller
setpoints and joint and cartesian trajectories.
|
|
| 3 | 2019-11-20 | ml_classifiers |
ml_classifiers
ml_classifiers
|
|
| 1 | 2019-10-21 | sros2_cmake |
Cmake macros to configure security for nodes
Cmake macros to configure security for nodes
|
|
| 1 | 2019-10-21 | sros2 |
Command line tools for managing SROS2 keys
Command line tools for managing SROS2 keys
|
|
| 1 | 2019-09-16 | object_analytics_rviz |
Display object analytics result in rviz
Display object analytics result in rviz
|
|
| 1 | 2019-09-16 | object_analytics_node |
The object_analytics_node package
The object_analytics_node package
|
|
| 1 | 2019-09-16 | object_analytics_msgs |
object analytics message definition
object analytics message definition
|
|
| 2 | 2019-08-17 | rosidl_typesupport_opensplice_cpp |
Generate the C++ interfaces for PrismTech OpenSplice.
Generate the C++ interfaces for PrismTech OpenSplice.
|
|
| 2 | 2019-08-17 | rosidl_typesupport_opensplice_c |
Generate the C interfaces for PrismTech OpenSplice.
Generate the C interfaces for PrismTech OpenSplice.
|
|
| 1 | 2019-08-17 | rcl_yaml_param_parser |
Package containing various utility types and functions for C
Package containing various utility types and functions for C
|
|
| 1 | 2019-08-17 | rcl_lifecycle |
Package containing a C-based lifecycle implementation
Package containing a C-based lifecycle implementation
|
|
| 1 | 2019-08-17 | rcl_action |
Package containing a C-based ROS action implementation
Package containing a C-based ROS action implementation
|
|
| 1 | 2019-08-17 | rcl |
The ROS client library common implementation.
This package contains an API which builds on the ROS middleware API and is optionally built upon by the other ROS client libraries.
The ROS client library common implementation.
This package contains an API which builds on the ROS middleware API and is optionally built upon by the other ROS client libraries.
|
|
| 2 | 2019-08-17 | opensplice_cmake_module |
Provide CMake module to find PrismTech OpenSplice.
Provide CMake module to find PrismTech OpenSplice.
|
|
| 1 | 2019-08-06 | py_trees |
Pythonic implementation of behaviour trees.
Pythonic implementation of behaviour trees.
|
|
| 1 | 2019-07-01 | theora_image_transport |
Theora_image_transport provides a plugin to image_transport for
transparently sending an image stream encoded with the Theora codec.
Theora_image_transport provides a plugin to image_transport for
transparently sending an image stream encoded with the Theora codec.
|
|
| 1 | 2019-07-01 | image_transport_plugins |
A set of plugins for publishing and subscribing to sensor_msgs/Image topics
in representations other than raw pixel data. For example, for viewing a
stream of images off-robot, a video codec will give much lower bandwidth
and latency. For low frame rate tranport of high-definition images, you
might prefer sending them as JPEG or PNG-compressed form.
A set of plugins for publishing and subscribing to sensor_msgs/Image topics
in representations other than raw pixel data. For example, for viewing a
stream of images off-robot, a video codec will give much lower bandwidth
and latency. For low frame rate tranport of high-definition images, you
might prefer sending them as JPEG or PNG-compressed form.
|
|
| 1 | 2019-07-01 | compressed_image_transport |
Compressed_image_transport provides a plugin to image_transport for transparently sending images
encoded as JPEG or PNG.
Compressed_image_transport provides a plugin to image_transport for transparently sending images
encoded as JPEG or PNG.
|
|
| 1 | 2019-07-01 | compressed_depth_image_transport |
Compressed_depth_image_transport provides a plugin to image_transport for transparently sending
depth images (raw, floating-point) using PNG compression.
Compressed_depth_image_transport provides a plugin to image_transport for transparently sending
depth images (raw, floating-point) using PNG compression.
|
|
| 1 | 2019-06-16 | py_trees_ros_interfaces |
Interfaces used by py_trees_ros and py_trees_ros_tutorials.
Interfaces used by py_trees_ros and py_trees_ros_tutorials.
|
|
| 1 | 2019-06-09 | ets_plugin |
ETS2/ATS plugin to publish telemetry information using ROS2
ETS2/ATS plugin to publish telemetry information using ROS2
|
|
| 1 | 2019-06-09 | ets_msgs |
Messages definition for ETS2/ATS telemetry and configuration data
Messages definition for ETS2/ATS telemetry and configuration data
|
|
| 1 | 2019-06-09 | ets_cpp_client |
ETS2/ATS sample client
ETS2/ATS sample client
|
|
| 1 | 2019-05-29 | rqt_publisher |
rqt_publisher provides a GUI plugin for publishing arbitrary messages with fixed or computed field values.
rqt_publisher provides a GUI plugin for publishing arbitrary messages with fixed or computed field values.
|
|
| 2 | 2019-05-21 | joy |
ROS2 driver for a generic Linux joystick.
Will contain a MacOS and Windows version later.
The joy package contains joy_node, a node that interfaces a
generic Linux joystick to ROS2. This node publishes a "Joy"
message, which contains the current state of each one of the
joystick's buttons and axes.
ROS2 driver for a generic Linux joystick.
Will contain a MacOS and Windows version later.
The joy package contains joy_node, a node that interfaces a
generic Linux joystick to ROS2. This node publishes a "Joy"
message, which contains the current state of each one of the
joystick's buttons and axes.
|
|
| 1 | 2019-05-20 | ros1_bridge |
A simple bridge between ROS 1 and ROS 2
A simple bridge between ROS 1 and ROS 2
|
|
| 1 | 2019-05-09 | rqt_msg |
A Python GUI plugin for introspecting available ROS message types.
Note that the msgs available through this plugin is the ones that are stored
on your machine, not on the ROS core your rqt instance connects to.
A Python GUI plugin for introspecting available ROS message types.
Note that the msgs available through this plugin is the ones that are stored
on your machine, not on the ROS core your rqt instance connects to.
|
|
| 1 | 2019-05-03 | keystroke |
Capture keyboard input from the local computer and publish it to ROS
Capture keyboard input from the local computer and publish it to ROS
|
|
| 1 | 2019-04-24 | microxrcedds_agent_cmake_module |
Provide CMake module to find eProsima Micro XRCE-DDS Agent
Provide CMake module to find eProsima Micro XRCE-DDS Agent
|
|
| 1 | 2019-04-24 | micro_ros_agent |
DDS-XCRE agent implementation
DDS-XCRE agent implementation
|
|
| 1 | 2019-04-08 | sqlite3_vendor |
SQLite 3 vendor package
SQLite 3 vendor package
|
|
| 1 | 2019-04-08 | shared_queues_vendor |
Vendor package for concurrent queues from moodycamel
Vendor package for concurrent queues from moodycamel
|
|
| 1 | 2019-04-08 | rosbag2_transport |
Layer encapsulating ROS middleware to allow rosbag2 to be used with or without middleware
Layer encapsulating ROS middleware to allow rosbag2 to be used with or without middleware
|
|
| 1 | 2019-04-08 | rosbag2_tests |
Tests package for rosbag2
Tests package for rosbag2
|
|
| 1 | 2019-04-08 | rosbag2_test_common |
Commonly used test helper classes and fixtures for rosbag2
Commonly used test helper classes and fixtures for rosbag2
|
|
| 1 | 2019-04-08 | rosbag2_storage_default_plugins |
ROSBag2 SQLite3 storage plugin
ROSBag2 SQLite3 storage plugin
|
|
| 1 | 2019-04-08 | rosbag2_storage |
ROS2 independent storage format to store serialized ROS2 messages
ROS2 independent storage format to store serialized ROS2 messages
|
|
| 1 | 2019-04-08 | rosbag2_converter_default_plugins |
Package containing default plugins for format converters
Package containing default plugins for format converters
|
|
| 2 | 2019-04-08 | rosbag2_bag_v2_plugins |
Package containing storage and converter plugins for rosbag 1
Package containing storage and converter plugins for rosbag 1
|
|
| 1 | 2019-04-08 | rosbag2 |
ROSBag2 client library
ROSBag2 client library
|
|
| 1 | 2019-04-08 | ros2bag |
Entry point for rosbag in ROS 2
Entry point for rosbag in ROS 2
|
|
| 2 | 2019-04-08 | ros1_rosbag_storage_vendor |
Vendor package for rosbag_storage of ROS1
Vendor package for rosbag_storage of ROS1
|
|
| 1 | 2019-04-03 | gazebo_ros_pkgs |
Interface for using ROS with the
Interface for using ROS with the
|
|
| 1 | 2019-04-03 | gazebo_ros |
Utilities to interface with
Utilities to interface with
|
|
| 1 | 2019-04-03 | gazebo_plugins |
Robot-independent Gazebo plugins for sensors, motors and dynamic reconfigurable components.
Robot-independent Gazebo plugins for sensors, motors and dynamic reconfigurable components.
|
|
| 1 | 2019-04-03 | gazebo_msgs |
Message and service data structures for interacting with Gazebo from ROS2.
Message and service data structures for interacting with Gazebo from ROS2.
|
|
| 1 | 2019-04-03 | gazebo_dev |
Provides a cmake config for the default version of Gazebo for the ROS distribution.
Provides a cmake config for the default version of Gazebo for the ROS distribution.
|
|
| 2 | 2019-04-02 | test_launch_ros |
Tests for ROS specific extensions to the launch tool.
Tests for ROS specific extensions to the launch tool.
|
|
| 2 | 2019-04-02 | ros2launch |
The launch command for ROS 2 command line tools.
The launch command for ROS 2 command line tools.
|
|
| 1 | 2019-04-02 | launch_testing |
Helper scripts for tests that use the ROS launch tool.
Helper scripts for tests that use the ROS launch tool.
|
|
| 2 | 2019-04-02 | launch_ros |
ROS specific extensions to the launch tool.
ROS specific extensions to the launch tool.
|
|
| 1 | 2019-04-02 | launch |
The ROS launch tool.
The ROS launch tool.
|
|
| 1 | 2019-03-27 | rmw_fastrtps_shared_cpp |
Code shared on static and dynamic type support of rmw_fastrtps_cpp.
Code shared on static and dynamic type support of rmw_fastrtps_cpp.
|
|
| 1 | 2019-03-27 | rmw_fastrtps_dynamic_cpp |
Implement the ROS middleware interface using eProsima FastRTPS static code generation in C++.
Implement the ROS middleware interface using eProsima FastRTPS static code generation in C++.
|
|
| 1 | 2019-03-27 | rmw_fastrtps_cpp |
Implement the ROS middleware interface using eProsima FastRTPS static code generation in C++.
Implement the ROS middleware interface using eProsima FastRTPS static code generation in C++.
|
|
| 1 | 2019-03-20 | ros_environment |
The package provides the environment variables `ROS_VERSION` and `ROS_DISTRO`.
The package provides the environment variables `ROS_VERSION` and `ROS_DISTRO`.
|
|
| 2 | 2019-03-18 | system_modes_examples |
Simple example system for system_modes package.
Simple example system for system_modes package.
|
|
| 2 | 2019-03-18 | system_modes |
Model-based distributed configuration handling.
Model-based distributed configuration handling.
|
|
| 1 | 2019-03-13 | navigation2 |
ROS2 Navigation Stack
ROS2 Navigation Stack
|
|
| 2 | 2019-03-13 | nav_2d_utils |
A handful of useful utility functions for nav_2d packages.
A handful of useful utility functions for nav_2d packages.
|
|
| 2 | 2019-03-13 | nav_2d_msgs |
Basic message types for two dimensional navigation, extending from geometry_msgs::Pose2D.
Basic message types for two dimensional navigation, extending from geometry_msgs::Pose2D.
|
|
| 1 | 2019-03-13 | nav2_world_model |
TODO
TODO
|
|
| 1 | 2019-03-13 | nav2_voxel_grid |
voxel_grid provides an implementation of an efficient 3D voxel grid. The occupancy grid can support 3 different representations for the state of a cell: marked, free, or unknown. Due to the underlying implementation relying on bitwise and and or integer operations, the voxel grid only supports 16 different levels per voxel column. However, this limitation yields raytracing and cell marking performance in the grid comparable to standard 2D structures making it quite fast compared to most 3D structures.
voxel_grid provides an implementation of an efficient 3D voxel grid. The occupancy grid can support 3 different representations for the state of a cell: marked, free, or unknown. Due to the underlying implementation relying on bitwise and and or integer operations, the voxel grid only supports 16 different levels per voxel column. However, this limitation yields raytracing and cell marking performance in the grid comparable to standard 2D structures making it quite fast compared to most 3D structures.
|
|
| 1 | 2019-03-13 | nav2_util |
TODO
TODO
|
|
| 1 | 2019-03-13 | nav2_tasks |
TODO
TODO
|
|
| 1 | 2019-03-13 | nav2_system_tests |
TODO
TODO
|
|
| 1 | 2019-03-13 | nav2_simple_navigator |
TODO
TODO
|
|
| 1 | 2019-03-13 | nav2_robot |
TODO
TODO
|
|
| 1 | 2019-03-13 | nav2_navfn_planner |
TODO
TODO
|
|
| 1 | 2019-03-13 | nav2_msgs |
Messages and service files for the navigation2 stack
Messages and service files for the navigation2 stack
|
|
| 1 | 2019-03-13 | nav2_motion_primitives |
TODO
TODO
|
|
| 1 | 2019-03-13 | nav2_mission_executor |
TODO
TODO
|
|
| 1 | 2019-03-13 | nav2_map_server |
Refactored map server for ROS2 Navigation
Refactored map server for ROS2 Navigation
|
|
| 1 | 2019-03-13 | nav2_dynamic_params |
This package provides a validation class for ROS2 parameters with validation based on parameter
type and defined bounds. Support for custom validation callbacks is also provided. Some useful
convenience functions for event callbacks are also provided
This package provides a validation class for ROS2 parameters with validation based on parameter
type and defined bounds. Support for custom validation callbacks is also provided. Some useful
convenience functions for event callbacks are also provided
|
|
| 1 | 2019-03-13 | nav2_dwb_controller |
ROS2 controller (DWB) metapackage
ROS2 controller (DWB) metapackage
|
|
| 1 | 2019-03-13 | nav2_costmap_2d |
This package provides an implementation of a 2D costmap that takes in sensor
data from the world, builds a 2D or 3D occupancy grid of the data (depending
on whether a voxel based implementation is used), and inflates costs in a
2D costmap based on the occupancy grid and a user specified inflation radius.
This package also provides support for map_server based initialization of a
costmap, rolling window based costmaps, and parameter based subscription to
and configuration of sensor topics.
This package provides an implementation of a 2D costmap that takes in sensor
data from the world, builds a 2D or 3D occupancy grid of the data (depending
on whether a voxel based implementation is used), and inflates costs in a
2D costmap based on the occupancy grid and a user specified inflation radius.
This package also provides support for map_server based initialization of a
costmap, rolling window based costmaps, and parameter based subscription to
and configuration of sensor topics.
|
|
| 1 | 2019-03-13 | nav2_common |
Common support functionality used throughout the navigation 2 stack
Common support functionality used throughout the navigation 2 stack
|
|
| 1 | 2019-03-13 | nav2_bt_navigator |
TODO
TODO
|
|
| 2 | 2019-03-13 | nav2_bringup |
Bringup scripts and configurations for the navigation2 stack
Bringup scripts and configurations for the navigation2 stack
|
|
| 1 | 2019-03-13 | nav2_amcl |
|
|
| 2 | 2019-03-13 | dwb_plugins |
Standard implementations of the GoalChecker
and TrajectoryGenerators for dwb_core
Standard implementations of the GoalChecker
and TrajectoryGenerators for dwb_core
|
|
| 2 | 2019-03-13 | dwb_msgs |
Message/Service definitions specifically for the dwb_core
Message/Service definitions specifically for the dwb_core
|
|
| 2 | 2019-03-13 | dwb_critics |
The dwb_critics package
The dwb_critics package
|
|
| 1 | 2019-03-13 | dwb_core |
TODO
TODO
|
|
| 1 | 2019-03-13 | dwb_controller |
TODO
TODO
|
|
| 2 | 2019-03-13 | costmap_queue |
The costmap_queue package
The costmap_queue package
|
|
| 1 | 2019-03-10 | test_msgs |
A package containing message definitions and fixtures used exclusively for testing purposes.
A package containing message definitions and fixtures used exclusively for testing purposes.
|
|
| 1 | 2019-03-10 | rosidl_typesupport_cpp |
Generate the type support for C++ messages.
Generate the type support for C++ messages.
|
|
| 1 | 2019-03-10 | rosidl_typesupport_c |
Generate the type support for C messages.
Generate the type support for C messages.
|
|
| 2 | 2019-03-10 | rosidl_generator_py |
Generate the ROS interfaces in Python.
Generate the ROS interfaces in Python.
|
|
| 3 | 2019-03-10 | rosgraph_msgs |
Messages relating to the ROS Computation Graph.
These are generally considered to be low-level messages that end users do not interact with.
Messages relating to the ROS Computation Graph.
These are generally considered to be low-level messages that end users do not interact with.
|
|
| 1 | 2019-03-10 | rcl_logging_noop |
An rcl logger implementation that doesn't do anything with log messages.
An rcl logger implementation that doesn't do anything with log messages.
|
|
| 1 | 2019-03-10 | rcl_logging_log4cxx |
C API providing common interface to a shared library wrapping 3rd party loggers.
C API providing common interface to a shared library wrapping 3rd party loggers.
|
|
| 1 | 2019-03-10 | rcl_interfaces |
The ROS client library common interfaces.
This package contains the messages and services which ROS client libraries will use under the hood to
communicate higher level concepts such as parameters.
The ROS client library common interfaces.
This package contains the messages and services which ROS client libraries will use under the hood to
communicate higher level concepts such as parameters.
|
|
| 3 | 2019-03-10 | python_cmake_module |
Provide CMake module with extra functionality for Python.
Provide CMake module with extra functionality for Python.
|
|
| 1 | 2019-03-10 | lifecycle_msgs |
A package containing some lifecycle related message and service definitions.
A package containing some lifecycle related message and service definitions.
|
|
| 1 | 2019-03-10 | examples_rclpy_minimal_subscriber |
Examples of minimal subscribers using rclpy.
Examples of minimal subscribers using rclpy.
|
|
| 1 | 2019-03-10 | examples_rclpy_minimal_service |
Examples of minimal service servers using rclpy.
Examples of minimal service servers using rclpy.
|
|
| 1 | 2019-03-10 | examples_rclpy_minimal_publisher |
Examples of minimal publishers using rclpy.
Examples of minimal publishers using rclpy.
|
|
| 1 | 2019-03-10 | examples_rclpy_minimal_client |
Examples of minimal service clients using rclpy.
Examples of minimal service clients using rclpy.
|
|
| 1 | 2019-03-10 | examples_rclpy_minimal_action_server |
Examples of minimal action servers using rclpy.
Examples of minimal action servers using rclpy.
|
|
| 1 | 2019-03-10 | examples_rclpy_minimal_action_client |
Examples of minimal action clients using rclpy.
Examples of minimal action clients using rclpy.
|
|
| 1 | 2019-03-10 | examples_rclpy_executors |
Examples of creating and using exectors to run multiple nodes in the same process
Examples of creating and using exectors to run multiple nodes in the same process
|
|
| 1 | 2019-03-10 | examples_rclcpp_minimal_timer |
Examples of minimal nodes which have timers
Examples of minimal nodes which have timers
|
|
| 1 | 2019-03-10 | examples_rclcpp_minimal_subscriber |
Examples of minimal subscribers
Examples of minimal subscribers
|
|
| 1 | 2019-03-10 | examples_rclcpp_minimal_service |
A minimal service server which adds two numbers
A minimal service server which adds two numbers
|
|
| 1 | 2019-03-10 | examples_rclcpp_minimal_publisher |
Examples of minimal publisher nodes
Examples of minimal publisher nodes
|
|
| 1 | 2019-03-10 | examples_rclcpp_minimal_composition |
Minimalist examples of composing nodes in the same
process
Minimalist examples of composing nodes in the same
process
|
|
| 1 | 2019-03-10 | examples_rclcpp_minimal_client |
Examples of minimal service clients
Examples of minimal service clients
|
|
| 1 | 2019-03-10 | examples_rclcpp_minimal_action_server |
Minimal action server examples
Minimal action server examples
|
|
| 1 | 2019-03-10 | examples_rclcpp_minimal_action_client |
Minimal action client examples
Minimal action client examples
|
|
| 1 | 2019-03-10 | builtin_interfaces |
A package containing builtin message and service definitions.
A package containing builtin message and service definitions.
|
|
| 1 | 2019-03-10 | ament_xmllint |
The ability to check XML files like the package manifest using xmllint
and generate xUnit test result files.
The ability to check XML files like the package manifest using xmllint
and generate xUnit test result files.
|
|
| 1 | 2019-03-10 | ament_uncrustify |
The ability to check code against style conventions using uncrustify
and generate xUnit test result files.
The ability to check code against style conventions using uncrustify
and generate xUnit test result files.
|
|
| 1 | 2019-03-10 | ament_pyflakes |
The ability to check code using pyflakes and generate xUnit test
result files.
The ability to check code using pyflakes and generate xUnit test
result files.
|
|
| 1 | 2019-03-10 | ament_pep8 |
The ability to check code against the style conventions in PEP 8 and
generate xUnit test result files.
The ability to check code against the style conventions in PEP 8 and
generate xUnit test result files.
|
|
| 1 | 2019-03-10 | ament_pep257 |
The ability to check code against the style conventions in PEP 8 and
generate xUnit test result files.
The ability to check code against the style conventions in PEP 8 and
generate xUnit test result files.
|
|
| 1 | 2019-03-10 | ament_pclint |
The ability to perform static code analysis on C/C++ code using pclint
and generate xUnit test result files.
The ability to perform static code analysis on C/C++ code using pclint
and generate xUnit test result files.
|
|
| 1 | 2019-03-10 | ament_lint_common |
The list of commonly used linters in the ament buildsytem in CMake.
The list of commonly used linters in the ament buildsytem in CMake.
|
|
| 1 | 2019-03-10 | ament_lint_cmake |
The ability to lint CMake code using cmakelint and generate xUnit test
result files.
The ability to lint CMake code using cmakelint and generate xUnit test
result files.
|
|
| 1 | 2019-03-10 | ament_lint_auto |
The auto-magic functions for ease to use of the ament linters in CMake.
The auto-magic functions for ease to use of the ament linters in CMake.
|
|
| 1 | 2019-03-10 | ament_flake8 |
The ability to check code for style and syntax conventions with flake8.
The ability to check code for style and syntax conventions with flake8.
|
|
| 1 | 2019-03-10 | ament_cpplint |
The ability to check code against the Google style conventions using
cpplint and generate xUnit test result files.
The ability to check code against the Google style conventions using
cpplint and generate xUnit test result files.
|
|
| 1 | 2019-03-10 | ament_cppcheck |
The ability to perform static code analysis on C/C++ code using Cppcheck
and generate xUnit test result files.
The ability to perform static code analysis on C/C++ code using Cppcheck
and generate xUnit test result files.
|
|
| 1 | 2019-03-10 | ament_copyright |
The ability to check source files for copyright and license
information.
The ability to check source files for copyright and license
information.
|
|
| 1 | 2019-03-10 | ament_cmake_xmllint |
The CMake API for ament_xmllint to check XML file using xmmlint.
The CMake API for ament_xmllint to check XML file using xmmlint.
|
|
| 1 | 2019-03-10 | ament_cmake_uncrustify |
The CMake API for ament_uncrustify to check code against styleconventions
using uncrustify.
The CMake API for ament_uncrustify to check code against styleconventions
using uncrustify.
|
|
| 1 | 2019-03-10 | ament_cmake_test |
The ability to add tests in the ament buildsystem in CMake.
The ability to add tests in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_target_dependencies |
The ability to add definitions, include directories and libraries of a package to a target in the ament buildsystem in CMake.
The ability to add definitions, include directories and libraries of a package to a target in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_python |
The ability to use Python in the ament buildsystem in CMake.
The ability to use Python in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_pytest |
The ability to run Python tests using pytest in the ament buildsystem in CMake.
The ability to run Python tests using pytest in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_pyflakes |
The CMake API for ament_pyflakes to check code using pyflakes.
The CMake API for ament_pyflakes to check code using pyflakes.
|
|
| 1 | 2019-03-10 | ament_cmake_pep8 |
The CMake API for ament_pep8 to check code against the style conventions in
PEP 8.
The CMake API for ament_pep8 to check code against the style conventions in
PEP 8.
|
|
| 1 | 2019-03-10 | ament_cmake_pep257 |
The CMake API for ament_pep257 to check code against the style conventions in
PEP 257.
The CMake API for ament_pep257 to check code against the style conventions in
PEP 257.
|
|
| 1 | 2019-03-10 | ament_cmake_pclint |
The CMake API for ament_pclint to perform static code analysis on C/C++
code using PCLint.
The CMake API for ament_pclint to perform static code analysis on C/C++
code using PCLint.
|
|
| 1 | 2019-03-10 | ament_cmake_nose |
The ability to add nose-based tests in the ament buildsystem in CMake.
The ability to add nose-based tests in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_lint_cmake |
The CMake API for ament_lint_cmake to lint CMake code using cmakelint.
The CMake API for ament_lint_cmake to lint CMake code using cmakelint.
|
|
| 1 | 2019-03-10 | ament_cmake_libraries |
The functionality to deduplicate libraries in the ament buildsystem in CMake.
The functionality to deduplicate libraries in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_include_directories |
The functionality to order include directories according to a chain of prefixes in the ament buildsystem in CMake.
The functionality to order include directories according to a chain of prefixes in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_gtest |
The ability to add gtest-based tests in the ament buildsystem in CMake.
The ability to add gtest-based tests in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_gmock |
The ability to add Google mock-based tests in the ament buildsystem in CMake.
The ability to add Google mock-based tests in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_flake8 |
The CMake API for ament_flake8 to check code syntax and style conventions
with flake8.
The CMake API for ament_flake8 to check code syntax and style conventions
with flake8.
|
|
| 1 | 2019-03-10 | ament_cmake_export_link_flags |
The ability to export link flags to downstream packages in the ament buildsystem.
The ability to export link flags to downstream packages in the ament buildsystem.
|
|
| 1 | 2019-03-10 | ament_cmake_export_libraries |
The ability to export libraries to downstream packages in the ament buildsystem in CMake.
The ability to export libraries to downstream packages in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_export_interfaces |
The ability to export interfaces to downstream packages in the ament buildsystem in CMake.
The ability to export interfaces to downstream packages in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_export_include_directories |
The ability to export include directories to downstream packages in the ament buildsystem in CMake.
The ability to export include directories to downstream packages in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_export_dependencies |
The ability to export dependencies to downstream packages in the ament buildsystem in CMake.
The ability to export dependencies to downstream packages in the ament buildsystem in CMake.
|
|
| 1 | 2019-03-10 | ament_cmake_export_definitions |
The ability to export definitions to downstream packages in the ament buildsystem.
The ability to export definitions to downstream packages in the ament buildsystem.
|
|
| 1 | 2019-03-10 | ament_cmake_cpplint |
The CMake API for ament_cpplint to lint C / C++ code using cpplint.
The CMake API for ament_cpplint to lint C / C++ code using cpplint.
|
|
| 1 | 2019-03-10 | ament_cmake_cppcheck |
The CMake API for ament_cppcheck to perform static code analysis on C/C++
code using Cppcheck.
The CMake API for ament_cppcheck to perform static code analysis on C/C++
code using Cppcheck.
|
|
| 1 | 2019-03-10 | ament_cmake_core |
The core of the ament buildsystem in CMake.
Several subcomponents provide specific funtionalities:
* environment: provide prefix-level setup files
* environment_hooks: provide package-level setup files and environment hooks
* index: store information in an index and retrieve them without crawling
* package_templates: templates from the ament_package Python package
* symlink_install: use symlinks for CMake install commands
The core of the ament buildsystem in CMake.
Several subcomponents provide specific funtionalities:
* environment: provide prefix-level setup files
* environment_hooks: provide package-level setup files and environment hooks
* index: store information in an index and retrieve them without crawling
* package_templates: templates from the ament_package Python package
* symlink_install: use symlinks for CMake install commands
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 1 | 2024-12-04 | eiquadprog |
Eiquadprog a QP solver using active sets
Eiquadprog a QP solver using active sets
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 2 | 2024-11-11 | urdfdom_py |
Python implementation of the URDF parser.
Python implementation of the URDF parser.
|
|
| 1 | 2024-11-08 | costmap_converter_msgs |
Package containing message types for costmap conversion
Package containing message types for costmap conversion
|
|
| 1 | 2024-11-08 | costmap_converter |
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
|
|
| 1 | 2024-10-31 | velodyne_pointcloud |
Point cloud conversions for Velodyne 3D LIDARs.
Point cloud conversions for Velodyne 3D LIDARs.
|
|
| 1 | 2024-10-31 | velodyne_msgs |
ROS message definitions for Velodyne 3D LIDARs.
ROS message definitions for Velodyne 3D LIDARs.
|
|
| 1 | 2024-10-31 | velodyne_laserscan |
Extract a single ring of a Velodyne PointCloud2 and publish it as a LaserScan message
Extract a single ring of a Velodyne PointCloud2 and publish it as a LaserScan message
|
|
| 1 | 2024-10-31 | velodyne_driver |
ROS device driver for Velodyne 3D LIDARs.
ROS device driver for Velodyne 3D LIDARs.
|
|
| 1 | 2024-10-31 | velodyne |
Basic ROS support for the Velodyne 3D LIDARs.
Basic ROS support for the Velodyne 3D LIDARs.
|
|
| 1 | 2024-10-30 | eigenpy |
Bindings between Numpy and Eigen using Boost.Python
Bindings between Numpy and Eigen using Boost.Python
|
|
| 1 | 2024-10-25 | lanelet2_validation |
Package for sanitizing lanelet maps
Package for sanitizing lanelet maps
|
|
| 1 | 2024-10-25 | lanelet2_traffic_rules |
Package for interpreting traffic rules in a lanelet map
Package for interpreting traffic rules in a lanelet map
|
|
| 1 | 2024-10-25 | lanelet2_routing |
Routing module for lanelet2
Routing module for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_python |
Python bindings for lanelet2
Python bindings for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_projection |
Lanelet2 projection library for lat/lon to local x/y conversion
Lanelet2 projection library for lat/lon to local x/y conversion
|
|
| 1 | 2024-10-25 | lanelet2_matching |
Library to match objects to lanelets
Library to match objects to lanelets
|
|
| 1 | 2024-10-25 | lanelet2_maps |
Example maps in the lanelet2-format
Example maps in the lanelet2-format
|
|
| 1 | 2024-10-25 | lanelet2_io |
Parser/Writer module for lanelet2
Parser/Writer module for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_examples |
Examples for working with Lanelet2
Examples for working with Lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_core |
Lanelet2 core module
Lanelet2 core module
|
|
| 1 | 2024-10-25 | lanelet2 |
Meta-package for lanelet2
Meta-package for lanelet2
|
|
| 1 | 2024-10-17 | foonathan_memory_vendor |
Foonathan/memory vendor package for Fast-RTPS.
Foonathan/memory vendor package for Fast-RTPS.
|
|
| 1 | 2024-09-20 | mrt_cmake_modules |
CMake Functions and Modules for automating CMake
CMake Functions and Modules for automating CMake
|
|
| 1 | 2024-08-20 | filters |
This library provides a standardized interface for processing data as a sequence
of filters. This package contains a base class upon which to build specific implementations
as well as an interface which dynamically loads filters based on runtime parameters.
This library provides a standardized interface for processing data as a sequence
of filters. This package contains a base class upon which to build specific implementations
as well as an interface which dynamically loads filters based on runtime parameters.
|
|
| 1 | 2024-07-30 | rcdiscover |
This package contains tools for the discovery of Roboception devices via GigE Vision.
This package contains tools for the discovery of Roboception devices via GigE Vision.
|
|
| 2 | 2024-07-23 | vision_msgs_rviz_plugins |
RVIZ2 plugins for visualizing vision_msgs
RVIZ2 plugins for visualizing vision_msgs
|
|
| 2 | 2024-07-23 | vision_msgs |
Messages for interfacing with various computer vision pipelines, such as
object detectors.
Messages for interfacing with various computer vision pipelines, such as
object detectors.
|
|
| 1 | 2024-06-17 | librealsense2 |
Library for controlling and capturing data from the Intel(R) RealSense(TM) D400 devices.
Library for controlling and capturing data from the Intel(R) RealSense(TM) D400 devices.
|
|
| 1 | 2024-06-12 | dynamic-graph |
Dynamic graph library
Dynamic graph library
|
|
| 1 | 2024-05-25 | nmea_msgs |
The nmea_msgs package contains messages related to data in the NMEA format.
The nmea_msgs package contains messages related to data in the NMEA format.
|
|
| 1 | 2024-04-26 | gtest_vendor |
The package provides GoogleTest.
The package provides GoogleTest.
|
|
| 1 | 2024-04-26 | gmock_vendor |
The package provides GoogleMock.
The package provides GoogleMock.
|
|
| 1 | 2024-04-23 | pcl_msgs |
Package containing PCL (Point Cloud Library)-related ROS messages.
Package containing PCL (Point Cloud Library)-related ROS messages.
|
|
| 1 | 2024-04-04 | geographic_msgs |
ROS messages for Geographic Information Systems.
ROS messages for Geographic Information Systems.
|
|
| 1 | 2024-04-04 | geographic_info |
Geographic information metapackage.
Not needed for wet packages, use only to resolve dry stack
dependencies.
Geographic information metapackage.
Not needed for wet packages, use only to resolve dry stack
dependencies.
|
|
| 1 | 2024-04-04 | geodesy |
Python and C++ interfaces for manipulating geodetic coordinates.
Python and C++ interfaces for manipulating geodetic coordinates.
|
|
| 2 | 2024-04-01 | octovis |
octovis is visualization tool for the OctoMap library based on Qt and libQGLViewer. See
http://octomap.github.io for details.
octovis is visualization tool for the OctoMap library based on Qt and libQGLViewer. See
http://octomap.github.io for details.
|
|
| 2 | 2024-04-01 | octomap |
The OctoMap library implements a 3D occupancy grid mapping approach, providing data structures and mapping algorithms in C++. The map implementation is based on an octree. See
http://octomap.github.io for details.
The OctoMap library implements a 3D occupancy grid mapping approach, providing data structures and mapping algorithms in C++. The map implementation is based on an octree. See
http://octomap.github.io for details.
|
|
| 2 | 2024-04-01 | dynamic_edt_3d |
The dynamicEDT3D library implements an inrementally updatable Euclidean distance transform (EDT) in 3D. It comes with a wrapper to use the OctoMap 3D representation and hooks into the change detection of the OctoMap library to propagate changes to the EDT.
The dynamicEDT3D library implements an inrementally updatable Euclidean distance transform (EDT) in 3D. It comes with a wrapper to use the OctoMap 3D representation and hooks into the change detection of the OctoMap library to propagate changes to the EDT.
|
|
| 2 | 2024-03-15 | cartographer |
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations.
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations.
|
|
| 1 | 2024-03-14 | rc_dynamics_api |
The rc_dynamics_api provides an API for easy handling of the dynamic-state data
streams provided by Roboception's stereo camera with self-localization.
See http://rc-visard.com
Dynamic-state estimates of the rc_visard relate to its self-localization and
ego-motion estimation. These states refer to rc_visard's current pose,
velocity, or acceleration and are published on demand via several data streams.
For a complete list and descriptions of these dynamics states and the
respective data streams please refer to rc_visard's user manual.
The rc_dynamics_api provides an API for easy handling of the dynamic-state data
streams provided by Roboception's stereo camera with self-localization.
See http://rc-visard.com
Dynamic-state estimates of the rc_visard relate to its self-localization and
ego-motion estimation. These states refer to rc_visard's current pose,
velocity, or acceleration and are published on demand via several data streams.
For a complete list and descriptions of these dynamics states and the
respective data streams please refer to rc_visard's user manual.
|
|
| 2 | 2024-03-08 | teleop_twist_keyboard |
A robot-agnostic teleoperation node to convert keyboard commands to Twist
messages.
A robot-agnostic teleoperation node to convert keyboard commands to Twist
messages.
|
|
| 1 | 2024-01-31 | urg_node |
urg_node
urg_node
|
|
| 1 | 2023-10-26 | eigen_stl_containers |
This package provides a set of typedef's that allow
using Eigen datatypes in STL containers
This package provides a set of typedef's that allow
using Eigen datatypes in STL containers
|
|
| 1 | 2023-08-21 | joint_state_publisher_gui |
This package contains a GUI tool for setting and publishing joint state values for a given URDF.
This package contains a GUI tool for setting and publishing joint state values for a given URDF.
|
|
| 2 | 2023-08-21 | joint_state_publisher |
This package contains a tool for setting and publishing joint state values for a given URDF.
This package contains a tool for setting and publishing joint state values for a given URDF.
|
|
| 1 | 2023-06-23 | rclc_parameter |
Parameter server implementation for micro-ROS nodes
Parameter server implementation for micro-ROS nodes
|
|
| 1 | 2023-06-23 | rclc_lifecycle |
rclc lifecycle convenience methods.
rclc lifecycle convenience methods.
|
|
| 1 | 2023-06-23 | rclc_examples |
Example of using rclc_executor
Example of using rclc_executor
|
|
| 1 | 2023-06-23 | rclc |
The ROS client library in C.
The ROS client library in C.
|
|
| 1 | 2023-05-26 | urg_node_msgs |
urg_node_msgs
urg_node_msgs
|
|
| 1 | 2023-05-07 | grbl_ros |
ROS2 package to interface with a GRBL serial device
ROS2 package to interface with a GRBL serial device
|
|
| 1 | 2023-04-25 | neobotix_usboard_msgs |
neobotix_usboard package
neobotix_usboard package
|
|
| 1 | 2023-04-25 | mobileye_560_660_msgs |
Message definitions for the Mobileye 560/660
Message definitions for the Mobileye 560/660
|
|
| 1 | 2023-04-25 | kartech_linear_actuator_msgs |
The kartech_linear_actuator_msgs package
The kartech_linear_actuator_msgs package
|
|
| 1 | 2023-04-25 | ibeo_msgs |
The ibeo_msgs package
The ibeo_msgs package
|
|
| 1 | 2023-04-25 | derived_object_msgs |
Abstracted Messages from Perception Modalities
Abstracted Messages from Perception Modalities
|
|
| 1 | 2023-04-25 | delphi_srr_msgs |
Message definitions for the Delphi SRR
Message definitions for the Delphi SRR
|
|
| 1 | 2023-04-25 | delphi_mrr_msgs |
Message definitions for the Delphi MRR
Message definitions for the Delphi MRR
|
|
| 1 | 2023-04-25 | delphi_esr_msgs |
Message definitions for the Delphi ESR
Message definitions for the Delphi ESR
|
|
| 1 | 2023-03-22 | angles |
This package provides a set of simple math utilities to work
with angles. The utilities cover simple things like
normalizing an angle and conversion between degrees and
radians. But even if you're trying to calculate things like
the shortest angular distance between two joint space
positions of your robot, but the joint motion is constrained
by joint limits, this package is what you need. The code in
this package is stable and well tested. There are no plans for
major changes in the near future.
This package provides a set of simple math utilities to work
with angles. The utilities cover simple things like
normalizing an angle and conversion between degrees and
radians. But even if you're trying to calculate things like
the shortest angular distance between two joint space
positions of your robot, but the joint motion is constrained
by joint limits, this package is what you need. The code in
this package is stable and well tested. There are no plans for
major changes in the near future.
|
|
| 1 | 2023-03-16 | rqt_action |
rqt_action provides a feature to introspect all available ROS
action types. By utilizing rqt_msg, the output format is
unified with it and rqt_srv. Note that the actions shown on this plugin
is the ones that are stored on your machine, not on the ROS core your rqt
instance connects to.
rqt_action provides a feature to introspect all available ROS
action types. By utilizing rqt_msg, the output format is
unified with it and rqt_srv. Note that the actions shown on this plugin
is the ones that are stored on your machine, not on the ROS core your rqt
instance connects to.
|
|
| 1 | 2023-02-25 | py_trees_js |
Javascript library for visualising behaviour trees.
Javascript library for visualising behaviour trees.
|
|
| 1 | 2023-02-15 | ros_workspace |
Provides the prefix level environment files for ROS 2 packages.
Provides the prefix level environment files for ROS 2 packages.
|
|
| 1 | 2022-12-30 | ntpd_driver |
ntpd_driver sends TimeReference message time to ntpd server
ntpd_driver sends TimeReference message time to ntpd server
|
|
| 2 | 2022-10-01 | kobuki_velocity_smoother |
Bound incoming velocity messages according to robot velocity and acceleration limits.
Bound incoming velocity messages according to robot velocity and acceleration limits.
|
|
| 1 | 2022-09-27 | ecl_tools |
Tools and utilities for ecl development.
Tools and utilities for ecl development.
|
|
| 1 | 2022-09-27 | ecl_license |
Maintains the ecl licenses and also provides an install
target for deploying licenses with the ecl libraries.
Maintains the ecl licenses and also provides an install
target for deploying licenses with the ecl libraries.
|
|
| 1 | 2022-09-27 | ecl_build |
Collection of cmake/make build tools primarily for ecl development itself, but also
contains a few cmake modules useful outside of the ecl.
Collection of cmake/make build tools primarily for ecl development itself, but also
contains a few cmake modules useful outside of the ecl.
|
|
| 1 | 2022-09-05 | sick_scan2 |
A ROS2 driver for the SICK TiM series of laser scanners.
This package is based on the sick_scan-Repository.
A ROS2 driver for the SICK TiM series of laser scanners.
This package is based on the sick_scan-Repository.
|
|
| 2 | 2022-03-31 | rqt_tf_tree |
rqt_tf_tree provides a GUI plugin for visualizing the ROS TF frame tree.
rqt_tf_tree provides a GUI plugin for visualizing the ROS TF frame tree.
|
|
| 1 | 2022-03-03 | autoware_auto_vehicle_msgs |
Interfaces between core Autoware.Auto vehicle components
Interfaces between core Autoware.Auto vehicle components
|
|
| 1 | 2022-03-03 | autoware_auto_system_msgs |
Interfaces between core Autoware.Auto system components
Interfaces between core Autoware.Auto system components
|
|
| 1 | 2022-03-03 | autoware_auto_planning_msgs |
Interfaces between core Autoware.Auto planning components
Interfaces between core Autoware.Auto planning components
|
|
| 1 | 2022-03-03 | autoware_auto_perception_msgs |
Interfaces between core Autoware.Auto perception components
Interfaces between core Autoware.Auto perception components
|
|
| 1 | 2022-03-03 | autoware_auto_msgs |
Interfaces between core Autoware.Auto components
Interfaces between core Autoware.Auto components
|
|
| 1 | 2022-03-03 | autoware_auto_mapping_msgs |
Interfaces between core Autoware.Auto mapping components
Interfaces between core Autoware.Auto mapping components
|
|
| 1 | 2022-03-03 | autoware_auto_geometry_msgs |
Geometry related message definitions in Autoware.Auto
Geometry related message definitions in Autoware.Auto
|
|
| 1 | 2022-03-03 | autoware_auto_debug_msgs |
The autoware_auto_debug_msgs package
The autoware_auto_debug_msgs package
|
|
| 1 | 2022-03-03 | autoware_auto_control_msgs |
Interfaces between core Autoware.Auto control components
Interfaces between core Autoware.Auto control components
|
|
| 1 | 2022-02-17 | rqt_console |
rqt_console provides a GUI plugin for displaying and filtering ROS messages.
rqt_console provides a GUI plugin for displaying and filtering ROS messages.
|
|
| 1 | 2021-11-08 | plotjuggler_msgs |
Special Messages for PlotJuggler
Special Messages for PlotJuggler
|
|
| 2 | 2021-10-29 | cartographer_rviz |
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations. This package provides Cartographer's RViz integration.
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations. This package provides Cartographer's RViz integration.
|
|
| 2 | 2021-10-29 | cartographer_ros_msgs |
ROS messages for the cartographer_ros package.
ROS messages for the cartographer_ros package.
|
|
| 2 | 2021-10-29 | cartographer_ros |
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations. This package provides Cartographer's ROS integration.
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations. This package provides Cartographer's ROS integration.
|
|
| 1 | 2021-08-31 | rqt_top |
RQT plugin for monitoring ROS processes.
RQT plugin for monitoring ROS processes.
|
|
| 1 | 2021-08-31 | rqt_srv |
A Python GUI plugin for introspecting available ROS message types.
Note that the srvs available through this plugin is the ones that are stored
on your machine, not on the ROS core your rqt instance connects to.
A Python GUI plugin for introspecting available ROS message types.
Note that the srvs available through this plugin is the ones that are stored
on your machine, not on the ROS core your rqt instance connects to.
|
|
| 1 | 2021-08-31 | rqt_shell |
rqt_shell is a Python GUI plugin providing an interactive shell.
rqt_shell is a Python GUI plugin providing an interactive shell.
|
|
| 1 | 2021-08-31 | rqt_service_caller |
rqt_service_caller provides a GUI plugin for calling arbitrary services.
rqt_service_caller provides a GUI plugin for calling arbitrary services.
|
|
| 1 | 2021-08-31 | rqt_py_console |
rqt_py_console is a Python GUI plugin providing an interactive Python console.
rqt_py_console is a Python GUI plugin providing an interactive Python console.
|
|
| 1 | 2021-08-31 | rqt_py_common |
rqt_py_common provides common functionality for rqt plugins written in Python.
Despite no plugin is provided, this package is part of the rqt_common_plugins
repository to keep refactoring generic functionality from these common plugins
into this package as easy as possible.
Functionality included in this package should cover generic ROS concepts and
should not introduce any special dependencies beside "ros_base".
rqt_py_common provides common functionality for rqt plugins written in Python.
Despite no plugin is provided, this package is part of the rqt_common_plugins
repository to keep refactoring generic functionality from these common plugins
into this package as easy as possible.
Functionality included in this package should cover generic ROS concepts and
should not introduce any special dependencies beside "ros_base".
|
|
| 1 | 2021-08-31 | rqt_gui_py |
rqt_gui_py enables GUI plugins to use the Python client library for ROS.
rqt_gui_py enables GUI plugins to use the Python client library for ROS.
|
|
| 1 | 2021-08-31 | rqt_gui_cpp |
rqt_gui_cpp enables GUI plugins to use the C++ client library for ROS.
rqt_gui_cpp enables GUI plugins to use the C++ client library for ROS.
|
|
| 1 | 2021-08-31 | rqt_gui |
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui.
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui.
|
|
| 1 | 2021-08-31 | rqt |
rqt is a Qt-based framework for GUI development for ROS. It consists of three parts/metapackages
rqt is a Qt-based framework for GUI development for ROS. It consists of three parts/metapackages
|
|
| 2 | 2021-08-25 | automotive_platform_msgs |
Generic Messages for Communication with an Automotive Autonomous Platform
Generic Messages for Communication with an Automotive Autonomous Platform
|
|
| 2 | 2021-08-25 | automotive_navigation_msgs |
Generic Messages for Navigation Objectives in Automotive Automation Software
Generic Messages for Navigation Objectives in Automotive Automation Software
|
|
| 2 | 2021-08-25 | automotive_autonomy_msgs |
Messages for vehicle automation
Messages for vehicle automation
|
|
| 1 | 2021-05-30 | xacro |
Xacro (XML Macros)
Xacro is an XML macro language. With xacro, you can construct shorter and more readable XML files by using macros that expand to larger XML expressions.
Xacro (XML Macros)
Xacro is an XML macro language. With xacro, you can construct shorter and more readable XML files by using macros that expand to larger XML expressions.
|
|
| 2 | 2021-05-18 | rosbag2_bag_v2_plugins |
Package containing storage and converter plugins for rosbag 1
Package containing storage and converter plugins for rosbag 1
|
|
| 2 | 2021-05-18 | ros1_rosbag_storage_vendor |
Vendor package for rosbag_storage of ROS1
Vendor package for rosbag_storage of ROS1
|
|
| 1 | 2021-05-10 | rqt_reconfigure |
This rqt plugin provides a way to view and edit parameters on nodes.
This rqt plugin provides a way to view and edit parameters on nodes.
|
|
| 1 | 2021-04-06 | rqt_topic |
rqt_topic provides a GUI plugin for displaying debug information about ROS topics including publishers, subscribers, publishing rate, and ROS Messages.
rqt_topic provides a GUI plugin for displaying debug information about ROS topics including publishers, subscribers, publishing rate, and ROS Messages.
|
|
| 1 | 2021-03-02 | slam_toolbox |
This package provides a sped up improved slam karto with updated SDK and visualization and modification toolsets
This package provides a sped up improved slam karto with updated SDK and visualization and modification toolsets
|
|
| 1 | 2021-02-12 | python_qt_binding |
This stack provides Python bindings for Qt.
There are two providers: pyside and pyqt. PySide2 is available under
the GPL, LGPL and a commercial license. PyQt is released under the GPL.
Both the bindings and tools to build bindings are included from each
available provider. For PySide, it is called "Shiboken". For PyQt,
this is called "SIP".
Also provided is adapter code to make the user's Python code
independent of which binding provider was actually used which makes
it very easy to switch between these.
This stack provides Python bindings for Qt.
There are two providers: pyside and pyqt. PySide2 is available under
the GPL, LGPL and a commercial license. PyQt is released under the GPL.
Both the bindings and tools to build bindings are included from each
available provider. For PySide, it is called "Shiboken". For PyQt,
this is called "SIP".
Also provided is adapter code to make the user's Python code
independent of which binding provider was actually used which makes
it very easy to switch between these.
|
|
| 1 | 2021-01-26 | laser_proc |
laser_proc
laser_proc
|
|
| 1 | 2021-01-04 | navigation2 |
ROS2 Navigation Stack
ROS2 Navigation Stack
|
|
| 2 | 2021-01-04 | nav_2d_utils |
A handful of useful utility functions for nav_2d packages.
A handful of useful utility functions for nav_2d packages.
|
|
| 2 | 2021-01-04 | nav_2d_msgs |
Basic message types for two dimensional navigation, extending from geometry_msgs::Pose2D.
Basic message types for two dimensional navigation, extending from geometry_msgs::Pose2D.
|
|
| 1 | 2021-01-04 | nav2_waypoint_follower |
A waypoint follower navigation server
A waypoint follower navigation server
|
|
| 1 | 2021-01-04 | nav2_voxel_grid |
voxel_grid provides an implementation of an efficient 3D voxel grid. The occupancy grid can support 3 different representations for the state of a cell: marked, free, or unknown. Due to the underlying implementation relying on bitwise and and or integer operations, the voxel grid only supports 16 different levels per voxel column. However, this limitation yields raytracing and cell marking performance in the grid comparable to standard 2D structures making it quite fast compared to most 3D structures.
voxel_grid provides an implementation of an efficient 3D voxel grid. The occupancy grid can support 3 different representations for the state of a cell: marked, free, or unknown. Due to the underlying implementation relying on bitwise and and or integer operations, the voxel grid only supports 16 different levels per voxel column. However, this limitation yields raytracing and cell marking performance in the grid comparable to standard 2D structures making it quite fast compared to most 3D structures.
|
|
| 1 | 2021-01-04 | nav2_util |
TODO
TODO
|
|
| 1 | 2021-01-04 | nav2_turtlebot3_rl |
This package enables Reinfocement Learning with Gazebo and Turtlebot3
This package enables Reinfocement Learning with Gazebo and Turtlebot3
|
|
| 1 | 2021-01-04 | nav2_system_tests |
TODO
TODO
|
|
| 1 | 2021-01-04 | nav2_rviz_plugins |
Navigation 2 plugins for rviz
Navigation 2 plugins for rviz
|
|
| 1 | 2021-01-04 | nav2_recoveries |
TODO
TODO
|
|
| 1 | 2021-01-04 | nav2_planner |
TODO
TODO
|
|
| 1 | 2021-01-04 | nav2_navfn_planner |
TODO
TODO
|
|
| 1 | 2021-01-04 | nav2_msgs |
Messages and service files for the navigation2 stack
Messages and service files for the navigation2 stack
|
|
| 1 | 2021-01-04 | nav2_map_server |
Refactored map server for ROS2 Navigation
Refactored map server for ROS2 Navigation
|
|
| 1 | 2021-01-04 | nav2_lifecycle_manager |
A controller/manager for the lifecycle nodes of the Navigation 2 system
A controller/manager for the lifecycle nodes of the Navigation 2 system
|
|
| 1 | 2021-01-04 | nav2_gazebo_spawner |
Package for spawning a robot model into Gazebo for navigation2
Package for spawning a robot model into Gazebo for navigation2
|
|
| 1 | 2021-01-04 | nav2_dwb_controller |
ROS2 controller (DWB) metapackage
ROS2 controller (DWB) metapackage
|
|
| 1 | 2021-01-04 | nav2_costmap_2d |
This package provides an implementation of a 2D costmap that takes in sensor
data from the world, builds a 2D or 3D occupancy grid of the data (depending
on whether a voxel based implementation is used), and inflates costs in a
2D costmap based on the occupancy grid and a user specified inflation radius.
This package also provides support for map_server based initialization of a
costmap, rolling window based costmaps, and parameter based subscription to
and configuration of sensor topics.
This package provides an implementation of a 2D costmap that takes in sensor
data from the world, builds a 2D or 3D occupancy grid of the data (depending
on whether a voxel based implementation is used), and inflates costs in a
2D costmap based on the occupancy grid and a user specified inflation radius.
This package also provides support for map_server based initialization of a
costmap, rolling window based costmaps, and parameter based subscription to
and configuration of sensor topics.
|
|
| 1 | 2021-01-04 | nav2_core |
A set of headers for plugins core to the navigation2 stack
A set of headers for plugins core to the navigation2 stack
|
|
| 1 | 2021-01-04 | nav2_controller |
Controller action interface
Controller action interface
|
|
| 1 | 2021-01-04 | nav2_common |
Common support functionality used throughout the navigation 2 stack
Common support functionality used throughout the navigation 2 stack
|
|
| 1 | 2021-01-04 | nav2_bt_navigator |
TODO
TODO
|
|
| 2 | 2021-01-04 | nav2_bringup |
Bringup scripts and configurations for the navigation2 stack
Bringup scripts and configurations for the navigation2 stack
|
|
| 1 | 2021-01-04 | nav2_behavior_tree |
TODO
TODO
|
|
| 1 | 2021-01-04 | nav2_amcl |
|
|
| 2 | 2021-01-04 | dwb_plugins |
Standard implementations of the GoalChecker
and TrajectoryGenerators for dwb_core
Standard implementations of the GoalChecker
and TrajectoryGenerators for dwb_core
|
|
| 2 | 2021-01-04 | dwb_msgs |
Message/Service definitions specifically for the dwb_core
Message/Service definitions specifically for the dwb_core
|
|
| 2 | 2021-01-04 | dwb_critics |
The dwb_critics package
The dwb_critics package
|
|
| 1 | 2021-01-04 | dwb_core |
TODO
TODO
|
|
| 2 | 2021-01-04 | costmap_queue |
The costmap_queue package
The costmap_queue package
|
|
| 1 | 2020-12-28 | turtlebot3_teleop |
Teleoperation node using keyboard for TurtleBot3.
Teleoperation node using keyboard for TurtleBot3.
|
|
| 1 | 2020-12-28 | turtlebot3_node |
TurtleBot3 driver node that include diff drive controller, odometry and tf node
TurtleBot3 driver node that include diff drive controller, odometry and tf node
|
|
| 1 | 2020-12-28 | turtlebot3_navigation2 |
ROS 2 launch scripts for navigation2
ROS 2 launch scripts for navigation2
|
|
| 1 | 2020-12-28 | turtlebot3_example |
This package provides four basic examples for TurtleBot3 (i.e., interactive marker, object detection, patrol and position control).
This package provides four basic examples for TurtleBot3 (i.e., interactive marker, object detection, patrol and position control).
|
|
| 1 | 2020-12-28 | turtlebot3_description |
3D models of the TurtleBot3 for simulation and visualization
3D models of the TurtleBot3 for simulation and visualization
|
|
| 1 | 2020-12-28 | turtlebot3_cartographer |
ROS 2 launch scripts for cartographer
ROS 2 launch scripts for cartographer
|
|
| 1 | 2020-12-28 | turtlebot3_bringup |
ROS 2 launch scripts for starting the TurtleBot3
ROS 2 launch scripts for starting the TurtleBot3
|
|
| 1 | 2020-12-28 | turtlebot3 |
ROS 2 packages for TurtleBot3
ROS 2 packages for TurtleBot3
|
|
| 1 | 2020-12-18 | can_msgs |
CAN related message types.
CAN related message types.
|
|
| 2 | 2020-12-17 | system_modes_examples |
Simple example system and according launch files for the system_modes
package.
Simple example system and according launch files for the system_modes
package.
|
|
| 2 | 2020-12-17 | system_modes |
The system modes concept assumes that a robotics system is built
from components with a lifecycle. It adds a notion of (sub-)systems,
hiararchically grouping these nodes, as well as a notion of modes
that determine the configuration of these nodes and (sub-)systems in
terms of their parameter values.
The system modes concept assumes that a robotics system is built
from components with a lifecycle. It adds a notion of (sub-)systems,
hiararchically grouping these nodes, as well as a notion of modes
that determine the configuration of these nodes and (sub-)systems in
terms of their parameter values.
|
|
| 2 | 2020-12-12 | mavlink |
MAVLink message marshaling library.
This package provides C-headers and C++11 library
for both 1.0 and 2.0 versions of protocol.
For pymavlink use separate install via rosdep (python-pymavlink).
MAVLink message marshaling library.
This package provides C-headers and C++11 library
for both 1.0 and 2.0 versions of protocol.
For pymavlink use separate install via rosdep (python-pymavlink).
|
|
| 2 | 2020-12-10 | ros_core |
A package to aggregate the packages required to use publish / subscribe, services, generate messages and other core ROS concepts.
A package to aggregate the packages required to use publish / subscribe, services, generate messages and other core ROS concepts.
|
|
| 2 | 2020-12-10 | ros_base |
A package which extends 'ros_core' and includes other basic functionalities like tf2 and urdf.
A package which extends 'ros_core' and includes other basic functionalities like tf2 and urdf.
|
|
| 2 | 2020-12-10 | desktop |
A package which extends 'ros_base' and includes high level packages like vizualization tools and demos.
A package which extends 'ros_base' and includes high level packages like vizualization tools and demos.
|
|
| 1 | 2020-12-09 | ros1_bridge |
A simple bridge between ROS 1 and ROS 2
A simple bridge between ROS 1 and ROS 2
|
|
| 3 | 2020-12-04 | tf2_tools |
tf2_tools
tf2_tools
|
|
| 3 | 2020-12-04 | tf2_sensor_msgs |
Small lib to transform sensor_msgs with tf. Most notably, PointCloud2
Small lib to transform sensor_msgs with tf. Most notably, PointCloud2
|
|
| 3 | 2020-12-04 | tf2_ros |
This package contains the ROS bindings for the tf2 library, for both Python and C++.
This package contains the ROS bindings for the tf2 library, for both Python and C++.
|
|
| 2 | 2020-12-04 | tf2_py |
The tf2_py package
The tf2_py package
|
|
| 3 | 2020-12-04 | tf2_msgs |
tf2_msgs
tf2_msgs
|
|
| 3 | 2020-12-04 | tf2_kdl |
KDL binding for tf2
KDL binding for tf2
|
|
| 3 | 2020-12-04 | tf2_geometry_msgs |
tf2_geometry_msgs
tf2_geometry_msgs
|
|
| 3 | 2020-12-04 | tf2_eigen |
tf2_eigen
tf2_eigen
|
|
| 3 | 2020-12-04 | tf2 |
tf2 is the second generation of the transform library, which lets
the user keep track of multiple coordinate frames over time. tf2
maintains the relationship between coordinate frames in a tree
structure buffered in time, and lets the user transform points,
vectors, etc between any two coordinate frames at any desired
point in time.
tf2 is the second generation of the transform library, which lets
the user keep track of multiple coordinate frames over time. tf2
maintains the relationship between coordinate frames in a tree
structure buffered in time, and lets the user transform points,
vectors, etc between any two coordinate frames at any desired
point in time.
|
|
| 1 | 2020-12-04 | test_launch_testing |
Tests for the launch_testing package.
Tests for the launch_testing package.
|
|
| 2 | 2020-12-04 | test_launch_ros |
Tests for ROS specific extensions to the launch tool.
Tests for ROS specific extensions to the launch tool.
|
|
| 1 | 2020-12-04 | rosidl_typesupport_introspection_cpp |
Generate the message type support for dynamic message construction in C++.
Generate the message type support for dynamic message construction in C++.
|
|
| 1 | 2020-12-04 | rosidl_typesupport_introspection_c |
Generate the message type support for dynamic message construction in C.
Generate the message type support for dynamic message construction in C.
|
|
| 1 | 2020-12-04 | rosidl_typesupport_interface |
The interface for rosidl typesupport packages.
The interface for rosidl typesupport packages.
|
|
| 1 | 2020-12-04 | rosidl_typesupport_cpp |
Generate the type support for C++ messages.
Generate the type support for C++ messages.
|
|
| 1 | 2020-12-04 | rosidl_typesupport_connext_cpp |
Generate the C++ interfaces for RTI Connext.
Generate the C++ interfaces for RTI Connext.
|
|
| 1 | 2020-12-04 | rosidl_typesupport_connext_c |
Generate the C interfaces for RTI Connext.
Generate the C interfaces for RTI Connext.
|
|
| 1 | 2020-12-04 | rosidl_typesupport_c |
Generate the type support for C messages.
Generate the type support for C messages.
|
|
| 1 | 2020-12-04 | rosidl_parser |
The parser for ROS interface files.
The parser for ROS interface files.
|
|
| 2 | 2020-12-04 | rosidl_generator_py |
Generate the ROS interfaces in Python.
Generate the ROS interfaces in Python.
|
|
| 1 | 2020-12-04 | rosidl_generator_cpp |
Generate the ROS interfaces in C++.
Generate the ROS interfaces in C++.
|
|
| 1 | 2020-12-04 | rosidl_generator_c |
Generate the ROS interfaces in C.
Generate the ROS interfaces in C.
|
|
| 1 | 2020-12-04 | rosidl_cmake |
The CMake functionality to invoke code generation for ROS interface files.
The CMake functionality to invoke code generation for ROS interface files.
|
|
| 1 | 2020-12-04 | rosidl_adapter |
API and scripts to parse .msg/.srv/.action files and convert them to .idl.
API and scripts to parse .msg/.srv/.action files and convert them to .idl.
|
|
| 1 | 2020-12-04 | ros2topic |
The topic command for ROS 2 command line tools.
The topic command for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | ros2srv |
The srv command for ROS 2 command line tools.
The srv command for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | ros2service |
The service command for ROS 2 command line tools.
The service command for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | ros2run |
The run command for ROS 2 command line tools.
The run command for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | ros2pkg |
The pkg command for ROS 2 command line tools.
The pkg command for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | ros2param |
The param command for ROS 2 command line tools.
The param command for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | ros2node |
The node command for ROS 2 command line tools.
The node command for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | ros2multicast |
The multicast command for ROS 2 command line tools.
The multicast command for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | ros2msg |
The msg command for ROS 2 command line tools.
The msg command for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | ros2lifecycle_test_fixtures |
Package containing fixture nodes for ros2lifecycle tests
Package containing fixture nodes for ros2lifecycle tests
|
|
| 1 | 2020-12-04 | ros2lifecycle |
The lifecycle command for ROS 2 command line tools.
The lifecycle command for ROS 2 command line tools.
|
|
| 2 | 2020-12-04 | ros2launch |
The launch command for ROS 2 command line tools.
The launch command for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | ros2interface |
The interface command for ROS 2 command line tools
The interface command for ROS 2 command line tools
|
|
| 1 | 2020-12-04 | ros2doctor |
A command line tool to check potential issues in a ROS 2 system
A command line tool to check potential issues in a ROS 2 system
|
|
| 1 | 2020-12-04 | ros2component |
The component command for ROS 2 command line tools.
The component command for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | ros2cli |
Framework for ROS 2 command line tools.
Framework for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | ros2action |
The action command for ROS 2 command line tools.
The action command for ROS 2 command line tools.
|
|
| 1 | 2020-12-04 | rmw_fastrtps_shared_cpp |
Code shared on static and dynamic type support of rmw_fastrtps_cpp.
Code shared on static and dynamic type support of rmw_fastrtps_cpp.
|
|
| 1 | 2020-12-04 | rmw_fastrtps_dynamic_cpp |
Implement the ROS middleware interface using eProsima FastRTPS static code generation in C++.
Implement the ROS middleware interface using eProsima FastRTPS static code generation in C++.
|
|
| 1 | 2020-12-04 | rmw_fastrtps_cpp |
Implement the ROS middleware interface using eProsima FastRTPS static code generation in C++.
Implement the ROS middleware interface using eProsima FastRTPS static code generation in C++.
|
|
| 1 | 2020-12-04 | rmw_connext_shared_cpp |
C++ types and functions shared by the ROS middleware interface to RTI Connext Static and RTI Connext Dynamic.
C++ types and functions shared by the ROS middleware interface to RTI Connext Static and RTI Connext Dynamic.
|
|
| 1 | 2020-12-04 | rmw_connext_cpp |
Implement the ROS middleware interface using RTI Connext static code generation in C++.
Implement the ROS middleware interface using RTI Connext static code generation in C++.
|
|
| 1 | 2020-12-04 | rcutils |
Package containing various utility types and functions for C
Package containing various utility types and functions for C
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | rc_reason_msgs |
Msg and srv definitions for rc_reason_clients
Msg and srv definitions for rc_reason_clients
|
|
| 2 | 2024-12-04 | rc_reason_clients |
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 1 | 2024-12-02 | gtsam |
gtsam
gtsam
|
|
| 1 | 2024-11-28 | rosbridge_test_msgs |
Message and service definitions used in internal tests for rosbridge packages.
Message and service definitions used in internal tests for rosbridge packages.
|
|
| 1 | 2024-11-28 | rosbridge_suite |
Rosbridge provides a JSON API to ROS functionality for non-ROS programs.
There are a variety of front ends that interface with rosbridge, including
a WebSocket server for web browsers to interact with.
Rosbridge_suite is a meta-package containing rosbridge, various front end
packages for rosbridge like a WebSocket package, and helper packages.
Rosbridge provides a JSON API to ROS functionality for non-ROS programs.
There are a variety of front ends that interface with rosbridge, including
a WebSocket server for web browsers to interact with.
Rosbridge_suite is a meta-package containing rosbridge, various front end
packages for rosbridge like a WebSocket package, and helper packages.
|
|
| 1 | 2024-11-28 | rosbridge_server |
A WebSocket interface to rosbridge.
A WebSocket interface to rosbridge.
|
|
| 1 | 2024-11-28 | rosbridge_msgs |
Package containing message files
Package containing message files
|
|
| 1 | 2024-11-28 | rosbridge_library |
The core rosbridge package, responsible for interpreting JSON andperforming
the appropriate ROS action, like subscribe, publish, call service, and
interact with params.
The core rosbridge package, responsible for interpreting JSON andperforming
the appropriate ROS action, like subscribe, publish, call service, and
interact with params.
|
|
| 1 | 2024-11-28 | rosapi_msgs |
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
|
|
| 1 | 2024-11-28 | rosapi |
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
|
|
| 3 | 2024-11-26 | apriltag |
AprilTag detector library
AprilTag detector library
|
|
| 1 | 2024-11-20 | web_video_server |
HTTP Streaming of ROS Image Topics in Multiple Formats
HTTP Streaming of ROS Image Topics in Multiple Formats
|
|
| 1 | 2024-11-13 | xacro |
Xacro (XML Macros)
Xacro is an XML macro language. With xacro, you can construct shorter and more readable XML files by using macros that expand to larger XML expressions.
Xacro (XML Macros)
Xacro is an XML macro language. With xacro, you can construct shorter and more readable XML files by using macros that expand to larger XML expressions.
|
|
| 2 | 2024-11-11 | urdfdom_py |
Python implementation of the URDF parser.
Python implementation of the URDF parser.
|
|
| 1 | 2024-11-08 | costmap_converter_msgs |
Package containing message types for costmap conversion
Package containing message types for costmap conversion
|
|
| 1 | 2024-11-08 | costmap_converter |
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
|
|
| 1 | 2024-10-25 | lanelet2_validation |
Package for sanitizing lanelet maps
Package for sanitizing lanelet maps
|
|
| 1 | 2024-10-25 | lanelet2_traffic_rules |
Package for interpreting traffic rules in a lanelet map
Package for interpreting traffic rules in a lanelet map
|
|
| 1 | 2024-10-25 | lanelet2_routing |
Routing module for lanelet2
Routing module for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_python |
Python bindings for lanelet2
Python bindings for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_projection |
Lanelet2 projection library for lat/lon to local x/y conversion
Lanelet2 projection library for lat/lon to local x/y conversion
|
|
| 1 | 2024-10-25 | lanelet2_matching |
Library to match objects to lanelets
Library to match objects to lanelets
|
|
| 1 | 2024-10-25 | lanelet2_maps |
Example maps in the lanelet2-format
Example maps in the lanelet2-format
|
|
| 1 | 2024-10-25 | lanelet2_io |
Parser/Writer module for lanelet2
Parser/Writer module for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_examples |
Examples for working with Lanelet2
Examples for working with Lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_core |
Lanelet2 core module
Lanelet2 core module
|
|
| 1 | 2024-10-25 | lanelet2 |
Meta-package for lanelet2
Meta-package for lanelet2
|
|
| 1 | 2024-10-17 | foonathan_memory_vendor |
Foonathan/memory vendor package for Fast-RTPS.
Foonathan/memory vendor package for Fast-RTPS.
|
|
| 1 | 2024-09-20 | mrt_cmake_modules |
CMake Functions and Modules for automating CMake
CMake Functions and Modules for automating CMake
|
|
| 1 | 2024-07-30 | rcdiscover |
This package contains tools for the discovery of Roboception devices via GigE Vision.
This package contains tools for the discovery of Roboception devices via GigE Vision.
|
|
| 2 | 2024-07-23 | vision_msgs_rviz_plugins |
RVIZ2 plugins for visualizing vision_msgs
RVIZ2 plugins for visualizing vision_msgs
|
|
| 2 | 2024-07-23 | vision_msgs |
Messages for interfacing with various computer vision pipelines, such as
object detectors.
Messages for interfacing with various computer vision pipelines, such as
object detectors.
|
|
| 4 | 2024-07-07 | apriltag_ros |
AprilTag detection node
AprilTag detection node
|
|
| 1 | 2024-05-25 | nmea_msgs |
The nmea_msgs package contains messages related to data in the NMEA format.
The nmea_msgs package contains messages related to data in the NMEA format.
|
|
| 2 | 2024-04-26 | map_msgs |
This package defines messages commonly used in mapping packages.
This package defines messages commonly used in mapping packages.
|
|
| 1 | 2024-04-26 | eigen3_cmake_module |
Exports a custom CMake module to find Eigen3.
Exports a custom CMake module to find Eigen3.
|
|
| 1 | 2024-04-23 | pcl_msgs |
Package containing PCL (Point Cloud Library)-related ROS messages.
Package containing PCL (Point Cloud Library)-related ROS messages.
|
|
| 1 | 2024-04-04 | geographic_msgs |
ROS messages for Geographic Information Systems.
ROS messages for Geographic Information Systems.
|
|
| 1 | 2024-04-04 | geographic_info |
Geographic information metapackage.
Not needed for wet packages, use only to resolve dry stack
dependencies.
Geographic information metapackage.
Not needed for wet packages, use only to resolve dry stack
dependencies.
|
|
| 1 | 2024-04-04 | geodesy |
Python and C++ interfaces for manipulating geodetic coordinates.
Python and C++ interfaces for manipulating geodetic coordinates.
|
|
| 2 | 2024-04-01 | octovis |
octovis is visualization tool for the OctoMap library based on Qt and libQGLViewer. See
http://octomap.github.io for details.
octovis is visualization tool for the OctoMap library based on Qt and libQGLViewer. See
http://octomap.github.io for details.
|
|
| 2 | 2024-04-01 | octomap |
The OctoMap library implements a 3D occupancy grid mapping approach, providing data structures and mapping algorithms in C++. The map implementation is based on an octree. See
http://octomap.github.io for details.
The OctoMap library implements a 3D occupancy grid mapping approach, providing data structures and mapping algorithms in C++. The map implementation is based on an octree. See
http://octomap.github.io for details.
|
|
| 2 | 2024-04-01 | dynamic_edt_3d |
The dynamicEDT3D library implements an inrementally updatable Euclidean distance transform (EDT) in 3D. It comes with a wrapper to use the OctoMap 3D representation and hooks into the change detection of the OctoMap library to propagate changes to the EDT.
The dynamicEDT3D library implements an inrementally updatable Euclidean distance transform (EDT) in 3D. It comes with a wrapper to use the OctoMap 3D representation and hooks into the change detection of the OctoMap library to propagate changes to the EDT.
|
|
| 2 | 2024-03-25 | object_msgs |
This package defines messages for NCS inference
This package defines messages for NCS inference
|
|
| 2 | 2024-03-15 | cartographer |
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations.
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations.
|
|
| 1 | 2024-03-14 | rc_dynamics_api |
The rc_dynamics_api provides an API for easy handling of the dynamic-state data
streams provided by Roboception's stereo camera with self-localization.
See http://rc-visard.com
Dynamic-state estimates of the rc_visard relate to its self-localization and
ego-motion estimation. These states refer to rc_visard's current pose,
velocity, or acceleration and are published on demand via several data streams.
For a complete list and descriptions of these dynamics states and the
respective data streams please refer to rc_visard's user manual.
The rc_dynamics_api provides an API for easy handling of the dynamic-state data
streams provided by Roboception's stereo camera with self-localization.
See http://rc-visard.com
Dynamic-state estimates of the rc_visard relate to its self-localization and
ego-motion estimation. These states refer to rc_visard's current pose,
velocity, or acceleration and are published on demand via several data streams.
For a complete list and descriptions of these dynamics states and the
respective data streams please refer to rc_visard's user manual.
|
|
| 2 | 2024-03-08 | teleop_twist_keyboard |
A robot-agnostic teleoperation node to convert keyboard commands to Twist
messages.
A robot-agnostic teleoperation node to convert keyboard commands to Twist
messages.
|
|
| 1 | 2024-01-31 | urg_node |
urg_node
urg_node
|
|
| 1 | 2023-08-21 | joint_state_publisher_gui |
This package contains a GUI tool for setting and publishing joint state values for a given URDF.
This package contains a GUI tool for setting and publishing joint state values for a given URDF.
|
|
| 2 | 2023-08-21 | joint_state_publisher |
This package contains a tool for setting and publishing joint state values for a given URDF.
This package contains a tool for setting and publishing joint state values for a given URDF.
|
|
| 1 | 2023-05-26 | urg_node_msgs |
urg_node_msgs
urg_node_msgs
|
|
| 1 | 2023-05-07 | grbl_ros |
ROS2 package to interface with a GRBL serial device
ROS2 package to interface with a GRBL serial device
|
|
| 1 | 2023-04-25 | neobotix_usboard_msgs |
neobotix_usboard package
neobotix_usboard package
|
|
| 1 | 2023-04-25 | mobileye_560_660_msgs |
Message definitions for the Mobileye 560/660
Message definitions for the Mobileye 560/660
|
|
| 1 | 2023-04-25 | kartech_linear_actuator_msgs |
The kartech_linear_actuator_msgs package
The kartech_linear_actuator_msgs package
|
|
| 1 | 2023-04-25 | ibeo_msgs |
The ibeo_msgs package
The ibeo_msgs package
|
|
| 1 | 2023-04-25 | derived_object_msgs |
Abstracted Messages from Perception Modalities
Abstracted Messages from Perception Modalities
|
|
| 1 | 2023-04-25 | delphi_srr_msgs |
Message definitions for the Delphi SRR
Message definitions for the Delphi SRR
|
|
| 1 | 2023-04-25 | delphi_mrr_msgs |
Message definitions for the Delphi MRR
Message definitions for the Delphi MRR
|
|
| 1 | 2023-04-25 | delphi_esr_msgs |
Message definitions for the Delphi ESR
Message definitions for the Delphi ESR
|
|
| 1 | 2023-03-22 | angles |
This package provides a set of simple math utilities to work
with angles. The utilities cover simple things like
normalizing an angle and conversion between degrees and
radians. But even if you're trying to calculate things like
the shortest angular distance between two joint space
positions of your robot, but the joint motion is constrained
by joint limits, this package is what you need. The code in
this package is stable and well tested. There are no plans for
major changes in the near future.
This package provides a set of simple math utilities to work
with angles. The utilities cover simple things like
normalizing an angle and conversion between degrees and
radians. But even if you're trying to calculate things like
the shortest angular distance between two joint space
positions of your robot, but the joint motion is constrained
by joint limits, this package is what you need. The code in
this package is stable and well tested. There are no plans for
major changes in the near future.
|
|
| 1 | 2023-03-16 | rqt_action |
rqt_action provides a feature to introspect all available ROS
action types. By utilizing rqt_msg, the output format is
unified with it and rqt_srv. Note that the actions shown on this plugin
is the ones that are stored on your machine, not on the ROS core your rqt
instance connects to.
rqt_action provides a feature to introspect all available ROS
action types. By utilizing rqt_msg, the output format is
unified with it and rqt_srv. Note that the actions shown on this plugin
is the ones that are stored on your machine, not on the ROS core your rqt
instance connects to.
|
|
| 1 | 2023-02-15 | ros_workspace |
Provides the prefix level environment files for ROS 2 packages.
Provides the prefix level environment files for ROS 2 packages.
|
|
| 1 | 2023-02-07 | py_trees_ros_interfaces |
Interfaces used by py_trees_ros and py_trees_ros_tutorials.
Interfaces used by py_trees_ros and py_trees_ros_tutorials.
|
|
| 1 | 2023-01-07 | realsense_ros2_camera |
The realsense_ros2_camera package
The realsense_ros2_camera package
|
|
| 1 | 2023-01-07 | realsense_camera_msgs |
A package containing realsense camera messages definitions.
A package containing realsense camera messages definitions.
|
|
| 1 | 2022-12-28 | apriltag_msgs |
AprilTag message definitions
AprilTag message definitions
|
|
| 1 | 2022-11-23 | tvm_vendor |
Wrapper around Apache TVM to make it available to the ROS ecosystem.
Wrapper around Apache TVM to make it available to the ROS ecosystem.
|
|
| 1 | 2022-11-23 | fmi_adapter_examples |
Provides small examples for use of the fmi_adapter package
Provides small examples for use of the fmi_adapter package
|
|
| 1 | 2022-11-23 | fmi_adapter |
Wraps FMUs for co-simulation
Wraps FMUs for co-simulation
|
|
| 1 | 2022-09-27 | ecl_tools |
Tools and utilities for ecl development.
Tools and utilities for ecl development.
|
|
| 1 | 2022-09-27 | ecl_license |
Maintains the ecl licenses and also provides an install
target for deploying licenses with the ecl libraries.
Maintains the ecl licenses and also provides an install
target for deploying licenses with the ecl libraries.
|
|
| 1 | 2022-09-27 | ecl_build |
Collection of cmake/make build tools primarily for ecl development itself, but also
contains a few cmake modules useful outside of the ecl.
Collection of cmake/make build tools primarily for ecl development itself, but also
contains a few cmake modules useful outside of the ecl.
|
|
| 1 | 2022-06-22 | ament_download |
CMake macros for downloading files with ament
CMake macros for downloading files with ament
|
|
| 1 | 2022-04-20 | turtlebot3_simulations |
ROS 2 packages for TurtleBot3 simulations
ROS 2 packages for TurtleBot3 simulations
|
|
| 1 | 2022-04-20 | turtlebot3_gazebo |
Gazebo simulation package for the TurtleBot3
Gazebo simulation package for the TurtleBot3
|
|
| 1 | 2022-04-20 | turtlebot3_fake_node |
Package for TurtleBot3 fake node. With this package, simple tests can be done without a robot.
You can do simple tests using this package on rviz without real robots.
Package for TurtleBot3 fake node. With this package, simple tests can be done without a robot.
You can do simple tests using this package on rviz without real robots.
|
|
| 1 | 2022-04-07 | raptor_pdu_msgs |
Power distribution messages for drive-by-wire interface to the New Eagle Raptor DBW kit
Power distribution messages for drive-by-wire interface to the New Eagle Raptor DBW kit
|
|
| 1 | 2022-04-07 | raptor_pdu |
Interface for the New Eagle Multiplex Power Distribution Module (MPDM)
https://store.neweagle.net/product/multiplexed-power-distribution-module-mpdm/
Interface for the New Eagle Multiplex Power Distribution Module (MPDM)
https://store.neweagle.net/product/multiplexed-power-distribution-module-mpdm/
|
|
| 3 | 2022-04-07 | raptor_dbw_msgs |
Messages for drive-by-wire interface to the New Eagle Raptor DBW kit
Messages for drive-by-wire interface to the New Eagle Raptor DBW kit
|
|
| 1 | 2022-04-07 | raptor_dbw_joystick |
Joystick controller that interfaces with raptor_dbw_can node
Joystick controller that interfaces with raptor_dbw_can node
|
|
| 3 | 2022-04-07 | raptor_dbw_can |
CAN translator for drive-by-wire interface to the New Eagle Raptor DBW kit
CAN translator for drive-by-wire interface to the New Eagle Raptor DBW kit
|
|
| 3 | 2022-04-07 | can_dbc_parser |
DBC file interface. Read a DBC file, unpack CAN messages and convert to engineering units, pack values into CAN messages for publishing.
DBC file interface. Read a DBC file, unpack CAN messages and convert to engineering units, pack values into CAN messages for publishing.
|
|
| 1 | 2022-03-03 | autoware_auto_vehicle_msgs |
Interfaces between core Autoware.Auto vehicle components
Interfaces between core Autoware.Auto vehicle components
|
|
| 1 | 2022-03-03 | autoware_auto_system_msgs |
Interfaces between core Autoware.Auto system components
Interfaces between core Autoware.Auto system components
|
|
| 1 | 2022-03-03 | autoware_auto_planning_msgs |
Interfaces between core Autoware.Auto planning components
Interfaces between core Autoware.Auto planning components
|
|
| 1 | 2022-03-03 | autoware_auto_perception_msgs |
Interfaces between core Autoware.Auto perception components
Interfaces between core Autoware.Auto perception components
|
|
| 1 | 2022-03-03 | autoware_auto_msgs |
Interfaces between core Autoware.Auto components
Interfaces between core Autoware.Auto components
|
|
| 1 | 2022-03-03 | autoware_auto_mapping_msgs |
Interfaces between core Autoware.Auto mapping components
Interfaces between core Autoware.Auto mapping components
|
|
| 1 | 2022-03-03 | autoware_auto_geometry_msgs |
Geometry related message definitions in Autoware.Auto
Geometry related message definitions in Autoware.Auto
|
|
| 1 | 2022-03-03 | autoware_auto_debug_msgs |
The autoware_auto_debug_msgs package
The autoware_auto_debug_msgs package
|
|
| 1 | 2022-03-03 | autoware_auto_control_msgs |
Interfaces between core Autoware.Auto control components
Interfaces between core Autoware.Auto control components
|
|
| 1 | 2022-02-17 | rqt_console |
rqt_console provides a GUI plugin for displaying and filtering ROS messages.
rqt_console provides a GUI plugin for displaying and filtering ROS messages.
|
|
| 1 | 2022-02-11 | cyclonedds |
Eclipse Cyclone DDS is a very performant and robust open-source DDS implementation. Cyclone DDS is developed completely in the open as an Eclipse IoT project.
Eclipse Cyclone DDS is a very performant and robust open-source DDS implementation. Cyclone DDS is developed completely in the open as an Eclipse IoT project.
|
|
| 1 | 2022-02-09 | aws_ros2_common |
Common utilities for ROS2 nodes using Amazon Web Services.
Common utilities for ROS2 nodes using Amazon Web Services.
|
|
| 1 | 2022-02-08 | turtlebot3_teleop |
Teleoperation node using keyboard for TurtleBot3.
Teleoperation node using keyboard for TurtleBot3.
|
|
| 1 | 2022-02-08 | turtlebot3_node |
TurtleBot3 driver node that include diff drive controller, odometry and tf node
TurtleBot3 driver node that include diff drive controller, odometry and tf node
|
|
| 1 | 2022-02-08 | turtlebot3_navigation2 |
ROS 2 launch scripts for navigation2
ROS 2 launch scripts for navigation2
|
|
| 1 | 2022-02-08 | turtlebot3_example |
This package provides four basic examples for TurtleBot3 (i.e., interactive marker, object detection, patrol and position control).
This package provides four basic examples for TurtleBot3 (i.e., interactive marker, object detection, patrol and position control).
|
|
| 1 | 2022-02-08 | turtlebot3_description |
3D models of the TurtleBot3 for simulation and visualization
3D models of the TurtleBot3 for simulation and visualization
|
|
| 1 | 2022-02-08 | turtlebot3_cartographer |
ROS 2 launch scripts for cartographer
ROS 2 launch scripts for cartographer
|
|
| 1 | 2022-02-08 | turtlebot3_bringup |
ROS 2 launch scripts for starting the TurtleBot3
ROS 2 launch scripts for starting the TurtleBot3
|
|
| 1 | 2022-02-08 | turtlebot3 |
ROS 2 packages for TurtleBot3
ROS 2 packages for TurtleBot3
|
|
| 1 | 2022-02-08 | tts_interfaces |
Contains message and service definitions used by tts.
Contains message and service definitions used by tts.
|
|
| 2 | 2022-02-08 | tts |
Package enabling a robot to speak with a human voice by providing a Text-To-Speech ROS service
Package enabling a robot to speak with a human voice by providing a Text-To-Speech ROS service
|
|
| 2 | 2022-02-08 | ros_monitoring_msgs |
Messages for publishing monitoring data about ROS systems
Messages for publishing monitoring data about ROS systems
|
|
| 2 | 2022-02-08 | lex_node |
Package providing a ROS node for interacting with Amazon Lex
Package providing a ROS node for interacting with Amazon Lex
|
|
| 2 | 2022-02-08 | lex_common_msgs |
Common messages for interacting with Amazon Lex using the lex_node package
Common messages for interacting with Amazon Lex using the lex_node package
|
|
| 1 | 2022-02-08 | lex_common |
Lex Common utilities, intended for use by Lex clients
Lex Common utilities, intended for use by Lex clients
|
|
| 2 | 2022-02-08 | kinesis_video_streamer |
Kinesis Video Streams producer node
Kinesis Video Streams producer node
|
|
| 2 | 2022-02-08 | kinesis_video_msgs |
Messages for transmitting video frames to Kinesis Video Streams.
Messages for transmitting video frames to Kinesis Video Streams.
|
|
| 1 | 2022-02-08 | kinesis_manager |
AWS Kinesis stream management library intended for use with the Kinesis Video Producer SDK
AWS Kinesis stream management library intended for use with the Kinesis Video Producer SDK
|
|
| 2 | 2022-02-08 | health_metric_collector |
Package providing a ROS node for sending health metrics to Cloudwatch Metrics
Package providing a ROS node for sending health metrics to Cloudwatch Metrics
|
|
| 2 | 2022-02-08 | h264_video_encoder |
ROS2 H264 encoder node
ROS2 H264 encoder node
|
|
| 1 | 2022-02-08 | h264_encoder_core |
Common base code for ROS1/ROS2 H264 encoder node
Common base code for ROS1/ROS2 H264 encoder node
|
|
| 1 | 2022-02-08 | file_management |
AWS CloudWatch management library used to manage offline files.
AWS CloudWatch management library used to manage offline files.
|
|
| 1 | 2022-02-08 | dataflow_lite |
Light version of dataflow libraries
Light version of dataflow libraries
|
|
| 1 | 2022-02-08 | cloudwatch_metrics_common |
Library used by ROS1/2 node to publish metrics
Library used by ROS1/2 node to publish metrics
|
|
| 2 | 2022-02-08 | cloudwatch_metrics_collector |
Subscriber node for the aws/monitoring topic to publish metrics to AWS Cloudwatch
Subscriber node for the aws/monitoring topic to publish metrics to AWS Cloudwatch
|
|
| 1 | 2022-02-08 | cloudwatch_logs_common |
AWS CloudWatch management library used by ROS1/2 node to publish logs to CloudWatch service
AWS CloudWatch management library used by ROS1/2 node to publish logs to CloudWatch service
|
|
| 2 | 2022-02-08 | cloudwatch_logger |
CloudWatch Logger node for publishing logs to AWS CloudWatch Logs
CloudWatch Logger node for publishing logs to AWS CloudWatch Logs
|
|
| 1 | 2022-02-08 | ackermann_msgs |
ROS2 messages for robots using Ackermann steering.
ROS2 messages for robots using Ackermann steering.
|
|
| 1 | 2022-02-07 | aws_common |
Common AWS SDK utilities, intended for use by ROS packages using the AWS SDK
Common AWS SDK utilities, intended for use by ROS packages using the AWS SDK
|
|
| 2 | 2021-10-29 | cartographer_rviz |
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations. This package provides Cartographer's RViz integration.
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations. This package provides Cartographer's RViz integration.
|
|
| 2 | 2021-10-29 | cartographer_ros_msgs |
ROS messages for the cartographer_ros package.
ROS messages for the cartographer_ros package.
|
|
| 2 | 2021-10-29 | cartographer_ros |
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations. This package provides Cartographer's ROS integration.
Cartographer is a system that provides real-time simultaneous localization
and mapping (SLAM) in 2D and 3D across multiple platforms and sensor
configurations. This package provides Cartographer's ROS integration.
|
|
| 1 | 2021-09-21 | robomaker_simulation_msgs |
AWS RoboMaker package containing ROS service definitions for service endpoints provided inside of an AWS RoboMaker simulation.
AWS RoboMaker package containing ROS service definitions for service endpoints provided inside of an AWS RoboMaker simulation.
|
|
| 1 | 2021-09-21 | aws_robomaker_simulation_ros_pkgs |
AWS RoboMaker package for accessing the simulation service.
AWS RoboMaker package for accessing the simulation service.
|
|
| 1 | 2021-09-21 | aws_robomaker_gazebo_ros |
AWS RoboMaker package containing launch files that facilitate using Gazebo with AWS RoboMaker runtime capabilities.
AWS RoboMaker package containing launch files that facilitate using Gazebo with AWS RoboMaker runtime capabilities.
|
|
| 1 | 2021-09-02 | rmw_gurumdds_shared_cpp |
Code shared on static and dynamic type support of rmw_gurumdds_cpp.
Code shared on static and dynamic type support of rmw_gurumdds_cpp.
|
|
| 1 | 2021-09-02 | rmw_gurumdds_cpp |
Implement the ROS middleware interface using GurumNetworks GurumDDS static code generation in C++.
Implement the ROS middleware interface using GurumNetworks GurumDDS static code generation in C++.
|
|
| 1 | 2021-08-31 | rqt_top |
RQT plugin for monitoring ROS processes.
RQT plugin for monitoring ROS processes.
|
|
| 1 | 2021-08-31 | rqt_srv |
A Python GUI plugin for introspecting available ROS message types.
Note that the srvs available through this plugin is the ones that are stored
on your machine, not on the ROS core your rqt instance connects to.
A Python GUI plugin for introspecting available ROS message types.
Note that the srvs available through this plugin is the ones that are stored
on your machine, not on the ROS core your rqt instance connects to.
|
|
| 1 | 2021-08-31 | rqt_shell |
rqt_shell is a Python GUI plugin providing an interactive shell.
rqt_shell is a Python GUI plugin providing an interactive shell.
|
|
| 1 | 2021-08-31 | rqt_service_caller |
rqt_service_caller provides a GUI plugin for calling arbitrary services.
rqt_service_caller provides a GUI plugin for calling arbitrary services.
|
|
| 1 | 2021-08-31 | rqt_py_console |
rqt_py_console is a Python GUI plugin providing an interactive Python console.
rqt_py_console is a Python GUI plugin providing an interactive Python console.
|
|
| 1 | 2021-08-31 | rqt_py_common |
rqt_py_common provides common functionality for rqt plugins written in Python.
Despite no plugin is provided, this package is part of the rqt_common_plugins
repository to keep refactoring generic functionality from these common plugins
into this package as easy as possible.
Functionality included in this package should cover generic ROS concepts and
should not introduce any special dependencies beside "ros_base".
rqt_py_common provides common functionality for rqt plugins written in Python.
Despite no plugin is provided, this package is part of the rqt_common_plugins
repository to keep refactoring generic functionality from these common plugins
into this package as easy as possible.
Functionality included in this package should cover generic ROS concepts and
should not introduce any special dependencies beside "ros_base".
|
|
| 1 | 2021-08-31 | rqt_gui_py |
rqt_gui_py enables GUI plugins to use the Python client library for ROS.
rqt_gui_py enables GUI plugins to use the Python client library for ROS.
|
|
| 1 | 2021-08-31 | rqt_gui_cpp |
rqt_gui_cpp enables GUI plugins to use the C++ client library for ROS.
rqt_gui_cpp enables GUI plugins to use the C++ client library for ROS.
|
|
| 1 | 2021-08-31 | rqt_gui |
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui.
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui.
|
|
| 1 | 2021-08-31 | rqt |
rqt is a Qt-based framework for GUI development for ROS. It consists of three parts/metapackages
rqt is a Qt-based framework for GUI development for ROS. It consists of three parts/metapackages
|
|
| 2 | 2021-08-25 | automotive_platform_msgs |
Generic Messages for Communication with an Automotive Autonomous Platform
Generic Messages for Communication with an Automotive Autonomous Platform
|
|
| 2 | 2021-08-25 | automotive_navigation_msgs |
Generic Messages for Navigation Objectives in Automotive Automation Software
Generic Messages for Navigation Objectives in Automotive Automation Software
|
|
| 2 | 2021-08-25 | automotive_autonomy_msgs |
Messages for vehicle automation
Messages for vehicle automation
|
|
| 1 | 2021-07-20 | rclc_lifecycle |
rclc lifecycle convenience methods.
rclc lifecycle convenience methods.
|
|
| 1 | 2021-07-20 | rclc_examples |
Example of using rclc_executor
Example of using rclc_executor
|
|
| 1 | 2021-07-20 | rclc |
The ROS client library in C.
The ROS client library in C.
|
|
| 2 | 2021-07-12 | rosauth |
Server Side tools for Authorization and Authentication of ROS Clients
Server Side tools for Authorization and Authentication of ROS Clients
|
|
| 2 | 2021-07-08 | gurumdds_cmake_module |
Provide CMake module to find GurumNetworks GurumDDS.
Provide CMake module to find GurumNetworks GurumDDS.
|
|
| 1 | 2021-06-07 | hls_lfcd_lds_driver |
ROS package for LDS(HLS-LFCD2).
The LDS (Laser Distance Sensor) is a sensor sending the data to Host for the simultaneous localization and mapping (SLAM). Simultaneously the detecting obstacle data can also be sent to Host. HLDS(Hitachi-LG Data Storage) is developing the technology for the moving platform sensor such as Robot Vacuum Cleaners, Home Robot, Robotics Lawn Mower Sensor, etc.
ROS package for LDS(HLS-LFCD2).
The LDS (Laser Distance Sensor) is a sensor sending the data to Host for the simultaneous localization and mapping (SLAM). Simultaneously the detecting obstacle data can also be sent to Host. HLDS(Hitachi-LG Data Storage) is developing the technology for the moving platform sensor such as Robot Vacuum Cleaners, Home Robot, Robotics Lawn Mower Sensor, etc.
|
|
| 2 | 2021-05-21 | visualization_msgs |
A package containing some visualization and interaction related message definitions.
A package containing some visualization and interaction related message definitions.
|
|
| 2 | 2021-05-21 | trajectory_msgs |
A package containing some robot trajectory message definitions.
A package containing some robot trajectory message definitions.
|
|
| 2 | 2021-05-21 | test_launch_ros |
Tests for ROS specific extensions to the launch tool.
Tests for ROS specific extensions to the launch tool.
|
|
| 2 | 2021-05-21 | stereo_msgs |
A package containing some stereo camera related message definitions.
A package containing some stereo camera related message definitions.
|
|
| 3 | 2021-05-21 | std_srvs |
A package containing some standard service definitions.
A package containing some standard service definitions.
|
|
| 2 | 2021-05-21 | std_msgs |
A package containing some standard message definitions.
A package containing some standard message definitions.
|
|
| 2 | 2021-05-21 | shape_msgs |
A package containing some message definitions which describe geometric shapes.
A package containing some message definitions which describe geometric shapes.
|
|
| 2 | 2021-05-21 | sensor_msgs |
A package containing some sensor data related message and service definitions.
A package containing some sensor data related message and service definitions.
|
|
| 1 | 2021-05-21 | rviz_visual_testing_framework |
3D testing framework for RViz.
3D testing framework for RViz.
|
|
| 1 | 2021-05-21 | rviz_rendering_tests |
Example plugin for RViz - documents and tests RViz plugin development
Example plugin for RViz - documents and tests RViz plugin development
|
|
| 1 | 2021-05-21 | rviz_rendering |
Library which provides the 3D rendering functionality in rviz.
Library which provides the 3D rendering functionality in rviz.
|
|
| 1 | 2021-05-21 | rviz_ogre_vendor |
Wrapper around ogre3d, it provides a fixed CMake module and an ExternalProject build of ogre.
Wrapper around ogre3d, it provides a fixed CMake module and an ExternalProject build of ogre.
|
|
| 1 | 2021-05-21 | rviz_default_plugins |
Several default plugins for rviz to cover the basic functionality.
Several default plugins for rviz to cover the basic functionality.
|
|
| 1 | 2021-05-21 | rviz_common |
Common rviz API, used by rviz plugins and applications.
Common rviz API, used by rviz plugins and applications.
|
|
| 1 | 2021-05-21 | rviz_assimp_vendor |
Wrapper around assimp, providing nothing but a dependency on assimp, on some systems.
On others, it provides a fixed CMake module or even an ExternalProject build of assimp.
Wrapper around assimp, providing nothing but a dependency on assimp, on some systems.
On others, it provides a fixed CMake module or even an ExternalProject build of assimp.
|
|
| 1 | 2021-05-21 | rviz2 |
3D visualization tool for ROS.
3D visualization tool for ROS.
|
|
| 2 | 2021-05-21 | ros2launch |
The launch command for ROS 2 command line tools.
The launch command for ROS 2 command line tools.
|
|
| 1 | 2021-05-21 | ros1_bridge |
A simple bridge between ROS 1 and ROS 2
A simple bridge between ROS 1 and ROS 2
|
|
| 1 | 2021-05-21 | rclcpp_lifecycle |
Package containing a prototype for lifecycle implementation
Package containing a prototype for lifecycle implementation
|
|
| 1 | 2021-05-21 | rclcpp_components |
Package containing tools for dynamically loadable components
Package containing tools for dynamically loadable components
|
|
| 1 | 2021-05-21 | rclcpp_action |
Adds action APIs for C++.
Adds action APIs for C++.
|
|
| 1 | 2021-05-21 | rclcpp |
The ROS client library in C++.
The ROS client library in C++.
|
|
| 1 | 2021-05-21 | rcl_yaml_param_parser |
Package containing various utility types and functions for C
Package containing various utility types and functions for C
|
|
| 1 | 2021-05-21 | rcl_lifecycle |
Package containing a C-based lifecycle implementation
Package containing a C-based lifecycle implementation
|
|
| 1 | 2021-05-21 | rcl_action |
Package containing a C-based ROS action implementation
Package containing a C-based ROS action implementation
|
|
| 1 | 2021-05-21 | rcl |
The ROS client library common implementation.
This package contains an API which builds on the ROS middleware API and is optionally built upon by the other ROS client libraries.
The ROS client library common implementation.
This package contains an API which builds on the ROS middleware API and is optionally built upon by the other ROS client libraries.
|
|
| 2 | 2021-05-21 | nav_msgs |
A package containing some navigation related message and service definitions.
A package containing some navigation related message and service definitions.
|
|
| 1 | 2021-05-21 | launch_testing_ros |
A package providing utilities for writing ROS2 enabled launch tests.
A package providing utilities for writing ROS2 enabled launch tests.
|
|
| 2 | 2021-05-21 | launch_ros |
ROS specific extensions to the launch tool.
ROS specific extensions to the launch tool.
|
|
| 2 | 2021-05-21 | geometry_msgs |
A package containing some geometry related message definitions.
A package containing some geometry related message definitions.
|
|
| 2 | 2021-05-21 | diagnostic_msgs |
A package containing some diagnostics related message and service definitions.
A package containing some diagnostics related message and service definitions.
|
|
| 1 | 2021-05-21 | common_interfaces |
common_interfaces contains messages and services that are widely used by other ROS packages.
common_interfaces contains messages and services that are widely used by other ROS packages.
|
|
| 2 | 2021-05-21 | actionlib_msgs |
A package containing some message definitions used in the implementation or actions.
A package containing some message definitions used in the implementation or actions.
|
|
| 2 | 2021-05-18 | rosbag2_bag_v2_plugins |
Package containing storage and converter plugins for rosbag 1
Package containing storage and converter plugins for rosbag 1
|
|
| 2 | 2021-05-18 | ros1_rosbag_storage_vendor |
Vendor package for rosbag_storage of ROS1
Vendor package for rosbag_storage of ROS1
|
|
| 1 | 2021-05-10 | rqt_reconfigure |
This rqt plugin provides a way to view and edit parameters on nodes.
This rqt plugin provides a way to view and edit parameters on nodes.
|
|
| 1 | 2021-04-30 | fmilibrary_vendor |
Wrapper (aka vendor package) around the FMILibrary by Modelon AB (JModelica.org)
Wrapper (aka vendor package) around the FMILibrary by Modelon AB (JModelica.org)
|
|
| 1 | 2021-04-15 | dynamixel_sdk_examples |
ROS2 examples using ROBOTIS DYNAMIXEL SDK
ROS2 examples using ROBOTIS DYNAMIXEL SDK
|
|
| 1 | 2021-04-15 | dynamixel_sdk_custom_interfaces |
ROS2 custom interface examples using ROBOTIS DYNAMIXEL SDK
ROS2 custom interface examples using ROBOTIS DYNAMIXEL SDK
|
|
| 1 | 2021-04-15 | dynamixel_sdk |
This package is wrapping version of ROBOTIS Dynamixel SDK for ROS 2. The ROBOTIS Dynamixel SDK, or SDK, is a software development library that provides Dynamixel control functions for packet communication. The API is designed for Dynamixel actuators and Dynamixel-based platforms.
This package is wrapping version of ROBOTIS Dynamixel SDK for ROS 2. The ROBOTIS Dynamixel SDK, or SDK, is a software development library that provides Dynamixel control functions for packet communication. The API is designed for Dynamixel actuators and Dynamixel-based platforms.
|
|
| 1 | 2021-04-13 | slam_toolbox |
This package provides a sped up improved slam karto with updated SDK and visualization and modification toolsets
This package provides a sped up improved slam karto with updated SDK and visualization and modification toolsets
|
|
| 1 | 2021-04-12 | acado_vendor |
ament package for ACADO toolkit for MPC code generation
ament package for ACADO toolkit for MPC code generation
|
|
| 2 | 2021-04-08 | system_modes_examples |
Simple example system and according launch files for the system_modes
package.
Simple example system and according launch files for the system_modes
package.
|
|
| 2 | 2021-04-08 | system_modes |
The system modes concept assumes that a robotics system is built
from components with a lifecycle. It adds a notion of (sub-)systems,
hiararchically grouping these nodes, as well as a notion of modes
that determine the configuration of these nodes and (sub-)systems in
terms of their parameter values.
The system modes concept assumes that a robotics system is built
from components with a lifecycle. It adds a notion of (sub-)systems,
hiararchically grouping these nodes, as well as a notion of modes
that determine the configuration of these nodes and (sub-)systems in
terms of their parameter values.
|
|
| 1 | 2021-04-07 | turtlebot3_msgs |
Message and service types: custom messages and services for TurtleBot3 packages for ROS2
Message and service types: custom messages and services for TurtleBot3 packages for ROS2
|
|
| 1 | 2021-04-06 | rqt_topic |
rqt_topic provides a GUI plugin for displaying debug information about ROS topics including publishers, subscribers, publishing rate, and ROS Messages.
rqt_topic provides a GUI plugin for displaying debug information about ROS topics including publishers, subscribers, publishing rate, and ROS Messages.
|
|
| 1 | 2021-03-30 | contracts_lite_vendor |
ROS 2 wrapper for the Contracts Lite project.
ROS 2 wrapper for the Contracts Lite project.
|
|
| 1 | 2021-03-18 | robot_localization |
Provides nonlinear state estimation through sensor fusion of an abritrary number of sensors.
Provides nonlinear state estimation through sensor fusion of an abritrary number of sensors.
|
|
| 1 | 2021-02-25 | casadi_vendor |
Wrapper around CasADi to make it available to the ROS ecosystem.
Wrapper around CasADi to make it available to the ROS ecosystem.
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | rc_reason_msgs |
Msg and srv definitions for rc_reason_clients
Msg and srv definitions for rc_reason_clients
|
|
| 2 | 2024-12-04 | rc_reason_clients |
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
|
|
| 1 | 2024-12-04 | coal |
An extension of the Flexible Collision Library.
An extension of the Flexible Collision Library.
|
|
| 1 | 2024-12-03 | pinocchio |
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
|
|
| 1 | 2024-12-03 | osrf_pycommon |
Commonly needed Python modules, used by Python software developed at OSRF.
Commonly needed Python modules, used by Python software developed at OSRF.
|
|
| 1 | 2024-12-03 | eigenpy |
Bindings between Numpy and Eigen using Boost.Python
Bindings between Numpy and Eigen using Boost.Python
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 1 | 2024-12-02 | control_toolbox |
The control toolbox contains modules that are useful across all controllers.
The control toolbox contains modules that are useful across all controllers.
|
|
| 2 | 2024-11-29 | pilz_industrial_motion_planner_testutils |
Helper scripts and functionality to test industrial motion generation
Helper scripts and functionality to test industrial motion generation
|
|
| 2 | 2024-11-29 | pilz_industrial_motion_planner |
MoveIt plugin to generate industrial trajectories PTP, LIN, CIRC and sequences thereof.
MoveIt plugin to generate industrial trajectories PTP, LIN, CIRC and sequences thereof.
|
|
| 2 | 2024-11-29 | moveit_visual_tools |
Helper functions for displaying and debugging MoveIt data in Rviz via published markers
Helper functions for displaying and debugging MoveIt data in Rviz via published markers
|
|
| 3 | 2024-11-29 | moveit_simple_controller_manager |
A generic, simple controller manager plugin for MoveIt.
A generic, simple controller manager plugin for MoveIt.
|
|
| 1 | 2024-11-29 | moveit_setup_srdf_plugins |
SRDF-based plugins for MoveIt Setup Assistant
SRDF-based plugins for MoveIt Setup Assistant
|
|
| 1 | 2024-11-29 | moveit_setup_simulation |
MoveIt Setup Steps for Simulation
MoveIt Setup Steps for Simulation
|
|
| 1 | 2024-11-29 | moveit_setup_framework |
C++ Interface for defining setup steps for MoveIt Setup Assistant
C++ Interface for defining setup steps for MoveIt Setup Assistant
|
|
| 1 | 2024-11-29 | moveit_setup_core_plugins |
Core (meta) plugins for MoveIt Setup Assistant
Core (meta) plugins for MoveIt Setup Assistant
|
|
| 1 | 2024-11-29 | moveit_setup_controllers |
MoveIt Setup Steps for ROS 2 Control
MoveIt Setup Steps for ROS 2 Control
|
|
| 3 | 2024-11-29 | moveit_setup_assistant |
Generates a configuration package that makes it easy to use MoveIt
Generates a configuration package that makes it easy to use MoveIt
|
|
| 1 | 2024-11-29 | moveit_setup_app_plugins |
Various specialty plugins for MoveIt Setup Assistant
Various specialty plugins for MoveIt Setup Assistant
|
|
| 2 | 2024-11-29 | moveit_servo |
Provides real-time manipulator Cartesian and joint servoing.
Provides real-time manipulator Cartesian and joint servoing.
|
|
| 2 | 2024-11-29 | moveit_runtime |
moveit_runtime meta package contains MoveIt packages that are essential for its runtime (e.g. running MoveIt on robots).
moveit_runtime meta package contains MoveIt packages that are essential for its runtime (e.g. running MoveIt on robots).
|
|
| 3 | 2024-11-29 | moveit_ros_warehouse |
Components of MoveIt connecting to MongoDB
Components of MoveIt connecting to MongoDB
|
|
| 3 | 2024-11-29 | moveit_ros_visualization |
Components of MoveIt that offer visualization
Components of MoveIt that offer visualization
|
|
| 1 | 2024-11-29 | moveit_ros_trajectory_cache |
A trajectory cache for MoveIt 2 motion plans and cartesian plans.
A trajectory cache for MoveIt 2 motion plans and cartesian plans.
|
|
| 1 | 2024-11-29 | moveit_ros_tests |
Integration tests for moveit_ros
Integration tests for moveit_ros
|
|
| 3 | 2024-11-29 | moveit_ros_robot_interaction |
Components of MoveIt that offer interaction via interactive markers
Components of MoveIt that offer interaction via interactive markers
|
|
| 3 | 2024-11-29 | moveit_ros_planning_interface |
Components of MoveIt that offer simpler remote (as from another ROS 2 node) interfaces to planning and execution
Components of MoveIt that offer simpler remote (as from another ROS 2 node) interfaces to planning and execution
|
|
| 3 | 2024-11-29 | moveit_ros_planning |
Planning components of MoveIt that use ROS
Planning components of MoveIt that use ROS
|
|
| 3 | 2024-11-29 | moveit_ros_perception |
Components of MoveIt connecting to perception
Components of MoveIt connecting to perception
|
|
| 2 | 2024-11-29 | moveit_ros_occupancy_map_monitor |
Components of MoveIt connecting to occupancy map
Components of MoveIt connecting to occupancy map
|
|
| 3 | 2024-11-29 | moveit_ros_move_group |
The move_group node for MoveIt
The move_group node for MoveIt
|
|
| 2 | 2024-11-29 | moveit_ros_control_interface |
ros_control controller manager interface for MoveIt
ros_control controller manager interface for MoveIt
|
|
| 3 | 2024-11-29 | moveit_ros_benchmarks |
Enhanced tools for benchmarks in MoveIt
Enhanced tools for benchmarks in MoveIt
|
|
| 3 | 2024-11-29 | moveit_ros |
Components of MoveIt that use ROS
Components of MoveIt that use ROS
|
|
| 2 | 2024-11-29 | moveit_resources_prbt_support |
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
|
|
| 2 | 2024-11-29 | moveit_resources_prbt_pg70_support |
PRBT support for Schunk pg70 gripper.
PRBT support for Schunk pg70 gripper.
|
|
| 2 | 2024-11-29 | moveit_resources_prbt_moveit_config |
|
|
| 2 | 2024-11-29 | moveit_resources_prbt_ikfast_manipulator_plugin |
The prbt_ikfast_manipulator_plugin package
The prbt_ikfast_manipulator_plugin package
|
|
| 1 | 2024-11-29 | moveit_resources_pr2_description |
PR2 Resources used for MoveIt! testing
PR2 Resources used for MoveIt! testing
|
|
| 1 | 2024-11-29 | moveit_resources_panda_moveit_config |
|
|
| 1 | 2024-11-29 | moveit_resources_panda_description |
panda Resources used for MoveIt testing
panda Resources used for MoveIt testing
|
|
| 1 | 2024-11-29 | moveit_resources_fanuc_moveit_config |
|
|
| 1 | 2024-11-29 | moveit_resources_fanuc_description |
Fanuc Resources used for MoveIt testing
Fanuc Resources used for MoveIt testing
|
|
| 1 | 2024-11-29 | moveit_resources |
Resources used for MoveIt testing
Resources used for MoveIt testing
|
|
| 1 | 2024-11-29 | moveit_py |
Python binding for MoveIt 2
Python binding for MoveIt 2
|
|
| 3 | 2024-11-29 | moveit_plugins |
Metapackage for MoveIt plugins.
Metapackage for MoveIt plugins.
|
|
| 1 | 2024-11-29 | moveit_planners_stomp |
STOMP Motion Planner for MoveIt
STOMP Motion Planner for MoveIt
|
|
| 3 | 2024-11-29 | moveit_planners_ompl |
MoveIt interface to OMPL
MoveIt interface to OMPL
|
|
| 2 | 2024-11-29 | moveit_planners_chomp |
The interface for using CHOMP within MoveIt
The interface for using CHOMP within MoveIt
|
|
| 3 | 2024-11-29 | moveit_planners |
Meta package that installs all available planners for MoveIt
Meta package that installs all available planners for MoveIt
|
|
| 2 | 2024-11-29 | moveit_kinematics |
Package for all inverse kinematics solvers in MoveIt
Package for all inverse kinematics solvers in MoveIt
|
|
| 1 | 2024-11-29 | moveit_hybrid_planning |
Hybrid planning components of MoveIt 2
Hybrid planning components of MoveIt 2
|
|
| 3 | 2024-11-29 | moveit_core |
Core libraries used by MoveIt
Core libraries used by MoveIt
|
|
| 1 | 2024-11-29 | moveit_configs_utils |
Python library for loading moveit config parameters in launch files
Python library for loading moveit config parameters in launch files
|
|
| 1 | 2024-11-29 | moveit_common |
Common support functionality used throughout MoveIt
Common support functionality used throughout MoveIt
|
|
| 2 | 2024-11-29 | moveit |
Meta package that contains all essential packages of MoveIt 2
Meta package that contains all essential packages of MoveIt 2
|
|
| 1 | 2024-11-29 | geometric_shapes |
This package contains generic definitions of geometric shapes and bodies.
This package contains generic definitions of geometric shapes and bodies.
|
|
| 1 | 2024-11-29 | dual_arm_panda_moveit_config |
|
|
| 3 | 2024-11-29 | chomp_motion_planner |
chomp_motion_planner
chomp_motion_planner
|
|
| 1 | 2024-11-28 | system_fingerprint |
The system_fingerprint package
The system_fingerprint package
|
|
| 1 | 2024-11-28 | rosbridge_test_msgs |
Message and service definitions used in internal tests for rosbridge packages.
Message and service definitions used in internal tests for rosbridge packages.
|
|
| 1 | 2024-11-28 | rosbridge_suite |
Rosbridge provides a JSON API to ROS functionality for non-ROS programs.
There are a variety of front ends that interface with rosbridge, including
a WebSocket server for web browsers to interact with.
Rosbridge_suite is a meta-package containing rosbridge, various front end
packages for rosbridge like a WebSocket package, and helper packages.
Rosbridge provides a JSON API to ROS functionality for non-ROS programs.
There are a variety of front ends that interface with rosbridge, including
a WebSocket server for web browsers to interact with.
Rosbridge_suite is a meta-package containing rosbridge, various front end
packages for rosbridge like a WebSocket package, and helper packages.
|
|
| 1 | 2024-11-28 | rosbridge_server |
A WebSocket interface to rosbridge.
A WebSocket interface to rosbridge.
|
|
| 1 | 2024-11-28 | rosbridge_msgs |
Package containing message files
Package containing message files
|
|
| 1 | 2024-11-28 | rosbridge_library |
The core rosbridge package, responsible for interpreting JSON andperforming
the appropriate ROS action, like subscribe, publish, call service, and
interact with params.
The core rosbridge package, responsible for interpreting JSON andperforming
the appropriate ROS action, like subscribe, publish, call service, and
interact with params.
|
|
| 1 | 2024-11-28 | rosapi_msgs |
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
|
|
| 1 | 2024-11-28 | rosapi |
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
|
|
| 1 | 2024-11-26 | foxglove_msgs |
foxglove_msgs provides visualization messages that are supported by Foxglove.
foxglove_msgs provides visualization messages that are supported by Foxglove.
|
|
| 1 | 2024-11-26 | foxglove_bridge |
ROS Foxglove Bridge
ROS Foxglove Bridge
|
|
| 3 | 2024-11-26 | apriltag |
AprilTag detector library
AprilTag detector library
|
|
| 1 | 2024-11-25 | ur_client_library |
Standalone C++ library for accessing Universal Robots interfaces. This has been forked off the ur_robot_driver.
Standalone C++ library for accessing Universal Robots interfaces. This has been forked off the ur_robot_driver.
|
|
| 1 | 2024-11-25 | log_view |
The log_view package provides a ncurses based terminal GUI for
viewing and filtering published ROS log messages.
This is an alternative to rqt_console and swri_console that doesn't depend
on qt and can be run directly in a terminal.
The log_view package provides a ncurses based terminal GUI for
viewing and filtering published ROS log messages.
This is an alternative to rqt_console and swri_console that doesn't depend
on qt and can be run directly in a terminal.
|
|
| 1 | 2024-11-25 | behaviortree_cpp |
This package provides the Behavior Trees core library.
This package provides the Behavior Trees core library.
|
|
| 1 | 2024-11-24 | plotjuggler |
PlotJuggler: juggle with data
PlotJuggler: juggle with data
|
|
| 1 | 2024-11-23 | magic_enum |
Static reflection for enums (to string, from string, iteration) for modern C++,
work with any enum type without any macro or boilerplate code
Static reflection for enums (to string, from string, iteration) for modern C++,
work with any enum type without any macro or boilerplate code
|
|
| 1 | 2024-11-22 | microstrain_inertial_rqt |
The microstrain_inertial_rqt package provides several RQT widgets to view the status of Microstrain devices
The microstrain_inertial_rqt package provides several RQT widgets to view the status of Microstrain devices
|
|
| 1 | 2024-11-22 | microstrain_inertial_msgs |
A package that contains ROS message corresponding to microstrain message types.
A package that contains ROS message corresponding to microstrain message types.
|
|
| 1 | 2024-11-22 | microstrain_inertial_examples |
Simple examples using the microstrain_inertial_driver for MicroStrain sensors.
Simple examples using the microstrain_inertial_driver for MicroStrain sensors.
|
|
| 1 | 2024-11-22 | microstrain_inertial_driver |
The ros_mscl package provides a driver for the LORD/Microstrain inertial products.
The ros_mscl package provides a driver for the LORD/Microstrain inertial products.
|
|
| 1 | 2024-11-22 | microstrain_inertial_description |
URDF and stl files for MicroStrain sensors.
URDF and stl files for MicroStrain sensors.
|
|
| 1 | 2024-11-21 | simple_launch |
Python helper class for the ROS 2 launch system
Python helper class for the ROS 2 launch system
|
|
| 1 | 2024-11-16 | twist_stamper |
ROS2 package for converting between Twist and TwistStamped messages
ROS2 package for converting between Twist and TwistStamped messages
|
|
| 1 | 2024-11-13 | xacro |
Xacro (XML Macros)
Xacro is an XML macro language. With xacro, you can construct shorter and more readable XML files by using macros that expand to larger XML expressions.
Xacro (XML Macros)
Xacro is an XML macro language. With xacro, you can construct shorter and more readable XML files by using macros that expand to larger XML expressions.
|
|
| 1 | 2024-11-12 | laser_filters |
Assorted filters designed to operate on 2D planar laser scanners,
which use the sensor_msgs/LaserScan type.
Assorted filters designed to operate on 2D planar laser scanners,
which use the sensor_msgs/LaserScan type.
|
|
| 2 | 2024-11-11 | urdfdom_py |
Python implementation of the URDF parser.
Python implementation of the URDF parser.
|
|
| 2 | 2024-11-08 | octomap_msgs |
This package provides messages and serializations / conversion for the
This package provides messages and serializations / conversion for the
|
|
| 1 | 2024-11-07 | backward_ros |
The backward_ros package is a ros wrapper of backward-cpp from https://github.com/bombela/backward-cpp
The backward_ros package is a ros wrapper of backward-cpp from https://github.com/bombela/backward-cpp
|
|
| 2 | 2024-11-06 | plansys2_tools |
A set of tools for monitoring ROS2 Planning System
A set of tools for monitoring ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_tests |
This package contains the tests package for the ROS2 Planning System
This package contains the tests package for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_terminal |
A terminal tool for monitor and manage the ROS2 Planning System
A terminal tool for monitor and manage the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_problem_expert |
This package contains the Problem Expert module for the ROS2 Planning System
This package contains the Problem Expert module for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_popf_plan_solver |
This package contains the PDDL-based Planner module for the ROS2 Planning System
This package contains the PDDL-based Planner module for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_planner |
This package contains the PDDL-based Planner module for the ROS2 Planning System
This package contains the PDDL-based Planner module for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_pddl_parser |
This package contains a library for parsing PDDL domains and problems.
This package derives from the work of Anders Jonsson, contained in https://github.com/wisdompoet/universal-pddl-parser.git
with many modifications by Francisco Martin:
* ROS2 packaging
* Source code structure refactor
* CMakeLists.txt for cmake compilation
* Reading from String instead of files
* Licensing
This package contains a library for parsing PDDL domains and problems.
This package derives from the work of Anders Jonsson, contained in https://github.com/wisdompoet/universal-pddl-parser.git
with many modifications by Francisco Martin:
* ROS2 packaging
* Source code structure refactor
* CMakeLists.txt for cmake compilation
* Reading from String instead of files
* Licensing
|
|
| 2 | 2024-11-06 | plansys2_msgs |
Messages and service files for the ROS2 Planning System
Messages and service files for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_lifecycle_manager |
A controller/manager for the lifecycle nodes of the ROS2 Planning System
A controller/manager for the lifecycle nodes of the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_executor |
This package contains the Executor module for the ROS2 Planning System
This package contains the Executor module for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_domain_expert |
This package contains the Domain Expert module for the ROS2 Planning System
This package contains the Domain Expert module for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_core |
This package contains the PDDL-based core for the ROS2 Planning System
This package contains the PDDL-based core for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_bt_actions |
This package contains the Problem Expert module for the ROS2 Planning System
This package contains the Problem Expert module for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_bringup |
Bringup scripts and configurations for the ROS2 Planning System
Bringup scripts and configurations for the ROS2 Planning System
|
|
| 1 | 2024-11-02 | ublox_ubx_msgs |
UBLOX UBX ROS2 Msgs
UBLOX UBX ROS2 Msgs
|
|
| 1 | 2024-11-02 | ublox_ubx_interfaces |
UBLOX UBX Interfaces
UBLOX UBX Interfaces
|
|
| 1 | 2024-11-02 | ublox_nav_sat_fix_hp_node |
Provides a NavSatFix node for a u-blox GPS GNSS receiver using Gen 9 UBX Protocol
Provides a NavSatFix node for a u-blox GPS GNSS receiver using Gen 9 UBX Protocol
|
|
| 1 | 2024-11-02 | ublox_dgnss_node |
Provides a ublox_gnss node for a u-blox GPS GNSS receiver using Gen 9 UBX Protocol
Provides a ublox_gnss node for a u-blox GPS GNSS receiver using Gen 9 UBX Protocol
|
|
| 1 | 2024-11-02 | ublox_dgnss |
Provides a ublox_dgnss node for a u-blox GPS DGNSS receiver using Gen 9 UBX Protocol
Provides a ublox_dgnss node for a u-blox GPS DGNSS receiver using Gen 9 UBX Protocol
|
|
| 1 | 2024-11-02 | ntrip_client_node |
Publishes RTCM ntrip messages from an external mountpoint
Publishes RTCM ntrip messages from an external mountpoint
|
|
| 1 | 2024-10-31 | velodyne_pointcloud |
Point cloud conversions for Velodyne 3D LIDARs.
Point cloud conversions for Velodyne 3D LIDARs.
|
|
| 1 | 2024-10-31 | velodyne_msgs |
ROS message definitions for Velodyne 3D LIDARs.
ROS message definitions for Velodyne 3D LIDARs.
|
|
| 1 | 2024-10-31 | velodyne_laserscan |
Extract a single ring of a Velodyne PointCloud2 and publish it as a LaserScan message
Extract a single ring of a Velodyne PointCloud2 and publish it as a LaserScan message
|
|
| 1 | 2024-10-31 | velodyne_driver |
ROS device driver for Velodyne 3D LIDARs.
ROS device driver for Velodyne 3D LIDARs.
|
|
| 1 | 2024-10-31 | velodyne |
Basic ROS support for the Velodyne 3D LIDARs.
Basic ROS support for the Velodyne 3D LIDARs.
|
|
| 1 | 2024-10-26 | pose_cov_ops |
C++ library for SE(2)/SE(3) pose composition operations with uncertainty
C++ library for SE(2)/SE(3) pose composition operations with uncertainty
|
|
| 1 | 2024-10-25 | lanelet2_validation |
Package for sanitizing lanelet maps
Package for sanitizing lanelet maps
|
|
| 1 | 2024-10-25 | lanelet2_traffic_rules |
Package for interpreting traffic rules in a lanelet map
Package for interpreting traffic rules in a lanelet map
|
|
| 1 | 2024-10-25 | lanelet2_routing |
Routing module for lanelet2
Routing module for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_python |
Python bindings for lanelet2
Python bindings for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_projection |
Lanelet2 projection library for lat/lon to local x/y conversion
Lanelet2 projection library for lat/lon to local x/y conversion
|
|
| 1 | 2024-10-25 | lanelet2_matching |
Library to match objects to lanelets
Library to match objects to lanelets
|
|
| 1 | 2024-10-25 | lanelet2_maps |
Example maps in the lanelet2-format
Example maps in the lanelet2-format
|
|
| 1 | 2024-10-25 | lanelet2_io |
Parser/Writer module for lanelet2
Parser/Writer module for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_examples |
Examples for working with Lanelet2
Examples for working with Lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_core |
Lanelet2 core module
Lanelet2 core module
|
|
| 1 | 2024-10-25 | lanelet2 |
Meta-package for lanelet2
Meta-package for lanelet2
|
|
| 1 | 2024-10-23 | tile_map |
Tile map provides a slippy map style interface for visualizing
OpenStreetMap and GoogleMap tiles. A mapviz visualization plug-in is also
implemented
Tile map provides a slippy map style interface for visualizing
OpenStreetMap and GoogleMap tiles. A mapviz visualization plug-in is also
implemented
|
|
| 1 | 2024-10-23 | swri_console |
A rosout GUI viewer developed at Southwest Research Institute as an
alternative to rqt_console.
A rosout GUI viewer developed at Southwest Research Institute as an
alternative to rqt_console.
|
|
| 1 | 2024-10-23 | multires_image |
multires_image
multires_image
|
|
| 1 | 2024-10-23 | mavros_msgs |
mavros_msgs defines messages for
mavros_msgs defines messages for
|
|
| 1 | 2024-10-23 | mavros_extras |
Extra nodes and plugins for
Extra nodes and plugins for
|
|
| 1 | 2024-10-23 | mavros |
MAVROS -- MAVLink extendable communication node for ROS
with proxy for Ground Control Station.
MAVROS -- MAVLink extendable communication node for ROS
with proxy for Ground Control Station.
|
|
| 1 | 2024-10-23 | mapviz_plugins |
Common plugins for the Mapviz visualization tool
Common plugins for the Mapviz visualization tool
|
|
| 1 | 2024-10-23 | mapviz_interfaces |
ROS interfaces used by Mapviz
ROS interfaces used by Mapviz
|
|
| 1 | 2024-10-23 | mapviz |
mapviz
mapviz
|
|
| 1 | 2024-10-23 | libmavconn |
MAVLink communication library.
This library provide unified connection handling classes
and URL to connection object mapper.
This library can be used in standalone programs.
MAVLink communication library.
This library provide unified connection handling classes
and URL to connection object mapper.
This library can be used in standalone programs.
|
|
| 1 | 2024-10-22 | simple_actions |
Simple library for using the `rclpy/rclcpp` action libraries
Simple library for using the `rclpy/rclcpp` action libraries
|
|
| 1 | 2024-10-19 | octomap_rviz_plugins |
A set of plugins for displaying occupancy information decoded from binary octomap messages.
A set of plugins for displaying occupancy information decoded from binary octomap messages.
|
|
| 1 | 2024-10-17 | srdfdom |
Parser for Semantic Robot Description Format (SRDF).
Parser for Semantic Robot Description Format (SRDF).
|
|
| 2 | 2024-10-17 | sbg_driver |
ROS driver package for communication with the SBG navigation systems.
ROS driver package for communication with the SBG navigation systems.
|
|
| 1 | 2024-10-17 | moveit_msgs |
Messages, services and actions used by MoveIt
Messages, services and actions used by MoveIt
|
|
| 1 | 2024-10-17 | foonathan_memory_vendor |
Foonathan/memory vendor package for Fast-RTPS.
Foonathan/memory vendor package for Fast-RTPS.
|
|
| 1 | 2024-10-14 | random_numbers |
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
|
|
| 1 | 2024-10-13 | warehouse_ros_sqlite |
Implementation of warehouse_ros for sqlite
Implementation of warehouse_ros for sqlite
|
|
| 1 | 2024-10-09 | mrpt_msgs |
ROS messages for MRPT classes and objects
ROS messages for MRPT classes and objects
|
|
| 1 | 2024-09-25 | ros2_socketcan_msgs |
Messages for SocketCAN
Messages for SocketCAN
|
|
| 1 | 2024-09-25 | ros2_socketcan |
Simple wrapper around SocketCAN
Simple wrapper around SocketCAN
|
|
| 1 | 2024-09-24 | sick_safetyscanners2 |
ROS2 Driver for the SICK safetyscanners
ROS2 Driver for the SICK safetyscanners
|
|
| 1 | 2024-09-24 | performance_test_ros1_publisher |
A ROS1 publisher to use with performance_test
A ROS1 publisher to use with performance_test
|
|
| 1 | 2024-09-24 | performance_test_ros1_msgs |
ROS1 versions of performance_test messages to use when testing with a ROS1 bridge
ROS1 versions of performance_test messages to use when testing with a ROS1 bridge
|
|
| 1 | 2024-09-24 | performance_test |
Tool to test performance of ROS2 and DDS data layers and communication.
Tool to test performance of ROS2 and DDS data layers and communication.
|
|
| 1 | 2024-09-24 | performance_report |
Apex.AI performance_test runner, plotter, and reporter
Apex.AI performance_test runner, plotter, and reporter
|
|
| 1 | 2024-09-20 | mrt_cmake_modules |
CMake Functions and Modules for automating CMake
CMake Functions and Modules for automating CMake
|
|
| 1 | 2024-09-19 | irobot_create_toolbox |
Components and helpers for the iRobot(R) Create(R) 3 Educational Robot.
Components and helpers for the iRobot(R) Create(R) 3 Educational Robot.
|
|
| 1 | 2024-09-19 | irobot_create_nodes |
ROS 2 Nodes for the simulated iRobot(R) Create(R) 3 Educational Robot.
ROS 2 Nodes for the simulated iRobot(R) Create(R) 3 Educational Robot.
|
|
| 1 | 2024-09-19 | irobot_create_gz_toolbox |
Nodes and tools for simulating in Ignition iRobot(R) Create(R) 3 Educational Robot.
Nodes and tools for simulating in Ignition iRobot(R) Create(R) 3 Educational Robot.
|
|
| 1 | 2024-09-19 | irobot_create_gz_sim |
Metapackage for the iRobot(R) Create(R) 3 robot Ignition simulator
Metapackage for the iRobot(R) Create(R) 3 robot Ignition simulator
|
|
| 1 | 2024-09-19 | irobot_create_gz_plugins |
Ignition plugins for simulated iRobot(R) Create(R) 3 Educational Robot.
Ignition plugins for simulated iRobot(R) Create(R) 3 Educational Robot.
|
|
| 1 | 2024-09-19 | irobot_create_gz_bringup |
Provides launch and configuration scripts for a Ignition simulated iRobot(R) Create(R) 3 Educational Robot.
Provides launch and configuration scripts for a Ignition simulated iRobot(R) Create(R) 3 Educational Robot.
|
|
| 1 | 2024-09-19 | irobot_create_description |
Provides the model description for the iRobot(R) Create(R) 3 Educational Robot.
Provides the model description for the iRobot(R) Create(R) 3 Educational Robot.
|
|
| 1 | 2024-09-19 | irobot_create_control |
Provides the diff-drive controller for the iRobot(R) Create(R) 3 Educational Robot.
Provides the diff-drive controller for the iRobot(R) Create(R) 3 Educational Robot.
|
|
| 1 | 2024-09-19 | irobot_create_common_bringup |
Provides common launch and configuration scripts for a simulated iRobot(R) Create(R) 3 Educational Robot.
Provides common launch and configuration scripts for a simulated iRobot(R) Create(R) 3 Educational Robot.
|
|
| 2 | 2024-09-14 | libpointmatcher |
libpointmatcher is a modular ICP library, useful for robotics and computer vision.
libpointmatcher is a modular ICP library, useful for robotics and computer vision.
|
|
| 1 | 2024-09-09 | robot_upstart |
The robot_upstart package provides scripts which may be used to install
and uninstall Ubuntu Linux upstart jobs which launch groups of roslaunch files.
The robot_upstart package provides scripts which may be used to install
and uninstall Ubuntu Linux upstart jobs which launch groups of roslaunch files.
|
|
| 1 | 2024-09-07 | webots_ros2_universal_robot |
Universal Robot ROS2 interface for Webots.
Universal Robot ROS2 interface for Webots.
|
|
| 1 | 2024-09-07 | webots_ros2_turtlebot |
TurtleBot3 Burger robot ROS2 interface for Webots.
TurtleBot3 Burger robot ROS2 interface for Webots.
|
|
| 1 | 2024-09-07 | webots_ros2_tiago |
TIAGo robots ROS2 interface for Webots.
TIAGo robots ROS2 interface for Webots.
|
|
| 1 | 2024-09-07 | webots_ros2_tests |
System tests for `webots_ros2` packages.
System tests for `webots_ros2` packages.
|
|
| 1 | 2024-09-07 | webots_ros2_tesla |
Tesla ROS2 interface for Webots.
Tesla ROS2 interface for Webots.
|
|
| 1 | 2024-09-07 | webots_ros2_msgs |
Services and Messages of the webots_ros2 packages.
Services and Messages of the webots_ros2 packages.
|
|
| 1 | 2024-09-07 | webots_ros2_mavic |
Mavic 2 Pro robot ROS2 interface for Webots.
Mavic 2 Pro robot ROS2 interface for Webots.
|
|
| 1 | 2024-09-07 | webots_ros2_importer |
This package allows to convert URDF and XACRO files into Webots PROTO files.
This package allows to convert URDF and XACRO files into Webots PROTO files.
|
|
| 1 | 2024-09-07 | webots_ros2_epuck |
E-puck2 driver for Webots simulated robot
E-puck2 driver for Webots simulated robot
|
|
| 1 | 2024-09-07 | webots_ros2_driver |
Implementation of the Webots - ROS 2 interface
Implementation of the Webots - ROS 2 interface
|
|
| 1 | 2024-09-07 | webots_ros2_control |
ros2_control plugin for Webots
ros2_control plugin for Webots
|
|
| 1 | 2024-09-07 | webots_ros2 |
Interface between Webots and ROS2
Interface between Webots and ROS2
|
|
| 2 | 2024-09-04 | rviz_visual_tools |
Utility functions for displaying and debugging data in Rviz via published markers
Utility functions for displaying and debugging data in Rviz via published markers
|
|
| 1 | 2024-08-29 | warehouse_ros |
Persistent storage of ROS messages
Persistent storage of ROS messages
|
|
| 1 | 2024-08-28 | warehouse_ros_mongo |
Implementation of warehouse_ros for MongoDB
Implementation of warehouse_ros for MongoDB
|
|
| 1 | 2024-08-21 | depthai |
DepthAI core is a C++ library which comes with firmware and an API to interact with OAK Platform
DepthAI core is a C++ library which comes with firmware and an API to interact with OAK Platform
|
|
| 1 | 2024-08-20 | sick_safetyscanners_base |
Provides an Interface to read the sensor output of a SICK
Safety Scanner
Provides an Interface to read the sensor output of a SICK
Safety Scanner
|
|
| 1 | 2024-08-20 | filters |
This library provides a standardized interface for processing data as a sequence
of filters. This package contains a base class upon which to build specific implementations
as well as an interface which dynamically loads filters based on runtime parameters.
This library provides a standardized interface for processing data as a sequence
of filters. This package contains a base class upon which to build specific implementations
as well as an interface which dynamically loads filters based on runtime parameters.
|
|
| 1 | 2024-08-10 | plotjuggler_ros |
PlotJuggler plugin for ROS
PlotJuggler plugin for ROS
|
|
| 1 | 2024-08-09 | rt_manipulators_examples |
Examples for RT Manipulators C++ Library
Examples for RT Manipulators C++ Library
|
|
| 1 | 2024-08-09 | rt_manipulators_cpp |
RT Manipulators C++ Library
RT Manipulators C++ Library
|
|
| 1 | 2024-08-07 | tf_transformations |
Reimplementation of the tf/transformations.py library for common Python spatial operations
Reimplementation of the tf/transformations.py library for common Python spatial operations
|
|
| 1 | 2024-07-30 | rcdiscover |
This package contains tools for the discovery of Roboception devices via GigE Vision.
This package contains tools for the discovery of Roboception devices via GigE Vision.
|
|
| 1 | 2024-07-02 | udp_msgs |
ROS / ROS2 udp_msgs package
ROS / ROS2 udp_msgs package
|
|
| 1 | 2024-07-02 | octomap_ros |
octomap_ros provides conversion functions between ROS and OctoMap's native types.
This enables a convenvient use of the octomap package in ROS.
octomap_ros provides conversion functions between ROS and OctoMap's native types.
This enables a convenvient use of the octomap package in ROS.
|
|
| 1 | 2024-06-23 | ecl_utilities |
Includes various supporting tools and utilities for c++ programming.
Includes various supporting tools and utilities for c++ programming.
|
|
| 1 | 2024-06-23 | ecl_type_traits |
Extends c++ type traits and implements a few more to boot.
Extends c++ type traits and implements a few more to boot.
|
|
| 1 | 2024-06-23 | ecl_time |
Timing utilities are very dependent on the system api provided for their use.
This package provides a means for handling different timing models. Current support
- posix rt : complete.
- macosx : posix timers only, missing absolute timers.
- win : none.
Timing utilities are very dependent on the system api provided for their use.
This package provides a means for handling different timing models. Current support
- posix rt : complete.
- macosx : posix timers only, missing absolute timers.
- win : none.
|
|
| 1 | 2024-06-23 | ecl_threads |
This package provides the c++ extensions for a variety of threaded
programming tools. These are usually different on different
platforms, so the architecture for a cross-platform framework
is also implemented.
This package provides the c++ extensions for a variety of threaded
programming tools. These are usually different on different
platforms, so the architecture for a cross-platform framework
is also implemented.
|
|
| 1 | 2024-06-23 | ecl_streams |
These are lightweight text streaming classes that connect to standardised
ecl type devices.
These are lightweight text streaming classes that connect to standardised
ecl type devices.
|
|
| 1 | 2024-06-23 | ecl_statistics |
Common statistical structures and algorithms for control systems.
Common statistical structures and algorithms for control systems.
|
|
| 1 | 2024-06-23 | ecl_sigslots |
Provides a signal/slot mechanism (in the same vein as qt sigslots,
boost::signals etc for intra-process communication. These include
some improvements - they do not need a preprocessor, are fully type safe,
allow for simple connections via a posix style string identifier
and are multithread-safe.
Provides a signal/slot mechanism (in the same vein as qt sigslots,
boost::signals etc for intra-process communication. These include
some improvements - they do not need a preprocessor, are fully type safe,
allow for simple connections via a posix style string identifier
and are multithread-safe.
|
|
| 1 | 2024-06-23 | ecl_mpl |
Metaprogramming tools move alot of runtime calculations to be shifted to
compile time. This has only very elementary structures at this stage.
Metaprogramming tools move alot of runtime calculations to be shifted to
compile time. This has only very elementary structures at this stage.
|
|
| 2 | 2024-06-23 | ecl_mobile_robot |
Contains transforms (e.g. differential drive inverse kinematics)
for the various types of mobile robot platforms.
Contains transforms (e.g. differential drive inverse kinematics)
for the various types of mobile robot platforms.
|
|
| 1 | 2024-06-23 | ecl_math |
This package provides simple support to cmath, filling in holes
or redefining in a c++ formulation where desirable.
This package provides simple support to cmath, filling in holes
or redefining in a c++ formulation where desirable.
|
|
| 2 | 2024-06-23 | ecl_manipulators |
Deploys various manipulation algorithms, currently just
feedforward filters (interpolations).
Deploys various manipulation algorithms, currently just
feedforward filters (interpolations).
|
|
| 1 | 2024-06-23 | ecl_linear_algebra |
Ecl frontend to a linear matrix package (currently eigen).
Ecl frontend to a linear matrix package (currently eigen).
|
|
| 1 | 2024-06-23 | ecl_ipc |
Interprocess mechanisms vary greatly across platforms - sysv, posix, win32, there
are more than a few. This package provides an infrastructure to allow for developing
cross platform c++ wrappers around the lower level c api's that handle these
mechanisms. These make it not only easier to utilise such mechanisms, but allow it
to be done consistently across platforms.
Interprocess mechanisms vary greatly across platforms - sysv, posix, win32, there
are more than a few. This package provides an infrastructure to allow for developing
cross platform c++ wrappers around the lower level c api's that handle these
mechanisms. These make it not only easier to utilise such mechanisms, but allow it
to be done consistently across platforms.
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | rc_reason_msgs |
Msg and srv definitions for rc_reason_clients
Msg and srv definitions for rc_reason_clients
|
|
| 2 | 2024-12-04 | rc_reason_clients |
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
|
|
| 2 | 2024-12-04 | mvsim |
A lightweight multivehicle simulation framework.
A lightweight multivehicle simulation framework.
|
|
| 1 | 2024-12-04 | eiquadprog |
Eiquadprog a QP solver using active sets
Eiquadprog a QP solver using active sets
|
|
| 1 | 2024-12-04 | coal |
An extension of the Flexible Collision Library.
An extension of the Flexible Collision Library.
|
|
| 1 | 2024-12-03 | self_test |
self_test
self_test
|
|
| 1 | 2024-12-03 | ros_industrial_cmake_boilerplate |
Contains boilerplate cmake script, macros and utils
Contains boilerplate cmake script, macros and utils
|
|
| 1 | 2024-12-03 | pinocchio |
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
|
|
| 1 | 2024-12-03 | diagnostics |
diagnostics
diagnostics
|
|
| 1 | 2024-12-03 | diagnostic_updater |
diagnostic_updater contains tools for easily updating diagnostics. it is commonly used in device drivers to keep track of the status of output topics, device status, etc.
diagnostic_updater contains tools for easily updating diagnostics. it is commonly used in device drivers to keep track of the status of output topics, device status, etc.
|
|
| 1 | 2024-12-03 | diagnostic_common_diagnostics |
diagnostic_common_diagnostics
diagnostic_common_diagnostics
|
|
| 1 | 2024-12-03 | diagnostic_aggregator |
diagnostic_aggregator
diagnostic_aggregator
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 1 | 2024-12-02 | gtsam |
gtsam
gtsam
|
|
| 2 | 2024-11-29 | pilz_industrial_motion_planner_testutils |
Helper scripts and functionality to test industrial motion generation
Helper scripts and functionality to test industrial motion generation
|
|
| 2 | 2024-11-29 | pilz_industrial_motion_planner |
MoveIt plugin to generate industrial trajectories PTP, LIN, CIRC and sequences thereof.
MoveIt plugin to generate industrial trajectories PTP, LIN, CIRC and sequences thereof.
|
|
| 3 | 2024-11-29 | moveit_simple_controller_manager |
A generic, simple controller manager plugin for MoveIt.
A generic, simple controller manager plugin for MoveIt.
|
|
| 1 | 2024-11-29 | moveit_setup_srdf_plugins |
SRDF-based plugins for MoveIt Setup Assistant
SRDF-based plugins for MoveIt Setup Assistant
|
|
| 1 | 2024-11-29 | moveit_setup_simulation |
MoveIt Setup Steps for Simulation
MoveIt Setup Steps for Simulation
|
|
| 1 | 2024-11-29 | moveit_setup_framework |
C++ Interface for defining setup steps for MoveIt Setup Assistant
C++ Interface for defining setup steps for MoveIt Setup Assistant
|
|
| 1 | 2024-11-29 | moveit_setup_core_plugins |
Core (meta) plugins for MoveIt Setup Assistant
Core (meta) plugins for MoveIt Setup Assistant
|
|
| 1 | 2024-11-29 | moveit_setup_controllers |
MoveIt Setup Steps for ROS 2 Control
MoveIt Setup Steps for ROS 2 Control
|
|
| 3 | 2024-11-29 | moveit_setup_assistant |
Generates a configuration package that makes it easy to use MoveIt
Generates a configuration package that makes it easy to use MoveIt
|
|
| 1 | 2024-11-29 | moveit_setup_app_plugins |
Various specialty plugins for MoveIt Setup Assistant
Various specialty plugins for MoveIt Setup Assistant
|
|
| 2 | 2024-11-29 | moveit_servo |
Provides real-time manipulator Cartesian and joint servoing.
Provides real-time manipulator Cartesian and joint servoing.
|
|
| 2 | 2024-11-29 | moveit_runtime |
moveit_runtime meta package contains MoveIt packages that are essential for its runtime (e.g. running MoveIt on robots).
moveit_runtime meta package contains MoveIt packages that are essential for its runtime (e.g. running MoveIt on robots).
|
|
| 3 | 2024-11-29 | moveit_ros_warehouse |
Components of MoveIt connecting to MongoDB
Components of MoveIt connecting to MongoDB
|
|
| 3 | 2024-11-29 | moveit_ros_visualization |
Components of MoveIt that offer visualization
Components of MoveIt that offer visualization
|
|
| 1 | 2024-11-29 | moveit_ros_trajectory_cache |
A trajectory cache for MoveIt 2 motion plans and cartesian plans.
A trajectory cache for MoveIt 2 motion plans and cartesian plans.
|
|
| 1 | 2024-11-29 | moveit_ros_tests |
Integration tests for moveit_ros
Integration tests for moveit_ros
|
|
| 3 | 2024-11-29 | moveit_ros_robot_interaction |
Components of MoveIt that offer interaction via interactive markers
Components of MoveIt that offer interaction via interactive markers
|
|
| 3 | 2024-11-29 | moveit_ros_planning_interface |
Components of MoveIt that offer simpler remote (as from another ROS 2 node) interfaces to planning and execution
Components of MoveIt that offer simpler remote (as from another ROS 2 node) interfaces to planning and execution
|
|
| 3 | 2024-11-29 | moveit_ros_planning |
Planning components of MoveIt that use ROS
Planning components of MoveIt that use ROS
|
|
| 3 | 2024-11-29 | moveit_ros_perception |
Components of MoveIt connecting to perception
Components of MoveIt connecting to perception
|
|
| 2 | 2024-11-29 | moveit_ros_occupancy_map_monitor |
Components of MoveIt connecting to occupancy map
Components of MoveIt connecting to occupancy map
|
|
| 3 | 2024-11-29 | moveit_ros_move_group |
The move_group node for MoveIt
The move_group node for MoveIt
|
|
| 2 | 2024-11-29 | moveit_ros_control_interface |
ros_control controller manager interface for MoveIt
ros_control controller manager interface for MoveIt
|
|
| 3 | 2024-11-29 | moveit_ros_benchmarks |
Enhanced tools for benchmarks in MoveIt
Enhanced tools for benchmarks in MoveIt
|
|
| 3 | 2024-11-29 | moveit_ros |
Components of MoveIt that use ROS
Components of MoveIt that use ROS
|
|
| 2 | 2024-11-29 | moveit_resources_prbt_support |
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
|
|
| 2 | 2024-11-29 | moveit_resources_prbt_pg70_support |
PRBT support for Schunk pg70 gripper.
PRBT support for Schunk pg70 gripper.
|
|
| 2 | 2024-11-29 | moveit_resources_prbt_moveit_config |
|
|
| 2 | 2024-11-29 | moveit_resources_prbt_ikfast_manipulator_plugin |
The prbt_ikfast_manipulator_plugin package
The prbt_ikfast_manipulator_plugin package
|
|
| 1 | 2024-11-29 | moveit_resources_pr2_description |
PR2 Resources used for MoveIt! testing
PR2 Resources used for MoveIt! testing
|
|
| 1 | 2024-11-29 | moveit_resources_panda_moveit_config |
|
|
| 1 | 2024-11-29 | moveit_resources_panda_description |
panda Resources used for MoveIt testing
panda Resources used for MoveIt testing
|
|
| 1 | 2024-11-29 | moveit_resources_fanuc_moveit_config |
|
|
| 1 | 2024-11-29 | moveit_resources_fanuc_description |
Fanuc Resources used for MoveIt testing
Fanuc Resources used for MoveIt testing
|
|
| 1 | 2024-11-29 | moveit_resources |
Resources used for MoveIt testing
Resources used for MoveIt testing
|
|
| 1 | 2024-11-29 | moveit_py |
Python binding for MoveIt 2
Python binding for MoveIt 2
|
|
| 3 | 2024-11-29 | moveit_plugins |
Metapackage for MoveIt plugins.
Metapackage for MoveIt plugins.
|
|
| 1 | 2024-11-29 | moveit_planners_stomp |
STOMP Motion Planner for MoveIt
STOMP Motion Planner for MoveIt
|
|
| 3 | 2024-11-29 | moveit_planners_ompl |
MoveIt interface to OMPL
MoveIt interface to OMPL
|
|
| 2 | 2024-11-29 | moveit_planners_chomp |
The interface for using CHOMP within MoveIt
The interface for using CHOMP within MoveIt
|
|
| 3 | 2024-11-29 | moveit_planners |
Meta package that installs all available planners for MoveIt
Meta package that installs all available planners for MoveIt
|
|
| 2 | 2024-11-29 | moveit_kinematics |
Package for all inverse kinematics solvers in MoveIt
Package for all inverse kinematics solvers in MoveIt
|
|
| 1 | 2024-11-29 | moveit_hybrid_planning |
Hybrid planning components of MoveIt 2
Hybrid planning components of MoveIt 2
|
|
| 3 | 2024-11-29 | moveit_core |
Core libraries used by MoveIt
Core libraries used by MoveIt
|
|
| 1 | 2024-11-29 | moveit_configs_utils |
Python library for loading moveit config parameters in launch files
Python library for loading moveit config parameters in launch files
|
|
| 1 | 2024-11-29 | moveit_common |
Common support functionality used throughout MoveIt
Common support functionality used throughout MoveIt
|
|
| 2 | 2024-11-29 | moveit |
Meta package that contains all essential packages of MoveIt 2
Meta package that contains all essential packages of MoveIt 2
|
|
| 1 | 2024-11-29 | geometric_shapes |
This package contains generic definitions of geometric shapes and bodies.
This package contains generic definitions of geometric shapes and bodies.
|
|
| 1 | 2024-11-29 | dual_arm_panda_moveit_config |
|
|
| 3 | 2024-11-29 | chomp_motion_planner |
chomp_motion_planner
chomp_motion_planner
|
|
| 1 | 2024-11-28 | tuw_std_msgs |
The tuw_std_msgs package
The tuw_std_msgs package
|
|
| 1 | 2024-11-28 | tuw_object_msgs |
The tuw_object_msgs package. This pkg provides a set of messages used to detect, map and track objects of different types.
The tuw_object_msgs package. This pkg provides a set of messages used to detect, map and track objects of different types.
|
|
| 1 | 2024-11-28 | tuw_object_map_msgs |
The tuw_object_map_msgs package
The tuw_object_map_msgs package
|
|
| 1 | 2024-11-28 | tuw_nav_msgs |
The tuw_nav_msgs package
The tuw_nav_msgs package
|
|
| 1 | 2024-11-28 | tuw_multi_robot_msgs |
The tuw_multi_robot_msgs package contains messages for sending graph, route and sync data over topics.
The tuw_multi_robot_msgs package contains messages for sending graph, route and sync data over topics.
|
|
| 1 | 2024-11-28 | tuw_msgs |
tuw_msgs meta package with write and read file libs for tuw_msgs
tuw_msgs meta package with write and read file libs for tuw_msgs
|
|
| 1 | 2024-11-28 | tuw_graph_msgs |
The tuw_graph_msgs package contains messages for sending graphs.
The tuw_graph_msgs package contains messages for sending graphs.
|
|
| 1 | 2024-11-28 | tuw_geometry_msgs |
The tuw_geometry_msgs package
The tuw_geometry_msgs package
|
|
| 1 | 2024-11-28 | tuw_geo_msgs |
The tuw_geo_msgs package
The tuw_geo_msgs package
|
|
| 1 | 2024-11-28 | tuw_airskin_msgs |
The tuw_airskin_msgs package
The tuw_airskin_msgs package
|
|
| 1 | 2024-11-28 | system_fingerprint |
The system_fingerprint package
The system_fingerprint package
|
|
| 1 | 2024-11-28 | rosbridge_test_msgs |
Message and service definitions used in internal tests for rosbridge packages.
Message and service definitions used in internal tests for rosbridge packages.
|
|
| 1 | 2024-11-28 | rosbridge_suite |
Rosbridge provides a JSON API to ROS functionality for non-ROS programs.
There are a variety of front ends that interface with rosbridge, including
a WebSocket server for web browsers to interact with.
Rosbridge_suite is a meta-package containing rosbridge, various front end
packages for rosbridge like a WebSocket package, and helper packages.
Rosbridge provides a JSON API to ROS functionality for non-ROS programs.
There are a variety of front ends that interface with rosbridge, including
a WebSocket server for web browsers to interact with.
Rosbridge_suite is a meta-package containing rosbridge, various front end
packages for rosbridge like a WebSocket package, and helper packages.
|
|
| 1 | 2024-11-28 | rosbridge_server |
A WebSocket interface to rosbridge.
A WebSocket interface to rosbridge.
|
|
| 1 | 2024-11-28 | rosbridge_msgs |
Package containing message files
Package containing message files
|
|
| 1 | 2024-11-28 | rosbridge_library |
The core rosbridge package, responsible for interpreting JSON andperforming
the appropriate ROS action, like subscribe, publish, call service, and
interact with params.
The core rosbridge package, responsible for interpreting JSON andperforming
the appropriate ROS action, like subscribe, publish, call service, and
interact with params.
|
|
| 1 | 2024-11-28 | rosapi_msgs |
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
|
|
| 1 | 2024-11-28 | rosapi |
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
Provides service calls for getting ros meta-information, like list of
topics, services, params, etc.
|
|
| 1 | 2024-11-26 | foxglove_msgs |
foxglove_msgs provides visualization messages that are supported by Foxglove.
foxglove_msgs provides visualization messages that are supported by Foxglove.
|
|
| 3 | 2024-11-26 | apriltag |
AprilTag detector library
AprilTag detector library
|
|
| 1 | 2024-11-25 | ur_client_library |
Standalone C++ library for accessing Universal Robots interfaces. This has been forked off the ur_robot_driver.
Standalone C++ library for accessing Universal Robots interfaces. This has been forked off the ur_robot_driver.
|
|
| 1 | 2024-11-24 | plotjuggler |
PlotJuggler: juggle with data
PlotJuggler: juggle with data
|
|
| 1 | 2024-11-22 | microstrain_inertial_rqt |
The microstrain_inertial_rqt package provides several RQT widgets to view the status of Microstrain devices
The microstrain_inertial_rqt package provides several RQT widgets to view the status of Microstrain devices
|
|
| 1 | 2024-11-22 | microstrain_inertial_msgs |
A package that contains ROS message corresponding to microstrain message types.
A package that contains ROS message corresponding to microstrain message types.
|
|
| 1 | 2024-11-22 | microstrain_inertial_examples |
Simple examples using the microstrain_inertial_driver for MicroStrain sensors.
Simple examples using the microstrain_inertial_driver for MicroStrain sensors.
|
|
| 1 | 2024-11-22 | microstrain_inertial_driver |
The ros_mscl package provides a driver for the LORD/Microstrain inertial products.
The ros_mscl package provides a driver for the LORD/Microstrain inertial products.
|
|
| 1 | 2024-11-22 | microstrain_inertial_description |
URDF and stl files for MicroStrain sensors.
URDF and stl files for MicroStrain sensors.
|
|
| 1 | 2024-11-21 | simple_launch |
Python helper class for the ROS 2 launch system
Python helper class for the ROS 2 launch system
|
|
| 1 | 2024-11-19 | odom_to_tf_ros2 |
A simple ros2 package (node) that reads an odom topic and generates the equivalent tf connection (transformation). It also provides options to override frame names, or just use the ones in the original odom topic.
A simple ros2 package (node) that reads an odom topic and generates the equivalent tf connection (transformation). It also provides options to override frame names, or just use the ones in the original odom topic.
|
|
| 1 | 2024-11-16 | twist_stamper |
ROS2 package for converting between Twist and TwistStamped messages
ROS2 package for converting between Twist and TwistStamped messages
|
|
| 1 | 2024-11-16 | joy_tester |
Simple GUI tool for testing joysticks/gamepads
Simple GUI tool for testing joysticks/gamepads
|
|
| 1 | 2024-11-13 | xacro |
Xacro (XML Macros)
Xacro is an XML macro language. With xacro, you can construct shorter and more readable XML files by using macros that expand to larger XML expressions.
Xacro (XML Macros)
Xacro is an XML macro language. With xacro, you can construct shorter and more readable XML files by using macros that expand to larger XML expressions.
|
|
| 1 | 2024-11-12 | laser_filters |
Assorted filters designed to operate on 2D planar laser scanners,
which use the sensor_msgs/LaserScan type.
Assorted filters designed to operate on 2D planar laser scanners,
which use the sensor_msgs/LaserScan type.
|
|
| 1 | 2024-11-12 | ds_dbw_msgs |
Drive-by-wire messages
Drive-by-wire messages
|
|
| 1 | 2024-11-12 | ds_dbw_joystick_demo |
Demonstration of drive-by-wire with joystick
Demonstration of drive-by-wire with joystick
|
|
| 1 | 2024-11-12 | ds_dbw_can |
Interface to the Dataspeed Inc. Drive-By-Wire kit
Interface to the Dataspeed Inc. Drive-By-Wire kit
|
|
| 1 | 2024-11-12 | ds_dbw |
Interface to the Dataspeed Inc. Drive-By-Wire kits
Interface to the Dataspeed Inc. Drive-By-Wire kits
|
|
| 2 | 2024-11-08 | octomap_msgs |
This package provides messages and serializations / conversion for the
This package provides messages and serializations / conversion for the
|
|
| 1 | 2024-11-07 | backward_ros |
The backward_ros package is a ros wrapper of backward-cpp from https://github.com/bombela/backward-cpp
The backward_ros package is a ros wrapper of backward-cpp from https://github.com/bombela/backward-cpp
|
|
| 2 | 2024-11-06 | plansys2_tests |
This package contains the tests package for the ROS2 Planning System
This package contains the tests package for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_terminal |
A terminal tool for monitor and manage the ROS2 Planning System
A terminal tool for monitor and manage the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_problem_expert |
This package contains the Problem Expert module for the ROS2 Planning System
This package contains the Problem Expert module for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_popf_plan_solver |
This package contains the PDDL-based Planner module for the ROS2 Planning System
This package contains the PDDL-based Planner module for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_planner |
This package contains the PDDL-based Planner module for the ROS2 Planning System
This package contains the PDDL-based Planner module for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_pddl_parser |
This package contains a library for parsing PDDL domains and problems.
This package derives from the work of Anders Jonsson, contained in https://github.com/wisdompoet/universal-pddl-parser.git
with many modifications by Francisco Martin:
* ROS2 packaging
* Source code structure refactor
* CMakeLists.txt for cmake compilation
* Reading from String instead of files
* Licensing
This package contains a library for parsing PDDL domains and problems.
This package derives from the work of Anders Jonsson, contained in https://github.com/wisdompoet/universal-pddl-parser.git
with many modifications by Francisco Martin:
* ROS2 packaging
* Source code structure refactor
* CMakeLists.txt for cmake compilation
* Reading from String instead of files
* Licensing
|
|
| 2 | 2024-11-06 | plansys2_msgs |
Messages and service files for the ROS2 Planning System
Messages and service files for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_lifecycle_manager |
A controller/manager for the lifecycle nodes of the ROS2 Planning System
A controller/manager for the lifecycle nodes of the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_executor |
This package contains the Executor module for the ROS2 Planning System
This package contains the Executor module for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_domain_expert |
This package contains the Domain Expert module for the ROS2 Planning System
This package contains the Domain Expert module for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_core |
This package contains the PDDL-based core for the ROS2 Planning System
This package contains the PDDL-based core for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_bt_actions |
This package contains the Problem Expert module for the ROS2 Planning System
This package contains the Problem Expert module for the ROS2 Planning System
|
|
| 2 | 2024-11-06 | plansys2_bringup |
Bringup scripts and configurations for the ROS2 Planning System
Bringup scripts and configurations for the ROS2 Planning System
|
|
| 1 | 2024-11-04 | maliput_malidrive |
maliput_malidrive backend
maliput_malidrive backend
|
|
| 1 | 2024-10-31 | maliput |
Maliput
Maliput
|
|
| 1 | 2024-10-30 | eigenpy |
Bindings between Numpy and Eigen using Boost.Python
Bindings between Numpy and Eigen using Boost.Python
|
|
| 1 | 2024-10-26 | pose_cov_ops |
C++ library for SE(2)/SE(3) pose composition operations with uncertainty
C++ library for SE(2)/SE(3) pose composition operations with uncertainty
|
|
| 1 | 2024-10-25 | lanelet2_validation |
Package for sanitizing lanelet maps
Package for sanitizing lanelet maps
|
|
| 1 | 2024-10-25 | lanelet2_traffic_rules |
Package for interpreting traffic rules in a lanelet map
Package for interpreting traffic rules in a lanelet map
|
|
| 1 | 2024-10-25 | lanelet2_routing |
Routing module for lanelet2
Routing module for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_python |
Python bindings for lanelet2
Python bindings for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_projection |
Lanelet2 projection library for lat/lon to local x/y conversion
Lanelet2 projection library for lat/lon to local x/y conversion
|
|
| 1 | 2024-10-25 | lanelet2_matching |
Library to match objects to lanelets
Library to match objects to lanelets
|
|
| 1 | 2024-10-25 | lanelet2_maps |
Example maps in the lanelet2-format
Example maps in the lanelet2-format
|
|
| 1 | 2024-10-25 | lanelet2_io |
Parser/Writer module for lanelet2
Parser/Writer module for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_examples |
Examples for working with Lanelet2
Examples for working with Lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_core |
Lanelet2 core module
Lanelet2 core module
|
|
| 1 | 2024-10-25 | lanelet2 |
Meta-package for lanelet2
Meta-package for lanelet2
|
|
| 1 | 2024-10-25 | clpe_ros |
ROS driver for CANLAB CLPE-G-NVP2650D
ROS driver for CANLAB CLPE-G-NVP2650D
|
|
| 1 | 2024-10-23 | swri_transform_util |
The swri_transform_util package contains utility functions and classes for
transforming between coordinate frames.
The swri_transform_util package contains utility functions and classes for
transforming between coordinate frames.
|
|
| 1 | 2024-10-23 | swri_system_util |
A package with commonly used system utilities.
A package with commonly used system utilities.
|
|
| 1 | 2024-10-23 | swri_serial_util |
Contains nodes and utilities for serial communication in ROS.
Contains nodes and utilities for serial communication in ROS.
|
|
| 1 | 2024-10-23 | swri_route_util |
This library provides functionality to simplify working with the
navigation messages defined in marti_nav_msgs.
This library provides functionality to simplify working with the
navigation messages defined in marti_nav_msgs.
|
|
| 1 | 2024-10-23 | swri_roscpp |
A package that extends rclcpp with some commonly used functionality to reduce boilerplate code.
A package that extends rclcpp with some commonly used functionality to reduce boilerplate code.
|
|
| 1 | 2024-10-23 | swri_opencv_util |
A package with commonly used OpenCV functionality.
A package with commonly used OpenCV functionality.
|
|
| 1 | 2024-10-23 | swri_math_util |
A package with commonly used math utility code.
A package with commonly used math utility code.
|
|
| 1 | 2024-10-23 | swri_image_util |
A package of commonly image manipulation utilities.
A package of commonly image manipulation utilities.
|
|
| 1 | 2024-10-23 | swri_geometry_util |
Commonly used geometry routines, implemented in a ROS friendly package.
Commonly used geometry routines, implemented in a ROS friendly package.
|
|
| 1 | 2024-10-23 | swri_dbw_interface |
This package provides documentation on common interface conventions for
drive-by-wire systems.
This package provides documentation on common interface conventions for
drive-by-wire systems.
|
|
| 1 | 2024-10-23 | swri_console_util |
Utility functions for interacting with console
Utility functions for interacting with console
|
|
| 1 | 2024-10-23 | swri_console |
A rosout GUI viewer developed at Southwest Research Institute as an
alternative to rqt_console.
A rosout GUI viewer developed at Southwest Research Institute as an
alternative to rqt_console.
|
|
| 1 | 2024-10-23 | swri_cli_tools |
Command line tools for introspecting ROS systems
Command line tools for introspecting ROS systems
|
|
| 1 | 2024-10-23 | mavros_msgs |
mavros_msgs defines messages for
mavros_msgs defines messages for
|
|
| 1 | 2024-10-23 | mavros_extras |
Extra nodes and plugins for
Extra nodes and plugins for
|
|
| 1 | 2024-10-23 | mavros |
MAVROS -- MAVLink extendable communication node for ROS
with proxy for Ground Control Station.
MAVROS -- MAVLink extendable communication node for ROS
with proxy for Ground Control Station.
|
|
| 1 | 2024-10-23 | marti_visualization_msgs |
marti_visualization_msgs
marti_visualization_msgs
|
|
| 1 | 2024-10-23 | marti_status_msgs |
marti_status_msgs
marti_status_msgs
|
|
| 1 | 2024-10-23 | marti_sensor_msgs |
marti_sensor_msgs
marti_sensor_msgs
|
|
| 1 | 2024-10-23 | marti_perception_msgs |
marti_perception_msgs
marti_perception_msgs
|
|
| 1 | 2024-10-23 | marti_nav_msgs |
marti_nav_msgs
marti_nav_msgs
|
|
| 1 | 2024-10-23 | marti_introspection_msgs |
marti_introspection_msgs
marti_introspection_msgs
|
|
| 1 | 2024-10-23 | marti_dbw_msgs |
marti_dbw_msgs
marti_dbw_msgs
|
|
| 1 | 2024-10-23 | marti_common_msgs |
marti_common_msgs
marti_common_msgs
|
|
| 1 | 2024-10-23 | marti_can_msgs |
marti_can_msgs
marti_can_msgs
|
|
| 1 | 2024-10-23 | libmavconn |
MAVLink communication library.
This library provide unified connection handling classes
and URL to connection object mapper.
This library can be used in standalone programs.
MAVLink communication library.
This library provide unified connection handling classes
and URL to connection object mapper.
This library can be used in standalone programs.
|
|
| 1 | 2024-10-22 | simple_actions |
Simple library for using the `rclpy/rclcpp` action libraries
Simple library for using the `rclpy/rclcpp` action libraries
|
|
| 1 | 2024-10-19 | octomap_rviz_plugins |
A set of plugins for displaying occupancy information decoded from binary octomap messages.
A set of plugins for displaying occupancy information decoded from binary octomap messages.
|
|
| 1 | 2024-10-17 | srdfdom |
Parser for Semantic Robot Description Format (SRDF).
Parser for Semantic Robot Description Format (SRDF).
|
|
| 2 | 2024-10-17 | sbg_driver |
ROS driver package for communication with the SBG navigation systems.
ROS driver package for communication with the SBG navigation systems.
|
|
| 1 | 2024-10-17 | moveit_msgs |
Messages, services and actions used by MoveIt
Messages, services and actions used by MoveIt
|
|
| 1 | 2024-10-17 | foonathan_memory_vendor |
Foonathan/memory vendor package for Fast-RTPS.
Foonathan/memory vendor package for Fast-RTPS.
|
|
| 1 | 2024-10-15 | openzen_driver |
ROS 2 Driver for LP-Research inertial measurement units and satellite navigation senors
ROS 2 Driver for LP-Research inertial measurement units and satellite navigation senors
|
|
| 1 | 2024-10-14 | random_numbers |
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
|
|
| 1 | 2024-10-13 | warehouse_ros_sqlite |
Implementation of warehouse_ros for sqlite
Implementation of warehouse_ros for sqlite
|
|
| 1 | 2024-10-09 | mrpt_msgs |
ROS messages for MRPT classes and objects
ROS messages for MRPT classes and objects
|
|
| 1 | 2024-10-09 | maliput_integration_tests |
Maliput integration tests.
Maliput integration tests.
|
|
| 1 | 2024-10-08 | dataspeed_can_usb |
Driver to interface with the Dataspeed Inc. USB CAN Tool
Driver to interface with the Dataspeed Inc. USB CAN Tool
|
|
| 1 | 2024-10-08 | dataspeed_can_tools |
CAN bus introspection
CAN bus introspection
|
|
| 1 | 2024-10-08 | dataspeed_can_msgs |
Controller Area Network (CAN) messages
Controller Area Network (CAN) messages
|
|
| 1 | 2024-10-08 | dataspeed_can_msg_filters |
Time synchronize multiple CAN messages to get a single callback
Time synchronize multiple CAN messages to get a single callback
|
|
| 1 | 2024-10-08 | dataspeed_can |
CAN bus tools using Dataspeed hardware
CAN bus tools using Dataspeed hardware
|
|
| 1 | 2024-09-27 | grasping_msgs |
Messages for describing objects and how to grasp them.
Messages for describing objects and how to grasp them.
|
|
| 1 | 2024-09-25 | ros2_socketcan_msgs |
Messages for SocketCAN
Messages for SocketCAN
|
|
| 1 | 2024-09-25 | ros2_socketcan |
Simple wrapper around SocketCAN
Simple wrapper around SocketCAN
|
|
| 1 | 2024-09-24 | sick_safetyscanners2 |
ROS2 Driver for the SICK safetyscanners
ROS2 Driver for the SICK safetyscanners
|
|
| 1 | 2024-09-24 | performance_test_ros1_publisher |
A ROS1 publisher to use with performance_test
A ROS1 publisher to use with performance_test
|
|
| 1 | 2024-09-24 | performance_test_ros1_msgs |
ROS1 versions of performance_test messages to use when testing with a ROS1 bridge
ROS1 versions of performance_test messages to use when testing with a ROS1 bridge
|
|
| 1 | 2024-09-24 | performance_test |
Tool to test performance of ROS2 and DDS data layers and communication.
Tool to test performance of ROS2 and DDS data layers and communication.
|
|
| 1 | 2024-09-24 | performance_report |
Apex.AI performance_test runner, plotter, and reporter
Apex.AI performance_test runner, plotter, and reporter
|
|
| 1 | 2024-09-20 | mrt_cmake_modules |
CMake Functions and Modules for automating CMake
CMake Functions and Modules for automating CMake
|
|
| 2 | 2024-09-14 | libpointmatcher |
libpointmatcher is a modular ICP library, useful for robotics and computer vision.
libpointmatcher is a modular ICP library, useful for robotics and computer vision.
|
|
| 1 | 2024-09-11 | polygon_utils |
Utilities for working with polygons, including triangulation
Utilities for working with polygons, including triangulation
|
|
| 1 | 2024-09-11 | polygon_rviz_plugins |
RViz visualizations for polygons
RViz visualizations for polygons
|
|
| 1 | 2024-09-11 | polygon_msgs |
General purpose two-dimensional polygons. Formerly a part of nav_2d_msgs
General purpose two-dimensional polygons. Formerly a part of nav_2d_msgs
|
|
| 1 | 2024-09-11 | polygon_demos |
Demo of polygon_rviz_plugins
Demo of polygon_rviz_plugins
|
|
| 1 | 2024-09-09 | robot_upstart |
The robot_upstart package provides scripts which may be used to install
and uninstall Ubuntu Linux upstart jobs which launch groups of roslaunch files.
The robot_upstart package provides scripts which may be used to install
and uninstall Ubuntu Linux upstart jobs which launch groups of roslaunch files.
|
|
| 1 | 2024-09-07 | webots_ros2_universal_robot |
Universal Robot ROS2 interface for Webots.
Universal Robot ROS2 interface for Webots.
|
|
| 1 | 2024-09-07 | webots_ros2_turtlebot |
TurtleBot3 Burger robot ROS2 interface for Webots.
TurtleBot3 Burger robot ROS2 interface for Webots.
|
|
| 1 | 2024-09-07 | webots_ros2_tiago |
TIAGo robots ROS2 interface for Webots.
TIAGo robots ROS2 interface for Webots.
|
|
| 1 | 2024-09-07 | webots_ros2_tests |
System tests for `webots_ros2` packages.
System tests for `webots_ros2` packages.
|
|
| 1 | 2024-09-07 | webots_ros2_tesla |
Tesla ROS2 interface for Webots.
Tesla ROS2 interface for Webots.
|
|
| 1 | 2024-09-07 | webots_ros2_msgs |
Services and Messages of the webots_ros2 packages.
Services and Messages of the webots_ros2 packages.
|
|
| 1 | 2024-09-07 | webots_ros2_mavic |
Mavic 2 Pro robot ROS2 interface for Webots.
Mavic 2 Pro robot ROS2 interface for Webots.
|
|
| 1 | 2024-09-07 | webots_ros2_importer |
This package allows to convert URDF and XACRO files into Webots PROTO files.
This package allows to convert URDF and XACRO files into Webots PROTO files.
|
|
| 1 | 2024-09-07 | webots_ros2_epuck |
E-puck2 driver for Webots simulated robot
E-puck2 driver for Webots simulated robot
|
|
| 1 | 2024-09-07 | webots_ros2_driver |
Implementation of the Webots - ROS 2 interface
Implementation of the Webots - ROS 2 interface
|
|
| 1 | 2024-09-07 | webots_ros2_control |
ros2_control plugin for Webots
ros2_control plugin for Webots
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | mvsim |
A lightweight multivehicle simulation framework.
A lightweight multivehicle simulation framework.
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 1 | 2024-12-02 | json_transport |
JSON transport for ROS
JSON transport for ROS
|
|
| 1 | 2024-12-02 | json_msgs |
JSON ROS message
JSON ROS message
|
|
| 1 | 2024-11-28 | bta_tof_driver |
The BTA ROS driver
The BTA ROS driver
|
|
| 1 | 2024-11-25 | urg_stamped |
Precisely stamped URG driver for ROS
Precisely stamped URG driver for ROS
|
|
| 1 | 2024-11-25 | behaviortree_cpp |
This package provides the Behavior Trees core library.
This package provides the Behavior Trees core library.
|
|
| 1 | 2024-11-08 | trajectory_tracker |
Path following control package for wheeled mobile robot
Path following control package for wheeled mobile robot
|
|
| 1 | 2024-11-08 | track_odometry |
Odometry slip compensation package
Odometry slip compensation package
|
|
| 1 | 2024-11-08 | safety_limiter |
Motion limiter package for collision prevention
Motion limiter package for collision prevention
|
|
| 1 | 2024-11-08 | planner_cspace |
3-dof configuration space planner for mobile robot
3-dof configuration space planner for mobile robot
|
|
| 1 | 2024-11-08 | obj_to_pointcloud |
OBJ file to pointcloud message converter package
OBJ file to pointcloud message converter package
|
|
| 1 | 2024-11-08 | neonavigation_launch |
Demonstration and sample launch files for neonavigation meta-package
Demonstration and sample launch files for neonavigation meta-package
|
|
| 1 | 2024-11-08 | neonavigation_common |
Common headers for neonavigation meta-package
Common headers for neonavigation meta-package
|
|
| 1 | 2024-11-08 | neonavigation |
The neonavigation meta-package including 3-dof configuration space planner
The neonavigation meta-package including 3-dof configuration space planner
|
|
| 1 | 2024-11-08 | map_organizer |
Layered costmap organizer package
Layered costmap organizer package
|
|
| 1 | 2024-11-08 | joystick_interrupt |
Interrupt cmd_vel by joystick input
Interrupt cmd_vel by joystick input
|
|
| 1 | 2024-11-08 | costmap_cspace |
3-dof configuration space costmap package
3-dof configuration space costmap package
|
|
| 1 | 2024-10-28 | python_orocos_kdl |
This package contains the python bindings PyKDL for the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains the python bindings PyKDL for the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 3 | 2024-10-28 | orocos_kdl |
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 1 | 2024-10-28 | ensenso_driver |
Driver for Ensenso stereo cameras.
Driver for Ensenso stereo cameras.
|
|
| 1 | 2024-10-28 | ensenso_description |
Description package for Ensenso stereo cameras. This package consists of all current supported camera models.
The Xacro macros, which import the mesh files as stl, accept the following parameters:
- camera name
- collision margin to the camera
Description package for Ensenso stereo cameras. This package consists of all current supported camera models.
The Xacro macros, which import the mesh files as stl, accept the following parameters:
- camera name
- collision margin to the camera
|
|
| 1 | 2024-10-28 | ensenso_camera_test |
Tests for the ensenso_camera package.
Tests for the ensenso_camera package.
|
|
| 1 | 2024-10-28 | ensenso_camera_msgs |
Message definitions for the ensenso_camera package.
Message definitions for the ensenso_camera package.
|
|
| 1 | 2024-10-28 | ensenso_camera |
Driver for Ensenso stereo cameras.
Driver for Ensenso stereo cameras.
|
|
| 2 | 2024-10-18 | variant_topic_tools |
Topic tools for treating messages as variant types.
Topic tools for treating messages as variant types.
|
|
| 2 | 2024-10-18 | variant_msgs |
Variant messages are designed to accommodate the information content of any invariant message. They are truly generic and can freely be converted to and from specific message objects.
Variant messages are designed to accommodate the information content of any invariant message. They are truly generic and can freely be converted to and from specific message objects.
|
|
| 2 | 2024-10-18 | variant |
Meta-package for the universal variant library.
Meta-package for the universal variant library.
|
|
| 2 | 2024-10-18 | rqt_multiplot |
rqt_multiplot provides a GUI plugin for visualizing numeric values in multiple 2D plots using the Qwt plotting backend.
rqt_multiplot provides a GUI plugin for visualizing numeric values in multiple 2D plots using the Qwt plotting backend.
|
|
| 3 | 2024-10-18 | grid_map_visualization |
Configurable tool to visualize grid maps in RViz.
Configurable tool to visualize grid maps in RViz.
|
|
| 3 | 2024-10-18 | grid_map_sdf |
Generates signed distance fields from grid maps.
Generates signed distance fields from grid maps.
|
|
| 3 | 2024-10-18 | grid_map_rviz_plugin |
RViz plugin for displaying grid map messages.
RViz plugin for displaying grid map messages.
|
|
| 3 | 2024-10-18 | grid_map_ros |
ROS interface for the grid map library to manage two-dimensional grid maps with multiple data layers.
ROS interface for the grid map library to manage two-dimensional grid maps with multiple data layers.
|
|
| 3 | 2024-10-18 | grid_map_pcl |
Conversions between grid maps and Point Cloud Library (PCL) types.
Conversions between grid maps and Point Cloud Library (PCL) types.
|
|
| 3 | 2024-10-18 | grid_map_octomap |
Conversions between grid maps and OctoMap types.
Conversions between grid maps and OctoMap types.
|
|
| 3 | 2024-10-18 | grid_map_msgs |
Definition of the multi-layered grid map message type.
Definition of the multi-layered grid map message type.
|
|
| 3 | 2024-10-18 | grid_map_loader |
Loading and publishing grid maps from bag files.
Loading and publishing grid maps from bag files.
|
|
| 3 | 2024-10-18 | grid_map_filters |
Processing grid maps as a sequence of ROS filters.
Processing grid maps as a sequence of ROS filters.
|
|
| 3 | 2024-10-18 | grid_map_demos |
Demo nodes to demonstrate the usage of the grid map library.
Demo nodes to demonstrate the usage of the grid map library.
|
|
| 3 | 2024-10-18 | grid_map_cv |
Conversions between grid maps and OpenCV images.
Conversions between grid maps and OpenCV images.
|
|
| 3 | 2024-10-18 | grid_map_costmap_2d |
Interface for grid maps to the costmap_2d format.
Interface for grid maps to the costmap_2d format.
|
|
| 3 | 2024-10-18 | grid_map_core |
Universal grid map library to manage two-dimensional grid maps with multiple data layers.
Universal grid map library to manage two-dimensional grid maps with multiple data layers.
|
|
| 3 | 2024-10-18 | grid_map |
Meta-package for the universal grid map library.
Meta-package for the universal grid map library.
|
|
| 1 | 2024-10-15 | mcl_3dl |
3-D/6-DOF localization for mobile robots with 3-D LIDAR(s)
3-D/6-DOF localization for mobile robots with 3-D LIDAR(s)
|
|
| 1 | 2024-10-13 | random_numbers |
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
|
|
| 1 | 2024-10-13 | agni_tf_tools |
This package provides a gui program as well as a rviz plugin to publish static transforms.
Both support the transformation between various Euler angle representations.
The rviz plugin also allows to configure the transform with an interactive marker.
This package provides a gui program as well as a rviz plugin to publish static transforms.
Both support the transformation between various Euler angle representations.
The rviz plugin also allows to configure the transform with an interactive marker.
|
|
| 1 | 2024-10-10 | test_mavros |
Tests for MAVROS package
Tests for MAVROS package
|
|
| 2 | 2024-10-10 | robot_self_filter |
Filters the robot's body out of point clouds.
Filters the robot's body out of point clouds.
|
|
| 1 | 2024-10-10 | mavros_msgs |
mavros_msgs defines messages for
mavros_msgs defines messages for
|
|
| 1 | 2024-10-10 | mavros_extras |
Extra nodes and plugins for
Extra nodes and plugins for
|
|
| 1 | 2024-10-10 | mavros |
MAVROS -- MAVLink extendable communication node for ROS
with proxy for Ground Control Station.
MAVROS -- MAVLink extendable communication node for ROS
with proxy for Ground Control Station.
|
|
| 1 | 2024-10-10 | libmavconn |
MAVLink communication library.
This library provide unified connection handling classes
and URL to connection object mapper.
This library can be used in standalone programs.
MAVLink communication library.
This library provide unified connection handling classes
and URL to connection object mapper.
This library can be used in standalone programs.
|
|
| 2 | 2024-10-09 | sbg_driver |
ROS driver package for communication with the SBG navigation systems.
ROS driver package for communication with the SBG navigation systems.
|
|
| 1 | 2024-10-08 | trac_ik_python |
The trac_ik_python package contains a python wrapper using SWIG
for trac_ik_lib
The trac_ik_python package contains a python wrapper using SWIG
for trac_ik_lib
|
|
| 1 | 2024-10-08 | trac_ik_lib |
TRAC-IK is a faster, significantly more reliable drop-in replacement for
KDL's pseudoinverse Jacobian solver.
The TRAC-IK library has a very similar API to KDL's IK solver calls,
except that the user passes a maximum time instead of a maximum number of
search iterations. Additionally, TRAC-IK allows for error tolerances to
be set independently for each Cartesian dimension (x,y,z,roll,pitch.yaw).
TRAC-IK is a faster, significantly more reliable drop-in replacement for
KDL's pseudoinverse Jacobian solver.
The TRAC-IK library has a very similar API to KDL's IK solver calls,
except that the user passes a maximum time instead of a maximum number of
search iterations. Additionally, TRAC-IK allows for error tolerances to
be set independently for each Cartesian dimension (x,y,z,roll,pitch.yaw).
|
|
| 1 | 2024-10-08 | trac_ik_kinematics_plugin |
A MoveIt! Kinematics plugin using TRAC-IK
A MoveIt! Kinematics plugin using TRAC-IK
|
|
| 1 | 2024-10-08 | trac_ik_examples |
This package contains the source code for testing and comparing trac_ik
This package contains the source code for testing and comparing trac_ik
|
|
| 1 | 2024-10-08 | trac_ik |
The ROS packages in this repository were created to provide an improved
alternative Inverse Kinematics solver to the popular inverse Jacobian
methods in KDL. TRAC-IK handles joint-limited chains better than KDL
without increasing solve time.
The ROS packages in this repository were created to provide an improved
alternative Inverse Kinematics solver to the popular inverse Jacobian
methods in KDL. TRAC-IK handles joint-limited chains better than KDL
without increasing solve time.
|
|
| 3 | 2024-09-24 | pr2_ethercat_drivers |
This stack contains drivers for the ethercat system and the peripherals
that connect to it: motor control boards, fingertip sensors, texture
projector, hand accelerometer.
This stack contains drivers for the ethercat system and the peripherals
that connect to it: motor control boards, fingertip sensors, texture
projector, hand accelerometer.
|
|
| 3 | 2024-09-24 | fingertip_pressure |
This package provides access to the PR2 fingertip pressure sensors. This information includes:
This package provides access to the PR2 fingertip pressure sensors. This information includes:
|
|
| 3 | 2024-09-24 | ethercat_hardware |
Package for creating a hardware interface to the robot using the EtherCAT motor controller/driver
Package for creating a hardware interface to the robot using the EtherCAT motor controller/driver
|
|
| 1 | 2024-09-20 | costmap_converter |
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_support |
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_pg70_support |
PRBT support for Schunk pg70 gripper.
PRBT support for Schunk pg70 gripper.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_moveit_config |
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_ikfast_manipulator_plugin |
The prbt_ikfast_manipulator_plugin package
The prbt_ikfast_manipulator_plugin package
|
|
| 1 | 2024-08-29 | moveit_resources_pr2_description |
PR2 Resources used for MoveIt! testing
PR2 Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_panda_moveit_config |
|
|
| 1 | 2024-08-29 | moveit_resources_panda_description |
panda Resources used for MoveIt! testing
panda Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_fanuc_moveit_config |
|
|
| 1 | 2024-08-29 | moveit_resources_fanuc_description |
Fanuc Resources used for MoveIt! testing
Fanuc Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_dual_panda_moveit_config |
An automatically generated package with all the configuration and launch files for using the panda with the MoveIt Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the panda with the MoveIt Motion Planning Framework
|
|
| 1 | 2024-08-29 | moveit_resources |
Resources used for MoveIt! testing
Resources used for MoveIt! testing
|
|
| 1 | 2024-08-13 | sound_play |
sound_play provides a ROS node that translates commands on a ROS topic (
sound_play provides a ROS node that translates commands on a ROS topic (
|
|
| 1 | 2024-08-13 | audio_play |
Outputs audio to a speaker from a source node.
Outputs audio to a speaker from a source node.
|
|
| 1 | 2024-08-13 | audio_common_msgs |
Messages for transmitting audio via ROS
Messages for transmitting audio via ROS
|
|
| 1 | 2024-08-13 | audio_common |
Common code for working with audio in ROS
Common code for working with audio in ROS
|
|
| 1 | 2024-08-13 | audio_capture |
Transports audio from a source to a destination. Audio sources can come
from a microphone or file. The destination can play the audio or save it
to an mp3 file.
Transports audio from a source to a destination. Audio sources can come
from a microphone or file. The destination can play the audio or save it
to an mp3 file.
|
|
| 1 | 2024-08-06 | pr2_tuck_arms_action |
The pr2_tuck_arms_action package
The pr2_tuck_arms_action package
|
|
| 1 | 2024-08-06 | pr2_tilt_laser_interface |
Provides a set of tools/actions for manipulating the pr2's tilting
laser. Simplifies previously complex tasks, such as fetching
a single sweep, given a set of desired parameters for both the laser
driver and tilting platform.
Provides a set of tools/actions for manipulating the pr2's tilting
laser. Simplifies previously complex tasks, such as fetching
a single sweep, given a set of desired parameters for both the laser
driver and tilting platform.
|
|
| 1 | 2024-08-06 | pr2_common_actions |
Various actions which help in moving the arms of the PR2
or getting data from its tilting laser.
Various actions which help in moving the arms of the PR2
or getting data from its tilting laser.
|
|
| 1 | 2024-08-06 | pr2_common_action_msgs |
The pr2_common_action_msgs package
The pr2_common_action_msgs package
|
|
| 1 | 2024-08-06 | pr2_arm_move_ik |
Move the pr2 arm using inverse kinematics
Move the pr2 arm using inverse kinematics
|
|
| 1 | 2024-08-06 | joint_trajectory_generator |
joint_trajectory_generator action takes in a trajectory specified
by a number of joint positions, and it generates a new smooth trajectory
through these joint positions.
joint_trajectory_generator action takes in a trajectory specified
by a number of joint positions, and it generates a new smooth trajectory
through these joint positions.
|
|
| 1 | 2024-08-06 | joint_trajectory_action_tools |
joint_trajectory_action_tools
joint_trajectory_action_tools
|
|
| 1 | 2024-07-22 | open_karto |
Catkinized ROS packaging of the OpenKarto library
Catkinized ROS packaging of the OpenKarto library
|
|
| 1 | 2024-07-17 | urdf_mesh_converter |
Convert urdf mesh.
Convert urdf mesh.
|
|
| 1 | 2024-07-17 | jsk_model_tools |
|
|
| 1 | 2024-07-17 | eusurdf |
urdf models converted from euslisp
urdf models converted from euslisp
|
|
| 1 | 2024-07-17 | euslisp_model_conversion_tester |
euslisp_model_conversion_tester
euslisp_model_conversion_tester
|
|
| 1 | 2024-07-17 | euscollada |
euscollada
euscollada
|
|
| 1 | 2024-07-17 | eus_assimp |
eus_assimp
eus_assimp
|
|
| 1 | 2024-07-10 | zdepth_image_transport |
The zdepth_image_transport package
The zdepth_image_transport package
|
|
| 1 | 2024-07-10 | zdepth |
The zdepth package
The zdepth package
|
|
| 1 | 2024-07-10 | webrtcvad_ros |
This package provides a wrapper node for webrtcvad. It subscribes an audio topic and publish a flag if curretly speeched or not with VAD.
This package provides a wrapper node for webrtcvad. It subscribes an audio topic and publish a flag if curretly speeched or not with VAD.
|
|
| 1 | 2024-07-10 | voice_text |
voice_text (www.voicetext.jp)
voice_text (www.voicetext.jp)
|
|
| 1 | 2024-07-10 | switchbot_ros |
use switchbot with ros
use switchbot with ros
|
|
| 1 | 2024-07-10 | slic |
SLIC-Superpizel ROS Wrapper
This file contains the class elements of the class Slic. This class is an
implementation of the SLIC Superpixel algorithm by Achanta et al. [PAMI'12,
vol. 34, num. 11, pp. 2274-2282].
This implementation is created for the specific purpose of creating
over-segmentations in an OpenCV-based environment.
SLIC-Superpizel ROS Wrapper
This file contains the class elements of the class Slic. This class is an
implementation of the SLIC Superpixel algorithm by Achanta et al. [PAMI'12,
vol. 34, num. 11, pp. 2274-2282].
This implementation is created for the specific purpose of creating
over-segmentations in an OpenCV-based environment.
|
|
| 1 | 2024-07-10 | sesame_ros |
ROS API for Sesame smart lock
ROS API for Sesame smart lock
|
|
| 1 | 2024-07-10 | rqt_py_common |
rqt_py_common provides common functionality for rqt plugins written in Python.
Despite no plugin is provided, this package is part of the rqt_common_plugins
repository to keep refactoring generic functionality from these common plugins
into this package as easy as possible.
Functionality included in this package should cover generic ROS concepts and
should not introduce any special dependencies beside "ros_base".
rqt_py_common provides common functionality for rqt plugins written in Python.
Despite no plugin is provided, this package is part of the rqt_common_plugins
repository to keep refactoring generic functionality from these common plugins
into this package as easy as possible.
Functionality included in this package should cover generic ROS concepts and
should not introduce any special dependencies beside "ros_base".
|
|
| 1 | 2024-07-10 | rqt_gui_py |
rqt_gui_py enables GUI plugins to use the Python client library for ROS.
rqt_gui_py enables GUI plugins to use the Python client library for ROS.
|
|
| 1 | 2024-07-10 | rqt_gui_cpp |
rqt_gui_cpp enables GUI plugins to use the C++ client library for ROS.
rqt_gui_cpp enables GUI plugins to use the C++ client library for ROS.
|
|
| 1 | 2024-07-10 | rqt_gui |
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui.
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui.
|
|
| 1 | 2024-07-10 | rqt |
rqt is a Qt-based framework for GUI development for ROS. It consists of three parts/metapackages
rqt is a Qt-based framework for GUI development for ROS. It consists of three parts/metapackages
|
|
| 1 | 2024-07-10 | rostwitter |
The rostwitter package
The rostwitter package
|
|
| 1 | 2024-07-10 | rosping |
rosping is the tool to send ICMP ECHO_REQUEST to network hosts where roscore is running, and send back to you as rostopic message.
rosping is the tool to send ICMP ECHO_REQUEST to network hosts where roscore is running, and send back to you as rostopic message.
|
|
| 1 | 2024-07-10 | rospatlite |
rospatlite
rospatlite
|
|
| 1 | 2024-07-10 | ros_speech_recognition |
ROS wrapper for Python SpeechRecognition library
ROS wrapper for Python SpeechRecognition library
|
|
| 1 | 2024-07-10 | ros_google_cloud_language |
ros clinet library for google cloud language
ros clinet library for google cloud language
|
|
| 2 | 2024-07-10 | respeaker_ros |
The respeaker_ros package
The respeaker_ros package
|
|
| 1 | 2024-07-10 | pgm_learner |
Parameter/Structure Estimation and Inference for Bayesian Belief Network
Parameter/Structure Estimation and Inference for Bayesian Belief Network
|
|
| 1 | 2024-07-10 | osqp |
ROS wrapper for OSQP
ROS wrapper for OSQP
|
|
| 1 | 2024-07-10 | opt_camera |
opt_camera
opt_camera
|
|
| 1 | 2024-07-10 | nlopt |
nlopt
nlopt
|
|
| 1 | 2024-07-10 | nfc_ros |
The nfc_ros package
The nfc_ros package
|
|
| 1 | 2024-07-10 | mini_maxwell |
mini_maxwell
mini_maxwell
|
|
| 1 | 2024-07-10 | lpg_planner |
lpg_planner: LPGL Planner (http://zeus.ing.unibs.it/lpg/)
lpg_planner: LPGL Planner (http://zeus.ing.unibs.it/lpg/)
|
|
| 1 | 2024-07-10 | libsiftfast |
Library to compute SIFT features
Library to compute SIFT features
|
|
| 1 | 2024-07-10 | libcmt |
libCMT ROS Wrapper
libCMT ROS Wrapper
|
|
| 1 | 2024-07-10 | laser_filters_jsk_patch |
laser_filters_jsk_patch
laser_filters_jsk_patch
|
|
| 1 | 2024-07-10 | julius_ros |
The julius_ros package
The julius_ros package
|
|
| 1 | 2024-07-10 | julius |
julius: Open-Source Large Vocabulary CSR Engine (http://julius.sourceforge.jp/index.php)
julius: Open-Source Large Vocabulary CSR Engine (http://julius.sourceforge.jp/index.php)
|
|
| 1 | 2024-07-10 | jsk_3rdparty |
|
|
| 1 | 2024-07-10 | influxdb_store |
The influxdb_store package
The influxdb_store package
|
|
| 1 | 2024-07-10 | google_cloud_texttospeech |
The google_cloud_texttospeech package
The google_cloud_texttospeech package
|
|
| 1 | 2024-07-10 | google_chat_ros |
Use Google Chat API clients via ROS
Use Google Chat API clients via ROS
|
|
| 1 | 2024-07-10 | gdrive_ros |
Google drive upload and download package
Google drive upload and download package
|
|
| 1 | 2024-07-10 | ffha |
ffha: PDDL Planner (http://ipc.informatik.uni-freiburg.de)
ffha: PDDL Planner (http://ipc.informatik.uni-freiburg.de)
|
|
| 1 | 2024-07-10 | ff |
ff: pddl planner. see http://www.loria.fr/~hoffmanj/ff.html
ff: pddl planner. see http://www.loria.fr/~hoffmanj/ff.html
|
|
| 1 | 2024-07-10 | downward |
fast downward: PDDL Planner (http://www.fast-downward.org)
fast downward: PDDL Planner (http://www.fast-downward.org)
|
|
| 1 | 2024-07-10 | dialogflow_task_executive |
A ROS package for Google Dialogflow and launching apps via Dialogflow
A ROS package for Google Dialogflow and launching apps via Dialogflow
|
|
| 1 | 2024-07-10 | collada_urdf_jsk_patch |
unaccepted patch for collada_urdf
unaccepted patch for collada_urdf
|
|
| 1 | 2024-07-10 | chaplus_ros |
The ROS package for chaplus service
The ROS package for chaplus service
|
|
| 1 | 2024-07-10 | bayesian_belief_networks |
The bayesian_belief_networks package form https://github.com/eBay/bayesian-belief-networks, Authored by Neville Newey, Anzar Afaq, Copyright 2013 eBay Software Foundation
The bayesian_belief_networks package form https://github.com/eBay/bayesian-belief-networks, Authored by Neville Newey, Anzar Afaq, Copyright 2013 eBay Software Foundation
|
|
| 1 | 2024-07-10 | assimp_devel |
assimp library
assimp library
|
|
| 1 | 2024-07-10 | aques_talk |
ROS interface aques_talk demo program
ROS interface aques_talk demo program
|
|
| 1 | 2024-06-19 | sick_safetyscanners |
Provides an Interface to read the sensor output of a SICK
Safety Scanner
Provides an Interface to read the sensor output of a SICK
Safety Scanner
|
|
| 1 | 2024-06-17 | marti_visualization_msgs |
marti_visualization_msgs
marti_visualization_msgs
|
|
| 1 | 2024-06-17 | marti_status_msgs |
marti_status_msgs
marti_status_msgs
|
|
| 1 | 2024-06-17 | marti_sensor_msgs |
marti_sensor_msgs
marti_sensor_msgs
|
|
| 1 | 2024-06-17 | marti_perception_msgs |
marti_perception_msgs
marti_perception_msgs
|
|
| 1 | 2024-06-17 | marti_nav_msgs |
marti_nav_msgs
marti_nav_msgs
|
|
| 1 | 2024-06-17 | marti_introspection_msgs |
marti_introspection_msgs
marti_introspection_msgs
|
|
| 1 | 2024-06-17 | marti_dbw_msgs |
marti_dbw_msgs
marti_dbw_msgs
|
|
| 1 | 2024-06-17 | marti_common_msgs |
marti_common_msgs
marti_common_msgs
|
|
| 1 | 2024-06-17 | marti_can_msgs |
marti_can_msgs
marti_can_msgs
|
|
| 1 | 2024-06-03 | swri_yaml_util |
Provides wrappers around the yaml-cpp library for various utility functions
and to abstract out the API changes made to yaml-cpp between ubuntu:precise
and ubuntu:trusty.
Provides wrappers around the yaml-cpp library for various utility functions
and to abstract out the API changes made to yaml-cpp between ubuntu:precise
and ubuntu:trusty.
|
|
| 1 | 2024-06-03 | swri_transform_util |
The swri_transform_util package contains utility functions and classes for
transforming between coordinate frames.
The swri_transform_util package contains utility functions and classes for
transforming between coordinate frames.
|
|
| 1 | 2024-06-03 | swri_system_util |
swri_system_util
swri_system_util
|
|
| 1 | 2024-06-03 | swri_string_util |
swri_string_util
swri_string_util
|
|
| 1 | 2024-06-03 | swri_serial_util |
swri_serial_util
swri_serial_util
|
|
| 1 | 2024-06-03 | swri_route_util |
This library provides functionality to simplify working with the
navigation messages defined in marti_nav_msgs.
This library provides functionality to simplify working with the
navigation messages defined in marti_nav_msgs.
|
|
| 1 | 2024-06-03 | swri_rospy |
This package provides added functionality on top of rospy, including a
single-threaded callback queue.
This package provides added functionality on top of rospy, including a
single-threaded callback queue.
|
|
| 1 | 2024-06-03 | swri_roscpp |
Enhancements to roscpp functionality to reduce boilerplate code and implement common patterns.
Enhancements to roscpp functionality to reduce boilerplate code and implement common patterns.
|
|
| 1 | 2024-06-03 | swri_prefix_tools |
Contains scripts that are useful as prefix commands for nodes
started by roslaunch.
Contains scripts that are useful as prefix commands for nodes
started by roslaunch.
|
|
| 1 | 2024-06-03 | swri_opencv_util |
swri_opencv_util
swri_opencv_util
|
|
| 1 | 2024-06-03 | swri_nodelet |
This package provides a simple script to write simple launch files
that can easily switch between running nodelets together or as
standalone nodes.
This package provides a simple script to write simple launch files
that can easily switch between running nodelets together or as
standalone nodes.
|
|
| 1 | 2024-06-03 | swri_math_util |
swri_math_util
swri_math_util
|
|
| 1 | 2024-06-03 | swri_image_util |
swri_image_util
swri_image_util
|
|
| 1 | 2024-06-03 | swri_geometry_util |
swri_geometry_util
swri_geometry_util
|
|
| 1 | 2024-06-03 | swri_dbw_interface |
This package provides documentation on common interface conventions for
drive-by-wire systems.
This package provides documentation on common interface conventions for
drive-by-wire systems.
|
|
| 1 | 2024-06-03 | swri_console_util |
swri_console_util
swri_console_util
|
|
| 1 | 2024-06-03 | swri_cli_tools |
rosman contains the rosman tool for introspecting ROS nodes
rosman contains the rosman tool for introspecting ROS nodes
|
|
| 1 | 2024-06-03 | marti_data_structures |
marti_data_structures
marti_data_structures
|
|
| 1 | 2024-05-23 | trajectory_tracker_rviz_plugins |
Rviz plugins for trajectory_tracker_msgs
Rviz plugins for trajectory_tracker_msgs
|
|
| 1 | 2024-05-23 | neonavigation_rviz_plugins |
Rviz plugins for neonavigation package
Rviz plugins for neonavigation package
|
|
| 1 | 2024-05-23 | costmap_cspace_rviz_plugins |
Rviz plugins for costmap_cspace_msgs
Rviz plugins for costmap_cspace_msgs
|
|
| 3 | 2024-05-20 | rplidar_ros |
The rplidar ros package, support rplidar A1/A2/A3/S1/S2/S3/T1/C1
The rplidar ros package, support rplidar A1/A2/A3/S1/S2/S3/T1/C1
|
|
| 2 | 2024-05-15 | gpsd_client |
connects to a GPSd server and broadcasts GPS fixes
using the NavSatFix message
connects to a GPSd server and broadcasts GPS fixes
using the NavSatFix message
|
|
| 2 | 2024-05-15 | gps_umd |
gps_umd metapackage
gps_umd metapackage
|
|
| 2 | 2024-05-15 | gps_common |
GPS messages and common routines for use in GPS drivers
GPS messages and common routines for use in GPS drivers
|
|
| 1 | 2024-05-01 | ypspur |
YP-Spur is a mobile robot motion control software with coordinate frame based commands.
YP-Spur is a mobile robot motion control software with coordinate frame based commands.
|
|
| 2 | 2024-04-29 | flexbe_app |
flexbe_app provides a user interface (editor + runtime control) for the FlexBE behavior engine.
flexbe_app provides a user interface (editor + runtime control) for the FlexBE behavior engine.
|
|
| 3 | 2024-04-26 | rospy_message_converter |
Converts between Python dictionaries and JSON to rospy messages.
Converts between Python dictionaries and JSON to rospy messages.
|
|
| 1 | 2024-04-18 | ypspur_ros |
ROS wrapper for the mobile robot control platform YP-Spur
ROS wrapper for the mobile robot control platform YP-Spur
|
|
| 1 | 2024-04-16 | rqt_shell |
rqt_shell is a Python GUI plugin providing an interactive shell.
rqt_shell is a Python GUI plugin providing an interactive shell.
|
|
| 1 | 2024-04-16 | rosdoc_lite |
This ROS package wraps documentation tools like doxygen, sphinx,
and epydoc, making it convenient to generate ROS package
documentation.
It also generates online documentation for the ROS wiki.
This ROS package wraps documentation tools like doxygen, sphinx,
and epydoc, making it convenient to generate ROS package
documentation.
It also generates online documentation for the ROS wiki.
|
|
| 2 | 2024-04-12 | resource_retriever |
This package retrieves data from url-format files such as http://,
ftp://, package:// file://, etc., and loads the data into memory.
The package:// url for ros packages is translated into a local
file:// url. The resourse retriever was initially designed to load
mesh files into memory, but it can be used for any type of
data. The resource retriever is based on the the libcurl library.
This package retrieves data from url-format files such as http://,
ftp://, package:// file://, etc., and loads the data into memory.
The package:// url for ros packages is translated into a local
file:// url. The resourse retriever was initially designed to load
mesh files into memory, but it can be used for any type of
data. The resource retriever is based on the the libcurl library.
|
|
| 2 | 2024-04-10 | usb_cam |
A ROS Driver for V4L USB Cameras
A ROS Driver for V4L USB Cameras
|
|
| 1 | 2024-04-04 | static_transform_mux |
A helper node that makes sure everybody knows about all static transforms, even if they are published by multiple publishers.
A helper node that makes sure everybody knows about all static transforms, even if they are published by multiple publishers.
|
|
| 2 | 2024-04-01 | octovis |
octovis is visualization tool for the OctoMap library based on Qt and libQGLViewer. See
http://octomap.github.io for details.
octovis is visualization tool for the OctoMap library based on Qt and libQGLViewer. See
http://octomap.github.io for details.
|
|
| 2 | 2024-04-01 | octomap |
The OctoMap library implements a 3D occupancy grid mapping approach, providing data structures and mapping algorithms in C++. The map implementation is based on an octree. See
http://octomap.github.io for details.
The OctoMap library implements a 3D occupancy grid mapping approach, providing data structures and mapping algorithms in C++. The map implementation is based on an octree. See
http://octomap.github.io for details.
|
|
| 2 | 2024-04-01 | dynamic_edt_3d |
The dynamicEDT3D library implements an inrementally updatable Euclidean distance transform (EDT) in 3D. It comes with a wrapper to use the OctoMap 3D representation and hooks into the change detection of the OctoMap library to propagate changes to the EDT.
The dynamicEDT3D library implements an inrementally updatable Euclidean distance transform (EDT) in 3D. It comes with a wrapper to use the OctoMap 3D representation and hooks into the change detection of the OctoMap library to propagate changes to the EDT.
|
|
| 1 | 2024-03-14 | rc_dynamics_api |
The rc_dynamics_api provides an API for easy handling of the dynamic-state data
streams provided by Roboception's stereo camera with self-localization.
See http://rc-visard.com
Dynamic-state estimates of the rc_visard relate to its self-localization and
ego-motion estimation. These states refer to rc_visard's current pose,
velocity, or acceleration and are published on demand via several data streams.
For a complete list and descriptions of these dynamics states and the
respective data streams please refer to rc_visard's user manual.
The rc_dynamics_api provides an API for easy handling of the dynamic-state data
streams provided by Roboception's stereo camera with self-localization.
See http://rc-visard.com
Dynamic-state estimates of the rc_visard relate to its self-localization and
ego-motion estimation. These states refer to rc_visard's current pose,
velocity, or acceleration and are published on demand via several data streams.
For a complete list and descriptions of these dynamics states and the
respective data streams please refer to rc_visard's user manual.
|
|
| 1 | 2024-02-19 | trajectory_tracker_msgs |
Message definitions for trajectory_tracker package
Message definitions for trajectory_tracker package
|
|
| 1 | 2024-02-19 | safety_limiter_msgs |
Message definitions for safety_limiter_msgs package
Message definitions for safety_limiter_msgs package
|
|
| 1 | 2024-02-19 | rqt_rosmon |
rqt GUI for rosmon, the node launcher and monitor for ROS.
rosmon is a replacement for the roslaunch tool, focused on performance,
remote monitoring, and usability.
rqt GUI for rosmon, the node launcher and monitor for ROS.
rosmon is a replacement for the roslaunch tool, focused on performance,
remote monitoring, and usability.
|
|
| 1 | 2024-02-19 | rosmon_msgs |
Messages for rosmon, the node launcher and monitor for ROS.
rosmon is a replacement for the roslaunch tool, focused on performance,
remote monitoring, and usability.
Messages for rosmon, the node launcher and monitor for ROS.
rosmon is a replacement for the roslaunch tool, focused on performance,
remote monitoring, and usability.
|
|
| 1 | 2024-02-19 | rosmon_core |
Node launcher and monitor for ROS. rosmon is a replacement
for the roslaunch tool, focused on performance, remote
monitoring, and usability.
Node launcher and monitor for ROS. rosmon is a replacement
for the roslaunch tool, focused on performance, remote
monitoring, and usability.
|
|
| 1 | 2024-02-19 | rosmon |
Node launcher and monitor for ROS. rosmon is a replacement
for the roslaunch tool, focused on performance, remote
monitoring, and usability.
Node launcher and monitor for ROS. rosmon is a replacement
for the roslaunch tool, focused on performance, remote
monitoring, and usability.
|
|
| 1 | 2024-02-19 | planner_cspace_msgs |
Message definitions for planner_cspace package
Message definitions for planner_cspace package
|
|
| 1 | 2024-02-19 | neonavigation_msgs |
Message definitions for neonavigation package
Message definitions for neonavigation package
|
|
| 1 | 2024-02-19 | neonavigation_metrics_msgs |
Metrics message definitions for neonavigation meta-package
Metrics message definitions for neonavigation meta-package
|
|
| 1 | 2024-02-19 | mcl_3dl_msgs |
The mcl_3dl message definition package
The mcl_3dl message definition package
|
|
| 1 | 2024-02-19 | map_organizer_msgs |
Message definitions for map_organizer_msgs package
Message definitions for map_organizer_msgs package
|
|
| 1 | 2024-02-19 | hokuyo3d |
ROS driver node for HOKUYO 3D LIDARs
ROS driver node for HOKUYO 3D LIDARs
|
|
| 1 | 2024-02-19 | costmap_cspace_msgs |
Message definitions for costmap_cspace package
Message definitions for costmap_cspace package
|
|
| 1 | 2024-02-17 | hector_xacro_tools |
hector_xacro_tools
hector_xacro_tools
|
|
| 1 | 2024-02-17 | hector_sensors_description |
hector_sensors_description contains URDF xacro macros for sensors, so they are easily attachable to robot models and usable in gazebo.
hector_sensors_description contains URDF xacro macros for sensors, so they are easily attachable to robot models and usable in gazebo.
|
|
| 1 | 2024-02-17 | hector_models |
hector_models contains (urdf) models of robots, sensors etc.
hector_models contains (urdf) models of robots, sensors etc.
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | mvsim |
A lightweight multivehicle simulation framework.
A lightweight multivehicle simulation framework.
|
|
| 1 | 2024-12-02 | webargs |
A friendly library for parsing HTTP request arguments, with built-in support for popular web frameworks, including Flask, Django, Bottle, Tornado, Pyramid, webapp2, Falcon, and aiohttp.
A friendly library for parsing HTTP request arguments, with built-in support for popular web frameworks, including Flask, Django, Bottle, Tornado, Pyramid, webapp2, Falcon, and aiohttp.
|
|
| 1 | 2024-11-28 | bta_tof_driver |
The BTA ROS driver
The BTA ROS driver
|
|
| 1 | 2024-11-17 | screen_grab |
Publish a screen capture as an Image
Publish a screen capture as an Image
|
|
| 1 | 2024-11-12 | virtual_force_publisher |
publish end effector's force, which is estmated from joint torque value
publish end effector's force, which is estmated from joint torque value
|
|
| 1 | 2024-11-12 | multi_map_server |
multi_map_server provides the
multi_map_server provides the
|
|
| 1 | 2024-11-12 | jsk_topic_tools |
jsk_topic_tools
jsk_topic_tools
|
|
| 1 | 2024-11-12 | jsk_tools |
Includes emacs scripts, ros tool alias generator, and launch doc generator.
Includes emacs scripts, ros tool alias generator, and launch doc generator.
|
|
| 1 | 2024-11-12 | jsk_tilt_laser |
The jsk_tilt_laser package
The jsk_tilt_laser package
|
|
| 1 | 2024-11-12 | jsk_rosbag_tools |
The rosbag tools
The rosbag tools
|
|
| 1 | 2024-11-12 | jsk_network_tools |
jsk_network_tools
jsk_network_tools
|
|
| 1 | 2024-11-12 | jsk_data |
The jsk_data package
The jsk_data package
|
|
| 1 | 2024-11-12 | jsk_common |
|
|
| 1 | 2024-11-12 | image_view2 |
A simple viewer for ROS image topics with draw-on features
A simple viewer for ROS image topics with draw-on features
|
|
| 1 | 2024-11-12 | dynamic_tf_publisher |
dynamically set the tf trensformation
dynamically set the tf trensformation
|
|
| 1 | 2024-11-12 | audio_video_recorder |
ROS package for recording image and audio synchronously
ROS package for recording image and audio synchronously
|
|
| 1 | 2024-10-29 | sound_classification |
The sound_classification package
The sound_classification package
|
|
| 1 | 2024-10-29 | resized_image_transport |
ROS nodes to publish resized images.
ROS nodes to publish resized images.
|
|
| 1 | 2024-10-29 | jsk_recognition_utils |
C++ library about sensor model, geometrical modeling and perception.
C++ library about sensor model, geometrical modeling and perception.
|
|
| 1 | 2024-10-29 | jsk_recognition_msgs |
ROS messages for jsk_pcl_ros and jsk_perception.
ROS messages for jsk_pcl_ros and jsk_perception.
|
|
| 1 | 2024-10-29 | jsk_recognition |
|
|
| 1 | 2024-10-29 | jsk_perception |
ROS nodes and nodelets for 2-D image perception.
ROS nodes and nodelets for 2-D image perception.
|
|
| 1 | 2024-10-29 | jsk_pcl_ros_utils |
ROS utility nodelets for pointcloud perception.
ROS utility nodelets for pointcloud perception.
|
|
| 1 | 2024-10-29 | jsk_pcl_ros |
ROS nodelets for pointcloud perception.
ROS nodelets for pointcloud perception.
|
|
| 1 | 2024-10-29 | imagesift |
For every image, computes its sift features and send a new message with the image, its intrinsic parameters, and the features.
Parameters include:
display - shows the image on the local computer
For every image, computes its sift features and send a new message with the image, its intrinsic parameters, and the features.
Parameters include:
display - shows the image on the local computer
|
|
| 1 | 2024-10-29 | checkerboard_detector |
Uses opencv to find checkboards and compute their 6D poses with respect to the image. Requires the image to be calibrated.
Uses opencv to find checkboards and compute their 6D poses with respect to the image. Requires the image to be calibrated.
|
|
| 1 | 2024-10-29 | audio_to_spectrogram |
Convert audio (audio_common_msgs/AudioData) to spectrogram (sensor_msgs/Image)
Convert audio (audio_common_msgs/AudioData) to spectrogram (sensor_msgs/Image)
|
|
| 1 | 2024-10-28 | python_orocos_kdl |
This package contains the python bindings PyKDL for the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains the python bindings PyKDL for the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 3 | 2024-10-28 | orocos_kdl |
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 1 | 2024-10-26 | pose_cov_ops |
C++ library for SE(2)/SE(3) pose composition operations with uncertainty
C++ library for SE(2)/SE(3) pose composition operations with uncertainty
|
|
| 2 | 2024-10-18 | variant_topic_tools |
Topic tools for treating messages as variant types.
Topic tools for treating messages as variant types.
|
|
| 2 | 2024-10-18 | variant_msgs |
Variant messages are designed to accommodate the information content of any invariant message. They are truly generic and can freely be converted to and from specific message objects.
Variant messages are designed to accommodate the information content of any invariant message. They are truly generic and can freely be converted to and from specific message objects.
|
|
| 2 | 2024-10-18 | variant |
Meta-package for the universal variant library.
Meta-package for the universal variant library.
|
|
| 2 | 2024-10-18 | rqt_multiplot |
rqt_multiplot provides a GUI plugin for visualizing numeric values in multiple 2D plots using the Qwt plotting backend.
rqt_multiplot provides a GUI plugin for visualizing numeric values in multiple 2D plots using the Qwt plotting backend.
|
|
| 1 | 2024-10-13 | random_numbers |
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
|
|
| 2 | 2024-10-10 | robot_self_filter |
Filters the robot's body out of point clouds.
Filters the robot's body out of point clouds.
|
|
| 1 | 2024-10-08 | trac_ik_python |
The trac_ik_python package contains a python wrapper using SWIG
for trac_ik_lib
The trac_ik_python package contains a python wrapper using SWIG
for trac_ik_lib
|
|
| 1 | 2024-10-08 | trac_ik_lib |
TRAC-IK is a faster, significantly more reliable drop-in replacement for
KDL's pseudoinverse Jacobian solver.
The TRAC-IK library has a very similar API to KDL's IK solver calls,
except that the user passes a maximum time instead of a maximum number of
search iterations. Additionally, TRAC-IK allows for error tolerances to
be set independently for each Cartesian dimension (x,y,z,roll,pitch.yaw).
TRAC-IK is a faster, significantly more reliable drop-in replacement for
KDL's pseudoinverse Jacobian solver.
The TRAC-IK library has a very similar API to KDL's IK solver calls,
except that the user passes a maximum time instead of a maximum number of
search iterations. Additionally, TRAC-IK allows for error tolerances to
be set independently for each Cartesian dimension (x,y,z,roll,pitch.yaw).
|
|
| 1 | 2024-10-08 | trac_ik_kinematics_plugin |
A MoveIt! Kinematics plugin using TRAC-IK
A MoveIt! Kinematics plugin using TRAC-IK
|
|
| 1 | 2024-10-08 | trac_ik_examples |
This package contains the source code for testing and comparing trac_ik
This package contains the source code for testing and comparing trac_ik
|
|
| 1 | 2024-10-08 | trac_ik |
The ROS packages in this repository were created to provide an improved
alternative Inverse Kinematics solver to the popular inverse Jacobian
methods in KDL. TRAC-IK handles joint-limited chains better than KDL
without increasing solve time.
The ROS packages in this repository were created to provide an improved
alternative Inverse Kinematics solver to the popular inverse Jacobian
methods in KDL. TRAC-IK handles joint-limited chains better than KDL
without increasing solve time.
|
|
| 1 | 2024-10-08 | industrial_ci |
This package contains CI (Continuous Integration) configuration that any ROS-powered packages can commonly use. Some notable feature:
This package contains CI (Continuous Integration) configuration that any ROS-powered packages can commonly use. Some notable feature:
|
|
| 1 | 2024-09-20 | costmap_converter |
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_support |
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_pg70_support |
PRBT support for Schunk pg70 gripper.
PRBT support for Schunk pg70 gripper.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_moveit_config |
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_ikfast_manipulator_plugin |
The prbt_ikfast_manipulator_plugin package
The prbt_ikfast_manipulator_plugin package
|
|
| 1 | 2024-08-29 | moveit_resources_pr2_description |
PR2 Resources used for MoveIt! testing
PR2 Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_panda_moveit_config |
|
|
| 1 | 2024-08-29 | moveit_resources_panda_description |
panda Resources used for MoveIt! testing
panda Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_fanuc_moveit_config |
|
|
| 1 | 2024-08-29 | moveit_resources_fanuc_description |
Fanuc Resources used for MoveIt! testing
Fanuc Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_dual_panda_moveit_config |
An automatically generated package with all the configuration and launch files for using the panda with the MoveIt Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the panda with the MoveIt Motion Planning Framework
|
|
| 1 | 2024-08-29 | moveit_resources |
Resources used for MoveIt! testing
Resources used for MoveIt! testing
|
|
| 1 | 2024-07-10 | zdepth_image_transport |
The zdepth_image_transport package
The zdepth_image_transport package
|
|
| 1 | 2024-07-10 | zdepth |
The zdepth package
The zdepth package
|
|
| 1 | 2024-07-10 | webrtcvad_ros |
This package provides a wrapper node for webrtcvad. It subscribes an audio topic and publish a flag if curretly speeched or not with VAD.
This package provides a wrapper node for webrtcvad. It subscribes an audio topic and publish a flag if curretly speeched or not with VAD.
|
|
| 1 | 2024-07-10 | voice_text |
voice_text (www.voicetext.jp)
voice_text (www.voicetext.jp)
|
|
| 1 | 2024-07-10 | switchbot_ros |
use switchbot with ros
use switchbot with ros
|
|
| 1 | 2024-07-10 | slic |
SLIC-Superpizel ROS Wrapper
This file contains the class elements of the class Slic. This class is an
implementation of the SLIC Superpixel algorithm by Achanta et al. [PAMI'12,
vol. 34, num. 11, pp. 2274-2282].
This implementation is created for the specific purpose of creating
over-segmentations in an OpenCV-based environment.
SLIC-Superpizel ROS Wrapper
This file contains the class elements of the class Slic. This class is an
implementation of the SLIC Superpixel algorithm by Achanta et al. [PAMI'12,
vol. 34, num. 11, pp. 2274-2282].
This implementation is created for the specific purpose of creating
over-segmentations in an OpenCV-based environment.
|
|
| 1 | 2024-07-10 | sesame_ros |
ROS API for Sesame smart lock
ROS API for Sesame smart lock
|
|
| 1 | 2024-07-10 | rostwitter |
The rostwitter package
The rostwitter package
|
|
| 1 | 2024-07-10 | rosping |
rosping is the tool to send ICMP ECHO_REQUEST to network hosts where roscore is running, and send back to you as rostopic message.
rosping is the tool to send ICMP ECHO_REQUEST to network hosts where roscore is running, and send back to you as rostopic message.
|
|
| 1 | 2024-07-10 | rospatlite |
rospatlite
rospatlite
|
|
| 1 | 2024-07-10 | ros_speech_recognition |
ROS wrapper for Python SpeechRecognition library
ROS wrapper for Python SpeechRecognition library
|
|
| 1 | 2024-07-10 | ros_google_cloud_language |
ros clinet library for google cloud language
ros clinet library for google cloud language
|
|
| 2 | 2024-07-10 | respeaker_ros |
The respeaker_ros package
The respeaker_ros package
|
|
| 1 | 2024-07-10 | pgm_learner |
Parameter/Structure Estimation and Inference for Bayesian Belief Network
Parameter/Structure Estimation and Inference for Bayesian Belief Network
|
|
| 1 | 2024-07-10 | osqp |
ROS wrapper for OSQP
ROS wrapper for OSQP
|
|
| 1 | 2024-07-10 | opt_camera |
opt_camera
opt_camera
|
|
| 1 | 2024-07-10 | nlopt |
nlopt
nlopt
|
|
| 1 | 2024-07-10 | nfc_ros |
The nfc_ros package
The nfc_ros package
|
|
| 1 | 2024-07-10 | mini_maxwell |
mini_maxwell
mini_maxwell
|
|
| 1 | 2024-07-10 | lpg_planner |
lpg_planner: LPGL Planner (http://zeus.ing.unibs.it/lpg/)
lpg_planner: LPGL Planner (http://zeus.ing.unibs.it/lpg/)
|
|
| 1 | 2024-07-10 | libsiftfast |
Library to compute SIFT features
Library to compute SIFT features
|
|
| 1 | 2024-07-10 | libcmt |
libCMT ROS Wrapper
libCMT ROS Wrapper
|
|
| 1 | 2024-07-10 | laser_filters_jsk_patch |
laser_filters_jsk_patch
laser_filters_jsk_patch
|
|
| 1 | 2024-07-10 | julius_ros |
The julius_ros package
The julius_ros package
|
|
| 1 | 2024-07-10 | julius |
julius: Open-Source Large Vocabulary CSR Engine (http://julius.sourceforge.jp/index.php)
julius: Open-Source Large Vocabulary CSR Engine (http://julius.sourceforge.jp/index.php)
|
|
| 1 | 2024-07-10 | jsk_3rdparty |
|
|
| 1 | 2024-07-10 | influxdb_store |
The influxdb_store package
The influxdb_store package
|
|
| 1 | 2024-07-10 | google_cloud_texttospeech |
The google_cloud_texttospeech package
The google_cloud_texttospeech package
|
|
| 1 | 2024-07-10 | google_chat_ros |
Use Google Chat API clients via ROS
Use Google Chat API clients via ROS
|
|
| 1 | 2024-07-10 | gdrive_ros |
Google drive upload and download package
Google drive upload and download package
|
|
| 1 | 2024-07-10 | ffha |
ffha: PDDL Planner (http://ipc.informatik.uni-freiburg.de)
ffha: PDDL Planner (http://ipc.informatik.uni-freiburg.de)
|
|
| 1 | 2024-07-10 | ff |
ff: pddl planner. see http://www.loria.fr/~hoffmanj/ff.html
ff: pddl planner. see http://www.loria.fr/~hoffmanj/ff.html
|
|
| 1 | 2024-07-10 | downward |
fast downward: PDDL Planner (http://www.fast-downward.org)
fast downward: PDDL Planner (http://www.fast-downward.org)
|
|
| 1 | 2024-07-10 | dialogflow_task_executive |
A ROS package for Google Dialogflow and launching apps via Dialogflow
A ROS package for Google Dialogflow and launching apps via Dialogflow
|
|
| 1 | 2024-07-10 | collada_urdf_jsk_patch |
unaccepted patch for collada_urdf
unaccepted patch for collada_urdf
|
|
| 1 | 2024-07-10 | chaplus_ros |
The ROS package for chaplus service
The ROS package for chaplus service
|
|
| 1 | 2024-07-10 | bayesian_belief_networks |
The bayesian_belief_networks package form https://github.com/eBay/bayesian-belief-networks, Authored by Neville Newey, Anzar Afaq, Copyright 2013 eBay Software Foundation
The bayesian_belief_networks package form https://github.com/eBay/bayesian-belief-networks, Authored by Neville Newey, Anzar Afaq, Copyright 2013 eBay Software Foundation
|
|
| 1 | 2024-07-10 | assimp_devel |
assimp library
assimp library
|
|
| 1 | 2024-07-10 | aques_talk |
ROS interface aques_talk demo program
ROS interface aques_talk demo program
|
|
| 1 | 2024-06-23 | ecl_utilities |
Includes various supporting tools and utilities for c++ programming.
Includes various supporting tools and utilities for c++ programming.
|
|
| 1 | 2024-06-23 | ecl_type_traits |
Extends c++ type traits and implements a few more to boot.
Extends c++ type traits and implements a few more to boot.
|
|
| 1 | 2024-06-23 | ecl_time |
Timing utilities are very dependent on the system api provided for their use.
This package provides a means for handling different timing models. Current support
- posix rt : complete.
- macosx : posix timers only, missing absolute timers.
- win : none.
Timing utilities are very dependent on the system api provided for their use.
This package provides a means for handling different timing models. Current support
- posix rt : complete.
- macosx : posix timers only, missing absolute timers.
- win : none.
|
|
| 1 | 2024-06-23 | ecl_threads |
This package provides the c++ extensions for a variety of threaded
programming tools. These are usually different on different
platforms, so the architecture for a cross-platform framework
is also implemented.
This package provides the c++ extensions for a variety of threaded
programming tools. These are usually different on different
platforms, so the architecture for a cross-platform framework
is also implemented.
|
|
| 1 | 2024-06-23 | ecl_streams |
These are lightweight text streaming classes that connect to standardised
ecl type devices.
These are lightweight text streaming classes that connect to standardised
ecl type devices.
|
|
| 1 | 2024-06-23 | ecl_statistics |
Common statistical structures and algorithms for control systems.
Common statistical structures and algorithms for control systems.
|
|
| 1 | 2024-06-23 | ecl_sigslots |
Provides a signal/slot mechanism (in the same vein as qt sigslots,
boost::signals etc for intra-process communication. These include
some improvements - they do not need a preprocessor, are fully type safe,
allow for simple connections via a posix style string identifier
and are multithread-safe.
Provides a signal/slot mechanism (in the same vein as qt sigslots,
boost::signals etc for intra-process communication. These include
some improvements - they do not need a preprocessor, are fully type safe,
allow for simple connections via a posix style string identifier
and are multithread-safe.
|
|
| 1 | 2024-06-23 | ecl_mpl |
Metaprogramming tools move alot of runtime calculations to be shifted to
compile time. This has only very elementary structures at this stage.
Metaprogramming tools move alot of runtime calculations to be shifted to
compile time. This has only very elementary structures at this stage.
|
|
| 1 | 2024-06-23 | ecl_math |
This package provides simple support to cmath, filling in holes
or redefining in a c++ formulation where desirable.
This package provides simple support to cmath, filling in holes
or redefining in a c++ formulation where desirable.
|
|
| 1 | 2024-06-23 | ecl_linear_algebra |
Ecl frontend to a linear matrix package (currently eigen).
Ecl frontend to a linear matrix package (currently eigen).
|
|
| 1 | 2024-06-23 | ecl_ipc |
Interprocess mechanisms vary greatly across platforms - sysv, posix, win32, there
are more than a few. This package provides an infrastructure to allow for developing
cross platform c++ wrappers around the lower level c api's that handle these
mechanisms. These make it not only easier to utilise such mechanisms, but allow it
to be done consistently across platforms.
Interprocess mechanisms vary greatly across platforms - sysv, posix, win32, there
are more than a few. This package provides an infrastructure to allow for developing
cross platform c++ wrappers around the lower level c api's that handle these
mechanisms. These make it not only easier to utilise such mechanisms, but allow it
to be done consistently across platforms.
|
|
| 1 | 2024-06-23 | ecl_geometry |
Any tools relating to mathematical geometry.
Primarily featuring polynomials and interpolations.
Any tools relating to mathematical geometry.
Primarily featuring polynomials and interpolations.
|
|
| 1 | 2024-06-23 | ecl_formatters |
The formatters here simply format various input types to a specified
text format. They can be used with most streaming types (including both
ecl and stl streams).
The formatters here simply format various input types to a specified
text format. They can be used with most streaming types (including both
ecl and stl streams).
|
|
| 1 | 2024-06-23 | ecl_filesystem |
Cross platform filesystem utilities (until c++11 makes its way in).
Cross platform filesystem utilities (until c++11 makes its way in).
|
|
| 1 | 2024-06-23 | ecl_exceptions |
Template based exceptions - these are simple and practical
and avoid the proliferation of exception types. Although not
syntatactically ideal, it is convenient and eminently practical.
Template based exceptions - these are simple and practical
and avoid the proliferation of exception types. Although not
syntatactically ideal, it is convenient and eminently practical.
|
|
| 1 | 2024-06-23 | ecl_eigen |
This provides an Eigen implementation for ecl's linear algebra.
This provides an Eigen implementation for ecl's linear algebra.
|
|
| 1 | 2024-06-23 | ecl_devices |
Provides an extensible and standardised framework for input-output devices.
Provides an extensible and standardised framework for input-output devices.
|
|
| 1 | 2024-06-23 | ecl_core_apps |
This includes a suite of programs demo'ing various aspects of the
ecl_core. It also includes various benchmarking and utility programs for
use primarily with embedded systems.
This includes a suite of programs demo'ing various aspects of the
ecl_core. It also includes various benchmarking and utility programs for
use primarily with embedded systems.
|
|
| 1 | 2024-06-23 | ecl_core |
A set of tools and interfaces extending the capabilities of c++ to
provide a lightweight, consistent interface with a focus for control
programming.
A set of tools and interfaces extending the capabilities of c++ to
provide a lightweight, consistent interface with a focus for control
programming.
|
|
| 1 | 2024-06-23 | ecl_converters |
Some fast/convenient type converters, mostly for char strings or strings.
These are not really fully fleshed out, alot of them could use the addition for
the whole range of fundamental types (e.g. all integers, not just int, unsigned int).
They will come as the need arises.
Some fast/convenient type converters, mostly for char strings or strings.
These are not really fully fleshed out, alot of them could use the addition for
the whole range of fundamental types (e.g. all integers, not just int, unsigned int).
They will come as the need arises.
|
|
| 1 | 2024-06-23 | ecl_containers |
The containers included here are intended to extend the stl containers.
In all cases, these implementations are designed to implement
c++ conveniences and safety where speed is not sacrificed.
Also includes techniques for memory debugging of common problems such
as buffer overruns.
The containers included here are intended to extend the stl containers.
In all cases, these implementations are designed to implement
c++ conveniences and safety where speed is not sacrificed.
Also includes techniques for memory debugging of common problems such
as buffer overruns.
|
|
| 1 | 2024-06-23 | ecl_concepts |
Introduces a compile time concept checking mechanism that can be used
most commonly to check for required functionality when passing
template arguments.
Introduces a compile time concept checking mechanism that can be used
most commonly to check for required functionality when passing
template arguments.
|
|
| 1 | 2024-06-23 | ecl_command_line |
Embeds the TCLAP library inside the ecl. This is a very convenient
command line parser in templatised c++.
Embeds the TCLAP library inside the ecl. This is a very convenient
command line parser in templatised c++.
|
|
| 1 | 2024-06-17 | marti_visualization_msgs |
marti_visualization_msgs
marti_visualization_msgs
|
|
| 1 | 2024-06-17 | marti_status_msgs |
marti_status_msgs
marti_status_msgs
|
|
| 1 | 2024-06-17 | marti_sensor_msgs |
marti_sensor_msgs
marti_sensor_msgs
|
|
| 1 | 2024-06-17 | marti_perception_msgs |
marti_perception_msgs
marti_perception_msgs
|
|
| 1 | 2024-06-17 | marti_nav_msgs |
marti_nav_msgs
marti_nav_msgs
|
|
| 1 | 2024-06-17 | marti_introspection_msgs |
marti_introspection_msgs
marti_introspection_msgs
|
|
| 1 | 2024-06-17 | marti_dbw_msgs |
marti_dbw_msgs
marti_dbw_msgs
|
|
| 1 | 2024-06-17 | marti_common_msgs |
marti_common_msgs
marti_common_msgs
|
|
| 1 | 2024-06-17 | marti_can_msgs |
marti_can_msgs
marti_can_msgs
|
|
| 1 | 2024-06-03 | swri_yaml_util |
Provides wrappers around the yaml-cpp library for various utility functions
and to abstract out the API changes made to yaml-cpp between ubuntu:precise
and ubuntu:trusty.
Provides wrappers around the yaml-cpp library for various utility functions
and to abstract out the API changes made to yaml-cpp between ubuntu:precise
and ubuntu:trusty.
|
|
| 1 | 2024-06-03 | swri_transform_util |
The swri_transform_util package contains utility functions and classes for
transforming between coordinate frames.
The swri_transform_util package contains utility functions and classes for
transforming between coordinate frames.
|
|
| 1 | 2024-06-03 | swri_system_util |
swri_system_util
swri_system_util
|
|
| 1 | 2024-06-03 | swri_string_util |
swri_string_util
swri_string_util
|
|
| 1 | 2024-06-03 | swri_serial_util |
swri_serial_util
swri_serial_util
|
|
| 1 | 2024-06-03 | swri_route_util |
This library provides functionality to simplify working with the
navigation messages defined in marti_nav_msgs.
This library provides functionality to simplify working with the
navigation messages defined in marti_nav_msgs.
|
|
| 1 | 2024-06-03 | swri_rospy |
This package provides added functionality on top of rospy, including a
single-threaded callback queue.
This package provides added functionality on top of rospy, including a
single-threaded callback queue.
|
|
| 1 | 2024-06-03 | swri_roscpp |
Enhancements to roscpp functionality to reduce boilerplate code and implement common patterns.
Enhancements to roscpp functionality to reduce boilerplate code and implement common patterns.
|
|
| 1 | 2024-06-03 | swri_prefix_tools |
Contains scripts that are useful as prefix commands for nodes
started by roslaunch.
Contains scripts that are useful as prefix commands for nodes
started by roslaunch.
|
|
| 1 | 2024-06-03 | swri_opencv_util |
swri_opencv_util
swri_opencv_util
|
|
| 1 | 2024-06-03 | swri_nodelet |
This package provides a simple script to write simple launch files
that can easily switch between running nodelets together or as
standalone nodes.
This package provides a simple script to write simple launch files
that can easily switch between running nodelets together or as
standalone nodes.
|
|
| 1 | 2024-06-03 | swri_math_util |
swri_math_util
swri_math_util
|
|
| 1 | 2024-06-03 | swri_image_util |
swri_image_util
swri_image_util
|
|
| 1 | 2024-06-03 | swri_geometry_util |
swri_geometry_util
swri_geometry_util
|
|
| 1 | 2024-06-03 | swri_dbw_interface |
This package provides documentation on common interface conventions for
drive-by-wire systems.
This package provides documentation on common interface conventions for
drive-by-wire systems.
|
|
| 1 | 2024-06-03 | swri_console_util |
swri_console_util
swri_console_util
|
|
| 1 | 2024-06-03 | swri_cli_tools |
rosman contains the rosman tool for introspecting ROS nodes
rosman contains the rosman tool for introspecting ROS nodes
|
|
| 1 | 2024-06-03 | marti_data_structures |
marti_data_structures
marti_data_structures
|
|
| 2 | 2024-05-15 | gpsd_client |
connects to a GPSd server and broadcasts GPS fixes
using the NavSatFix message
connects to a GPSd server and broadcasts GPS fixes
using the NavSatFix message
|
|
| 2 | 2024-05-15 | gps_umd |
gps_umd metapackage
gps_umd metapackage
|
|
| 2 | 2024-05-15 | gps_common |
GPS messages and common routines for use in GPS drivers
GPS messages and common routines for use in GPS drivers
|
|
| 1 | 2024-05-02 | tblib |
Traceback fiddling library. Allows you to pickle tracebacks.
Traceback fiddling library. Allows you to pickle tracebacks.
|
|
| 3 | 2024-04-26 | rospy_message_converter |
Converts between Python dictionaries and JSON to rospy messages.
Converts between Python dictionaries and JSON to rospy messages.
|
|
| 1 | 2024-04-16 | rqt_shell |
rqt_shell is a Python GUI plugin providing an interactive shell.
rqt_shell is a Python GUI plugin providing an interactive shell.
|
|
| 1 | 2024-04-16 | rosdoc_lite |
This ROS package wraps documentation tools like doxygen, sphinx,
and epydoc, making it convenient to generate ROS package
documentation.
It also generates online documentation for the ROS wiki.
This ROS package wraps documentation tools like doxygen, sphinx,
and epydoc, making it convenient to generate ROS package
documentation.
It also generates online documentation for the ROS wiki.
|
|
| 2 | 2024-04-10 | usb_cam |
A ROS Driver for V4L USB Cameras
A ROS Driver for V4L USB Cameras
|
|
| 2 | 2024-04-01 | octovis |
octovis is visualization tool for the OctoMap library based on Qt and libQGLViewer. See
http://octomap.github.io for details.
octovis is visualization tool for the OctoMap library based on Qt and libQGLViewer. See
http://octomap.github.io for details.
|
|
| 2 | 2024-04-01 | octomap |
The OctoMap library implements a 3D occupancy grid mapping approach, providing data structures and mapping algorithms in C++. The map implementation is based on an octree. See
http://octomap.github.io for details.
The OctoMap library implements a 3D occupancy grid mapping approach, providing data structures and mapping algorithms in C++. The map implementation is based on an octree. See
http://octomap.github.io for details.
|
|
| 2 | 2024-04-01 | dynamic_edt_3d |
The dynamicEDT3D library implements an inrementally updatable Euclidean distance transform (EDT) in 3D. It comes with a wrapper to use the OctoMap 3D representation and hooks into the change detection of the OctoMap library to propagate changes to the EDT.
The dynamicEDT3D library implements an inrementally updatable Euclidean distance transform (EDT) in 3D. It comes with a wrapper to use the OctoMap 3D representation and hooks into the change detection of the OctoMap library to propagate changes to the EDT.
|
|
| 1 | 2024-03-30 | msp |
Implementation of the MultiWii Serial Protocol (MSP)
Implementation of the MultiWii Serial Protocol (MSP)
|
|
| 1 | 2024-02-22 | netft_utils |
C++ class and ROS node for ATI force/torque sensors connected to a Netbox. Includes gravity compensation and transformations.
C++ class and ROS node for ATI force/torque sensors connected to a Netbox. Includes gravity compensation and transformations.
|
|
| 2 | 2024-01-29 | naoqi_driver |
Driver module between Aldebaran's NAOqiOS and ROS. It publishes all sensor and actuator data as well as basic diagnostic for battery, temperature. It subscribes also to RVIZ simple goal and cmd_vel for teleop.
Driver module between Aldebaran's NAOqiOS and ROS. It publishes all sensor and actuator data as well as basic diagnostic for battery, temperature. It subscribes also to RVIZ simple goal and cmd_vel for teleop.
|
|
| 1 | 2024-01-22 | jsk_teleop_joy |
jsk_teleop_joy
jsk_teleop_joy
|
|
| 1 | 2024-01-22 | jsk_ik_server |
jsk_ik_server
jsk_ik_server
|
|
| 1 | 2024-01-22 | jsk_footstep_planner |
jsk_footstep_planner
jsk_footstep_planner
|
|
| 1 | 2024-01-22 | jsk_footstep_controller |
The jsk_footstep_controller package
The jsk_footstep_controller package
|
|
| 1 | 2024-01-22 | jsk_control |
The jsk_control package
The jsk_control package
|
|
| 1 | 2024-01-22 | jsk_calibration |
The jsk_calibration package
The jsk_calibration package
|
|
| 1 | 2024-01-22 | joy_mouse |
The joy_mouse package
The joy_mouse package
|
|
| 1 | 2024-01-22 | eus_teleop |
The eus_teleop package
The eus_teleop package
|
|
| 1 | 2024-01-22 | eus_qpoases |
eus_qpoases
eus_qpoases
|
|
| 1 | 2024-01-22 | eus_qp |
eus_qp is an interface of euslisp to solve qp problems with linear constraints.
eus_qp is an interface of euslisp to solve qp problems with linear constraints.
|
|
| 1 | 2024-01-22 | eus_nlopt |
eus_nlopt
eus_nlopt
|
|
| 1 | 2024-01-22 | contact_states_observer |
The contact_states_observer package
The contact_states_observer package
|
|
| 1 | 2024-01-22 | cmd_vel_smoother |
The cmd_vel_smoother package
The cmd_vel_smoother package
|
|
| 1 | 2023-12-04 | fcl |
FCL is a collision checking library
FCL is a collision checking library
|
|
| 3 | 2023-11-17 | grid_map_visualization |
Configurable tool to visualize grid maps in RViz.
Configurable tool to visualize grid maps in RViz.
|
|
| 3 | 2023-11-17 | grid_map_sdf |
Generates signed distance fields from grid maps.
Generates signed distance fields from grid maps.
|
|
| 3 | 2023-11-17 | grid_map_rviz_plugin |
RViz plugin for displaying grid map messages.
RViz plugin for displaying grid map messages.
|
|
| 3 | 2023-11-17 | grid_map_ros |
ROS interface for the grid map library to manage two-dimensional grid maps with multiple data layers.
ROS interface for the grid map library to manage two-dimensional grid maps with multiple data layers.
|
|
| 3 | 2023-11-17 | grid_map_pcl |
Conversions between grid maps and Point Cloud Library (PCL) types.
Conversions between grid maps and Point Cloud Library (PCL) types.
|
|
| 3 | 2023-11-17 | grid_map_octomap |
Conversions between grid maps and OctoMap types.
Conversions between grid maps and OctoMap types.
|
|
| 3 | 2023-11-17 | grid_map_msgs |
Definition of the multi-layered grid map message type.
Definition of the multi-layered grid map message type.
|
|
| 3 | 2023-11-17 | grid_map_loader |
Loading and publishing grid maps from bag files.
Loading and publishing grid maps from bag files.
|
|
| 3 | 2023-11-17 | grid_map_filters |
Processing grid maps as a sequence of ROS filters.
Processing grid maps as a sequence of ROS filters.
|
|
| 3 | 2023-11-17 | grid_map_demos |
Demo nodes to demonstrate the usage of the grid map library.
Demo nodes to demonstrate the usage of the grid map library.
|
|
| 3 | 2023-11-17 | grid_map_cv |
Conversions between grid maps and OpenCV images.
Conversions between grid maps and OpenCV images.
|
|
| 3 | 2023-11-17 | grid_map_costmap_2d |
Interface for grid maps to the costmap_2d format.
Interface for grid maps to the costmap_2d format.
|
|
| 3 | 2023-11-17 | grid_map_core |
Universal grid map library to manage two-dimensional grid maps with multiple data layers.
Universal grid map library to manage two-dimensional grid maps with multiple data layers.
|
|
| 3 | 2023-11-17 | grid_map |
Meta-package for the universal grid map library.
Meta-package for the universal grid map library.
|
|
| 1 | 2023-11-15 | nao_gazebo_plugin |
The nao_gazebo_plugin package
The nao_gazebo_plugin package
|
|
| 1 | 2023-11-15 | nao_control |
The nao_control package
The nao_control package
|
|
| 1 | 2023-11-03 | ros_numpy |
A collection of conversion function for extracting numpy arrays from messages
A collection of conversion function for extracting numpy arrays from messages
|
|
| 1 | 2023-10-19 | hector_nist_arena_worlds |
hector_nist_arena_worlds by default contains NIST standard test arena scenarios created using the hector_nist_arena_designer GUI.
hector_nist_arena_worlds by default contains NIST standard test arena scenarios created using the hector_nist_arena_designer GUI.
|
|
| 1 | 2023-10-19 | hector_nist_arena_elements |
hector_nist_arena_elements contains models of elements/parts used in NIST standard test arenas for response robots. Using these elements, scenarios can be generated for simulation using gazebo.
hector_nist_arena_elements contains models of elements/parts used in NIST standard test arenas for response robots. Using these elements, scenarios can be generated for simulation using gazebo.
|
|
| 1 | 2023-10-19 | hector_nist_arena_designer |
hector_nist_arena_designer is a simple GUI for the fast and easy creation of test scenarios involving NIST standard test methods for response robots.
hector_nist_arena_designer is a simple GUI for the fast and easy creation of test scenarios involving NIST standard test methods for response robots.
|
|
| 1 | 2023-10-13 | pepper_sensors_py |
The pepper_sensors package
The pepper_sensors package
|
|
| 1 | 2023-10-13 | pepper_robot |
The pepper_robot package
The pepper_robot package
|
|
| 1 | 2023-10-13 | pepper_description |
The pepper_description package
The pepper_description package
|
|
| 1 | 2023-10-13 | pepper_bringup |
The pepper_bringup package
The pepper_bringup package
|
|
| 1 | 2023-10-12 | rqt_console |
rqt_console provides a GUI plugin for displaying and filtering ROS messages.
rqt_console provides a GUI plugin for displaying and filtering ROS messages.
|
|
| 2 | 2023-10-04 | rqt_robot_steering |
rqt_robot_steering provides a GUI plugin for steering a robot using Twist messages.
rqt_robot_steering provides a GUI plugin for steering a robot using Twist messages.
|
|
| 1 | 2023-10-04 | rqt_publisher |
rqt_publisher provides a GUI plugin for publishing arbitrary messages with fixed or computed field values.
rqt_publisher provides a GUI plugin for publishing arbitrary messages with fixed or computed field values.
|
|
| 1 | 2023-10-04 | rqt_dep |
rqt_dep provides a GUI plugin for visualizing the ROS dependency graph.
rqt_dep provides a GUI plugin for visualizing the ROS dependency graph.
|
|
| 2 | 2023-10-02 | rqt_tf_tree |
rqt_tf_tree provides a GUI plugin for visualizing the ROS TF frame tree.
rqt_tf_tree provides a GUI plugin for visualizing the ROS TF frame tree.
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | mvsim |
A lightweight multivehicle simulation framework.
A lightweight multivehicle simulation framework.
|
|
| 1 | 2024-12-02 | webargs |
A friendly library for parsing HTTP request arguments, with built-in support for popular web frameworks, including Flask, Django, Bottle, Tornado, Pyramid, webapp2, Falcon, and aiohttp.
A friendly library for parsing HTTP request arguments, with built-in support for popular web frameworks, including Flask, Django, Bottle, Tornado, Pyramid, webapp2, Falcon, and aiohttp.
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 1 | 2024-11-28 | bta_tof_driver |
The BTA ROS driver
The BTA ROS driver
|
|
| 1 | 2024-11-25 | urg_stamped |
Precisely stamped URG driver for ROS
Precisely stamped URG driver for ROS
|
|
| 1 | 2024-11-25 | behaviortree_cpp |
This package provides the Behavior Trees core library.
This package provides the Behavior Trees core library.
|
|
| 1 | 2024-11-12 | virtual_force_publisher |
publish end effector's force, which is estmated from joint torque value
publish end effector's force, which is estmated from joint torque value
|
|
| 1 | 2024-11-12 | multi_map_server |
multi_map_server provides the
multi_map_server provides the
|
|
| 1 | 2024-11-12 | jsk_topic_tools |
jsk_topic_tools
jsk_topic_tools
|
|
| 1 | 2024-11-12 | jsk_tools |
Includes emacs scripts, ros tool alias generator, and launch doc generator.
Includes emacs scripts, ros tool alias generator, and launch doc generator.
|
|
| 1 | 2024-11-12 | jsk_tilt_laser |
The jsk_tilt_laser package
The jsk_tilt_laser package
|
|
| 1 | 2024-11-12 | jsk_rosbag_tools |
The rosbag tools
The rosbag tools
|
|
| 1 | 2024-11-12 | jsk_network_tools |
jsk_network_tools
jsk_network_tools
|
|
| 1 | 2024-11-12 | jsk_data |
The jsk_data package
The jsk_data package
|
|
| 1 | 2024-11-12 | jsk_common |
|
|
| 1 | 2024-11-12 | image_view2 |
A simple viewer for ROS image topics with draw-on features
A simple viewer for ROS image topics with draw-on features
|
|
| 1 | 2024-11-12 | dynamic_tf_publisher |
dynamically set the tf trensformation
dynamically set the tf trensformation
|
|
| 1 | 2024-11-12 | audio_video_recorder |
ROS package for recording image and audio synchronously
ROS package for recording image and audio synchronously
|
|
| 1 | 2024-10-29 | sound_classification |
The sound_classification package
The sound_classification package
|
|
| 1 | 2024-10-29 | resized_image_transport |
ROS nodes to publish resized images.
ROS nodes to publish resized images.
|
|
| 1 | 2024-10-29 | jsk_recognition_utils |
C++ library about sensor model, geometrical modeling and perception.
C++ library about sensor model, geometrical modeling and perception.
|
|
| 1 | 2024-10-29 | jsk_recognition_msgs |
ROS messages for jsk_pcl_ros and jsk_perception.
ROS messages for jsk_pcl_ros and jsk_perception.
|
|
| 1 | 2024-10-29 | jsk_recognition |
|
|
| 1 | 2024-10-29 | jsk_perception |
ROS nodes and nodelets for 2-D image perception.
ROS nodes and nodelets for 2-D image perception.
|
|
| 1 | 2024-10-29 | jsk_pcl_ros_utils |
ROS utility nodelets for pointcloud perception.
ROS utility nodelets for pointcloud perception.
|
|
| 1 | 2024-10-29 | jsk_pcl_ros |
ROS nodelets for pointcloud perception.
ROS nodelets for pointcloud perception.
|
|
| 1 | 2024-10-29 | imagesift |
For every image, computes its sift features and send a new message with the image, its intrinsic parameters, and the features.
Parameters include:
display - shows the image on the local computer
For every image, computes its sift features and send a new message with the image, its intrinsic parameters, and the features.
Parameters include:
display - shows the image on the local computer
|
|
| 1 | 2024-10-29 | checkerboard_detector |
Uses opencv to find checkboards and compute their 6D poses with respect to the image. Requires the image to be calibrated.
Uses opencv to find checkboards and compute their 6D poses with respect to the image. Requires the image to be calibrated.
|
|
| 1 | 2024-10-29 | audio_to_spectrogram |
Convert audio (audio_common_msgs/AudioData) to spectrogram (sensor_msgs/Image)
Convert audio (audio_common_msgs/AudioData) to spectrogram (sensor_msgs/Image)
|
|
| 1 | 2024-10-28 | python_orocos_kdl |
This package contains the python bindings PyKDL for the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains the python bindings PyKDL for the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 3 | 2024-10-28 | orocos_kdl |
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 1 | 2024-10-26 | pose_cov_ops |
C++ library for SE(2)/SE(3) pose composition operations with uncertainty
C++ library for SE(2)/SE(3) pose composition operations with uncertainty
|
|
| 2 | 2024-10-18 | variant_topic_tools |
Topic tools for treating messages as variant types.
Topic tools for treating messages as variant types.
|
|
| 2 | 2024-10-18 | variant_msgs |
Variant messages are designed to accommodate the information content of any invariant message. They are truly generic and can freely be converted to and from specific message objects.
Variant messages are designed to accommodate the information content of any invariant message. They are truly generic and can freely be converted to and from specific message objects.
|
|
| 2 | 2024-10-18 | variant |
Meta-package for the universal variant library.
Meta-package for the universal variant library.
|
|
| 3 | 2024-10-18 | grid_map_visualization |
Configurable tool to visualize grid maps in RViz.
Configurable tool to visualize grid maps in RViz.
|
|
| 3 | 2024-10-18 | grid_map_sdf |
Generates signed distance fields from grid maps.
Generates signed distance fields from grid maps.
|
|
| 3 | 2024-10-18 | grid_map_rviz_plugin |
RViz plugin for displaying grid map messages.
RViz plugin for displaying grid map messages.
|
|
| 3 | 2024-10-18 | grid_map_ros |
ROS interface for the grid map library to manage two-dimensional grid maps with multiple data layers.
ROS interface for the grid map library to manage two-dimensional grid maps with multiple data layers.
|
|
| 3 | 2024-10-18 | grid_map_pcl |
Conversions between grid maps and Point Cloud Library (PCL) types.
Conversions between grid maps and Point Cloud Library (PCL) types.
|
|
| 3 | 2024-10-18 | grid_map_octomap |
Conversions between grid maps and OctoMap types.
Conversions between grid maps and OctoMap types.
|
|
| 3 | 2024-10-18 | grid_map_msgs |
Definition of the multi-layered grid map message type.
Definition of the multi-layered grid map message type.
|
|
| 3 | 2024-10-18 | grid_map_loader |
Loading and publishing grid maps from bag files.
Loading and publishing grid maps from bag files.
|
|
| 3 | 2024-10-18 | grid_map_filters |
Processing grid maps as a sequence of ROS filters.
Processing grid maps as a sequence of ROS filters.
|
|
| 3 | 2024-10-18 | grid_map_demos |
Demo nodes to demonstrate the usage of the grid map library.
Demo nodes to demonstrate the usage of the grid map library.
|
|
| 3 | 2024-10-18 | grid_map_cv |
Conversions between grid maps and OpenCV images.
Conversions between grid maps and OpenCV images.
|
|
| 3 | 2024-10-18 | grid_map_costmap_2d |
Interface for grid maps to the costmap_2d format.
Interface for grid maps to the costmap_2d format.
|
|
| 3 | 2024-10-18 | grid_map_core |
Universal grid map library to manage two-dimensional grid maps with multiple data layers.
Universal grid map library to manage two-dimensional grid maps with multiple data layers.
|
|
| 3 | 2024-10-18 | grid_map |
Meta-package for the universal grid map library.
Meta-package for the universal grid map library.
|
|
| 1 | 2024-10-13 | random_numbers |
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
|
|
| 1 | 2024-10-13 | agni_tf_tools |
This package provides a gui program as well as a rviz plugin to publish static transforms.
Both support the transformation between various Euler angle representations.
The rviz plugin also allows to configure the transform with an interactive marker.
This package provides a gui program as well as a rviz plugin to publish static transforms.
Both support the transformation between various Euler angle representations.
The rviz plugin also allows to configure the transform with an interactive marker.
|
|
| 2 | 2024-10-10 | robot_self_filter |
Filters the robot's body out of point clouds.
Filters the robot's body out of point clouds.
|
|
| 1 | 2024-10-08 | trac_ik_python |
The trac_ik_python package contains a python wrapper using SWIG
for trac_ik_lib
The trac_ik_python package contains a python wrapper using SWIG
for trac_ik_lib
|
|
| 1 | 2024-10-08 | trac_ik_lib |
TRAC-IK is a faster, significantly more reliable drop-in replacement for
KDL's pseudoinverse Jacobian solver.
The TRAC-IK library has a very similar API to KDL's IK solver calls,
except that the user passes a maximum time instead of a maximum number of
search iterations. Additionally, TRAC-IK allows for error tolerances to
be set independently for each Cartesian dimension (x,y,z,roll,pitch.yaw).
TRAC-IK is a faster, significantly more reliable drop-in replacement for
KDL's pseudoinverse Jacobian solver.
The TRAC-IK library has a very similar API to KDL's IK solver calls,
except that the user passes a maximum time instead of a maximum number of
search iterations. Additionally, TRAC-IK allows for error tolerances to
be set independently for each Cartesian dimension (x,y,z,roll,pitch.yaw).
|
|
| 1 | 2024-10-08 | trac_ik_kinematics_plugin |
A MoveIt! Kinematics plugin using TRAC-IK
A MoveIt! Kinematics plugin using TRAC-IK
|
|
| 1 | 2024-10-08 | trac_ik_examples |
This package contains the source code for testing and comparing trac_ik
This package contains the source code for testing and comparing trac_ik
|
|
| 1 | 2024-10-08 | trac_ik |
The ROS packages in this repository were created to provide an improved
alternative Inverse Kinematics solver to the popular inverse Jacobian
methods in KDL. TRAC-IK handles joint-limited chains better than KDL
without increasing solve time.
The ROS packages in this repository were created to provide an improved
alternative Inverse Kinematics solver to the popular inverse Jacobian
methods in KDL. TRAC-IK handles joint-limited chains better than KDL
without increasing solve time.
|
|
| 1 | 2024-10-08 | industrial_ci |
This package contains CI (Continuous Integration) configuration that any ROS-powered packages can commonly use. Some notable feature:
This package contains CI (Continuous Integration) configuration that any ROS-powered packages can commonly use. Some notable feature:
|
|
| 1 | 2024-10-08 | gepetto-viewer |
An user-friendly Graphical Interface
An user-friendly Graphical Interface
|
|
| 1 | 2024-09-20 | costmap_converter |
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
|
|
| 2 | 2024-09-14 | libpointmatcher |
libpointmatcher is a modular ICP library, useful for robotics and computer vision.
libpointmatcher is a modular ICP library, useful for robotics and computer vision.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_support |
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_pg70_support |
PRBT support for Schunk pg70 gripper.
PRBT support for Schunk pg70 gripper.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_moveit_config |
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_ikfast_manipulator_plugin |
The prbt_ikfast_manipulator_plugin package
The prbt_ikfast_manipulator_plugin package
|
|
| 1 | 2024-08-29 | moveit_resources_pr2_description |
PR2 Resources used for MoveIt! testing
PR2 Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_panda_moveit_config |
|
|
| 1 | 2024-08-29 | moveit_resources_panda_description |
panda Resources used for MoveIt! testing
panda Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_fanuc_moveit_config |
|
|
| 1 | 2024-08-29 | moveit_resources_fanuc_description |
Fanuc Resources used for MoveIt! testing
Fanuc Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_dual_panda_moveit_config |
An automatically generated package with all the configuration and launch files for using the panda with the MoveIt Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the panda with the MoveIt Motion Planning Framework
|
|
| 1 | 2024-08-29 | moveit_resources |
Resources used for MoveIt! testing
Resources used for MoveIt! testing
|
|
| 1 | 2024-08-06 | pr2_gripper_sensor_msgs |
The pr2_gripper_sensor_msgs package contains various actions and messages that are used in the pr2_gripper_sensor* packages. The structure of the API used by pr2_gripper_sensor_action, and pr2_gripper_sensor_controller packages is as follows:
Users will send a goal to an Action in the message format of PR2Gripper*Command (where * replaces the name of the particular Action from pr2_gripper_sensor_action). Feedback and Result information for the action is then returned in the format of PR2Gripper*Data.
The pr2_gripper_sensor_msgs package contains various actions and messages that are used in the pr2_gripper_sensor* packages. The structure of the API used by pr2_gripper_sensor_action, and pr2_gripper_sensor_controller packages is as follows:
Users will send a goal to an Action in the message format of PR2Gripper*Command (where * replaces the name of the particular Action from pr2_gripper_sensor_action). Feedback and Result information for the action is then returned in the format of PR2Gripper*Data.
|
|
| 1 | 2024-08-06 | pr2_gripper_sensor_controller |
The pr2_gripper_sensor_controller package is a real-time controller that integrates signals from the PR2 hand-mounted accelerometer and finger-mounted pressure sensors with motor control of the gripper joint to do highly responsive sensing and low-latency closed-loop control.
The pr2_gripper_sensor_controller package is a real-time controller that integrates signals from the PR2 hand-mounted accelerometer and finger-mounted pressure sensors with motor control of the gripper joint to do highly responsive sensing and low-latency closed-loop control.
|
|
| 1 | 2024-08-06 | pr2_gripper_sensor_action |
The pr2_gripper_sensor_action package provides an action interface for talking to the pr2_gripper_sensor_controller real-time controller.
It provides several different actions for getting high-level sensor information from the PR2 palm-mounted accelerometers, fingertip pressure arrays, and gripper motor/encoder, as well as several sensor-based gripper control actions that respond with low-latency in real-time.
The pr2_gripper_sensor_action package provides an action interface for talking to the pr2_gripper_sensor_controller real-time controller.
It provides several different actions for getting high-level sensor information from the PR2 palm-mounted accelerometers, fingertip pressure arrays, and gripper motor/encoder, as well as several sensor-based gripper control actions that respond with low-latency in real-time.
|
|
| 1 | 2024-08-06 | pr2_gripper_sensor |
The pr2_gripper_sensor package
The pr2_gripper_sensor package
|
|
| 1 | 2024-07-17 | urdf_mesh_converter |
Convert urdf mesh.
Convert urdf mesh.
|
|
| 1 | 2024-07-17 | jsk_model_tools |
|
|
| 1 | 2024-07-17 | eusurdf |
urdf models converted from euslisp
urdf models converted from euslisp
|
|
| 1 | 2024-07-17 | euslisp_model_conversion_tester |
euslisp_model_conversion_tester
euslisp_model_conversion_tester
|
|
| 1 | 2024-07-17 | euscollada |
euscollada
euscollada
|
|
| 1 | 2024-07-17 | eus_assimp |
eus_assimp
eus_assimp
|
|
| 1 | 2024-07-10 | zdepth_image_transport |
The zdepth_image_transport package
The zdepth_image_transport package
|
|
| 1 | 2024-07-10 | zdepth |
The zdepth package
The zdepth package
|
|
| 1 | 2024-07-10 | webrtcvad_ros |
This package provides a wrapper node for webrtcvad. It subscribes an audio topic and publish a flag if curretly speeched or not with VAD.
This package provides a wrapper node for webrtcvad. It subscribes an audio topic and publish a flag if curretly speeched or not with VAD.
|
|
| 1 | 2024-07-10 | voice_text |
voice_text (www.voicetext.jp)
voice_text (www.voicetext.jp)
|
|
| 1 | 2024-07-10 | switchbot_ros |
use switchbot with ros
use switchbot with ros
|
|
| 1 | 2024-07-10 | slic |
SLIC-Superpizel ROS Wrapper
This file contains the class elements of the class Slic. This class is an
implementation of the SLIC Superpixel algorithm by Achanta et al. [PAMI'12,
vol. 34, num. 11, pp. 2274-2282].
This implementation is created for the specific purpose of creating
over-segmentations in an OpenCV-based environment.
SLIC-Superpizel ROS Wrapper
This file contains the class elements of the class Slic. This class is an
implementation of the SLIC Superpixel algorithm by Achanta et al. [PAMI'12,
vol. 34, num. 11, pp. 2274-2282].
This implementation is created for the specific purpose of creating
over-segmentations in an OpenCV-based environment.
|
|
| 1 | 2024-07-10 | sesame_ros |
ROS API for Sesame smart lock
ROS API for Sesame smart lock
|
|
| 1 | 2024-07-10 | rostwitter |
The rostwitter package
The rostwitter package
|
|
| 1 | 2024-07-10 | rosping |
rosping is the tool to send ICMP ECHO_REQUEST to network hosts where roscore is running, and send back to you as rostopic message.
rosping is the tool to send ICMP ECHO_REQUEST to network hosts where roscore is running, and send back to you as rostopic message.
|
|
| 1 | 2024-07-10 | rospatlite |
rospatlite
rospatlite
|
|
| 1 | 2024-07-10 | ros_speech_recognition |
ROS wrapper for Python SpeechRecognition library
ROS wrapper for Python SpeechRecognition library
|
|
| 1 | 2024-07-10 | ros_google_cloud_language |
ros clinet library for google cloud language
ros clinet library for google cloud language
|
|
| 2 | 2024-07-10 | respeaker_ros |
The respeaker_ros package
The respeaker_ros package
|
|
| 1 | 2024-07-10 | pgm_learner |
Parameter/Structure Estimation and Inference for Bayesian Belief Network
Parameter/Structure Estimation and Inference for Bayesian Belief Network
|
|
| 1 | 2024-07-10 | osqp |
ROS wrapper for OSQP
ROS wrapper for OSQP
|
|
| 1 | 2024-07-10 | opt_camera |
opt_camera
opt_camera
|
|
| 1 | 2024-07-10 | nlopt |
nlopt
nlopt
|
|
| 1 | 2024-07-10 | nfc_ros |
The nfc_ros package
The nfc_ros package
|
|
| 1 | 2024-07-10 | mini_maxwell |
mini_maxwell
mini_maxwell
|
|
| 1 | 2024-07-10 | lpg_planner |
lpg_planner: LPGL Planner (http://zeus.ing.unibs.it/lpg/)
lpg_planner: LPGL Planner (http://zeus.ing.unibs.it/lpg/)
|
|
| 1 | 2024-07-10 | libsiftfast |
Library to compute SIFT features
Library to compute SIFT features
|
|
| 1 | 2024-07-10 | libcmt |
libCMT ROS Wrapper
libCMT ROS Wrapper
|
|
| 1 | 2024-07-10 | laser_filters_jsk_patch |
laser_filters_jsk_patch
laser_filters_jsk_patch
|
|
| 1 | 2024-07-10 | julius_ros |
The julius_ros package
The julius_ros package
|
|
| 1 | 2024-07-10 | julius |
julius: Open-Source Large Vocabulary CSR Engine (http://julius.sourceforge.jp/index.php)
julius: Open-Source Large Vocabulary CSR Engine (http://julius.sourceforge.jp/index.php)
|
|
| 1 | 2024-07-10 | jsk_3rdparty |
|
|
| 1 | 2024-07-10 | influxdb_store |
The influxdb_store package
The influxdb_store package
|
|
| 1 | 2024-07-10 | google_cloud_texttospeech |
The google_cloud_texttospeech package
The google_cloud_texttospeech package
|
|
| 1 | 2024-07-10 | google_chat_ros |
Use Google Chat API clients via ROS
Use Google Chat API clients via ROS
|
|
| 1 | 2024-07-10 | gdrive_ros |
Google drive upload and download package
Google drive upload and download package
|
|
| 1 | 2024-07-10 | ffha |
ffha: PDDL Planner (http://ipc.informatik.uni-freiburg.de)
ffha: PDDL Planner (http://ipc.informatik.uni-freiburg.de)
|
|
| 1 | 2024-07-10 | ff |
ff: pddl planner. see http://www.loria.fr/~hoffmanj/ff.html
ff: pddl planner. see http://www.loria.fr/~hoffmanj/ff.html
|
|
| 1 | 2024-07-10 | downward |
fast downward: PDDL Planner (http://www.fast-downward.org)
fast downward: PDDL Planner (http://www.fast-downward.org)
|
|
| 1 | 2024-07-10 | dialogflow_task_executive |
A ROS package for Google Dialogflow and launching apps via Dialogflow
A ROS package for Google Dialogflow and launching apps via Dialogflow
|
|
| 1 | 2024-07-10 | collada_urdf_jsk_patch |
unaccepted patch for collada_urdf
unaccepted patch for collada_urdf
|
|
| 1 | 2024-07-10 | chaplus_ros |
The ROS package for chaplus service
The ROS package for chaplus service
|
|
| 1 | 2024-07-10 | bayesian_belief_networks |
The bayesian_belief_networks package form https://github.com/eBay/bayesian-belief-networks, Authored by Neville Newey, Anzar Afaq, Copyright 2013 eBay Software Foundation
The bayesian_belief_networks package form https://github.com/eBay/bayesian-belief-networks, Authored by Neville Newey, Anzar Afaq, Copyright 2013 eBay Software Foundation
|
|
| 1 | 2024-07-10 | assimp_devel |
assimp library
assimp library
|
|
| 1 | 2024-07-10 | aques_talk |
ROS interface aques_talk demo program
ROS interface aques_talk demo program
|
|
| 1 | 2024-07-01 | rtmros_nextage |
The rtmros_nextage package is a ROS interface for
The rtmros_nextage package is a ROS interface for
|
|
| 1 | 2024-07-01 | nextage_ros_bridge |
A main ROS interface for developers and users of
A main ROS interface for developers and users of
|
|
| 1 | 2024-07-01 | nextage_moveit_config |
An automatically generated package with all the configuration and launch files for using the NextageOpen with the MoveIt Motion Planning Framework.
An automatically generated package with all the configuration and launch files for using the NextageOpen with the MoveIt Motion Planning Framework.
|
|
| 1 | 2024-07-01 | nextage_ik_plugin |
IKFast package for NEXTAGE Open
IKFast package for NEXTAGE Open
|
|
| 1 | 2024-07-01 | nextage_gazebo |
Gazebo simulation for NEXTAGE Open
Gazebo simulation for NEXTAGE Open
|
|
| 1 | 2024-07-01 | nextage_description |
As a part of rtmros_nextage package that is a ROS interface for
As a part of rtmros_nextage package that is a ROS interface for
|
|
| 1 | 2024-07-01 | nextage_calibration |
This package provides .launch files and other tools for
calibrating the head-mount cameras to the NEXTAGE Open robot.
As of version 0.7.15/March 2017, only Kinect/Xtion is capable (i.e. Ueye
cameras, the ones the robot comes with on this head by default, are not yet
handled).
This package provides .launch files and other tools for
calibrating the head-mount cameras to the NEXTAGE Open robot.
As of version 0.7.15/March 2017, only Kinect/Xtion is capable (i.e. Ueye
cameras, the ones the robot comes with on this head by default, are not yet
handled).
|
|
| 1 | 2024-06-19 | sick_safetyscanners |
Provides an Interface to read the sensor output of a SICK
Safety Scanner
Provides an Interface to read the sensor output of a SICK
Safety Scanner
|
|
| 1 | 2024-06-17 | marti_visualization_msgs |
marti_visualization_msgs
marti_visualization_msgs
|
|
| 1 | 2024-06-17 | marti_status_msgs |
marti_status_msgs
marti_status_msgs
|
|
| 1 | 2024-06-17 | marti_sensor_msgs |
marti_sensor_msgs
marti_sensor_msgs
|
|
| 1 | 2024-06-17 | marti_perception_msgs |
marti_perception_msgs
marti_perception_msgs
|
|
| 1 | 2024-06-17 | marti_nav_msgs |
marti_nav_msgs
marti_nav_msgs
|
|
| 1 | 2024-06-17 | marti_introspection_msgs |
marti_introspection_msgs
marti_introspection_msgs
|
|
| 1 | 2024-06-17 | marti_dbw_msgs |
marti_dbw_msgs
marti_dbw_msgs
|
|
| 1 | 2024-06-17 | marti_common_msgs |
marti_common_msgs
marti_common_msgs
|
|
| 1 | 2024-06-17 | marti_can_msgs |
marti_can_msgs
marti_can_msgs
|
|
| 4 | 2024-06-12 | tracetools |
Wrapper interface for tracing libraries
Wrapper interface for tracing libraries
|
|
| 1 | 2024-06-03 | swri_yaml_util |
Provides wrappers around the yaml-cpp library for various utility functions
and to abstract out the API changes made to yaml-cpp between ubuntu:precise
and ubuntu:trusty.
Provides wrappers around the yaml-cpp library for various utility functions
and to abstract out the API changes made to yaml-cpp between ubuntu:precise
and ubuntu:trusty.
|
|
| 1 | 2024-06-03 | swri_transform_util |
The swri_transform_util package contains utility functions and classes for
transforming between coordinate frames.
The swri_transform_util package contains utility functions and classes for
transforming between coordinate frames.
|
|
| 1 | 2024-06-03 | swri_system_util |
swri_system_util
swri_system_util
|
|
| 1 | 2024-06-03 | swri_string_util |
swri_string_util
swri_string_util
|
|
| 1 | 2024-06-03 | swri_serial_util |
swri_serial_util
swri_serial_util
|
|
| 1 | 2024-06-03 | swri_route_util |
This library provides functionality to simplify working with the
navigation messages defined in marti_nav_msgs.
This library provides functionality to simplify working with the
navigation messages defined in marti_nav_msgs.
|
|
| 1 | 2024-06-03 | swri_rospy |
This package provides added functionality on top of rospy, including a
single-threaded callback queue.
This package provides added functionality on top of rospy, including a
single-threaded callback queue.
|
|
| 1 | 2024-06-03 | swri_roscpp |
Enhancements to roscpp functionality to reduce boilerplate code and implement common patterns.
Enhancements to roscpp functionality to reduce boilerplate code and implement common patterns.
|
|
| 1 | 2024-06-03 | swri_prefix_tools |
Contains scripts that are useful as prefix commands for nodes
started by roslaunch.
Contains scripts that are useful as prefix commands for nodes
started by roslaunch.
|
|
| 1 | 2024-06-03 | swri_opencv_util |
swri_opencv_util
swri_opencv_util
|
|
| 1 | 2024-06-03 | swri_nodelet |
This package provides a simple script to write simple launch files
that can easily switch between running nodelets together or as
standalone nodes.
This package provides a simple script to write simple launch files
that can easily switch between running nodelets together or as
standalone nodes.
|
|
| 1 | 2024-06-03 | swri_math_util |
swri_math_util
swri_math_util
|
|
| 1 | 2024-06-03 | swri_image_util |
swri_image_util
swri_image_util
|
|
| 1 | 2024-06-03 | swri_geometry_util |
swri_geometry_util
swri_geometry_util
|
|
| 1 | 2024-06-03 | swri_dbw_interface |
This package provides documentation on common interface conventions for
drive-by-wire systems.
This package provides documentation on common interface conventions for
drive-by-wire systems.
|
|
| 1 | 2024-06-03 | swri_console_util |
swri_console_util
swri_console_util
|
|
| 1 | 2024-06-03 | swri_cli_tools |
rosman contains the rosman tool for introspecting ROS nodes
rosman contains the rosman tool for introspecting ROS nodes
|
|
| 1 | 2024-06-03 | marti_data_structures |
marti_data_structures
marti_data_structures
|
|
| 1 | 2024-05-28 | jsk_visualization |
|
|
| 1 | 2024-05-28 | jsk_rviz_plugins |
The jsk_rviz_plugins package
The jsk_rviz_plugins package
|
|
| 1 | 2024-05-28 | jsk_rqt_plugins |
The jsk_rqt_plugins package
The jsk_rqt_plugins package
|
|
| 1 | 2024-05-28 | jsk_interactive_test |
jsk_interactive_test
jsk_interactive_test
|
|
| 1 | 2024-05-28 | jsk_interactive_marker |
jsk interactive markers
jsk interactive markers
|
|
| 1 | 2024-05-28 | jsk_interactive |
jsk_interactive
jsk_interactive
|
|
| 1 | 2024-05-27 | libnabo |
libnabo is a fast K Nearest Neighbour library for low-dimensional spaces.
libnabo is a fast K Nearest Neighbour library for low-dimensional spaces.
|
|
| 3 | 2024-05-20 | rplidar_ros |
The rplidar ros package, support rplidar A1/A2/A3/S1/S2/S3/T1/C1
The rplidar ros package, support rplidar A1/A2/A3/S1/S2/S3/T1/C1
|
|
| 2 | 2024-05-15 | gpsd_client |
connects to a GPSd server and broadcasts GPS fixes
using the NavSatFix message
connects to a GPSd server and broadcasts GPS fixes
using the NavSatFix message
|
|
| 2 | 2024-05-15 | gps_umd |
gps_umd metapackage
gps_umd metapackage
|
|
| 2 | 2024-05-15 | gps_common |
GPS messages and common routines for use in GPS drivers
GPS messages and common routines for use in GPS drivers
|
|
| 1 | 2024-05-02 | tblib |
Traceback fiddling library. Allows you to pickle tracebacks.
Traceback fiddling library. Allows you to pickle tracebacks.
|
|
| 1 | 2024-05-01 | ypspur |
YP-Spur is a mobile robot motion control software with coordinate frame based commands.
YP-Spur is a mobile robot motion control software with coordinate frame based commands.
|
|
| 1 | 2024-05-01 | update_move_base_parameter_recovery |
The update_move_base_parameter_recovery package
The update_move_base_parameter_recovery package
|
|
| 1 | 2024-05-01 | unitreeeus |
The unitreeeus package
The unitreeeus package
|
|
| 1 | 2024-05-01 | speak_and_wait_recovery |
The speak_and_wait_recovery package for speak_and_wait_plugin
The speak_and_wait_recovery package for speak_and_wait_plugin
|
|
| 1 | 2024-05-01 | softhand_ros |
The Softhand ROS package
The Softhand ROS package
|
|
| 1 | 2024-05-01 | roseus_remote |
The jskeus_remote package
The jskeus_remote package
|
|
| 1 | 2024-05-01 | pr2_base_trajectory_action |
pr2_base_trajectory_action is a node that exposes and action
interface to move robot base along a trajectory.
pr2_base_trajectory_action is a node that exposes and action
interface to move robot base along a trajectory.
|
|
| 1 | 2024-05-01 | peppereus |
The pepper_bringup package
The pepper_bringup package
|
|
| 1 | 2024-05-01 | panda_eus |
euslisp utility for franka emika
euslisp utility for franka emika
|
|
| 1 | 2024-05-01 | naoqieus |
The naoqieus package
The naoqieus package
|
|
| 1 | 2024-05-01 | naoeus |
The naoeus package
The naoeus package
|
|
| 1 | 2024-05-01 | nao_jsk_teleop |
nao_jsk_teleop
nao_jsk_teleop
|
|
| 1 | 2024-05-01 | kinovaeus |
The kinovaeus package
The kinovaeus package
|
|
| 1 | 2024-05-01 | jsk_unitree_startup |
jsk_unitree_startup
jsk_unitree_startup
|
|
| 1 | 2024-05-01 | jsk_robot_utils |
jsk_robot_utils
jsk_robot_utils
|
|
| 1 | 2024-05-01 | jsk_robot_startup |
The jsk_robot_startup package
The jsk_robot_startup package
|
|
| 1 | 2024-05-01 | jsk_robot |
|
|
| 1 | 2024-05-01 | jsk_pr2_startup |
jsk_pr2_startup
jsk_pr2_startup
|
|
| 1 | 2024-05-01 | jsk_pr2_desktop |
Desktop Shortcuts for JSK PR2
Desktop Shortcuts for JSK PR2
|
|
| 1 | 2024-05-01 | jsk_pr2_calibration |
The jsk_pr2_calibration package
The jsk_pr2_calibration package
|
|
| 1 | 2024-05-01 | jsk_pr2_accessories |
jsk_pr2_accessories
jsk_pr2_accessories
|
|
| 1 | 2024-05-01 | jsk_pepper_startup |
The jsk_pepper_startup package
The jsk_pepper_startup package
|
|
| 1 | 2024-05-01 | jsk_panda_teleop |
Teleopration of dual-franka using TouchUSB
Teleopration of dual-franka using TouchUSB
|
|
| 1 | 2024-05-01 | jsk_panda_startup |
Startup utilities for dual arm panda (from franka emika)
Startup utilities for dual arm panda (from franka emika)
|
|
| 1 | 2024-05-01 | jsk_nao_startup |
The jsk_nao_startup package
The jsk_nao_startup package
|
|
| 1 | 2024-05-01 | jsk_magni_startup |
jsk_magni_startup
jsk_magni_startup
|
|
| 1 | 2024-05-01 | jsk_kinova_startup |
jsk_kinova_startup
jsk_kinova_startup
|
|
| 1 | 2024-05-01 | jsk_fetch_startup |
jsk_fetch_startup
data/boost_sound.wav is downloaded from https://www.youtube.com/watch?v=HM-xG0qXaeA
jsk_fetch_startup
data/boost_sound.wav is downloaded from https://www.youtube.com/watch?v=HM-xG0qXaeA
|
|
| 1 | 2024-05-01 | jsk_fetch_gazebo_demo |
Fetch gazebo demo for roseus implementation
Fetch gazebo demo for roseus implementation
|
|
| 1 | 2024-05-01 | jsk_fetch_diagnosis |
The fetch_diagnosis package
The fetch_diagnosis package
|
|
| 1 | 2024-05-01 | jsk_fetch_accessories |
jsk_fetch_accessories
jsk_fetch_accessories
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 1 | 2024-11-12 | virtual_force_publisher |
publish end effector's force, which is estmated from joint torque value
publish end effector's force, which is estmated from joint torque value
|
|
| 1 | 2024-11-12 | multi_map_server |
multi_map_server provides the
multi_map_server provides the
|
|
| 1 | 2024-11-12 | jsk_topic_tools |
jsk_topic_tools
jsk_topic_tools
|
|
| 1 | 2024-11-12 | jsk_tools |
Includes emacs scripts, ros tool alias generator, and launch doc generator.
Includes emacs scripts, ros tool alias generator, and launch doc generator.
|
|
| 1 | 2024-11-12 | jsk_tilt_laser |
The jsk_tilt_laser package
The jsk_tilt_laser package
|
|
| 1 | 2024-11-12 | jsk_rosbag_tools |
The rosbag tools
The rosbag tools
|
|
| 1 | 2024-11-12 | jsk_network_tools |
jsk_network_tools
jsk_network_tools
|
|
| 1 | 2024-11-12 | jsk_data |
The jsk_data package
The jsk_data package
|
|
| 1 | 2024-11-12 | jsk_common |
|
|
| 1 | 2024-11-12 | image_view2 |
A simple viewer for ROS image topics with draw-on features
A simple viewer for ROS image topics with draw-on features
|
|
| 1 | 2024-11-12 | dynamic_tf_publisher |
dynamically set the tf trensformation
dynamically set the tf trensformation
|
|
| 1 | 2024-11-12 | audio_video_recorder |
ROS package for recording image and audio synchronously
ROS package for recording image and audio synchronously
|
|
| 1 | 2024-10-29 | sound_classification |
The sound_classification package
The sound_classification package
|
|
| 1 | 2024-10-29 | resized_image_transport |
ROS nodes to publish resized images.
ROS nodes to publish resized images.
|
|
| 1 | 2024-10-29 | jsk_recognition_utils |
C++ library about sensor model, geometrical modeling and perception.
C++ library about sensor model, geometrical modeling and perception.
|
|
| 1 | 2024-10-29 | jsk_recognition_msgs |
ROS messages for jsk_pcl_ros and jsk_perception.
ROS messages for jsk_pcl_ros and jsk_perception.
|
|
| 1 | 2024-10-29 | jsk_recognition |
|
|
| 1 | 2024-10-29 | jsk_perception |
ROS nodes and nodelets for 2-D image perception.
ROS nodes and nodelets for 2-D image perception.
|
|
| 1 | 2024-10-29 | jsk_pcl_ros_utils |
ROS utility nodelets for pointcloud perception.
ROS utility nodelets for pointcloud perception.
|
|
| 1 | 2024-10-29 | jsk_pcl_ros |
ROS nodelets for pointcloud perception.
ROS nodelets for pointcloud perception.
|
|
| 1 | 2024-10-29 | imagesift |
For every image, computes its sift features and send a new message with the image, its intrinsic parameters, and the features.
Parameters include:
display - shows the image on the local computer
For every image, computes its sift features and send a new message with the image, its intrinsic parameters, and the features.
Parameters include:
display - shows the image on the local computer
|
|
| 1 | 2024-10-29 | checkerboard_detector |
Uses opencv to find checkboards and compute their 6D poses with respect to the image. Requires the image to be calibrated.
Uses opencv to find checkboards and compute their 6D poses with respect to the image. Requires the image to be calibrated.
|
|
| 1 | 2024-10-29 | audio_to_spectrogram |
Convert audio (audio_common_msgs/AudioData) to spectrogram (sensor_msgs/Image)
Convert audio (audio_common_msgs/AudioData) to spectrogram (sensor_msgs/Image)
|
|
| 1 | 2024-10-28 | python_orocos_kdl |
This package contains the python bindings PyKDL for the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains the python bindings PyKDL for the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 3 | 2024-10-28 | orocos_kdl |
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 1 | 2024-10-13 | random_numbers |
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
|
|
| 2 | 2024-09-14 | libpointmatcher |
libpointmatcher is a modular ICP library, useful for robotics and computer vision.
libpointmatcher is a modular ICP library, useful for robotics and computer vision.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_support |
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_pg70_support |
PRBT support for Schunk pg70 gripper.
PRBT support for Schunk pg70 gripper.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_moveit_config |
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_ikfast_manipulator_plugin |
The prbt_ikfast_manipulator_plugin package
The prbt_ikfast_manipulator_plugin package
|
|
| 1 | 2024-08-29 | moveit_resources_pr2_description |
PR2 Resources used for MoveIt! testing
PR2 Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_panda_moveit_config |
|
|
| 1 | 2024-08-29 | moveit_resources_panda_description |
panda Resources used for MoveIt! testing
panda Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_fanuc_moveit_config |
|
|
| 1 | 2024-08-29 | moveit_resources_fanuc_description |
Fanuc Resources used for MoveIt! testing
Fanuc Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_dual_panda_moveit_config |
An automatically generated package with all the configuration and launch files for using the panda with the MoveIt Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the panda with the MoveIt Motion Planning Framework
|
|
| 1 | 2024-08-29 | moveit_resources |
Resources used for MoveIt! testing
Resources used for MoveIt! testing
|
|
| 1 | 2024-08-06 | pr2_gripper_sensor_msgs |
The pr2_gripper_sensor_msgs package contains various actions and messages that are used in the pr2_gripper_sensor* packages. The structure of the API used by pr2_gripper_sensor_action, and pr2_gripper_sensor_controller packages is as follows:
Users will send a goal to an Action in the message format of PR2Gripper*Command (where * replaces the name of the particular Action from pr2_gripper_sensor_action). Feedback and Result information for the action is then returned in the format of PR2Gripper*Data.
The pr2_gripper_sensor_msgs package contains various actions and messages that are used in the pr2_gripper_sensor* packages. The structure of the API used by pr2_gripper_sensor_action, and pr2_gripper_sensor_controller packages is as follows:
Users will send a goal to an Action in the message format of PR2Gripper*Command (where * replaces the name of the particular Action from pr2_gripper_sensor_action). Feedback and Result information for the action is then returned in the format of PR2Gripper*Data.
|
|
| 1 | 2024-08-06 | pr2_gripper_sensor_controller |
The pr2_gripper_sensor_controller package is a real-time controller that integrates signals from the PR2 hand-mounted accelerometer and finger-mounted pressure sensors with motor control of the gripper joint to do highly responsive sensing and low-latency closed-loop control.
The pr2_gripper_sensor_controller package is a real-time controller that integrates signals from the PR2 hand-mounted accelerometer and finger-mounted pressure sensors with motor control of the gripper joint to do highly responsive sensing and low-latency closed-loop control.
|
|
| 1 | 2024-08-06 | pr2_gripper_sensor_action |
The pr2_gripper_sensor_action package provides an action interface for talking to the pr2_gripper_sensor_controller real-time controller.
It provides several different actions for getting high-level sensor information from the PR2 palm-mounted accelerometers, fingertip pressure arrays, and gripper motor/encoder, as well as several sensor-based gripper control actions that respond with low-latency in real-time.
The pr2_gripper_sensor_action package provides an action interface for talking to the pr2_gripper_sensor_controller real-time controller.
It provides several different actions for getting high-level sensor information from the PR2 palm-mounted accelerometers, fingertip pressure arrays, and gripper motor/encoder, as well as several sensor-based gripper control actions that respond with low-latency in real-time.
|
|
| 1 | 2024-08-06 | pr2_gripper_sensor |
The pr2_gripper_sensor package
The pr2_gripper_sensor package
|
|
| 1 | 2024-07-10 | zdepth_image_transport |
The zdepth_image_transport package
The zdepth_image_transport package
|
|
| 1 | 2024-07-10 | zdepth |
The zdepth package
The zdepth package
|
|
| 1 | 2024-07-10 | webrtcvad_ros |
This package provides a wrapper node for webrtcvad. It subscribes an audio topic and publish a flag if curretly speeched or not with VAD.
This package provides a wrapper node for webrtcvad. It subscribes an audio topic and publish a flag if curretly speeched or not with VAD.
|
|
| 1 | 2024-07-10 | voice_text |
voice_text (www.voicetext.jp)
voice_text (www.voicetext.jp)
|
|
| 1 | 2024-07-10 | switchbot_ros |
use switchbot with ros
use switchbot with ros
|
|
| 1 | 2024-07-10 | slic |
SLIC-Superpizel ROS Wrapper
This file contains the class elements of the class Slic. This class is an
implementation of the SLIC Superpixel algorithm by Achanta et al. [PAMI'12,
vol. 34, num. 11, pp. 2274-2282].
This implementation is created for the specific purpose of creating
over-segmentations in an OpenCV-based environment.
SLIC-Superpizel ROS Wrapper
This file contains the class elements of the class Slic. This class is an
implementation of the SLIC Superpixel algorithm by Achanta et al. [PAMI'12,
vol. 34, num. 11, pp. 2274-2282].
This implementation is created for the specific purpose of creating
over-segmentations in an OpenCV-based environment.
|
|
| 1 | 2024-07-10 | sesame_ros |
ROS API for Sesame smart lock
ROS API for Sesame smart lock
|
|
| 1 | 2024-07-10 | rostwitter |
The rostwitter package
The rostwitter package
|
|
| 1 | 2024-07-10 | rosping |
rosping is the tool to send ICMP ECHO_REQUEST to network hosts where roscore is running, and send back to you as rostopic message.
rosping is the tool to send ICMP ECHO_REQUEST to network hosts where roscore is running, and send back to you as rostopic message.
|
|
| 1 | 2024-07-10 | rospatlite |
rospatlite
rospatlite
|
|
| 1 | 2024-07-10 | ros_speech_recognition |
ROS wrapper for Python SpeechRecognition library
ROS wrapper for Python SpeechRecognition library
|
|
| 1 | 2024-07-10 | ros_google_cloud_language |
ros clinet library for google cloud language
ros clinet library for google cloud language
|
|
| 2 | 2024-07-10 | respeaker_ros |
The respeaker_ros package
The respeaker_ros package
|
|
| 1 | 2024-07-10 | pgm_learner |
Parameter/Structure Estimation and Inference for Bayesian Belief Network
Parameter/Structure Estimation and Inference for Bayesian Belief Network
|
|
| 1 | 2024-07-10 | osqp |
ROS wrapper for OSQP
ROS wrapper for OSQP
|
|
| 1 | 2024-07-10 | opt_camera |
opt_camera
opt_camera
|
|
| 1 | 2024-07-10 | nlopt |
nlopt
nlopt
|
|
| 1 | 2024-07-10 | nfc_ros |
The nfc_ros package
The nfc_ros package
|
|
| 1 | 2024-07-10 | mini_maxwell |
mini_maxwell
mini_maxwell
|
|
| 1 | 2024-07-10 | lpg_planner |
lpg_planner: LPGL Planner (http://zeus.ing.unibs.it/lpg/)
lpg_planner: LPGL Planner (http://zeus.ing.unibs.it/lpg/)
|
|
| 1 | 2024-07-10 | libsiftfast |
Library to compute SIFT features
Library to compute SIFT features
|
|
| 1 | 2024-07-10 | libcmt |
libCMT ROS Wrapper
libCMT ROS Wrapper
|
|
| 1 | 2024-07-10 | laser_filters_jsk_patch |
laser_filters_jsk_patch
laser_filters_jsk_patch
|
|
| 1 | 2024-07-10 | julius_ros |
The julius_ros package
The julius_ros package
|
|
| 1 | 2024-07-10 | julius |
julius: Open-Source Large Vocabulary CSR Engine (http://julius.sourceforge.jp/index.php)
julius: Open-Source Large Vocabulary CSR Engine (http://julius.sourceforge.jp/index.php)
|
|
| 1 | 2024-07-10 | jsk_3rdparty |
|
|
| 1 | 2024-07-10 | influxdb_store |
The influxdb_store package
The influxdb_store package
|
|
| 1 | 2024-07-10 | google_cloud_texttospeech |
The google_cloud_texttospeech package
The google_cloud_texttospeech package
|
|
| 1 | 2024-07-10 | google_chat_ros |
Use Google Chat API clients via ROS
Use Google Chat API clients via ROS
|
|
| 1 | 2024-07-10 | gdrive_ros |
Google drive upload and download package
Google drive upload and download package
|
|
| 1 | 2024-07-10 | ffha |
ffha: PDDL Planner (http://ipc.informatik.uni-freiburg.de)
ffha: PDDL Planner (http://ipc.informatik.uni-freiburg.de)
|
|
| 1 | 2024-07-10 | ff |
ff: pddl planner. see http://www.loria.fr/~hoffmanj/ff.html
ff: pddl planner. see http://www.loria.fr/~hoffmanj/ff.html
|
|
| 1 | 2024-07-10 | downward |
fast downward: PDDL Planner (http://www.fast-downward.org)
fast downward: PDDL Planner (http://www.fast-downward.org)
|
|
| 1 | 2024-07-10 | dialogflow_task_executive |
A ROS package for Google Dialogflow and launching apps via Dialogflow
A ROS package for Google Dialogflow and launching apps via Dialogflow
|
|
| 1 | 2024-07-10 | collada_urdf_jsk_patch |
unaccepted patch for collada_urdf
unaccepted patch for collada_urdf
|
|
| 1 | 2024-07-10 | chaplus_ros |
The ROS package for chaplus service
The ROS package for chaplus service
|
|
| 1 | 2024-07-10 | bayesian_belief_networks |
The bayesian_belief_networks package form https://github.com/eBay/bayesian-belief-networks, Authored by Neville Newey, Anzar Afaq, Copyright 2013 eBay Software Foundation
The bayesian_belief_networks package form https://github.com/eBay/bayesian-belief-networks, Authored by Neville Newey, Anzar Afaq, Copyright 2013 eBay Software Foundation
|
|
| 1 | 2024-07-10 | assimp_devel |
assimp library
assimp library
|
|
| 1 | 2024-07-10 | aques_talk |
ROS interface aques_talk demo program
ROS interface aques_talk demo program
|
|
| 1 | 2024-05-28 | jsk_visualization |
|
|
| 1 | 2024-05-28 | jsk_rviz_plugins |
The jsk_rviz_plugins package
The jsk_rviz_plugins package
|
|
| 1 | 2024-05-28 | jsk_rqt_plugins |
The jsk_rqt_plugins package
The jsk_rqt_plugins package
|
|
| 1 | 2024-05-28 | jsk_interactive_test |
jsk_interactive_test
jsk_interactive_test
|
|
| 1 | 2024-05-28 | jsk_interactive_marker |
jsk interactive markers
jsk interactive markers
|
|
| 1 | 2024-05-28 | jsk_interactive |
jsk_interactive
jsk_interactive
|
|
| 1 | 2024-05-27 | libnabo |
libnabo is a fast K Nearest Neighbour library for low-dimensional spaces.
libnabo is a fast K Nearest Neighbour library for low-dimensional spaces.
|
|
| 1 | 2024-05-01 | update_move_base_parameter_recovery |
The update_move_base_parameter_recovery package
The update_move_base_parameter_recovery package
|
|
| 1 | 2024-05-01 | unitreeeus |
The unitreeeus package
The unitreeeus package
|
|
| 1 | 2024-05-01 | speak_and_wait_recovery |
The speak_and_wait_recovery package for speak_and_wait_plugin
The speak_and_wait_recovery package for speak_and_wait_plugin
|
|
| 1 | 2024-05-01 | softhand_ros |
The Softhand ROS package
The Softhand ROS package
|
|
| 1 | 2024-05-01 | roseus_remote |
The jskeus_remote package
The jskeus_remote package
|
|
| 1 | 2024-05-01 | pr2_base_trajectory_action |
pr2_base_trajectory_action is a node that exposes and action
interface to move robot base along a trajectory.
pr2_base_trajectory_action is a node that exposes and action
interface to move robot base along a trajectory.
|
|
| 1 | 2024-05-01 | peppereus |
The pepper_bringup package
The pepper_bringup package
|
|
| 1 | 2024-05-01 | panda_eus |
euslisp utility for franka emika
euslisp utility for franka emika
|
|
| 1 | 2024-05-01 | naoqieus |
The naoqieus package
The naoqieus package
|
|
| 1 | 2024-05-01 | naoeus |
The naoeus package
The naoeus package
|
|
| 1 | 2024-05-01 | nao_jsk_teleop |
nao_jsk_teleop
nao_jsk_teleop
|
|
| 1 | 2024-05-01 | kinovaeus |
The kinovaeus package
The kinovaeus package
|
|
| 1 | 2024-05-01 | jsk_unitree_startup |
jsk_unitree_startup
jsk_unitree_startup
|
|
| 1 | 2024-05-01 | jsk_robot_utils |
jsk_robot_utils
jsk_robot_utils
|
|
| 1 | 2024-05-01 | jsk_robot_startup |
The jsk_robot_startup package
The jsk_robot_startup package
|
|
| 1 | 2024-05-01 | jsk_robot |
|
|
| 1 | 2024-05-01 | jsk_pr2_startup |
jsk_pr2_startup
jsk_pr2_startup
|
|
| 1 | 2024-05-01 | jsk_pr2_desktop |
Desktop Shortcuts for JSK PR2
Desktop Shortcuts for JSK PR2
|
|
| 1 | 2024-05-01 | jsk_pr2_calibration |
The jsk_pr2_calibration package
The jsk_pr2_calibration package
|
|
| 1 | 2024-05-01 | jsk_pr2_accessories |
jsk_pr2_accessories
jsk_pr2_accessories
|
|
| 1 | 2024-05-01 | jsk_pepper_startup |
The jsk_pepper_startup package
The jsk_pepper_startup package
|
|
| 1 | 2024-05-01 | jsk_panda_teleop |
Teleopration of dual-franka using TouchUSB
Teleopration of dual-franka using TouchUSB
|
|
| 1 | 2024-05-01 | jsk_panda_startup |
Startup utilities for dual arm panda (from franka emika)
Startup utilities for dual arm panda (from franka emika)
|
|
| 1 | 2024-05-01 | jsk_nao_startup |
The jsk_nao_startup package
The jsk_nao_startup package
|
|
| 1 | 2024-05-01 | jsk_magni_startup |
jsk_magni_startup
jsk_magni_startup
|
|
| 1 | 2024-05-01 | jsk_kinova_startup |
jsk_kinova_startup
jsk_kinova_startup
|
|
| 1 | 2024-05-01 | jsk_fetch_startup |
jsk_fetch_startup
data/boost_sound.wav is downloaded from https://www.youtube.com/watch?v=HM-xG0qXaeA
jsk_fetch_startup
data/boost_sound.wav is downloaded from https://www.youtube.com/watch?v=HM-xG0qXaeA
|
|
| 1 | 2024-05-01 | jsk_fetch_gazebo_demo |
Fetch gazebo demo for roseus implementation
Fetch gazebo demo for roseus implementation
|
|
| 1 | 2024-05-01 | jsk_fetch_diagnosis |
The fetch_diagnosis package
The fetch_diagnosis package
|
|
| 1 | 2024-05-01 | jsk_fetch_accessories |
jsk_fetch_accessories
jsk_fetch_accessories
|
|
| 1 | 2024-05-01 | jsk_cobotta_startup |
jsk_cobotta_startup
jsk_cobotta_startup
|
|
| 1 | 2024-05-01 | jsk_baxter_web |
The jsk_baxter_web package
The jsk_baxter_web package
|
|
| 1 | 2024-05-01 | jsk_baxter_startup |
The jsk_baxter_startup package
The jsk_baxter_startup package
|
|
| 1 | 2024-05-01 | jsk_baxter_desktop |
The jsk_baxter_desktop package
The jsk_baxter_desktop package
|
|
| 1 | 2024-05-01 | jsk_aero_startup |
The jsk_aero_startup package
The jsk_aero_startup package
|
|
| 1 | 2024-05-01 | jsk_201504_miraikan |
The jsk_201504_miraikan package
The jsk_201504_miraikan package
|
|
| 1 | 2024-05-01 | fetcheus |
The fetcheus package
The fetcheus package
|
|
| 1 | 2024-05-01 | cobottaeus |
The cobottas package
The cobottas package
|
|
| 1 | 2024-05-01 | baxtereus |
The baxtereus package
The baxtereus package
|
|
| 1 | 2024-05-01 | aeroeus |
The aeroeus package
The aeroeus package
|
|
| 1 | 2024-04-16 | rosdoc_lite |
This ROS package wraps documentation tools like doxygen, sphinx,
and epydoc, making it convenient to generate ROS package
documentation.
It also generates online documentation for the ROS wiki.
This ROS package wraps documentation tools like doxygen, sphinx,
and epydoc, making it convenient to generate ROS package
documentation.
It also generates online documentation for the ROS wiki.
|
|
| 2 | 2024-04-10 | usb_cam |
A ROS Driver for V4L USB Cameras
A ROS Driver for V4L USB Cameras
|
|
| 2 | 2024-04-01 | octovis |
octovis is visualization tool for the OctoMap library based on Qt and libQGLViewer. See
http://octomap.github.io for details.
octovis is visualization tool for the OctoMap library based on Qt and libQGLViewer. See
http://octomap.github.io for details.
|
|
| 2 | 2024-04-01 | octomap |
The OctoMap library implements a 3D occupancy grid mapping approach, providing data structures and mapping algorithms in C++. The map implementation is based on an octree. See
http://octomap.github.io for details.
The OctoMap library implements a 3D occupancy grid mapping approach, providing data structures and mapping algorithms in C++. The map implementation is based on an octree. See
http://octomap.github.io for details.
|
|
| 2 | 2024-04-01 | dynamic_edt_3d |
The dynamicEDT3D library implements an inrementally updatable Euclidean distance transform (EDT) in 3D. It comes with a wrapper to use the OctoMap 3D representation and hooks into the change detection of the OctoMap library to propagate changes to the EDT.
The dynamicEDT3D library implements an inrementally updatable Euclidean distance transform (EDT) in 3D. It comes with a wrapper to use the OctoMap 3D representation and hooks into the change detection of the OctoMap library to propagate changes to the EDT.
|
|
| 1 | 2024-01-22 | jsk_teleop_joy |
jsk_teleop_joy
jsk_teleop_joy
|
|
| 1 | 2024-01-22 | jsk_ik_server |
jsk_ik_server
jsk_ik_server
|
|
| 1 | 2024-01-22 | jsk_footstep_planner |
jsk_footstep_planner
jsk_footstep_planner
|
|
| 1 | 2024-01-22 | jsk_footstep_controller |
The jsk_footstep_controller package
The jsk_footstep_controller package
|
|
| 1 | 2024-01-22 | jsk_control |
The jsk_control package
The jsk_control package
|
|
| 1 | 2024-01-22 | jsk_calibration |
The jsk_calibration package
The jsk_calibration package
|
|
| 1 | 2024-01-22 | joy_mouse |
The joy_mouse package
The joy_mouse package
|
|
| 1 | 2024-01-22 | eus_teleop |
The eus_teleop package
The eus_teleop package
|
|
| 1 | 2024-01-22 | eus_qpoases |
eus_qpoases
eus_qpoases
|
|
| 1 | 2024-01-22 | eus_qp |
eus_qp is an interface of euslisp to solve qp problems with linear constraints.
eus_qp is an interface of euslisp to solve qp problems with linear constraints.
|
|
| 1 | 2024-01-22 | eus_nlopt |
eus_nlopt
eus_nlopt
|
|
| 1 | 2024-01-22 | contact_states_observer |
The contact_states_observer package
The contact_states_observer package
|
|
| 1 | 2024-01-22 | cmd_vel_smoother |
The cmd_vel_smoother package
The cmd_vel_smoother package
|
|
| 1 | 2023-12-05 | task_compiler |
task_compiler
Compiler that translate task description in PDDL (Planning Domain Description Language) to SMACH (state machine based execution and coordination system) description.
task_compiler
Compiler that translate task description in PDDL (Planning Domain Description Language) to SMACH (state machine based execution and coordination system) description.
|
|
| 1 | 2023-12-05 | pddl_planner_viewer |
a viewer of pddl_planner.
a viewer of pddl_planner.
|
|
| 1 | 2023-12-05 | pddl_planner |
pddl planner wrappers
pddl planner wrappers
|
|
| 1 | 2023-12-05 | pddl_msgs |
message for pddl planner
message for pddl planner
|
|
| 1 | 2023-12-05 | jsk_planning |
|
|
| 1 | 2023-12-04 | fcl |
FCL is a collision checking library
FCL is a collision checking library
|
|
| 1 | 2023-11-15 | nao_gazebo_plugin |
The nao_gazebo_plugin package
The nao_gazebo_plugin package
|
|
| 1 | 2023-11-15 | nao_control |
The nao_control package
The nao_control package
|
|
| 1 | 2023-10-13 | pepper_sensors_py |
The pepper_sensors package
The pepper_sensors package
|
|
| 1 | 2023-10-13 | pepper_robot |
The pepper_robot package
The pepper_robot package
|
|
| 1 | 2023-10-13 | pepper_description |
The pepper_description package
The pepper_description package
|
|
| 1 | 2023-10-13 | pepper_bringup |
The pepper_bringup package
The pepper_bringup package
|
|
| 1 | 2023-09-26 | robotnik_msgs |
The robotnik_msgs package. Common messages and services used by some Robotnik's packages.
The robotnik_msgs package. Common messages and services used by some Robotnik's packages.
|
|
| 1 | 2023-08-04 | rtmros_common |
A package suite that provides all the capabilities for
the ROS users to connect to the robots that run on
A package suite that provides all the capabilities for
the ROS users to connect to the robots that run on
|
|
| 1 | 2023-08-04 | rtmbuild |
Build scripts for OpenRTM and OpenHRP
Build scripts for OpenRTM and OpenHRP
|
|
| 1 | 2023-08-04 | rosnode_rtc |
This package gives transparency between RTM and ROS.
rtmros-data-bridge.py is a RT-Component for dataport/topic.
This automatically convert ROS/topic into RTM/dataport.
This package gives transparency between RTM and ROS.
rtmros-data-bridge.py is a RT-Component for dataport/topic.
This automatically convert ROS/topic into RTM/dataport.
|
|
| 1 | 2023-08-04 | openrtm_tools |
The openrtm_tools package
The openrtm_tools package
|
|
| 1 | 2023-08-04 | openrtm_ros_bridge |
openrtm_ros_bridge package provides basic functionalities to bind
two robotics framework:
openrtm_ros_bridge package provides basic functionalities to bind
two robotics framework:
|
|
| 1 | 2023-08-04 | hrpsys_tools |
The hrpsys_tools package
The hrpsys_tools package
|
|
| 1 | 2023-08-04 | hrpsys_ros_bridge |
hrpsys_ros_bridge package provides basic functionalities to bind
hrpsys_ros_bridge package provides basic functionalities to bind
|
|
| 1 | 2023-06-22 | pr2eus_tutorials |
pr2eus_tutorials
pr2eus_tutorials
|
|
| 1 | 2023-06-22 | pr2eus_openrave |
pr2eus_openrave
pr2eus_openrave
|
|
| 1 | 2023-06-22 | pr2eus_moveit |
pr2eus_moveit
pr2eus_moveit
|
|
| 1 | 2023-06-22 | pr2eus_impedance |
pr2eus_impedance
pr2eus_impedance
|
|
| 1 | 2023-06-22 | pr2eus_armnavigation |
pr2eus_armnavigation
pr2eus_armnavigation
|
|
| 1 | 2023-06-22 | pr2eus |
pr2eus
pr2eus
|
|
| 1 | 2023-06-22 | jsk_pr2eus |
|
|
| 1 | 2023-06-01 | velodyne_pointcloud |
Point cloud conversions for Velodyne 3D LIDARs.
Point cloud conversions for Velodyne 3D LIDARs.
|
|
| 1 | 2023-06-01 | velodyne_pcl |
The velodyne_pcl package
The velodyne_pcl package
|
|
| 1 | 2023-06-01 | velodyne_msgs |
ROS message definitions for Velodyne 3D LIDARs.
ROS message definitions for Velodyne 3D LIDARs.
|
|
| 1 | 2023-06-01 | velodyne_laserscan |
Extract a single ring of a Velodyne PointCloud2 and publish it as a LaserScan message
Extract a single ring of a Velodyne PointCloud2 and publish it as a LaserScan message
|
|
| 1 | 2023-06-01 | velodyne_driver |
ROS device driver for Velodyne 3D LIDARs.
ROS device driver for Velodyne 3D LIDARs.
|
|
| 1 | 2023-06-01 | velodyne |
Basic ROS support for the Velodyne 3D LIDARs.
Basic ROS support for the Velodyne 3D LIDARs.
|
|
| 1 | 2023-04-25 | console_bridge |
Lightweight tool for forwarding output from libraries to other logging systems.
Lightweight tool for forwarding output from libraries to other logging systems.
|
|
| 1 | 2023-03-28 | roslisp_utilities |
Some utility functionality to interact with ROS using roslisp.
Some utility functionality to interact with ROS using roslisp.
|
|
| 1 | 2023-03-28 | roslisp_common |
Common libraries to control ROS based robots. This stack contains
an implementation of actionlib (client and server) in Common Lisp,
a transformation library and an implementation of tf in Common
Lisp.
Common libraries to control ROS based robots. This stack contains
an implementation of actionlib (client and server) in Common Lisp,
a transformation library and an implementation of tf in Common
Lisp.
|
|
| 1 | 2023-03-28 | cl_utils |
Common Lisp utility libraries
Common Lisp utility libraries
|
|
| 1 | 2023-03-28 | cl_urdf |
cl_urdf
cl_urdf
|
|
| 1 | 2023-03-28 | cl_transforms_stamped |
Implementation of TF datatypes
Implementation of TF datatypes
|
|
| 1 | 2023-03-28 | cl_transforms |
Homogeneous transform library for Common Lisp.
Homogeneous transform library for Common Lisp.
|
|
| 1 | 2023-03-28 | cl_tf2 |
Client implementation to use TF2 from Common Lisp
Client implementation to use TF2 from Common Lisp
|
|
| 1 | 2023-03-28 | cl_tf |
Client implementation to use TF from Common Lisp
Client implementation to use TF from Common Lisp
|
|
| 1 | 2023-03-28 | actionlib_lisp |
actionlib_lisp is a native implementation of the famous actionlib
in Common Lisp. It provides a client and a simple server.
actionlib_lisp is a native implementation of the famous actionlib
in Common Lisp. It provides a client and a simple server.
|
|
| 2 | 2023-03-17 | axis_camera |
Python ROS drivers for accessing an Axis camera's MJPG
stream. Also provides control for PTZ cameras.
Python ROS drivers for accessing an Axis camera's MJPG
stream. Also provides control for PTZ cameras.
|
|
| 1 | 2023-03-05 | uuid_msgs |
ROS messages for universally unique identifiers.
ROS messages for universally unique identifiers.
|
|
| 1 | 2023-03-05 | unique_identifier |
ROS messages and interfaces for universally unique identifiers.
Not needed for wet packages, use only to resolve dry stack
dependencies.
ROS messages and interfaces for universally unique identifiers.
Not needed for wet packages, use only to resolve dry stack
dependencies.
|
|
| 1 | 2023-03-05 | unique_id |
ROS Python and C++ interfaces for universally unique identifiers.
ROS Python and C++ interfaces for universally unique identifiers.
|
|
| 1 | 2023-03-05 | roslint |
CMake lint commands for ROS packages.
The lint commands perform static checking of Python or C++ source
code for errors and standards compliance.
CMake lint commands for ROS packages.
The lint commands perform static checking of Python or C++ source
code for errors and standards compliance.
|
|
| 1 | 2023-02-15 | roslisp |
Lisp client library for ROS, the Robot Operating System.
Lisp client library for ROS, the Robot Operating System.
|
|
| 1 | 2023-01-30 | roseus_tutorials |
roseus_tutorials
roseus_tutorials
|
|
| 1 | 2023-01-30 | roseus_smach |
roseus_smach
* Euslisp state machine class. it will be moved.
* Message publisher for visualizing current state by smach_viewer.
* Simple pickle dump script for debugging state machine.
* Execute state machine as a action server.
roseus_smach
* Euslisp state machine class. it will be moved.
* Message publisher for visualizing current state by smach_viewer.
* Simple pickle dump script for debugging state machine.
* Execute state machine as a action server.
|
|
| 1 | 2023-01-30 | roseus_mongo |
The roseus_mongo package
The roseus_mongo package
|
|
| 1 | 2023-01-30 | roseus |
EusLisp client for ROS Robot Operating System.
EusLisp client for ROS Robot Operating System.
|
|
| 1 | 2023-01-30 | jsk_roseus |
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | mvsim |
A lightweight multivehicle simulation framework.
A lightweight multivehicle simulation framework.
|
|
| 1 | 2024-12-04 | coal |
An extension of the Flexible Collision Library.
An extension of the Flexible Collision Library.
|
|
| 1 | 2024-12-03 | pinocchio |
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
|
|
| 1 | 2024-12-02 | webargs |
A friendly library for parsing HTTP request arguments, with built-in support for popular web frameworks, including Flask, Django, Bottle, Tornado, Pyramid, webapp2, Falcon, and aiohttp.
A friendly library for parsing HTTP request arguments, with built-in support for popular web frameworks, including Flask, Django, Bottle, Tornado, Pyramid, webapp2, Falcon, and aiohttp.
|
|
| 1 | 2024-12-02 | test_catkin_virtualenv_inherited |
Test to make sure a package inherits it's dependency's dependencies, but is able to override the version.
Test to make sure a package inherits it's dependency's dependencies, but is able to override the version.
|
|
| 1 | 2024-12-02 | test_catkin_virtualenv |
Basic catkin_virtualenv test.
Basic catkin_virtualenv test.
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 1 | 2024-12-02 | json_transport |
JSON transport for ROS
JSON transport for ROS
|
|
| 1 | 2024-12-02 | json_msgs |
JSON ROS message
JSON ROS message
|
|
| 1 | 2024-12-02 | gtsam |
gtsam
gtsam
|
|
| 1 | 2024-12-02 | catkin_virtualenv |
Bundle python requirements in a catkin package via virtualenv.
Bundle python requirements in a catkin package via virtualenv.
|
|
| 1 | 2024-11-28 | xarm_sdk |
The xarm_sdk package
The xarm_sdk package
|
|
| 1 | 2024-11-28 | xarm_planner |
The xarm_planner package
The xarm_planner package
|
|
| 1 | 2024-11-28 | xarm_msgs |
The xarm_msgs package
The xarm_msgs package
|
|
| 1 | 2024-11-28 | xarm_moveit_servo |
The xarm_moveit_servo package
The xarm_moveit_servo package
|
|
| 1 | 2024-11-28 | xarm_gripper |
|
|
| 1 | 2024-11-28 | xarm_gazebo |
The xarm_gazebo package
The xarm_gazebo package
|
|
| 1 | 2024-11-28 | xarm_description |
The xarm_description package
The xarm_description package
|
|
| 1 | 2024-11-28 | xarm_controller |
The xarm_controller package
The xarm_controller package
|
|
| 1 | 2024-11-28 | xarm_bringup |
The xarm_bringup package
The xarm_bringup package
|
|
| 1 | 2024-11-28 | xarm_api |
The xarm_api package
The xarm_api package
|
|
| 1 | 2024-11-28 | xarm7_vacuum_gripper_moveit_config |
An automatically generated package with all the configuration and launch files for using the xarm7_with_vacuum_gripper with the MoveIt! Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the xarm7_with_vacuum_gripper with the MoveIt! Motion Planning Framework
|
|
| 1 | 2024-11-28 | xarm7_redundancy_res |
Example scripts for controlling the my xarm robot.
Example scripts for controlling the my xarm robot.
|
|
| 1 | 2024-11-28 | xarm7_moveit_config |
An automatically generated package with all the configuration and launch files for using the xarm7 with the MoveIt! Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the xarm7 with the MoveIt! Motion Planning Framework
|
|
| 1 | 2024-11-28 | xarm7_gripper_moveit_config |
An automatically generated package with all the configuration and launch files for using the xarm7_with_gripper with the MoveIt! Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the xarm7_with_gripper with the MoveIt! Motion Planning Framework
|
|
| 1 | 2024-11-28 | xarm6_vacuum_gripper_moveit_config |
An automatically generated package with all the configuration and launch files for using the xarm6_with_vacuum_gripper with the MoveIt! Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the xarm6_with_vacuum_gripper with the MoveIt! Motion Planning Framework
|
|
| 1 | 2024-11-28 | xarm6_moveit_config |
An automatically generated package with all the configuration and launch files for using the xarm6 with the MoveIt! Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the xarm6 with the MoveIt! Motion Planning Framework
|
|
| 1 | 2024-11-28 | xarm6_gripper_moveit_config |
An automatically generated package with all the configuration and launch files for using the xarm6_with_gripper with the MoveIt! Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the xarm6_with_gripper with the MoveIt! Motion Planning Framework
|
|
| 1 | 2024-11-28 | xarm5_vacuum_gripper_moveit_config |
An automatically generated package with all the configuration and launch files for using the xarm5_with_vacuum_gripper with the MoveIt! Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the xarm5_with_vacuum_gripper with the MoveIt! Motion Planning Framework
|
|
| 1 | 2024-11-28 | xarm5_moveit_config |
An automatically generated package with all the configuration and launch files for using the xarm5 with the MoveIt! Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the xarm5 with the MoveIt! Motion Planning Framework
|
|
| 1 | 2024-11-28 | xarm5_gripper_moveit_config |
An automatically generated package with all the configuration and launch files for using the xarm5_with_gripper with the MoveIt! Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the xarm5_with_gripper with the MoveIt! Motion Planning Framework
|
|
| 1 | 2024-11-28 | uf_robot_moveit_config |
An automatically generated package with all the configuration and launch files for using the UFACTORY robot with the MoveIt! Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the UFACTORY robot with the MoveIt! Motion Planning Framework
|
|
| 1 | 2024-11-28 | run_recorded_traj |
The run_recorded_traj package
The run_recorded_traj package
|
|
| 1 | 2024-11-28 | multi_xarm5 |
The multi_xarm5 package
The multi_xarm5 package
|
|
| 1 | 2024-11-28 | lite6_moveit_config |
An automatically generated package with all the configuration and launch files for using the lite6 with the MoveIt! Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the lite6 with the MoveIt! Motion Planning Framework
|
|
| 1 | 2024-11-28 | dual_xarm6_moveit_config |
An automatically generated package with all the configuration and launch files for using the xarm6 with the MoveIt! Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the xarm6 with the MoveIt! Motion Planning Framework
|
|
| 1 | 2024-11-28 | d435i_xarm_setup |
The d435i_xarm_setup package
The d435i_xarm_setup package
|
|
| 1 | 2024-11-28 | camera_demo |
The camera_demo package
The camera_demo package
|
|
| 1 | 2024-11-28 | bta_tof_driver |
The BTA ROS driver
The BTA ROS driver
|
|
| 1 | 2024-11-25 | urg_stamped |
Precisely stamped URG driver for ROS
Precisely stamped URG driver for ROS
|
|
| 1 | 2024-11-25 | behaviortree_cpp |
This package provides the Behavior Trees core library.
This package provides the Behavior Trees core library.
|
|
| 1 | 2024-11-18 | multisense_ros |
multisense_ros
multisense_ros
|
|
| 1 | 2024-11-18 | multisense_lib |
multisense_lib
multisense_lib
|
|
| 1 | 2024-11-18 | multisense_description |
multisense_description
multisense_description
|
|
| 1 | 2024-11-18 | multisense_cal_check |
multisense_cal_check
multisense_cal_check
|
|
| 1 | 2024-11-18 | multisense_bringup |
multisense_bringup
multisense_bringup
|
|
| 1 | 2024-11-18 | multisense |
multisense catkin driver
multisense catkin driver
|
|
| 1 | 2024-11-12 | virtual_force_publisher |
publish end effector's force, which is estmated from joint torque value
publish end effector's force, which is estmated from joint torque value
|
|
| 1 | 2024-11-12 | multi_map_server |
multi_map_server provides the
multi_map_server provides the
|
|
| 1 | 2024-11-12 | jsk_topic_tools |
jsk_topic_tools
jsk_topic_tools
|
|
| 1 | 2024-11-12 | jsk_tools |
Includes emacs scripts, ros tool alias generator, and launch doc generator.
Includes emacs scripts, ros tool alias generator, and launch doc generator.
|
|
| 1 | 2024-11-12 | jsk_tilt_laser |
The jsk_tilt_laser package
The jsk_tilt_laser package
|
|
| 1 | 2024-11-12 | jsk_rosbag_tools |
The rosbag tools
The rosbag tools
|
|
| 1 | 2024-11-12 | jsk_network_tools |
jsk_network_tools
jsk_network_tools
|
|
| 1 | 2024-11-12 | jsk_data |
The jsk_data package
The jsk_data package
|
|
| 1 | 2024-11-12 | jsk_common |
|
|
| 1 | 2024-11-12 | image_view2 |
A simple viewer for ROS image topics with draw-on features
A simple viewer for ROS image topics with draw-on features
|
|
| 1 | 2024-11-12 | dynamic_tf_publisher |
dynamically set the tf trensformation
dynamically set the tf trensformation
|
|
| 1 | 2024-11-12 | audio_video_recorder |
ROS package for recording image and audio synchronously
ROS package for recording image and audio synchronously
|
|
| 1 | 2024-11-08 | trajectory_tracker |
Path following control package for wheeled mobile robot
Path following control package for wheeled mobile robot
|
|
| 1 | 2024-11-08 | track_odometry |
Odometry slip compensation package
Odometry slip compensation package
|
|
| 1 | 2024-11-08 | safety_limiter |
Motion limiter package for collision prevention
Motion limiter package for collision prevention
|
|
| 1 | 2024-11-08 | planner_cspace |
3-dof configuration space planner for mobile robot
3-dof configuration space planner for mobile robot
|
|
| 1 | 2024-11-08 | obj_to_pointcloud |
OBJ file to pointcloud message converter package
OBJ file to pointcloud message converter package
|
|
| 1 | 2024-11-08 | neonavigation_launch |
Demonstration and sample launch files for neonavigation meta-package
Demonstration and sample launch files for neonavigation meta-package
|
|
| 1 | 2024-11-08 | neonavigation_common |
Common headers for neonavigation meta-package
Common headers for neonavigation meta-package
|
|
| 1 | 2024-11-08 | neonavigation |
The neonavigation meta-package including 3-dof configuration space planner
The neonavigation meta-package including 3-dof configuration space planner
|
|
| 1 | 2024-11-08 | map_organizer |
Layered costmap organizer package
Layered costmap organizer package
|
|
| 1 | 2024-11-08 | joystick_interrupt |
Interrupt cmd_vel by joystick input
Interrupt cmd_vel by joystick input
|
|
| 1 | 2024-11-08 | costmap_cspace |
3-dof configuration space costmap package
3-dof configuration space costmap package
|
|
| 1 | 2024-10-30 | eigenpy |
Bindings between Numpy and Eigen using Boost.Python
Bindings between Numpy and Eigen using Boost.Python
|
|
| 1 | 2024-10-29 | sound_classification |
The sound_classification package
The sound_classification package
|
|
| 1 | 2024-10-29 | resized_image_transport |
ROS nodes to publish resized images.
ROS nodes to publish resized images.
|
|
| 1 | 2024-10-29 | jsk_recognition_utils |
C++ library about sensor model, geometrical modeling and perception.
C++ library about sensor model, geometrical modeling and perception.
|
|
| 1 | 2024-10-29 | jsk_recognition_msgs |
ROS messages for jsk_pcl_ros and jsk_perception.
ROS messages for jsk_pcl_ros and jsk_perception.
|
|
| 1 | 2024-10-29 | jsk_recognition |
|
|
| 1 | 2024-10-29 | jsk_perception |
ROS nodes and nodelets for 2-D image perception.
ROS nodes and nodelets for 2-D image perception.
|
|
| 1 | 2024-10-29 | jsk_pcl_ros_utils |
ROS utility nodelets for pointcloud perception.
ROS utility nodelets for pointcloud perception.
|
|
| 1 | 2024-10-29 | jsk_pcl_ros |
ROS nodelets for pointcloud perception.
ROS nodelets for pointcloud perception.
|
|
| 1 | 2024-10-29 | imagesift |
For every image, computes its sift features and send a new message with the image, its intrinsic parameters, and the features.
Parameters include:
display - shows the image on the local computer
For every image, computes its sift features and send a new message with the image, its intrinsic parameters, and the features.
Parameters include:
display - shows the image on the local computer
|
|
| 1 | 2024-10-29 | checkerboard_detector |
Uses opencv to find checkboards and compute their 6D poses with respect to the image. Requires the image to be calibrated.
Uses opencv to find checkboards and compute their 6D poses with respect to the image. Requires the image to be calibrated.
|
|
| 1 | 2024-10-29 | audio_to_spectrogram |
Convert audio (audio_common_msgs/AudioData) to spectrogram (sensor_msgs/Image)
Convert audio (audio_common_msgs/AudioData) to spectrogram (sensor_msgs/Image)
|
|
| 1 | 2024-10-28 | python_orocos_kdl |
This package contains the python bindings PyKDL for the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains the python bindings PyKDL for the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 3 | 2024-10-28 | orocos_kdl |
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 1 | 2024-10-28 | ensenso_driver |
Driver for Ensenso stereo cameras.
Driver for Ensenso stereo cameras.
|
|
| 1 | 2024-10-28 | ensenso_description |
Description package for Ensenso stereo cameras. This package consists of all current supported camera models.
The Xacro macros, which import the mesh files as stl, accept the following parameters:
- camera name
- collision margin to the camera
Description package for Ensenso stereo cameras. This package consists of all current supported camera models.
The Xacro macros, which import the mesh files as stl, accept the following parameters:
- camera name
- collision margin to the camera
|
|
| 1 | 2024-10-28 | ensenso_camera_test |
Tests for the ensenso_camera package.
Tests for the ensenso_camera package.
|
|
| 1 | 2024-10-28 | ensenso_camera_msgs |
Message definitions for the ensenso_camera package.
Message definitions for the ensenso_camera package.
|
|
| 1 | 2024-10-28 | ensenso_camera |
Driver for Ensenso stereo cameras.
Driver for Ensenso stereo cameras.
|
|
| 1 | 2024-10-26 | pose_cov_ops |
C++ library for SE(2)/SE(3) pose composition operations with uncertainty
C++ library for SE(2)/SE(3) pose composition operations with uncertainty
|
|
| 1 | 2024-10-24 | rosbag_snapshot_msgs |
Service and message definitions for rosbag_snapshot
Service and message definitions for rosbag_snapshot
|
|
| 1 | 2024-10-24 | rosbag_snapshot |
The rosbag_snapshot package
The rosbag_snapshot package
|
|
| 2 | 2024-10-24 | rc_genicam_driver |
The rc_genicam_driver provides data from a Roboception rc_visard 3D sensor or rc_cube on several ROS topics.
The rc_genicam_driver provides data from a Roboception rc_visard 3D sensor or rc_cube on several ROS topics.
|
|
| 1 | 2024-10-22 | dual_quaternions |
dual quaternion operations
dual quaternion operations
|
|
| 2 | 2024-10-18 | variant_topic_tools |
Topic tools for treating messages as variant types.
Topic tools for treating messages as variant types.
|
|
| 2 | 2024-10-18 | variant_msgs |
Variant messages are designed to accommodate the information content of any invariant message. They are truly generic and can freely be converted to and from specific message objects.
Variant messages are designed to accommodate the information content of any invariant message. They are truly generic and can freely be converted to and from specific message objects.
|
|
| 2 | 2024-10-18 | variant |
Meta-package for the universal variant library.
Meta-package for the universal variant library.
|
|
| 2 | 2024-10-18 | rqt_multiplot |
rqt_multiplot provides a GUI plugin for visualizing numeric values in multiple 2D plots using the Qwt plotting backend.
rqt_multiplot provides a GUI plugin for visualizing numeric values in multiple 2D plots using the Qwt plotting backend.
|
|
| 3 | 2024-10-18 | grid_map_visualization |
Configurable tool to visualize grid maps in RViz.
Configurable tool to visualize grid maps in RViz.
|
|
| 3 | 2024-10-18 | grid_map_sdf |
Generates signed distance fields from grid maps.
Generates signed distance fields from grid maps.
|
|
| 3 | 2024-10-18 | grid_map_rviz_plugin |
RViz plugin for displaying grid map messages.
RViz plugin for displaying grid map messages.
|
|
| 3 | 2024-10-18 | grid_map_ros |
ROS interface for the grid map library to manage two-dimensional grid maps with multiple data layers.
ROS interface for the grid map library to manage two-dimensional grid maps with multiple data layers.
|
|
| 3 | 2024-10-18 | grid_map_pcl |
Conversions between grid maps and Point Cloud Library (PCL) types.
Conversions between grid maps and Point Cloud Library (PCL) types.
|
|
| 3 | 2024-10-18 | grid_map_octomap |
Conversions between grid maps and OctoMap types.
Conversions between grid maps and OctoMap types.
|
|
| 3 | 2024-10-18 | grid_map_msgs |
Definition of the multi-layered grid map message type.
Definition of the multi-layered grid map message type.
|
|
| 3 | 2024-10-18 | grid_map_loader |
Loading and publishing grid maps from bag files.
Loading and publishing grid maps from bag files.
|
|
| 3 | 2024-10-18 | grid_map_filters |
Processing grid maps as a sequence of ROS filters.
Processing grid maps as a sequence of ROS filters.
|
|
| 3 | 2024-10-18 | grid_map_demos |
Demo nodes to demonstrate the usage of the grid map library.
Demo nodes to demonstrate the usage of the grid map library.
|
|
| 3 | 2024-10-18 | grid_map_cv |
Conversions between grid maps and OpenCV images.
Conversions between grid maps and OpenCV images.
|
|
| 3 | 2024-10-18 | grid_map_costmap_2d |
Interface for grid maps to the costmap_2d format.
Interface for grid maps to the costmap_2d format.
|
|
| 3 | 2024-10-18 | grid_map_core |
Universal grid map library to manage two-dimensional grid maps with multiple data layers.
Universal grid map library to manage two-dimensional grid maps with multiple data layers.
|
|
| 3 | 2024-10-18 | grid_map |
Meta-package for the universal grid map library.
Meta-package for the universal grid map library.
|
|
| 1 | 2024-10-15 | zivid_samples |
Contains C++ and Python samples demonstrating use of the zivid_camera package.
Contains C++ and Python samples demonstrating use of the zivid_camera package.
|
|
| 1 | 2024-10-15 | zivid_interfaces |
Zivid interfaces
Zivid interfaces
|
|
| 1 | 2024-10-15 | zivid_camera |
Driver for using the Zivid 3D cameras in ROS 2.
Driver for using the Zivid 3D cameras in ROS 2.
|
|
| 1 | 2024-10-15 | mcl_3dl |
3-D/6-DOF localization for mobile robots with 3-D LIDAR(s)
3-D/6-DOF localization for mobile robots with 3-D LIDAR(s)
|
|
| 1 | 2024-10-13 | warehouse_ros |
Persistent storage of ROS messages
Persistent storage of ROS messages
|
|
| 1 | 2024-10-13 | random_numbers |
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
|
|
| 1 | 2024-10-13 | agni_tf_tools |
This package provides a gui program as well as a rviz plugin to publish static transforms.
Both support the transformation between various Euler angle representations.
The rviz plugin also allows to configure the transform with an interactive marker.
This package provides a gui program as well as a rviz plugin to publish static transforms.
Both support the transformation between various Euler angle representations.
The rviz plugin also allows to configure the transform with an interactive marker.
|
|
| 1 | 2024-10-10 | test_mavros |
Tests for MAVROS package
Tests for MAVROS package
|
|
| 2 | 2024-10-10 | robot_self_filter |
Filters the robot's body out of point clouds.
Filters the robot's body out of point clouds.
|
|
| 1 | 2024-10-10 | mavros_msgs |
mavros_msgs defines messages for
mavros_msgs defines messages for
|
|
| 1 | 2024-10-10 | mavros_extras |
Extra nodes and plugins for
Extra nodes and plugins for
|
|
| 1 | 2024-10-10 | mavros |
MAVROS -- MAVLink extendable communication node for ROS
with proxy for Ground Control Station.
MAVROS -- MAVLink extendable communication node for ROS
with proxy for Ground Control Station.
|
|
| 1 | 2024-10-10 | libmavconn |
MAVLink communication library.
This library provide unified connection handling classes
and URL to connection object mapper.
This library can be used in standalone programs.
MAVLink communication library.
This library provide unified connection handling classes
and URL to connection object mapper.
This library can be used in standalone programs.
|
|
| 2 | 2024-10-09 | sbg_driver |
ROS driver package for communication with the SBG navigation systems.
ROS driver package for communication with the SBG navigation systems.
|
|
| 1 | 2024-10-09 | mrpt_msgs |
ROS messages for MRPT classes and objects
ROS messages for MRPT classes and objects
|
|
| 1 | 2024-10-08 | trac_ik_python |
The trac_ik_python package contains a python wrapper using SWIG
for trac_ik_lib
The trac_ik_python package contains a python wrapper using SWIG
for trac_ik_lib
|
|
| 1 | 2024-10-08 | trac_ik_lib |
TRAC-IK is a faster, significantly more reliable drop-in replacement for
KDL's pseudoinverse Jacobian solver.
The TRAC-IK library has a very similar API to KDL's IK solver calls,
except that the user passes a maximum time instead of a maximum number of
search iterations. Additionally, TRAC-IK allows for error tolerances to
be set independently for each Cartesian dimension (x,y,z,roll,pitch.yaw).
TRAC-IK is a faster, significantly more reliable drop-in replacement for
KDL's pseudoinverse Jacobian solver.
The TRAC-IK library has a very similar API to KDL's IK solver calls,
except that the user passes a maximum time instead of a maximum number of
search iterations. Additionally, TRAC-IK allows for error tolerances to
be set independently for each Cartesian dimension (x,y,z,roll,pitch.yaw).
|
|
| 1 | 2024-10-08 | trac_ik_kinematics_plugin |
A MoveIt! Kinematics plugin using TRAC-IK
A MoveIt! Kinematics plugin using TRAC-IK
|
|
| 1 | 2024-10-08 | trac_ik_examples |
This package contains the source code for testing and comparing trac_ik
This package contains the source code for testing and comparing trac_ik
|
|
| 1 | 2024-10-08 | trac_ik |
The ROS packages in this repository were created to provide an improved
alternative Inverse Kinematics solver to the popular inverse Jacobian
methods in KDL. TRAC-IK handles joint-limited chains better than KDL
without increasing solve time.
The ROS packages in this repository were created to provide an improved
alternative Inverse Kinematics solver to the popular inverse Jacobian
methods in KDL. TRAC-IK handles joint-limited chains better than KDL
without increasing solve time.
|
|
| 1 | 2024-10-08 | industrial_ci |
This package contains CI (Continuous Integration) configuration that any ROS-powered packages can commonly use. Some notable feature:
This package contains CI (Continuous Integration) configuration that any ROS-powered packages can commonly use. Some notable feature:
|
|
| 1 | 2024-10-01 | tf_tools |
ROS tools and scripts relates to tf
ROS tools and scripts relates to tf
|
|
| 1 | 2024-10-01 | srv_tools |
Stack with interesting ROS tools
Stack with interesting ROS tools
|
|
| 1 | 2024-10-01 | pointcloud_tools |
pointcloud_tools
pointcloud_tools
|
|
| 1 | 2024-10-01 | plot_tools |
plot_tools
plot_tools
|
|
| 1 | 2024-10-01 | launch_tools |
ROS tools and scripts related to launchfiles
ROS tools and scripts related to launchfiles
|
|
| 1 | 2024-10-01 | bag_tools |
ROS tools and scripts related to bagfiles
ROS tools and scripts related to bagfiles
|
|
| 2 | 2024-09-24 | pr2_run_stop_auto_restart |
This package provides a node that monitors the state of the run stops of the pr2_robot. When the state of the
run stop changes from off to on, this node will automatically enable the power to the motors, and reset
the motors. This allows you to use the run stop as a 'pause' button. By using the run stop as a tool to
power up the robot, the run stop is also in reach of the user once the robot starts moving.
This package provides a node that monitors the state of the run stops of the pr2_robot. When the state of the
run stop changes from off to on, this node will automatically enable the power to the motors, and reset
the motors. This allows you to use the run stop as a 'pause' button. By using the run stop as a tool to
power up the robot, the run stop is also in reach of the user once the robot starts moving.
|
|
| 2 | 2024-09-24 | pr2_robot |
This stack collects PR2-specific components that are used in bringing up
a robot.
This stack collects PR2-specific components that are used in bringing up
a robot.
|
|
| 2 | 2024-09-24 | pr2_ethercat |
Main loop that runs the robot.
Main loop that runs the robot.
|
|
| 2 | 2024-09-24 | pr2_controller_configuration |
Configuration files for PR2 controllers.
Configuration files for PR2 controllers.
|
|
| 2 | 2024-09-24 | pr2_computer_monitor |
Monitors the computer's processor and hard drives of the PR2 and publishes data to diagnostics.
Monitors the computer's processor and hard drives of the PR2 and publishes data to diagnostics.
|
|
| 2 | 2024-09-24 | pr2_camera_synchronizer |
|
|
| 2 | 2024-09-24 | pr2_bringup |
Launch files and scripts needed to bring a PR2 up into a running state.
Launch files and scripts needed to bring a PR2 up into a running state.
|
|
| 2 | 2024-09-24 | imu_monitor |
This package contains a single node that monitors the drift of the IMU
gyroscopes. The results are published to the '/diagnostics' topic and
are aggregated in the PR2 dashboard.
This package contains a single node that monitors the drift of the IMU
gyroscopes. The results are published to the '/diagnostics' topic and
are aggregated in the PR2 dashboard.
|
|
| 1 | 2024-09-22 | abb_irb7600_support |
|
|
| 1 | 2024-09-22 | abb_irb6700_support |
|
|
| 1 | 2024-09-22 | abb_irb6650s_support |
|
|
| 1 | 2024-09-22 | abb_irb52_support |
|
|
| 1 | 2024-09-22 | abb_irb4600_support |
|
|
| 1 | 2024-09-22 | abb_irb2600_support |
|
|
| 1 | 2024-09-22 | abb_irb1600_support |
|
|
| 1 | 2024-09-22 | abb_irb1600_6_12_moveit_config |
|
|
| 1 | 2024-09-22 | abb_irb120t_moveit_config |
|
|
| 1 | 2024-09-22 | abb_irb120_support |
|
|
| 1 | 2024-09-22 | abb_irb120_moveit_config |
|
|
| 1 | 2024-09-22 | abb_irb120_gazebo |
|
|
| 1 | 2024-09-22 | abb_irb1200_support |
|
|
| 1 | 2024-09-22 | abb_irb1200_gazebo |
|
|
| 1 | 2024-09-22 | abb_irb1200_7_70_moveit_config |
|
|
| 1 | 2024-09-22 | abb_irb1200_5_90_moveit_config |
|
|
| 1 | 2024-09-22 | abb_experimental |
Experimental packages for ABB manipulators within ROS-Industrial.
Experimental packages for ABB manipulators within ROS-Industrial.
|
|
| 1 | 2024-09-22 | abb_crb15000_support |
|
|
| 1 | 2024-09-20 | costmap_converter |
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
|
|
| 1 | 2024-09-06 | tile_map |
Tile map provides a slippy map style interface for visualizing
OpenStreetMap and GooleMap tiles. A mapviz visualization plug-in is also
implemented
Tile map provides a slippy map style interface for visualizing
OpenStreetMap and GooleMap tiles. A mapviz visualization plug-in is also
implemented
|
|
| 1 | 2024-09-06 | multires_image |
multires_image
multires_image
|
|
| 1 | 2024-09-06 | mapviz_plugins |
Common plugins for the Mapviz visualization tool
Common plugins for the Mapviz visualization tool
|
|
| 1 | 2024-09-06 | mapviz |
mapviz
mapviz
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_support |
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
Mechanical, kinematic and visual description
of the Pilz light weight arm PRBT.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_pg70_support |
PRBT support for Schunk pg70 gripper.
PRBT support for Schunk pg70 gripper.
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_moveit_config |
|
|
| 2 | 2024-08-29 | moveit_resources_prbt_ikfast_manipulator_plugin |
The prbt_ikfast_manipulator_plugin package
The prbt_ikfast_manipulator_plugin package
|
|
| 1 | 2024-08-29 | moveit_resources_pr2_description |
PR2 Resources used for MoveIt! testing
PR2 Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_panda_moveit_config |
|
|
| 1 | 2024-08-29 | moveit_resources_panda_description |
panda Resources used for MoveIt! testing
panda Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_fanuc_moveit_config |
|
|
| 1 | 2024-08-29 | moveit_resources_fanuc_description |
Fanuc Resources used for MoveIt! testing
Fanuc Resources used for MoveIt! testing
|
|
| 1 | 2024-08-29 | moveit_resources_dual_panda_moveit_config |
An automatically generated package with all the configuration and launch files for using the panda with the MoveIt Motion Planning Framework
An automatically generated package with all the configuration and launch files for using the panda with the MoveIt Motion Planning Framework
|
|
| 1 | 2024-08-29 | moveit_resources |
Resources used for MoveIt! testing
Resources used for MoveIt! testing
|
|
| 1 | 2024-08-13 | sound_play |
sound_play provides a ROS node that translates commands on a ROS topic (
sound_play provides a ROS node that translates commands on a ROS topic (
|
|
| 1 | 2024-08-13 | audio_play |
Outputs audio to a speaker from a source node.
Outputs audio to a speaker from a source node.
|
|
| 1 | 2024-08-13 | audio_common_msgs |
Messages for transmitting audio via ROS
Messages for transmitting audio via ROS
|
|
| 1 | 2024-08-13 | audio_common |
Common code for working with audio in ROS
Common code for working with audio in ROS
|
|
| 1 | 2024-08-13 | audio_capture |
Transports audio from a source to a destination. Audio sources can come
from a microphone or file. The destination can play the audio or save it
to an mp3 file.
Transports audio from a source to a destination. Audio sources can come
from a microphone or file. The destination can play the audio or save it
to an mp3 file.
|
|
| 1 | 2024-08-06 | pr2_tuck_arms_action |
The pr2_tuck_arms_action package
The pr2_tuck_arms_action package
|
|
| 1 | 2024-08-06 | pr2_tilt_laser_interface |
Provides a set of tools/actions for manipulating the pr2's tilting
laser. Simplifies previously complex tasks, such as fetching
a single sweep, given a set of desired parameters for both the laser
driver and tilting platform.
Provides a set of tools/actions for manipulating the pr2's tilting
laser. Simplifies previously complex tasks, such as fetching
a single sweep, given a set of desired parameters for both the laser
driver and tilting platform.
|
|
| 1 | 2024-08-06 | pr2_gripper_sensor_msgs |
The pr2_gripper_sensor_msgs package contains various actions and messages that are used in the pr2_gripper_sensor* packages. The structure of the API used by pr2_gripper_sensor_action, and pr2_gripper_sensor_controller packages is as follows:
Users will send a goal to an Action in the message format of PR2Gripper*Command (where * replaces the name of the particular Action from pr2_gripper_sensor_action). Feedback and Result information for the action is then returned in the format of PR2Gripper*Data.
The pr2_gripper_sensor_msgs package contains various actions and messages that are used in the pr2_gripper_sensor* packages. The structure of the API used by pr2_gripper_sensor_action, and pr2_gripper_sensor_controller packages is as follows:
Users will send a goal to an Action in the message format of PR2Gripper*Command (where * replaces the name of the particular Action from pr2_gripper_sensor_action). Feedback and Result information for the action is then returned in the format of PR2Gripper*Data.
|
|
| 1 | 2024-08-06 | pr2_gripper_sensor_controller |
The pr2_gripper_sensor_controller package is a real-time controller that integrates signals from the PR2 hand-mounted accelerometer and finger-mounted pressure sensors with motor control of the gripper joint to do highly responsive sensing and low-latency closed-loop control.
The pr2_gripper_sensor_controller package is a real-time controller that integrates signals from the PR2 hand-mounted accelerometer and finger-mounted pressure sensors with motor control of the gripper joint to do highly responsive sensing and low-latency closed-loop control.
|
|
| 1 | 2024-08-06 | pr2_gripper_sensor_action |
The pr2_gripper_sensor_action package provides an action interface for talking to the pr2_gripper_sensor_controller real-time controller.
It provides several different actions for getting high-level sensor information from the PR2 palm-mounted accelerometers, fingertip pressure arrays, and gripper motor/encoder, as well as several sensor-based gripper control actions that respond with low-latency in real-time.
The pr2_gripper_sensor_action package provides an action interface for talking to the pr2_gripper_sensor_controller real-time controller.
It provides several different actions for getting high-level sensor information from the PR2 palm-mounted accelerometers, fingertip pressure arrays, and gripper motor/encoder, as well as several sensor-based gripper control actions that respond with low-latency in real-time.
|
|
| 1 | 2024-08-06 | pr2_gripper_sensor |
The pr2_gripper_sensor package
The pr2_gripper_sensor package
|
|
| 1 | 2024-08-06 | pr2_common_actions |
Various actions which help in moving the arms of the PR2
or getting data from its tilting laser.
Various actions which help in moving the arms of the PR2
or getting data from its tilting laser.
|
|
| 1 | 2024-08-06 | pr2_common_action_msgs |
The pr2_common_action_msgs package
The pr2_common_action_msgs package
|
|
| 1 | 2024-08-06 | pr2_arm_move_ik |
Move the pr2 arm using inverse kinematics
Move the pr2 arm using inverse kinematics
|
|
| 1 | 2024-08-06 | joint_trajectory_generator |
joint_trajectory_generator action takes in a trajectory specified
by a number of joint positions, and it generates a new smooth trajectory
through these joint positions.
joint_trajectory_generator action takes in a trajectory specified
by a number of joint positions, and it generates a new smooth trajectory
through these joint positions.
|
|
| 1 | 2024-08-06 | joint_trajectory_action_tools |
joint_trajectory_action_tools
joint_trajectory_action_tools
|
|
| 2 | 2024-07-31 | webots_ros |
The ROS package containing examples for interfacing ROS with the standard ROS controller of Webots
The ROS package containing examples for interfacing ROS with the standard ROS controller of Webots
|
|
| 1 | 2024-07-30 | rcdiscover |
This package contains tools for the discovery of Roboception devices via GigE Vision.
This package contains tools for the discovery of Roboception devices via GigE Vision.
|
|
| 1 | 2024-07-25 | rqt_pr2_dashboard |
rqt_pr2_dashboard is a GUI for debugging and controlling low-level state of the PR2. It shows things like battery status and breaker states, as well as integrating tools like rqt_console and robot_monitor.
rqt_pr2_dashboard is a GUI for debugging and controlling low-level state of the PR2. It shows things like battery status and breaker states, as well as integrating tools like rqt_console and robot_monitor.
|
Packages
| Name | Description | |||
|---|---|---|---|---|
| 2 | 2024-12-04 | mvsim |
A lightweight multivehicle simulation framework.
A lightweight multivehicle simulation framework.
|
|
| 1 | 2024-12-04 | eiquadprog |
Eiquadprog a QP solver using active sets
Eiquadprog a QP solver using active sets
|
|
| 1 | 2024-12-04 | coal |
An extension of the Flexible Collision Library.
An extension of the Flexible Collision Library.
|
|
| 1 | 2024-12-03 | ros_industrial_cmake_boilerplate |
Contains boilerplate cmake script, macros and utils
Contains boilerplate cmake script, macros and utils
|
|
| 1 | 2024-12-03 | pinocchio |
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
A fast and flexible implementation of Rigid Body Dynamics algorithms and their analytical derivatives.
|
|
| 1 | 2024-12-02 | tf2_2d |
A set of 2D geometry classes modeled after the 3D geometry classes in tf2.
A set of 2D geometry classes modeled after the 3D geometry classes in tf2.
|
|
| 1 | 2024-12-02 | test_catkin_virtualenv_inherited |
Test to make sure a package inherits it's dependency's dependencies, but is able to override the version.
Test to make sure a package inherits it's dependency's dependencies, but is able to override the version.
|
|
| 1 | 2024-12-02 | test_catkin_virtualenv |
Basic catkin_virtualenv test.
Basic catkin_virtualenv test.
|
|
| 1 | 2024-12-02 | rc_genicam_api |
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
GenICam/GigE Vision Convenience Layer.
This package combines the Roboception convenience layer for images with the
GenICam reference implementation and a GigE Vision transport layer. It is a
self contained package that permits configuration and image streaming of
GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard.
This package also provides some tools that can be called from the command line
for discovering cameras, changing their configuration and streaming images.
Although the tools are meant to be useful when working in a shell or in a
script, their main purpose is to serve as example on how to use the API for
reading and setting parameters, streaming and synchronizing images.
See LICENSE.md for licensing terms of the different parts.
|
|
| 1 | 2024-12-02 | json_transport |
JSON transport for ROS
JSON transport for ROS
|
|
| 1 | 2024-12-02 | json_msgs |
JSON ROS message
JSON ROS message
|
|
| 1 | 2024-12-02 | gtsam |
gtsam
gtsam
|
|
| 1 | 2024-12-02 | catkin_virtualenv |
Bundle python requirements in a catkin package via virtualenv.
Bundle python requirements in a catkin package via virtualenv.
|
|
| 1 | 2024-11-29 | uos_tools |
Various helper utilities not associated with a particular stack
Various helper utilities not associated with a particular stack
|
|
| 1 | 2024-11-29 | uos_maps |
Navigation maps of the Osnabrueck University
Navigation maps of the Osnabrueck University
|
|
| 1 | 2024-11-29 | uos_gazebo_worlds |
Gazebo world and model files for UOS.
Gazebo world and model files for UOS.
|
|
| 1 | 2024-11-29 | uos_freespace |
uos_freespace package
uos_freespace package
|
|
| 1 | 2024-11-29 | uos_diffdrive_teleop |
uos_diffdrive_teleop
uos_diffdrive_teleop
|
|
| 1 | 2024-11-29 | uos_common_urdf |
This package contains URDF descriptions of the UOS robots.
This package contains URDF descriptions of the UOS robots.
|
|
| 1 | 2024-11-28 | innopolis_vtol_dynamics |
The innopolis_vtol_dynamics package
The innopolis_vtol_dynamics package
|
|
| 1 | 2024-11-28 | bta_tof_driver |
The BTA ROS driver
The BTA ROS driver
|
|
| 1 | 2024-11-26 | foxglove_msgs |
foxglove_msgs provides visualization messages that are supported by Foxglove.
foxglove_msgs provides visualization messages that are supported by Foxglove.
|
|
| 1 | 2024-11-26 | foxglove_bridge |
ROS Foxglove Bridge
ROS Foxglove Bridge
|
|
| 3 | 2024-11-26 | apriltag |
AprilTag detector library
AprilTag detector library
|
|
| 1 | 2024-11-25 | urg_stamped |
Precisely stamped URG driver for ROS
Precisely stamped URG driver for ROS
|
|
| 1 | 2024-11-25 | ur_client_library |
Standalone C++ library for accessing Universal Robots interfaces. This has been forked off the ur_robot_driver.
Standalone C++ library for accessing Universal Robots interfaces. This has been forked off the ur_robot_driver.
|
|
| 1 | 2024-11-25 | fuse_viz |
The fuse_viz package provides visualization tools for fuse.
The fuse_viz package provides visualization tools for fuse.
|
|
| 1 | 2024-11-25 | fuse_variables |
The fuse_variables package provides a set of commonly used variable types, such as 2D and 3D positions,
orientations, velocities, and accelerations.
The fuse_variables package provides a set of commonly used variable types, such as 2D and 3D positions,
orientations, velocities, and accelerations.
|
|
| 1 | 2024-11-25 | fuse_tutorials |
Package containing source code for the fuse tutorials
Package containing source code for the fuse tutorials
|
|
| 1 | 2024-11-25 | fuse_publishers |
The fuse_publishers package provides a set of common publisher plugins.
The fuse_publishers package provides a set of common publisher plugins.
|
|
| 1 | 2024-11-25 | fuse_optimizers |
The fuse_optimizers package provides a set of optimizer implementations. An optimizer is the object responsible
for coordinating the sensors and motion model inputs, computing the optimal state values, and providing access to
to the optimal state via the publishers.
The fuse_optimizers package provides a set of optimizer implementations. An optimizer is the object responsible
for coordinating the sensors and motion model inputs, computing the optimal state values, and providing access to
to the optimal state via the publishers.
|
|
| 1 | 2024-11-25 | fuse_msgs |
The fuse_msgs package contains messages capable of holding serialized fuse objects
The fuse_msgs package contains messages capable of holding serialized fuse objects
|
|
| 1 | 2024-11-25 | fuse_models |
fuse plugins that implement various kinematic and sensor models
fuse plugins that implement various kinematic and sensor models
|
|
| 1 | 2024-11-25 | fuse_loss |
The fuse_loss package provides a set of commonly used loss functions, such as the basic ones provided by Ceres.
The fuse_loss package provides a set of commonly used loss functions, such as the basic ones provided by Ceres.
|
|
| 1 | 2024-11-25 | fuse_graphs |
The fuse_graphs package provides some concrete implementations of the fuse_core::Graph interface.
The fuse_graphs package provides some concrete implementations of the fuse_core::Graph interface.
|
|
| 1 | 2024-11-25 | fuse_doc |
The fuse_doc package provides documentation and examples for the fuse package.
The fuse_doc package provides documentation and examples for the fuse package.
|
|
| 1 | 2024-11-25 | fuse_core |
The fuse_core package provides the base class interfaces for the various fuse components. Concrete implementations of these
interfaces are provided in other packages.
The fuse_core package provides the base class interfaces for the various fuse components. Concrete implementations of these
interfaces are provided in other packages.
|
|
| 1 | 2024-11-25 | fuse_constraints |
The fuse_constraints package provides a set of commonly used constraint types, such as direct measurements on
state variables (absolute constraints) or measurements of the state changes (relative constraints).
The fuse_constraints package provides a set of commonly used constraint types, such as direct measurements on
state variables (absolute constraints) or measurements of the state changes (relative constraints).
|
|
| 1 | 2024-11-25 | fuse |
The fuse metapackage
The fuse metapackage
|
|
| 1 | 2024-11-24 | tf_static_publisher |
The tf_static_publisher package provides simple static transform publisher
node which allows to send multiple (latched) static transforms from
single node in single message.
The tf_static_publisher package provides simple static transform publisher
node which allows to send multiple (latched) static transforms from
single node in single message.
|
|
| 1 | 2024-11-24 | plotjuggler |
PlotJuggler: juggle with data
PlotJuggler: juggle with data
|
|
| 1 | 2024-11-24 | image_transport_codecs |
Image transport plugins available as C, C++ and Python libraries
Image transport plugins available as C, C++ and Python libraries
|
|
| 1 | 2024-11-24 | cras_topic_tools |
Nodes and nodeletes for safe and efficient manipulation with topics
Nodes and nodeletes for safe and efficient manipulation with topics
|
|
| 1 | 2024-11-24 | cras_py_common |
A Czech-army knife for ROS code written in Python.
A Czech-army knife for ROS code written in Python.
|
|
| 1 | 2024-11-24 | cras_docs_common |
Common configuration for CRAS packages documentation.
Common configuration for CRAS packages documentation.
|
|
| 1 | 2024-11-24 | cras_cpp_common |
A Czech-army knife for ROS code written in C++.
A Czech-army knife for ROS code written in C++.
|
|
| 1 | 2024-11-24 | cras_bag_tools |
Various utilities to work with bag files
Various utilities to work with bag files
|
|
| 1 | 2024-11-24 | camera_throttle |
Utilities for throttling cameras
Utilities for throttling cameras
|
|
| 1 | 2024-11-23 | uavcan_communicator |
The uavcan_communicator package
The uavcan_communicator package
|
|
| 1 | 2024-11-21 | tsid |
Efficient Task Space Inverse Dynamics (TSID) based on Pinocchio
Efficient Task Space Inverse Dynamics (TSID) based on Pinocchio
|
|
| 2 | 2024-11-20 | rc_reason_msgs |
Msg and srv definitions for rc_reason_clients
Msg and srv definitions for rc_reason_clients
|
|
| 2 | 2024-11-20 | rc_reason_clients |
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
Clients for interfacing with Roboception reason modules on rc_visard and rc_cube.
|
|
| 1 | 2024-11-18 | multisense_ros |
multisense_ros
multisense_ros
|
|
| 1 | 2024-11-18 | multisense_lib |
multisense_lib
multisense_lib
|
|
| 1 | 2024-11-18 | multisense_description |
multisense_description
multisense_description
|
|
| 1 | 2024-11-18 | multisense_cal_check |
multisense_cal_check
multisense_cal_check
|
|
| 1 | 2024-11-18 | multisense_bringup |
multisense_bringup
multisense_bringup
|
|
| 1 | 2024-11-18 | multisense |
multisense catkin driver
multisense catkin driver
|
|
| 2 | 2024-11-18 | end_effector |
End-Effector package: provides a ROS-based set of standard interfaces to command robotics end-effectors in an agnostic fashion
End-Effector package: provides a ROS-based set of standard interfaces to command robotics end-effectors in an agnostic fashion
|
|
| 1 | 2024-11-15 | mocap_nokov |
Streaming of Nokov mocap data to tf
Streaming of Nokov mocap data to tf
|
|
| 1 | 2024-11-12 | virtual_force_publisher |
publish end effector's force, which is estmated from joint torque value
publish end effector's force, which is estmated from joint torque value
|
|
| 1 | 2024-11-12 | multi_map_server |
multi_map_server provides the
multi_map_server provides the
|
|
| 1 | 2024-11-12 | jsk_topic_tools |
jsk_topic_tools
jsk_topic_tools
|
|
| 1 | 2024-11-12 | jsk_tools |
Includes emacs scripts, ros tool alias generator, and launch doc generator.
Includes emacs scripts, ros tool alias generator, and launch doc generator.
|
|
| 1 | 2024-11-12 | jsk_tilt_laser |
The jsk_tilt_laser package
The jsk_tilt_laser package
|
|
| 1 | 2024-11-12 | jsk_rosbag_tools |
The rosbag tools
The rosbag tools
|
|
| 1 | 2024-11-12 | jsk_network_tools |
jsk_network_tools
jsk_network_tools
|
|
| 1 | 2024-11-12 | jsk_data |
The jsk_data package
The jsk_data package
|
|
| 1 | 2024-11-12 | jsk_common |
|
|
| 1 | 2024-11-12 | image_view2 |
A simple viewer for ROS image topics with draw-on features
A simple viewer for ROS image topics with draw-on features
|
|
| 1 | 2024-11-12 | dynamic_tf_publisher |
dynamically set the tf trensformation
dynamically set the tf trensformation
|
|
| 1 | 2024-11-12 | audio_video_recorder |
ROS package for recording image and audio synchronously
ROS package for recording image and audio synchronously
|
|
| 1 | 2024-11-08 | trajectory_tracker |
Path following control package for wheeled mobile robot
Path following control package for wheeled mobile robot
|
|
| 1 | 2024-11-08 | track_odometry |
Odometry slip compensation package
Odometry slip compensation package
|
|
| 1 | 2024-11-08 | safety_limiter |
Motion limiter package for collision prevention
Motion limiter package for collision prevention
|
|
| 1 | 2024-11-08 | planner_cspace |
3-dof configuration space planner for mobile robot
3-dof configuration space planner for mobile robot
|
|
| 1 | 2024-11-08 | obj_to_pointcloud |
OBJ file to pointcloud message converter package
OBJ file to pointcloud message converter package
|
|
| 1 | 2024-11-08 | neonavigation_launch |
Demonstration and sample launch files for neonavigation meta-package
Demonstration and sample launch files for neonavigation meta-package
|
|
| 1 | 2024-11-08 | neonavigation_common |
Common headers for neonavigation meta-package
Common headers for neonavigation meta-package
|
|
| 1 | 2024-11-08 | neonavigation |
The neonavigation meta-package including 3-dof configuration space planner
The neonavigation meta-package including 3-dof configuration space planner
|
|
| 1 | 2024-11-08 | map_organizer |
Layered costmap organizer package
Layered costmap organizer package
|
|
| 1 | 2024-11-08 | joystick_interrupt |
Interrupt cmd_vel by joystick input
Interrupt cmd_vel by joystick input
|
|
| 1 | 2024-11-08 | costmap_cspace |
3-dof configuration space costmap package
3-dof configuration space costmap package
|
|
| 1 | 2024-11-07 | microstrain_inertial_rqt |
The microstrain_inertial_rqt package provides several RQT widgets to view the status of Microstrain devices
The microstrain_inertial_rqt package provides several RQT widgets to view the status of Microstrain devices
|
|
| 1 | 2024-11-07 | microstrain_inertial_msgs |
A package that contains ROS message corresponding to microstrain message types.
A package that contains ROS message corresponding to microstrain message types.
|
|
| 1 | 2024-11-07 | microstrain_inertial_examples |
Simple examples using the microstrain_inertial_driver for MicroStrain sensors.
Simple examples using the microstrain_inertial_driver for MicroStrain sensors.
|
|
| 1 | 2024-11-07 | microstrain_inertial_driver |
The ros_mscl package provides a driver for the LORD/Microstrain inertial products.
The ros_mscl package provides a driver for the LORD/Microstrain inertial products.
|
|
| 1 | 2024-11-07 | microstrain_inertial_description |
URDF and stl files for MicroStrain sensors.
URDF and stl files for MicroStrain sensors.
|
|
| 1 | 2024-10-30 | eigenpy |
Bindings between Numpy and Eigen using Boost.Python
Bindings between Numpy and Eigen using Boost.Python
|
|
| 1 | 2024-10-29 | sound_classification |
The sound_classification package
The sound_classification package
|
|
| 1 | 2024-10-29 | resized_image_transport |
ROS nodes to publish resized images.
ROS nodes to publish resized images.
|
|
| 1 | 2024-10-29 | jsk_recognition_utils |
C++ library about sensor model, geometrical modeling and perception.
C++ library about sensor model, geometrical modeling and perception.
|
|
| 1 | 2024-10-29 | jsk_recognition_msgs |
ROS messages for jsk_pcl_ros and jsk_perception.
ROS messages for jsk_pcl_ros and jsk_perception.
|
|
| 1 | 2024-10-29 | jsk_recognition |
|
|
| 1 | 2024-10-29 | jsk_perception |
ROS nodes and nodelets for 2-D image perception.
ROS nodes and nodelets for 2-D image perception.
|
|
| 1 | 2024-10-29 | jsk_pcl_ros_utils |
ROS utility nodelets for pointcloud perception.
ROS utility nodelets for pointcloud perception.
|
|
| 1 | 2024-10-29 | jsk_pcl_ros |
ROS nodelets for pointcloud perception.
ROS nodelets for pointcloud perception.
|
|
| 1 | 2024-10-29 | imagesift |
For every image, computes its sift features and send a new message with the image, its intrinsic parameters, and the features.
Parameters include:
display - shows the image on the local computer
For every image, computes its sift features and send a new message with the image, its intrinsic parameters, and the features.
Parameters include:
display - shows the image on the local computer
|
|
| 1 | 2024-10-29 | checkerboard_detector |
Uses opencv to find checkboards and compute their 6D poses with respect to the image. Requires the image to be calibrated.
Uses opencv to find checkboards and compute their 6D poses with respect to the image. Requires the image to be calibrated.
|
|
| 1 | 2024-10-29 | audio_to_spectrogram |
Convert audio (audio_common_msgs/AudioData) to spectrogram (sensor_msgs/Image)
Convert audio (audio_common_msgs/AudioData) to spectrogram (sensor_msgs/Image)
|
|
| 1 | 2024-10-28 | python_orocos_kdl |
This package contains the python bindings PyKDL for the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains the python bindings PyKDL for the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 3 | 2024-10-28 | orocos_kdl |
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
This package contains a recent version of the Kinematics and Dynamics
Library (KDL), distributed by the Orocos Project.
|
|
| 1 | 2024-10-28 | ensenso_driver |
Driver for Ensenso stereo cameras.
Driver for Ensenso stereo cameras.
|
|
| 1 | 2024-10-28 | ensenso_description |
Description package for Ensenso stereo cameras. This package consists of all current supported camera models.
The Xacro macros, which import the mesh files as stl, accept the following parameters:
- camera name
- collision margin to the camera
Description package for Ensenso stereo cameras. This package consists of all current supported camera models.
The Xacro macros, which import the mesh files as stl, accept the following parameters:
- camera name
- collision margin to the camera
|
|
| 1 | 2024-10-28 | ensenso_camera_test |
Tests for the ensenso_camera package.
Tests for the ensenso_camera package.
|
|
| 1 | 2024-10-28 | ensenso_camera_msgs |
Message definitions for the ensenso_camera package.
Message definitions for the ensenso_camera package.
|
|
| 1 | 2024-10-28 | ensenso_camera |
Driver for Ensenso stereo cameras.
Driver for Ensenso stereo cameras.
|
|
| 1 | 2024-10-26 | pose_cov_ops |
C++ library for SE(2)/SE(3) pose composition operations with uncertainty
C++ library for SE(2)/SE(3) pose composition operations with uncertainty
|
|
| 1 | 2024-10-25 | lanelet2_validation |
Package for sanitizing lanelet maps
Package for sanitizing lanelet maps
|
|
| 1 | 2024-10-25 | lanelet2_traffic_rules |
Package for interpreting traffic rules in a lanelet map
Package for interpreting traffic rules in a lanelet map
|
|
| 1 | 2024-10-25 | lanelet2_routing |
Routing module for lanelet2
Routing module for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_python |
Python bindings for lanelet2
Python bindings for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_projection |
Lanelet2 projection library for lat/lon to local x/y conversion
Lanelet2 projection library for lat/lon to local x/y conversion
|
|
| 1 | 2024-10-25 | lanelet2_matching |
Library to match objects to lanelets
Library to match objects to lanelets
|
|
| 1 | 2024-10-25 | lanelet2_maps |
Example maps in the lanelet2-format
Example maps in the lanelet2-format
|
|
| 1 | 2024-10-25 | lanelet2_io |
Parser/Writer module for lanelet2
Parser/Writer module for lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_examples |
Examples for working with Lanelet2
Examples for working with Lanelet2
|
|
| 1 | 2024-10-25 | lanelet2_core |
Lanelet2 core module
Lanelet2 core module
|
|
| 1 | 2024-10-25 | lanelet2 |
Meta-package for lanelet2
Meta-package for lanelet2
|
|
| 1 | 2024-10-24 | rosbag_snapshot_msgs |
Service and message definitions for rosbag_snapshot
Service and message definitions for rosbag_snapshot
|
|
| 1 | 2024-10-24 | rosbag_snapshot |
The rosbag_snapshot package
The rosbag_snapshot package
|
|
| 2 | 2024-10-24 | rc_genicam_driver |
The rc_genicam_driver provides data from a Roboception rc_visard 3D sensor or rc_cube on several ROS topics.
The rc_genicam_driver provides data from a Roboception rc_visard 3D sensor or rc_cube on several ROS topics.
|
|
| 2 | 2024-10-23 | ur_robot_driver |
The new driver for Universal Robots UR3, UR5 and UR10 robots with CB3 controllers and the e-series.
The new driver for Universal Robots UR3, UR5 and UR10 robots with CB3 controllers and the e-series.
|
|
| 2 | 2024-10-23 | ur_dashboard_msgs |
Messages around the UR Dashboard server.
Messages around the UR Dashboard server.
|
|
| 2 | 2024-10-23 | ur_calibration |
Package for extracting the factory calibration from a UR robot and change it such that it can be used by ur_description to gain a correct URDF
Package for extracting the factory calibration from a UR robot and change it such that it can be used by ur_description to gain a correct URDF
|
|
| 1 | 2024-10-22 | graceful_controller_ros |
A controller. Some say it might be graceful.
A controller. Some say it might be graceful.
|
|
| 1 | 2024-10-22 | graceful_controller |
A controller.
A controller.
|
|
| 2 | 2024-10-18 | variant_topic_tools |
Topic tools for treating messages as variant types.
Topic tools for treating messages as variant types.
|
|
| 2 | 2024-10-18 | variant_msgs |
Variant messages are designed to accommodate the information content of any invariant message. They are truly generic and can freely be converted to and from specific message objects.
Variant messages are designed to accommodate the information content of any invariant message. They are truly generic and can freely be converted to and from specific message objects.
|
|
| 2 | 2024-10-18 | variant |
Meta-package for the universal variant library.
Meta-package for the universal variant library.
|
|
| 2 | 2024-10-18 | rqt_multiplot |
rqt_multiplot provides a GUI plugin for visualizing numeric values in multiple 2D plots using the Qwt plotting backend.
rqt_multiplot provides a GUI plugin for visualizing numeric values in multiple 2D plots using the Qwt plotting backend.
|
|
| 3 | 2024-10-18 | grid_map_visualization |
Configurable tool to visualize grid maps in RViz.
Configurable tool to visualize grid maps in RViz.
|
|
| 3 | 2024-10-18 | grid_map_sdf |
Generates signed distance fields from grid maps.
Generates signed distance fields from grid maps.
|
|
| 3 | 2024-10-18 | grid_map_rviz_plugin |
RViz plugin for displaying grid map messages.
RViz plugin for displaying grid map messages.
|
|
| 3 | 2024-10-18 | grid_map_ros |
ROS interface for the grid map library to manage two-dimensional grid maps with multiple data layers.
ROS interface for the grid map library to manage two-dimensional grid maps with multiple data layers.
|
|
| 3 | 2024-10-18 | grid_map_pcl |
Conversions between grid maps and Point Cloud Library (PCL) types.
Conversions between grid maps and Point Cloud Library (PCL) types.
|
|
| 3 | 2024-10-18 | grid_map_octomap |
Conversions between grid maps and OctoMap types.
Conversions between grid maps and OctoMap types.
|
|
| 3 | 2024-10-18 | grid_map_msgs |
Definition of the multi-layered grid map message type.
Definition of the multi-layered grid map message type.
|
|
| 3 | 2024-10-18 | grid_map_loader |
Loading and publishing grid maps from bag files.
Loading and publishing grid maps from bag files.
|
|
| 3 | 2024-10-18 | grid_map_filters |
Processing grid maps as a sequence of ROS filters.
Processing grid maps as a sequence of ROS filters.
|
|
| 3 | 2024-10-18 | grid_map_demos |
Demo nodes to demonstrate the usage of the grid map library.
Demo nodes to demonstrate the usage of the grid map library.
|
|
| 3 | 2024-10-18 | grid_map_cv |
Conversions between grid maps and OpenCV images.
Conversions between grid maps and OpenCV images.
|
|
| 3 | 2024-10-18 | grid_map_costmap_2d |
Interface for grid maps to the costmap_2d format.
Interface for grid maps to the costmap_2d format.
|
|
| 3 | 2024-10-18 | grid_map_core |
Universal grid map library to manage two-dimensional grid maps with multiple data layers.
Universal grid map library to manage two-dimensional grid maps with multiple data layers.
|
|
| 3 | 2024-10-18 | grid_map |
Meta-package for the universal grid map library.
Meta-package for the universal grid map library.
|
|
| 1 | 2024-10-15 | zivid_samples |
Contains C++ and Python samples demonstrating use of the zivid_camera package.
Contains C++ and Python samples demonstrating use of the zivid_camera package.
|
|
| 1 | 2024-10-15 | zivid_interfaces |
Zivid interfaces
Zivid interfaces
|
|
| 1 | 2024-10-15 | zivid_camera |
Driver for using the Zivid 3D cameras in ROS 2.
Driver for using the Zivid 3D cameras in ROS 2.
|
|
| 1 | 2024-10-15 | mcl_3dl |
3-D/6-DOF localization for mobile robots with 3-D LIDAR(s)
3-D/6-DOF localization for mobile robots with 3-D LIDAR(s)
|
|
| 1 | 2024-10-14 | twist_controller |
A ros_control controller accepting Cartesian twist messages in order to move a robot manipulator.
It uses a Cartesian interface to the robot, so that the robot hardware takes care about
doing the inverse kinematics. This could be used e.g. for visual servoing applications.
A ros_control controller accepting Cartesian twist messages in order to move a robot manipulator.
It uses a Cartesian interface to the robot, so that the robot hardware takes care about
doing the inverse kinematics. This could be used e.g. for visual servoing applications.
|
|
| 1 | 2024-10-14 | speed_scaling_state_controller |
ROS controller providing reading the state of speed scaling on the robot
ROS controller providing reading the state of speed scaling on the robot
|
|
| 1 | 2024-10-14 | speed_scaling_interface |
Hardware interface reading a scalar value from robot hardware.
Hardware interface reading a scalar value from robot hardware.
|
|
| 1 | 2024-10-14 | scaled_joint_trajectory_controller |
Provides controllers that use the speed scaling interface.
Provides controllers that use the speed scaling interface.
|
|
| 1 | 2024-10-14 | scaled_controllers |
scaled controllers metapackage
scaled controllers metapackage
|
|
| 1 | 2024-10-14 | ros_controllers_cartesian |
Metapackage for Cartesian ROS controllers
Metapackage for Cartesian ROS controllers
|
|
| 1 | 2024-10-14 | pass_through_controllers |
Trajectory controllers (joint-based and Cartesian) that forward trajectories
directly to a robot controller and let it handle trajectory interpolation and execution.
Trajectory controllers (joint-based and Cartesian) that forward trajectories
directly to a robot controller and let it handle trajectory interpolation and execution.
|
|
| 1 | 2024-10-14 | cartesian_trajectory_interpolation |
Cartesian trajectory interpolation as a standalone library
Cartesian trajectory interpolation as a standalone library
|
|
| 1 | 2024-10-14 | cartesian_trajectory_controller |
A Cartesian trajectory controller with multiple hardware interface support
A Cartesian trajectory controller with multiple hardware interface support
|
|
| 1 | 2024-10-14 | cartesian_interface |
Defines a hardware interface to send Cartesian commands to a robot hardware and read
Cartesian states.
Defines a hardware interface to send Cartesian commands to a robot hardware and read
Cartesian states.
|
|
| 1 | 2024-10-13 | warehouse_ros_sqlite |
Implementation of warehouse_ros for sqlite
Implementation of warehouse_ros for sqlite
|
|
| 1 | 2024-10-13 | warehouse_ros |
Persistent storage of ROS messages
Persistent storage of ROS messages
|
|
| 1 | 2024-10-13 | random_numbers |
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
This library contains wrappers for generating floating point values, integers, quaternions using boost libraries.
The constructor of the wrapper is guaranteed to be thread safe and initialize its random number generator to a random seed.
Seeds are obtained using a separate and different random number generator.
|
|
| 1 | 2024-10-13 | agni_tf_tools |
This package provides a gui program as well as a rviz plugin to publish static transforms.
Both support the transformation between various Euler angle representations.
The rviz plugin also allows to configure the transform with an interactive marker.
This package provides a gui program as well as a rviz plugin to publish static transforms.
Both support the transformation between various Euler angle representations.
The rviz plugin also allows to configure the transform with an interactive marker.
|
|
| 1 | 2024-10-10 | test_mavros |
Tests for MAVROS package
Tests for MAVROS package
|
|
| 2 | 2024-10-10 | robot_self_filter |
Filters the robot's body out of point clouds.
Filters the robot's body out of point clouds.
|
|
| 1 | 2024-10-10 | mavros_msgs |
mavros_msgs defines messages for
mavros_msgs defines messages for
|
|
| 1 | 2024-10-10 | mavros_extras |
Extra nodes and plugins for
Extra nodes and plugins for
|
|
| 1 | 2024-10-10 | mavros |
MAVROS -- MAVLink extendable communication node for ROS
with proxy for Ground Control Station.
MAVROS -- MAVLink extendable communication node for ROS
with proxy for Ground Control Station.
|
|
| 1 | 2024-10-10 | libmavconn |
MAVLink communication library.
This library provide unified connection handling classes
and URL to connection object mapper.
This library can be used in standalone programs.
MAVLink communication library.
This library provide unified connection handling classes
and URL to connection object mapper.
This library can be used in standalone programs.
|
|
| 2 | 2024-10-09 | sbg_driver |
ROS driver package for communication with the SBG navigation systems.
ROS driver package for communication with the SBG navigation systems.
|
|
| 1 | 2024-10-09 | mrpt_msgs |
ROS messages for MRPT classes and objects
ROS messages for MRPT classes and objects
|
|
| 1 | 2024-10-08 | trac_ik_python |
The trac_ik_python package contains a python wrapper using SWIG
for trac_ik_lib
The trac_ik_python package contains a python wrapper using SWIG
for trac_ik_lib
|
|
| 1 | 2024-10-08 | trac_ik_lib |
TRAC-IK is a faster, significantly more reliable drop-in replacement for
KDL's pseudoinverse Jacobian solver.
The TRAC-IK library has a very similar API to KDL's IK solver calls,
except that the user passes a maximum time instead of a maximum number of
search iterations. Additionally, TRAC-IK allows for error tolerances to
be set independently for each Cartesian dimension (x,y,z,roll,pitch.yaw).
TRAC-IK is a faster, significantly more reliable drop-in replacement for
KDL's pseudoinverse Jacobian solver.
The TRAC-IK library has a very similar API to KDL's IK solver calls,
except that the user passes a maximum time instead of a maximum number of
search iterations. Additionally, TRAC-IK allows for error tolerances to
be set independently for each Cartesian dimension (x,y,z,roll,pitch.yaw).
|
|
| 1 | 2024-10-08 | trac_ik_kinematics_plugin |
A MoveIt! Kinematics plugin using TRAC-IK
A MoveIt! Kinematics plugin using TRAC-IK
|
|
| 1 | 2024-10-08 | trac_ik_examples |
This package contains the source code for testing and comparing trac_ik
This package contains the source code for testing and comparing trac_ik
|
|
| 1 | 2024-10-08 | trac_ik |
The ROS packages in this repository were created to provide an improved
alternative Inverse Kinematics solver to the popular inverse Jacobian
methods in KDL. TRAC-IK handles joint-limited chains better than KDL
without increasing solve time.
The ROS packages in this repository were created to provide an improved
alternative Inverse Kinematics solver to the popular inverse Jacobian
methods in KDL. TRAC-IK handles joint-limited chains better than KDL
without increasing solve time.
|
|
| 2 | 2024-09-24 | pr2_run_stop_auto_restart |
This package provides a node that monitors the state of the run stops of the pr2_robot. When the state of the
run stop changes from off to on, this node will automatically enable the power to the motors, and reset
the motors. This allows you to use the run stop as a 'pause' button. By using the run stop as a tool to
power up the robot, the run stop is also in reach of the user once the robot starts moving.
This package provides a node that monitors the state of the run stops of the pr2_robot. When the state of the
run stop changes from off to on, this node will automatically enable the power to the motors, and reset
the motors. This allows you to use the run stop as a 'pause' button. By using the run stop as a tool to
power up the robot, the run stop is also in reach of the user once the robot starts moving.
|
|
| 2 | 2024-09-24 | pr2_robot |
This stack collects PR2-specific components that are used in bringing up
a robot.
This stack collects PR2-specific components that are used in bringing up
a robot.
|
|
| 3 | 2024-09-24 | pr2_ethercat_drivers |
This stack contains drivers for the ethercat system and the peripherals
that connect to it: motor control boards, fingertip sensors, texture
projector, hand accelerometer.
This stack contains drivers for the ethercat system and the peripherals
that connect to it: motor control boards, fingertip sensors, texture
projector, hand accelerometer.
|
|
| 2 | 2024-09-24 | pr2_ethercat |
Main loop that runs the robot.
Main loop that runs the robot.
|
|
| 2 | 2024-09-24 | pr2_controller_configuration |
Configuration files for PR2 controllers.
Configuration files for PR2 controllers.
|
|
| 2 | 2024-09-24 | pr2_computer_monitor |
Monitors the computer's processor and hard drives of the PR2 and publishes data to diagnostics.
Monitors the computer's processor and hard drives of the PR2 and publishes data to diagnostics.
|
|
| 2 | 2024-09-24 | pr2_camera_synchronizer |
|
|
| 2 | 2024-09-24 | pr2_bringup |
Launch files and scripts needed to bring a PR2 up into a running state.
Launch files and scripts needed to bring a PR2 up into a running state.
|
|
| 2 | 2024-09-24 | imu_monitor |
This package contains a single node that monitors the drift of the IMU
gyroscopes. The results are published to the '/diagnostics' topic and
are aggregated in the PR2 dashboard.
This package contains a single node that monitors the drift of the IMU
gyroscopes. The results are published to the '/diagnostics' topic and
are aggregated in the PR2 dashboard.
|
|
| 3 | 2024-09-24 | fingertip_pressure |
This package provides access to the PR2 fingertip pressure sensors. This information includes:
This package provides access to the PR2 fingertip pressure sensors. This information includes:
|
|
| 3 | 2024-09-24 | ethercat_hardware |
Package for creating a hardware interface to the robot using the EtherCAT motor controller/driver
Package for creating a hardware interface to the robot using the EtherCAT motor controller/driver
|
|
| 1 | 2024-09-20 | mrt_cmake_modules |
CMake Functions and Modules for automating CMake
CMake Functions and Modules for automating CMake
|
|
| 1 | 2024-09-20 | costmap_converter |
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
A ros package that includes plugins and nodes to convert occupied costmap2d cells to primitive types.
|
|
| 1 | 2024-09-17 | mrpt_tutorials |
Example files used as tutorials for MRPT ROS packages
Example files used as tutorials for MRPT ROS packages
|
|
| 1 | 2024-09-17 | mrpt_reactivenav2d |
Reactive navigation for 2D robots using MRPT navigation algorithms (TP-Space)
Reactive navigation for 2D robots using MRPT navigation algorithms (TP-Space)
|
|
| 1 | 2024-09-17 | mrpt_rawlog |
This package provides nodes to record and play MRPT rawlogs.
This package provides nodes to record and play MRPT rawlogs.
|
|
| 1 | 2024-09-17 | mrpt_navigation |
Tools related to the Mobile Robot Programming Toolkit (MRPT).
Refer to https://wiki.ros.org/mrpt_navigation for further documentation.
Tools related to the Mobile Robot Programming Toolkit (MRPT).
Refer to https://wiki.ros.org/mrpt_navigation for further documentation.
|
|
| 1 | 2024-09-17 | mrpt_msgs_bridge |
C++ library to convert between custom mrpt_msgs messages and native MRPT classes
C++ library to convert between custom mrpt_msgs messages and native MRPT classes
|
|
| 1 | 2024-09-17 | mrpt_map |
The mrpt_map is able to publish a mrpt map as ros occupancy grid like the map_server
The mrpt_map is able to publish a mrpt map as ros occupancy grid like the map_server
|
|
| 1 | 2024-09-17 | mrpt_localization |
Package for robot 2D self-localization using dynamic or static (MRPT or ROS) maps.
The interface is similar to amcl (https://wiki.ros.org/amcl)
but supports different particle-filter algorithms, several grid maps at
different heights, range-only localization, etc.
Package for robot 2D self-localization using dynamic or static (MRPT or ROS) maps.
The interface is similar to amcl (https://wiki.ros.org/amcl)
but supports different particle-filter algorithms, several grid maps at
different heights, range-only localization, etc.
|
|
| 1 | 2024-09-17 | mrpt_local_obstacles |
Maintains a local obstacle map (point cloud,
voxels or occupancy grid) from recent sensor readings within a
configurable time window.
Maintains a local obstacle map (point cloud,
voxels or occupancy grid) from recent sensor readings within a
configurable time window.
|
|
| 2 | 2024-09-14 | libpointmatcher |
libpointmatcher is a modular ICP library, useful for robotics and computer vision.
libpointmatcher is a modular ICP library, useful for robotics and computer vision.
|
|
| 1 | 2024-09-06 | tile_map |
Tile map provides a slippy map style interface for visualizing
OpenStreetMap and GooleMap tiles. A mapviz visualization plug-in is also
implemented
Tile map provides a slippy map style interface for visualizing
OpenStreetMap and GooleMap tiles. A mapviz visualization plug-in is also
implemented
|
|
| 1 | 2024-09-06 | multires_image |
multires_image
multires_image
|